Carolina Cruz Ferreira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carolina Cruz Ferreira has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Lucíola Lucena de Sousa
Universidade Federal de Alfenas, Brasil
3 shared publications - Neide Aparecida Mariano
Universidade Federal de Alfenas, Brasil
3 shared publications - Eliana Cristina da Silva Rigo
Universidade de São Paulo
2 shared publications Neide Aparecida Mariano
Instituto de Ciência e Tecnologia, Universidade Federal de Alfenas (UNIFAL), Poços de Caldas, Brazil
2 shared publications- Alfeu Saraiva Ramos
Institute of Science and Technology, Federal University of Alfenas, Poços de Caldas, Brazil
1 shared publication Andrés Vercik
Universidade de São Paulo, Brasil
1 shared publication
Latest Publications
- Open Access
- 10 December 2025
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (1) , 338-352
Thermo- and pH-Responsive Antimicrobial Hydrogels from Poly(2-(dimethylamino)ethyl methacrylate) and Cationic-Modified Chitosan for Sustained Papain Release
Semi-interpenetrating polymer networks (semi-IPNs) composed of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and various concentrations of N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC) (5, 10, and 25% w/w) were synthesized and evaluated as matrices for papain loading and sustained delivery. The incorporation of HTCC significantly influenced the structural, swelling, and release properties of the networks. Monomer conversion and gel fraction decreased with increasing HTCC content, reaching 91.26 and 81.36%, respectively, at 25% HTCC. Swelling studies revealed a nonlinear behavior, with the 5% HTCC sample exhibiting the highest swelling degree (458.33%), while pure PDMAEMA and the 25% HTCC formulation reached 219.78 and 168.23%, respectively. Papain release profiles, fitted to the Peppas–Sahlin model, showed diffusion-controlled kinetics, with k 1 values decreasing from 31.89 h–m (PDMAEMA) to 6.14 h–m (PDMAEMA/HTCC25%), indicating hindered diffusion in denser networks, which may be beneficial for a more sustained therapeutic release. Antibacterial assays confirmed the potent activity of HTCC-containing formulations against Staphylococcus aureus, with 25% HTCC demonstrating nearly complete inhibition (∼95%), while no significant inhibition was observed against Escherichia coli, indicating Gram-specific selectivity. Moreover, the 25% HTCC formulation maintained fibroblast viability above 70%, further supporting these hydrogels as bioactive wound dressings combining controlled delivery with antimicrobial activity.
- 10 December 2025
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (1) , 338-352
Open AccessThermo- and pH-Responsive Antimicrobial Hydrogels from Poly(2-(dimethylamino)ethyl methacrylate) and Cationic-Modified Chitosan for Sustained Papain Release
Semi-interpenetrating polymer networks (semi-IPNs) composed of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and various concentrations of N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC) (5, 10, and 25% w/w) were synthesized and evaluated as matrices for papain loading and sustained delivery. The incorporation of HTCC significantly influenced the structural, swelling, and release properties of the networks. Monomer conversion and gel fraction decreased with increasing HTCC content, reaching 91.26 and 81.36%, respectively, at 25% HTCC. Swelling studies revealed a nonlinear behavior, with the 5% HTCC sample exhibiting the highest swelling degree (458.33%), while pure PDMAEMA and the 25% HTCC formulation reached 219.78 and 168.23%, respectively. Papain release profiles, fitted to the Peppas–Sahlin model, showed diffusion-controlled kinetics, with k 1 values decreasing from 31.89 h–m (PDMAEMA) to 6.14 h–m (PDMAEMA/HTCC25%), indicating hindered diffusion in denser networks, which may be beneficial for a more sustained therapeutic release. Antibacterial assays confirmed the potent activity of HTCC-containing formulations against Staphylococcus aureus, with 25% HTCC demonstrating nearly complete inhibition (∼95%), while no significant inhibition was observed against Escherichia coli, indicating Gram-specific selectivity. Moreover, the 25% HTCC formulation maintained fibroblast viability above 70%, further supporting these hydrogels as bioactive wound dressings combining controlled delivery with antimicrobial activity.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20250180
Multilayer Strategies Incorporating Natural Bactericide for Titanium Surface Functionalization
Current development of hybrid and bioactive materials based on consolidated metallic substrates, such as titanium and its alloys, combined with polymeric and ceramic additives has been promoted. These materials, with an emphasis on hydroxyapatite and polycaprolactone, have a high applicability in tissue replacement and regeneration. Since bacterial contamination and biofilm formation are the main causes of post-surgical complications involving implants, the present work proposes a hybrid coating to address these issues. It incorporates Melaleuca alternifolia essential oil as a natural bactericide, into a polymeric PCL layer. This layer was applied over a bioceramic coating on a commercially pure titanium substrate. The surface evolution of the apatite layer was verified through bioactivity tests in simulated body fluid, verifying a homogeneous layer with appreciable globular morphology. In the microbiological assays by disk-diffusion against Staphylococcus aureus and Escherichia coli, the formation of small halos was observed for both cultures. As a result, it is suggested that the proposed hybrid coating may improve the osseointegration process and biocompatibility, indicating the potentiality of prosthetic application in orthopedic medical devices.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20250180
Open AccessMultilayer Strategies Incorporating Natural Bactericide for Titanium Surface Functionalization
