Ibrahim Can
Research Subjects
Research Interests
Ibrahim Can has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Ilker Sugozu
Mersin
3 shared publicationsCengiz Oner
Elazığ
2 shared publicationsCengiz Öner
2 shared publications- Dogan Engin Alnak
Sivas Cumhuriyet University
2 shared publications - Muhammed Sipahi
Sivas Cumhuriyet University
2 shared publications - Abdullah Kapıcıoğlu
Sivas Cumhuriyet Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 30 June 2025
- Published by International Journal of Innovative Engineering Applications in International Journal of Innovative Engineering Applications
- Vol. 9 (1) , 108-116
Cooling System Analysis of Gas Turbine Blades Manufactured Using Different Material Types
One of the major challenges in gas turbine engines is that the blades operate at temperatures higher than the melting points of the materials they are made of. Researchers have focused on developing materials that can withstand high temperatures and designing effective cooling systems for the blades. Although there are limitations to the improvements that can be achieved through material technology, the importance of cooling is clear, and it is considered a critical factor for achieving high efficiency in turbines. To this end, two cooling models were developed using different materials, and the heat transfer in the blades was analyzed numerically using the SolidWorks package program and Ansys. The study considered titanium carbide (TiC) and third-generation single crystal super-alloy CMSX-10 materials. The blade designs were proposed based on the analysis results. The analysis showed that the enhanced model performed better when used with CMSX-10 material in terms of thermal properties.
- 30 June 2025
- Published by International Journal of Innovative Engineering Applications in International Journal of Innovative Engineering Applications
- Vol. 9 (1) , 108-116
Open AccessCooling System Analysis of Gas Turbine Blades Manufactured Using Different Material Types
One of the major challenges in gas turbine engines is that the blades operate at temperatures higher than the melting points of the materials they are made of. Researchers have focused on developing materials that can withstand high temperatures and designing effective cooling systems for the blades. Although there are limitations to the improvements that can be achieved through material technology, the importance of cooling is clear, and it is considered a critical factor for achieving high efficiency in turbines. To this end, two cooling models were developed using different materials, and the heat transfer in the blades was analyzed numerically using the SolidWorks package program and Ansys. The study considered titanium carbide (TiC) and third-generation single crystal super-alloy CMSX-10 materials. The blade designs were proposed based on the analysis results. The analysis showed that the enhanced model performed better when used with CMSX-10 material in terms of thermal properties.
- 6 July 2023
- Published by International Journal of Innovative Engineering Applications in International Journal of Innovative Engineering Applications
- Vol. 7 (1) , 135-139
CFD Analysis of an Aircraft Turbofan Engine Combustion Process and the Effect on Turbine
In this paper, a two-dimensional computational fluid dynamics (CFD) study of Turbofan engine is presented using the ANSYS Fluent program, the navier–stokes equations is used for analysis, including a two-dimensional and symmetrical drawing of both the combustion chamber and in a 1.5 Stage Axial Flow Turbine. A GE-90 turbofan engine nacelle was used with Naca 63-412 type blades were used for the analysis of the flow on the turbine blades. Combustion chamber simulations were carried out using a previous study. The computational results were compared with other studies on the Exergetic analysis of a GE-21 turbojet engine. The GE-21 engine had a combustion chamber temperature of 2900 K, while the GE-90 engine had a temperature of around 2706 K. The previous study considered the velocity of fluid flow to be 200 m/s, whereas the velocity of flow in this study was 209 m/s as determined in the part of analysis and result.
- 6 July 2023
- Published by International Journal of Innovative Engineering Applications in International Journal of Innovative Engineering Applications
- Vol. 7 (1) , 135-139
CFD Analysis of an Aircraft Turbofan Engine Combustion Process and the Effect on Turbine
In this paper, a two-dimensional computational fluid dynamics (CFD) study of Turbofan engine is presented using the ANSYS Fluent program, the navier–stokes equations is used for analysis, including a two-dimensional and symmetrical drawing of both the combustion chamber and in a 1.5 Stage Axial Flow Turbine. A GE-90 turbofan engine nacelle was used with Naca 63-412 type blades were used for the analysis of the flow on the turbine blades. Combustion chamber simulations were carried out using a previous study. The computational results were compared with other studies on the Exergetic analysis of a GE-21 turbojet engine. The GE-21 engine had a combustion chamber temperature of 2900 K, while the GE-90 engine had a temperature of around 2706 K. The previous study considered the velocity of fluid flow to be 200 m/s, whereas the velocity of flow in this study was 209 m/s as determined in the part of analysis and result.
