Steffen Hansen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Steffen Hansen has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Nils Pohl
Ruhr University Bochum
7 shared publications - Christian Bredendiek
Fraunhofer FHR, Wachtberg, Germany
4 shared publications Gunnar Briese
Institute for High Frequency Physics and Radar Techniques FHR, 53343 Wachtberg, Germany
3 shared publications- Alexander Orth
Institute of Integrated Systems, Ruhr University Bochum, Bochum, Germany
1 shared publication Andre Froehly
Institute for High Frequency Physics and Radar Techniques FHR, 53343 Wachtberg, Germany
1 shared publication- Benedikt Welp
Department of Integrated Circuits and Sensor Systems, Fraunhofer Institute for High Frequency Physics and Radar Techniques, Wachtberg, Germany
1 shared publication
Latest Publications
- Open Access
- 26 August 2025
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 17 (9) , 1603-1615
A high-resolution 300-GHz FMCW-radar sensor using a dual-function SiGe transceiver MMIC
This article presents a highly integrated 300-GHz frequency-modulated continuous wave radar sensor using a custom-developed dual-function transceiver MMIC. The system can either be configured as a stand-alone ultra-wide-band radar sensor or as a flexible RF front-end, enabling up-conversion and down-conversion of modulated signals to and from the terahertz range. The transceiver MMIC is manufactured using a 90 nm SiGe BiCMOS process, featuring high-speed hetero-junction bipolar transistors with an $f_{\rm{T}}$ of 300 GHz and $f_{\rm{max}}$ of 520 GHz. Using on-chip antennas and a focusing lens, the EIRP of the system for radar operation is greater than 3.2 dBm in a bandwidth of 54 GHz. The full potential of the system’s 90 GHz tuning range is demonstrated in radar measurements. A calibration method is applied to expand the usable tuning range, achieving an extraordinary spatial resolution of 1.97 mm with a frequency sweep from 330 to 240 GHz in 5 ms for a target at a distance of 0.35 m. The potential industrial use of this spatial resolution is demonstrated in a plastic thickness measurement scenario. Additionally a 100 Mbd OKK communication link with a BER of 0.55% is presented using two systems at 0.3 m distance.- 26 August 2025
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 17 (9) , 1603-1615
Open AccessA high-resolution 300-GHz FMCW-radar sensor using a dual-function SiGe transceiver MMIC
This article presents a highly integrated 300-GHz frequency-modulated continuous wave radar sensor using a custom-developed dual-function transceiver MMIC. The system can either be configured as a stand-alone ultra-wide-band radar sensor or as a flexible RF front-end, enabling up-conversion and down-conversion of modulated signals to and from the terahertz range. The transceiver MMIC is manufactured using a 90 nm SiGe BiCMOS process, featuring high-speed hetero-junction bipolar transistors with an $f_{\rm{T}}$ of 300 GHz and $f_{\rm{max}}$ of 520 GHz. Using on-chip antennas and a focusing lens, the EIRP of the system for radar operation is greater than 3.2 dBm in a bandwidth of 54 GHz. The full potential of the system’s 90 GHz tuning range is demonstrated in radar measurements. A calibration method is applied to expand the usable tuning range, achieving an extraordinary spatial resolution of 1.97 mm with a frequency sweep from 330 to 240 GHz in 5 ms for a target at a distance of 0.35 m. The potential industrial use of this spatial resolution is demonstrated in a plastic thickness measurement scenario. Additionally a 100 Mbd OKK communication link with a BER of 0.55% is presented using two systems at 0.3 m distance. - Open Access
- 8 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 9, 692-704
Dual-Channel FMCW Harmonic Radar With Active Tags at 61/122 GHz for Phase-Based Gait Parameter Monitoring
Optimized rehabilitation after joint replacement surgery or other medical procedures affecting the musculoskeletal system requires practical movement analysis systems that enable the continuous and precise gait monitoring of patients in everyday life. To address this need, we present a system consisting of a frequency-modulated continuous-wave (FMCW) radar sensor and active frequency-doubling tags designed for accurate long-term monitoring. By using a harmonic measurement concept in which the tags double the frequency of the transceiver signal, a high signal-to-interference-and-noise ratio (SINR) is achieved, ensuring that the tags stand out clearly from the clutter produced by the leg. With our system, we particularly focus on a phase-based angle determination within the sagittal plane, enabled by two closely spaced receive antennas, allowing for more accurate and reliable gait monitoring compared to our previous system based on a bilateration method. By utilizing millimeter waves in the frequency range 56-63 GHz for transmission and 112-126 GHz for reception, we achieve a compact sensor size sufficient for the application. Based on measurements taken in a gait laboratory, we demonstrate that our system is capable of measuring the distance and angle between the sensor and tags during gait with an accuracy of up to 1.73 mm and 0.93°, respectively, using a stationary camera-based motion capture (MoCap) system as a reference.