Current development of hybrid and bioactive materials based on consolidated metallic substrates, such as titanium and its alloys, combined with polymeric and ceramic additives has been promoted. These materials, with an emphasis on hydroxyapatite and polycaprolactone, have a high applicability in tissue replacement and regeneration. Since bacterial contamination and biofilm formation are the main causes of post-surgical complications involving implants, the present work proposes a hybrid coating to address these issues. It incorporates Melaleuca alternifolia essential oil as a natural bactericide, into a polymeric PCL layer. This layer was applied over a bioceramic coating on a commercially pure titanium substrate. The surface evolution of the apatite layer was verified through bioactivity tests in simulated body fluid, verifying a homogeneous layer with appreciable globular morphology. In the microbiological assays by disk-diffusion against Staphylococcus aureus and Escherichia coli, the formation of small halos was observed for both cultures. As a result, it is suggested that the proposed hybrid coating may improve the osseointegration process and biocompatibility, indicating the potentiality of prosthetic application in orthopedic medical devices.
- 18 November 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (15) , 6759-6769
Modifications in the Surface of Titanium Substrate and the Incorporation of an Essential Oil for Biomaterial Application
- 18 November 2022
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (15) , 6759-6769
Modifications in the Surface of Titanium Substrate and the Incorporation of an Essential Oil for Biomaterial Application
- Open Access
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 1265g5
Biomimetic coating on titanium: evaluation of bioactivity and corrosion
Pure titanium and its alloys have been widely applied as implant material with excellent results in a long term because of their excellent biocompatibility and resistance to corrosion. Biomaterials with porous structure optimize the interfacial resistance between the material and the bone, leading to a more efficient fixation of the implant by bone growth in the pores. Titanium implants covered with calcium phosphates have received increasing application in odontology and orthopedics, and clinical studies indicate that the healthy bone tissue responds positively to the bioceramic surfaces. Calcium phosphates, particularly hydroxyapatite in the form of coating, provide a bioactive surface to the metal, which induces the direct union between the implant and the bone tissue. Consequently, the time for osseointegration and, therefore, the total time for treatment, can be reduced. Researches have been conducted to obtain a coating, in order to enhance the adherence between bone and implant, modifying the metal surface, allowing an efficient regeneration of the bone tissue, osseointegration and accelerating its growth. In this work, the effect of coating by the biomimetic method on a titanium substrate was studied, consisting of the immersion of the substrate in a synthetic SBF (Simulated Body Fluid) solution, with composition, pH and temperature similar to blood plasma. The coating was efficient for obtaining hydroxyapatite, which was confirmed by the techniques of scanning electron microscopy (SEM), X-ray diffraction (XRD) and infrared. The bioactivity assay revealed that the samples which received the coating with 1.5 SBF presented bioactive characteristic by the formation and development of the carbonated hydroxyapatite on the surface, in a superior way to the samples without coating, thus suggesting a fast osseointegration of the bone with the implant. The polarization curves showed that the titanium without coating presented a higher resistance to corrosion compared to the titanium with coating.
- 1 December 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (12) , 1265g5
Open AccessBiomimetic coating on titanium: evaluation of bioactivity and corrosion
Pure titanium and its alloys have been widely applied as implant material with excellent results in a long term because of their excellent biocompatibility and resistance to corrosion. Biomaterials with porous structure optimize the interfacial resistance between the material and the bone, leading to a more efficient fixation of the implant by bone growth in the pores. Titanium implants covered with calcium phosphates have received increasing application in odontology and orthopedics, and clinical studies indicate that the healthy bone tissue responds positively to the bioceramic surfaces. Calcium phosphates, particularly hydroxyapatite in the form of coating, provide a bioactive surface to the metal, which induces the direct union between the implant and the bone tissue. Consequently, the time for osseointegration and, therefore, the total time for treatment, can be reduced. Researches have been conducted to obtain a coating, in order to enhance the adherence between bone and implant, modifying the metal surface, allowing an efficient regeneration of the bone tissue, osseointegration and accelerating its growth. In this work, the effect of coating by the biomimetic method on a titanium substrate was studied, consisting of the immersion of the substrate in a synthetic SBF (Simulated Body Fluid) solution, with composition, pH and temperature similar to blood plasma. The coating was efficient for obtaining hydroxyapatite, which was confirmed by the techniques of scanning electron microscopy (SEM), X-ray diffraction (XRD) and infrared. The bioactivity assay revealed that the samples which received the coating with 1.5 SBF presented bioactive characteristic by the formation and development of the carbonated hydroxyapatite on the surface, in a superior way to the samples without coating, thus suggesting a fast osseointegration of the bone with the implant. The polarization curves showed that the titanium without coating presented a higher resistance to corrosion compared to the titanium with coating.