- 29 December 2020
- Published by Cumhuriyet University in Cumhuriyet Science Journal
- Vol. 41 (4) , 1005-1014
2-Dimensional Investigations of In-Cyclinder Flow and Turbulence at Suction Stroke in Internal Combustion 4-Stroke Engines
Studies and experiments conducted for the performance enhancement of internal combustion engines are of great importance. Today, challenges encountered in securing energy resources, the incremental costs and environmental factors constantly remind us that we should not ignore fuel economy in motor vehicles. Studies conducted in this framework focus on lower fuel consumption and less exhaust emissions while improving performance. Undoubtedly, combustion chamber designs and charge systems have a great effect on exhaust emissions and performance. For this reason, a suction stroke was modeled in two dimensions using the fluent software to better understand the charge systems in internal combustion engines. The design was based on 1600 cc Fiat engine measurements and engine geometry was defined. CFD (Computational Fluid Dynamics) software was used to investigate the valve opening and cylinder and combustion chamber air motion at 900, 3000, 5000 rev-1 RPM and the results were discussed in detail. CFD results will assist engine designers in understanding the effects of suction system and its components on various parameters.
- 29 December 2020
- Published by Cumhuriyet University in Cumhuriyet Science Journal
- Vol. 41 (4) , 1005-1014
2-Dimensional Investigations of In-Cyclinder Flow and Turbulence at Suction Stroke in Internal Combustion 4-Stroke Engines
Studies and experiments conducted for the performance enhancement of internal combustion engines are of great importance. Today, challenges encountered in securing energy resources, the incremental costs and environmental factors constantly remind us that we should not ignore fuel economy in motor vehicles. Studies conducted in this framework focus on lower fuel consumption and less exhaust emissions while improving performance. Undoubtedly, combustion chamber designs and charge systems have a great effect on exhaust emissions and performance. For this reason, a suction stroke was modeled in two dimensions using the fluent software to better understand the charge systems in internal combustion engines. The design was based on 1600 cc Fiat engine measurements and engine geometry was defined. CFD (Computational Fluid Dynamics) software was used to investigate the valve opening and cylinder and combustion chamber air motion at 900, 3000, 5000 rev-1 RPM and the results were discussed in detail. CFD results will assist engine designers in understanding the effects of suction system and its components on various parameters.
- 3 July 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (7-8) , 685-689
Friction behavior of granite powder added brake pads
Brake linings used in automotive disks are usually composed of various components. The expected properties of a brake lining are the standard values of wear resistance, friction coefficient and the economical manufacturing. Brake lining extremely warms up during braking due to friction. The braking performance of braking lining can change or the braking lining undergoes mechanical deformation due to excessive temperature. In this study, the effect of granite powder in the brake friction material on various aspects of friction characteristics were investigated. Three friction material specimens were produced based on an experimental formulation, and they contained 2, 6 and 10 % granite powder, respectively, with fixed composition of the other ingredients. Tribological properties of the friction materials were obtained using a brake dynamometer. Results showed that the friction materials containing 2 and 6 % granite powder had improved friction stability and fade resistance.
- 3 July 2015
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 57 (7-8) , 685-689
Friction behavior of granite powder added brake pads
Brake linings used in automotive disks are usually composed of various components. The expected properties of a brake lining are the standard values of wear resistance, friction coefficient and the economical manufacturing. Brake lining extremely warms up during braking due to friction. The braking performance of braking lining can change or the braking lining undergoes mechanical deformation due to excessive temperature. In this study, the effect of granite powder in the brake friction material on various aspects of friction characteristics were investigated. Three friction material specimens were produced based on an experimental formulation, and they contained 2, 6 and 10 % granite powder, respectively, with fixed composition of the other ingredients. Tribological properties of the friction materials were obtained using a brake dynamometer. Results showed that the friction materials containing 2 and 6 % granite powder had improved friction stability and fade resistance.