- 8 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Radio Frequency Identification
- Vol. 9, 692-704
Open AccessDual-Channel FMCW Harmonic Radar With Active Tags at 61/122 GHz for Phase-Based Gait Parameter Monitoring
Optimized rehabilitation after joint replacement surgery or other medical procedures affecting the musculoskeletal system requires practical movement analysis systems that enable the continuous and precise gait monitoring of patients in everyday life. To address this need, we present a system consisting of a frequency-modulated continuous-wave (FMCW) radar sensor and active frequency-doubling tags designed for accurate long-term monitoring. By using a harmonic measurement concept in which the tags double the frequency of the transceiver signal, a high signal-to-interference-and-noise ratio (SINR) is achieved, ensuring that the tags stand out clearly from the clutter produced by the leg. With our system, we particularly focus on a phase-based angle determination within the sagittal plane, enabled by two closely spaced receive antennas, allowing for more accurate and reliable gait monitoring compared to our previous system based on a bilateration method. By utilizing millimeter waves in the frequency range 56-63 GHz for transmission and 112-126 GHz for reception, we achieve a compact sensor size sufficient for the application. Based on measurements taken in a gait laboratory, we demonstrate that our system is capable of measuring the distance and angle between the sensor and tags during gait with an accuracy of up to 1.73 mm and 0.93°, respectively, using a stationary camera-based motion capture (MoCap) system as a reference.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Aerospace and Electronic Systems Magazine
- Vol. 40 (6) , 24-29
Emerging Trends in Radar: Harmonic Radar Systems With mmWaves
In contrast to conventional radar, harmonic radar systems utilize two different frequencies for transmission and reception. Therefore, a desired target is equipped with a tag that includes a frequency doubler. It exclusively reflects the signal at twice the originally sent out frequency making this specific target unique. Thus, enabling the key advantage of harmonic radar systems: clutter rejection. However, the range equation of such a system deviates significantly from conventional radar. This is mostly due to the power transfer function of the required doubler. Therefore, achieving sufficient range to satisfy a desired application is challenging. In this article, the measures with which state-of-the-art systems address those challenges are reviewed and explained with the help of this deviating range equation. Furthermore, the article highlights the potential of utilizing active tags as well as other research to increase realizable ranges and the frequencies of harmonic radar into the mmWaves, respectively.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Aerospace and Electronic Systems Magazine
- Vol. 40 (6) , 24-29
Emerging Trends in Radar: Harmonic Radar Systems With mmWaves
In contrast to conventional radar, harmonic radar systems utilize two different frequencies for transmission and reception. Therefore, a desired target is equipped with a tag that includes a frequency doubler. It exclusively reflects the signal at twice the originally sent out frequency making this specific target unique. Thus, enabling the key advantage of harmonic radar systems: clutter rejection. However, the range equation of such a system deviates significantly from conventional radar. This is mostly due to the power transfer function of the required doubler. Therefore, achieving sufficient range to satisfy a desired application is challenging. In this article, the measures with which state-of-the-art systems address those challenges are reviewed and explained with the help of this deviating range equation. Furthermore, the article highlights the potential of utilizing active tags as well as other research to increase realizable ranges and the frequencies of harmonic radar into the mmWaves, respectively.
- Open Access
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (1) , 719-731
A SiGe-Chip-Based D-Band FMCW-Radar Sensor With 53-GHz Tuning Range for High Resolution Measurements in Industrial Applications
The article presents a monostatic D-band frequency-modulated continuous-wave (FMCW) radar based on a fully integrated monostatic single-channel silicon-germanium (SiGe) transceiver (TRX) chip. The chip is fabricated in Infineon's bipolar-complementary metal-oxide-semiconductor (BiCMOS) production technology B11HFC which offers heterojunction bipolar transistors (HBTs) with an $f_{{T}}$ / $f_{{max}}$ of 250 GHz/370 GHz. The monolithic microwave integrated circuits (MMICs) output signal is coupled by a fully differential substrate integrated waveguide (SIW) based coupling network. The output power at the WR-6.5 antenna flange is more than -10 dBm over a bandwidth of 37.5 GHz. For a sweep within a single-loop phase-locked loop (PLL) circuit from 174.5 to 121.5 GHz, a spatial resolution of almost 3 mm with a metallic plate as the target is achieved. The radar provides a small form factor of 2 x 4 x 5 cm³ and low power consumption of 2.2 W at 5 V. Finally, the capabilities of the sensor for non-destructive testing (NDT) are demonstrated using a millimeter scanner. With radar imaging, it was possible to measure the orientation of the fiber layers up to a depth of 7.03 mm.- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (1) , 719-731