- Open Access
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Titanium Biomimetically Coated With Hydroxyapatite, Silver Nitrate and Polycaprolactone, for Use In Biomaterials (Biomedicine)
Titanium is used in orthopedic and orthodontic implants because it has good corrosion resistance and excellent biocompatibility. Thus, studies seek to obtain a coating to improve the adhesion between the bone and the implant, by modifying the metal’s surface. The objective of this work was to biomimetically coat C.P. Ti with hydroxyapatite doped with silver nitrate, a component with antimicrobial properties, coating the metallic-ceramic composite with a polycaprolactone polymer film, which is known by generate improved implant-tissue interaction, and reducing postoperative complications from bacterial infections. The characterization of the material demonstrated the existence of the coating overall surface of the metallic substrate. The results obtained from the bacterial culture tests with Staphylococcus aureus showed that nitrate was effective in reducing the amount of live bacteria present in the supernatant, as well as those adhered to the surface of the material. In addition, the polymeric coating did not prevent the release of the bactericidal agent, not interfering in the effect there.
- 1 January 2019
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 22 (suppl 1)
Open AccessTitanium Biomimetically Coated With Hydroxyapatite, Silver Nitrate and Polycaprolactone, for Use In Biomaterials (Biomedicine)
Titanium is used in orthopedic and orthodontic implants because it has good corrosion resistance and excellent biocompatibility. Thus, studies seek to obtain a coating to improve the adhesion between the bone and the implant, by modifying the metal’s surface. The objective of this work was to biomimetically coat C.P. Ti with hydroxyapatite doped with silver nitrate, a component with antimicrobial properties, coating the metallic-ceramic composite with a polycaprolactone polymer film, which is known by generate improved implant-tissue interaction, and reducing postoperative complications from bacterial infections. The characterization of the material demonstrated the existence of the coating overall surface of the metallic substrate. The results obtained from the bacterial culture tests with Staphylococcus aureus showed that nitrate was effective in reducing the amount of live bacteria present in the supernatant, as well as those adhered to the surface of the material. In addition, the polymeric coating did not prevent the release of the bactericidal agent, not interfering in the effect there.
- Open Access
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (suppl 1) , 126-133
Improvement of Titanium Corrosion Resistance by Coating with Poly-Caprolactone and Poly-Caprolactone/Titanium Dioxide: Potential Application in Heart Valves
Heart diseases affect part of world population and generally involves the functioning of valves. Valves replacement is the most common treatment and the choice between synthetic or natural/biological implants depends on several factors. Synthetic implants have greater durability, whereas biological ones are more biocompatible. This work proposes the use of polymeric coating on titanium metal surface to increase implant biocompatibility. Poly-caprolactone (PCL) has demonstrated greater efficacy for biomedical applications due to its biocompatibility. It can easily form films and coat surfaces. Titanium discs were submitted to alkaline and thermal treatments and coated with 1%PCL and 1%PCL+TiO2. For both conditions, PCL crystals were found in titanium coated surface (SEM and EDX) and X-ray diffractogram confirmed PCL coating. Infrared Spectroscopy spectra showed both PCL and TiO2 characteristic peaks. Moreover, corrosion resistance of coated disc has considerably increased, proving the effectiveness of PCL as coating material and its potential application in cardiac valves.
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 20 (suppl 1) , 126-133
Open AccessImprovement of Titanium Corrosion Resistance by Coating with Poly-Caprolactone and Poly-Caprolactone/Titanium Dioxide: Potential Application in Heart Valves
Heart diseases affect part of world population and generally involves the functioning of valves. Valves replacement is the most common treatment and the choice between synthetic or natural/biological implants depends on several factors. Synthetic implants have greater durability, whereas biological ones are more biocompatible. This work proposes the use of polymeric coating on titanium metal surface to increase implant biocompatibility. Poly-caprolactone (PCL) has demonstrated greater efficacy for biomedical applications due to its biocompatibility. It can easily form films and coat surfaces. Titanium discs were submitted to alkaline and thermal treatments and coated with 1%PCL and 1%PCL+TiO2. For both conditions, PCL crystals were found in titanium coated surface (SEM and EDX) and X-ray diffractogram confirmed PCL coating. Infrared Spectroscopy spectra showed both PCL and TiO2 characteristic peaks. Moreover, corrosion resistance of coated disc has considerably increased, proving the effectiveness of PCL as coating material and its potential application in cardiac valves.