- 2 September 2014
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 66 (6) , 678-684
Investigation of using Calabrian pine cone dust and borax in brake pads
Purpose: – The purpose of this paper is to investigate use of calabrian pine (pinus brutia) cone (CPC) dust along with borax (BX) to assess the effect of friction coefficient. Despite the number of research studies completed on the mechanism of friction in automotive brake lining materials, the phenomenon is still not fully understood. Complex mechano-chemical processes occurring on the friction interface of a composite friction material make it difficult to understand the correlation between the formulation of brake lining and the frictional performance. Design/methodology/approach: – In this study, the use of CPC dust along with BX has been investigated for assessing the effect on friction coefficient. CPC has resin in it. BX is a boron production which is widely used in boron glass production and in ceramic industry for increasing the heat- resistant and -forming abrasion resistant. Newly formulated brake lining material with five different ingredients has been tested under Friction Assessment and Screening Test. Friction coefficient, wear rate and scanning electron microscope for friction surface were examined to assess the performance of these samples. Findings: – Analysis of the experimental results shows that the brake lining material containing CPC and BX significantly improved the stability of the friction coefficient, fade and wear resistance. Originality/value: – Several investigations have been conducted to use different materials in brake pads. The brake pad standards have been provided in previous studies, as well as the aims for economical and sustainable production. In the present study, production of brake pads by CPC dust and BX has been executed. Parallel results have been presented between previously reported and present study, in view of brake characteristics and wear resistance. Use of the lower cost and productive organic sources of material are the main improvement of the present study.
- 2 September 2014
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 66 (6) , 678-684
Investigation of using Calabrian pine cone dust and borax in brake pads
Purpose: – The purpose of this paper is to investigate use of calabrian pine (pinus brutia) cone (CPC) dust along with borax (BX) to assess the effect of friction coefficient. Despite the number of research studies completed on the mechanism of friction in automotive brake lining materials, the phenomenon is still not fully understood. Complex mechano-chemical processes occurring on the friction interface of a composite friction material make it difficult to understand the correlation between the formulation of brake lining and the frictional performance. Design/methodology/approach: – In this study, the use of CPC dust along with BX has been investigated for assessing the effect on friction coefficient. CPC has resin in it. BX is a boron production which is widely used in boron glass production and in ceramic industry for increasing the heat- resistant and -forming abrasion resistant. Newly formulated brake lining material with five different ingredients has been tested under Friction Assessment and Screening Test. Friction coefficient, wear rate and scanning electron microscope for friction surface were examined to assess the performance of these samples. Findings: – Analysis of the experimental results shows that the brake lining material containing CPC and BX significantly improved the stability of the friction coefficient, fade and wear resistance. Originality/value: – Several investigations have been conducted to use different materials in brake pads. The brake pad standards have been provided in previous studies, as well as the aims for economical and sustainable production. In the present study, production of brake pads by CPC dust and BX has been executed. Parallel results have been presented between previously reported and present study, in view of brake characteristics and wear resistance. Use of the lower cost and productive organic sources of material are the main improvement of the present study.
- 1 May 2014
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 56 (5) , 362-368
The Effect of Borax on the Friction Performance of an Automotive Brake Lining
In this study the effect of refined boron product borax on friction and wear performance of various brake friction couples were investigated. Different amounts of borax were used in the mix with other regular ingredients in the respective brake pad. Newly formulated brake pad material with nine different ingredients was tested using friction assessment and screening test (FAST). Among such specimens, only half of the samples (shown with H indices) were heat treated for 4 h at 180 °C. The friction coefficient as well as the wear rate were determined and the friction surfaces were examined by scanning electron microscope (SEM) to assess the performance of these samples. The heat treated sample that was reinforced with 12 % borax exhibited the optimum friction and wear behaviour. With increasing friction surface temperature, a reduction of the friction coefficient of the samples was observed. The lowest reduction of the friction coefficient was observed the 8 % and 12 % borax reinforced and heat treated samples.