Open AccessA SiGe-Chip-Based D-Band FMCW-Radar Sensor With 53-GHz Tuning Range for High Resolution Measurements in Industrial Applications
The article presents a monostatic D-band frequency-modulated continuous-wave (FMCW) radar based on a fully integrated monostatic single-channel silicon-germanium (SiGe) transceiver (TRX) chip. The chip is fabricated in Infineon's bipolar-complementary metal-oxide-semiconductor (BiCMOS) production technology B11HFC which offers heterojunction bipolar transistors (HBTs) with an $f_{{T}}$ / $f_{{max}}$ of 250 GHz/370 GHz. The monolithic microwave integrated circuits (MMICs) output signal is coupled by a fully differential substrate integrated waveguide (SIW) based coupling network. The output power at the WR-6.5 antenna flange is more than -10 dBm over a bandwidth of 37.5 GHz. For a sweep within a single-loop phase-locked loop (PLL) circuit from 174.5 to 121.5 GHz, a spatial resolution of almost 3 mm with a metallic plate as the target is achieved. The radar provides a small form factor of 2 x 4 x 5 cm³ and low power consumption of 2.2 W at 5 V. Finally, the capabilities of the sensor for non-destructive testing (NDT) are demonstrated using a millimeter scanner. With radar imaging, it was possible to measure the orientation of the fiber layers up to a depth of 7.03 mm. - Open Access
- 6 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 906-915
A Compact Harmonic Radar System With Active Tags at 61/122 GHz ISM Band in SiGe BiCMOS for Precise Localization
- 6 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 906-915
Open AccessA Compact Harmonic Radar System With Active Tags at 61/122 GHz ISM Band in SiGe BiCMOS for Precise Localization
- Open Access
- 8 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (3) , 1195-1211
Versatile Dual-Receiver 94-GHz FMCW Radar System With High Output Power and 26-GHz Tuning Range for High Distance Applications
Airborne applications demand exceptional overall radar system performance and eminently high output power for high range target detection. The frequency modulated continuous wave (FMCW) radar system presented in this article is capable of achieving this task due to its high output power at 94-GHz center frequency with over 26-GHz tuning range. Nevertheless, the radar still provides a small form factor and low power consumption of 4.25 W at 5 V single Universal Serial Bus (USB) supply. The key system component is a Silicon Germanium (SiGe) bipolar complementary metal-oxide-semiconductor (BiCMOS) monolithic microwave integrated circuit (MMIC) that contains a 94-GHz voltage-controlled oscillator (VCO), and a 27-GHz VCO for dual-loop phase-locked loop (PLL) stabilization, a power amplifier (PA), and two receive mixers. It generates frequency ramps between 83- and 109-GHz with a maximum output power of 19.7 dBm at its output after the bond wires on the printed circuit board (PCB) and 14.8-dBm output power at the radar's transmit (TX)-waveguide WR-10-flange. The sensor was also tested in a temperature range from -40 °C to +70 °C with menial deviation. Thus, the system offers high system dynamic range and far distance target detection range. Following a detailed system description, we finally present the FMCW range and Doppler measurements performed with the presented radar sensor as well as the application on unmanned aerial vehicles (UAVs) for flight altitude control and as airborne collision avoidance system (ACAS).
- 8 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 68 (3) , 1195-1211
Open AccessVersatile Dual-Receiver 94-GHz FMCW Radar System With High Output Power and 26-GHz Tuning Range for High Distance Applications
Airborne applications demand exceptional overall radar system performance and eminently high output power for high range target detection. The frequency modulated continuous wave (FMCW) radar system presented in this article is capable of achieving this task due to its high output power at 94-GHz center frequency with over 26-GHz tuning range. Nevertheless, the radar still provides a small form factor and low power consumption of 4.25 W at 5 V single Universal Serial Bus (USB) supply. The key system component is a Silicon Germanium (SiGe) bipolar complementary metal-oxide-semiconductor (BiCMOS) monolithic microwave integrated circuit (MMIC) that contains a 94-GHz voltage-controlled oscillator (VCO), and a 27-GHz VCO for dual-loop phase-locked loop (PLL) stabilization, a power amplifier (PA), and two receive mixers. It generates frequency ramps between 83- and 109-GHz with a maximum output power of 19.7 dBm at its output after the bond wires on the printed circuit board (PCB) and 14.8-dBm output power at the radar's transmit (TX)-waveguide WR-10-flange. The sensor was also tested in a temperature range from -40 °C to +70 °C with menial deviation. Thus, the system offers high system dynamic range and far distance target detection range. Following a detailed system description, we finally present the FMCW range and Doppler measurements performed with the presented radar sensor as well as the application on unmanned aerial vehicles (UAVs) for flight altitude control and as airborne collision avoidance system (ACAS).
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 117-120
A Wideband Millimeter-Wave SIW-to-RWG Transition for Thin Single Layer Substrates with Thick Metal Cladding
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 117-120
A Wideband Millimeter-Wave SIW-to-RWG Transition for Thin Single Layer Substrates with Thick Metal Cladding