- 1 May 2014
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 56 (5) , 362-368
The Effect of Borax on the Friction Performance of an Automotive Brake Lining
In this study the effect of refined boron product borax on friction and wear performance of various brake friction couples were investigated. Different amounts of borax were used in the mix with other regular ingredients in the respective brake pad. Newly formulated brake pad material with nine different ingredients was tested using friction assessment and screening test (FAST). Among such specimens, only half of the samples (shown with H indices) were heat treated for 4 h at 180 °C. The friction coefficient as well as the wear rate were determined and the friction surfaces were examined by scanning electron microscope (SEM) to assess the performance of these samples. The heat treated sample that was reinforced with 12 % borax exhibited the optimum friction and wear behaviour. With increasing friction surface temperature, a reduction of the friction coefficient of the samples was observed. The lowest reduction of the friction coefficient was observed the 8 % and 12 % borax reinforced and heat treated samples.
- 1 November 2013
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 5 (6) , 069901
Erratum: “Experimental investigation effects of blend hazelnut oil on compression ignition engine performance characteristics and emission,” [J. Renewable Sustainable Energy 4, 042701 (2012)]
- 1 November 2013
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 5 (6) , 069901
Erratum: “Experimental investigation effects of blend hazelnut oil on compression ignition engine performance characteristics and emission,” [J. Renewable Sustainable Energy 4, 042701 (2012)]
- 1 May 2013
- Published by Taylor & Francis in Journal of the Energy Institute
- Vol. 86 (2) , 113-118
Experimental investigation of effect of stratified charging system adopted to gasoline engine running with LPG on engine performance
- 1 May 2013
- Published by Taylor & Francis in Journal of the Energy Institute
- Vol. 86 (2) , 113-118
Experimental investigation of effect of stratified charging system adopted to gasoline engine running with LPG on engine performance
- 1 July 2012
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 4 (4)
Experimental investigation effects of blend hazelnut oil on compression ignition engine performance characteristics and emission
Studies on alternative fuels are important due to the worldwide depletion and accelerated exploitation of oil reserves. In this study, experiments were conducted to study the performance, emission, and specific fuel consumption of a compression ignition (CI) engine using hazelnut oil-based fuels. The main problems posed when using vegetable oil in a compression ignition engine are poor atomization, carbon deposits, ring sticking, etc. This is because of the high viscosity and low volatility of vegetable oil. The blending of hazelnut oil with diesel fuel has been shown to be an effective method to reduce engine problems associated with the high viscosity of hazelnut oil. A number of tests are conducted in a CI engine using different fuel mix ratios. To validate the result, the trials are repeated three times. The engine works at a fixed full load, but at different speeds, i.e., 1000 rpm, 1500 rpm, 2000 rpm, 2500 rpm, 3000 rpm, and 3500 rpm. The performance, specific fuel consumption, and the emission characteristics of exhaust gases of the engine are analyzed and compared. Measurements have indicated a negligible loss of engine power, a slight increase in specific fuel consumption, and a reduction in engine nitrogen oxides, hydrocarbons, and soot emission using blends of hazelnut oil with diesel fuel as compared to diesel fuel. The reduction in engine soot emission has been observed to increase with the increase of hazelnut oil percentage in the fuel blend.
- 1 July 2012
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 4 (4)
Experimental investigation effects of blend hazelnut oil on compression ignition engine performance characteristics and emission
Studies on alternative fuels are important due to the worldwide depletion and accelerated exploitation of oil reserves. In this study, experiments were conducted to study the performance, emission, and specific fuel consumption of a compression ignition (CI) engine using hazelnut oil-based fuels. The main problems posed when using vegetable oil in a compression ignition engine are poor atomization, carbon deposits, ring sticking, etc. This is because of the high viscosity and low volatility of vegetable oil. The blending of hazelnut oil with diesel fuel has been shown to be an effective method to reduce engine problems associated with the high viscosity of hazelnut oil. A number of tests are conducted in a CI engine using different fuel mix ratios. To validate the result, the trials are repeated three times. The engine works at a fixed full load, but at different speeds, i.e., 1000 rpm, 1500 rpm, 2000 rpm, 2500 rpm, 3000 rpm, and 3500 rpm. The performance, specific fuel consumption, and the emission characteristics of exhaust gases of the engine are analyzed and compared. Measurements have indicated a negligible loss of engine power, a slight increase in specific fuel consumption, and a reduction in engine nitrogen oxides, hydrocarbons, and soot emission using blends of hazelnut oil with diesel fuel as compared to diesel fuel. The reduction in engine soot emission has been observed to increase with the increase of hazelnut oil percentage in the fuel blend.