Liudmyla Kolianovska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liudmyla Kolianovska has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Andrii Zahorulko
State Biotechnological University
2 shared publications - Nina Budnyk
Poltava State Agrarian University
2 shared publications - Svitlana Ovsienko
Vinnytsia National Agrarian University
2 shared publications - Aleksey Pogarskiy
State Biotechnological University
1 shared publication - Aleksey Zagorulko
State Biotechnological University
1 shared publication - Alla Solomon
Vinnytsia National Agrarian University
1 shared publication
Latest Publications
- Open Access
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (142)) , 34-42
Improving the heat and mass transfer equipment by integrating an adaptive radiant heat supply system
This work investigates heat supply processes in heat and mass exchange equipment for implementing preliminary thermal treatment, concentration, and drying of organic plant raw materials. The task addressed is to reduce the operational complexity, energy and metal consumption in heat and mass exchange equipment with a multi-link thermal system based on intermediate heat carriers. The proposed concept integrates a radiant heat supply system based on a film-like resistive electric heater of the radiant type directly into the heat transfer surfaces. Based on the results from comparing technical and technological indicators, it was established that for a sectional cassette-capacitor apparatus, the usable heat exchange surface increased to 1.47 m2, the specific metal capacity was reduced to 330 kg/m2. For a vacuum evaporator, the usable heat exchange surface increased from 3.70 m2 to 4.15 m2 while specific heat consumption increased by 18.5%. For a rotary film evaporator, specific metal capacity was reduced from 80 kg/m2 to 57.3 kg/m2 and specific heat consumption by 1.9%. For a single-drum roller dryer, specific metal capacity was reduced to 47.0 kg/m2 and specific heat consumption by 10.7%. Integration of the adaptive system contributes to an increase in the usable heat exchange surface of devices under conditions of a decrease in the specific metal capacity and specific heat consumption with a simultaneous decrease in the number of functional links of the basic thermal system to 2…3. The resulting effect is attributed to the integration of the heat source into the heat transfer surfaces while abandoning the component of intermediate heat carriers; a distinctive feature of the concept is the universality of the application of a single approach to improving heat and mass exchange equipment. Practical significance implies implementing the concept to modernize existing and to design new resource-saving heat and mass exchange equipment
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (1 (142)) , 34-42
Open AccessImproving the heat and mass transfer equipment by integrating an adaptive radiant heat supply system
This work investigates heat supply processes in heat and mass exchange equipment for implementing preliminary thermal treatment, concentration, and drying of organic plant raw materials. The task addressed is to reduce the operational complexity, energy and metal consumption in heat and mass exchange equipment with a multi-link thermal system based on intermediate heat carriers. The proposed concept integrates a radiant heat supply system based on a film-like resistive electric heater of the radiant type directly into the heat transfer surfaces. Based on the results from comparing technical and technological indicators, it was established that for a sectional cassette-capacitor apparatus, the usable heat exchange surface increased to 1.47 m2, the specific metal capacity was reduced to 330 kg/m2. For a vacuum evaporator, the usable heat exchange surface increased from 3.70 m2 to 4.15 m2 while specific heat consumption increased by 18.5%. For a rotary film evaporator, specific metal capacity was reduced from 80 kg/m2 to 57.3 kg/m2 and specific heat consumption by 1.9%. For a single-drum roller dryer, specific metal capacity was reduced to 47.0 kg/m2 and specific heat consumption by 10.7%. Integration of the adaptive system contributes to an increase in the usable heat exchange surface of devices under conditions of a decrease in the specific metal capacity and specific heat consumption with a simultaneous decrease in the number of functional links of the basic thermal system to 2…3. The resulting effect is attributed to the integration of the heat source into the heat transfer surfaces while abandoning the component of intermediate heat carriers; a distinctive feature of the concept is the universality of the application of a single approach to improving heat and mass exchange equipment. Practical significance implies implementing the concept to modernize existing and to design new resource-saving heat and mass exchange equipment
- Open Access
- 3 November 2025
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 27 (104) , 22-26
Justification of the use of amaranth flour in fruit and vegetable paste
The article presents the results of a study of the organoleptic and physicochemical properties of fruit and vegetable pastes made from apple and pumpkin in different ratios and enriched with amaranth flour. The relevance of developing functional products that combine high nutritional value, pleasant organoleptic characteristics and prophylactic properties is substantiated. It was determined that among the model samples, the optimal ratio of apples and pumpkin is 50:50, which provides a harmonious sweet-sour taste, a balanced content of organic acids, pectin, sugars and a satisfactory consistency. On this basis, a study was conducted of the effect of adding amaranth flour in an amount of 3, 5 and 7 % on the quality characteristics of the pastes. Organoleptic evaluation showed that the introduction of 3 % flour contributes to the appearance of light nutty-grain shades without deteriorating the properties of the control sample, while the optimal option was the option with 5 % amaranth flour, which was characterized by a rich color, a pleasant thick consistency and a harmonious combination of fruit and nutty notes. The introduction of 7 % flour led to excessive darkening of the color, increased viscosity and dominance of grain tones in the taste. Physico-chemical studies confirmed that with an increase in the proportion of amaranth flour, the moisture and sugar content decrease, but the amount of dry matter, pectin and acidity increase, which improves the structure-forming properties of the paste. The results obtained are consistent with the data of domestic and foreign studies on the high biological value of amaranth, its ability to enrich products with protein, fiber and minerals. It has been shown that the optimal recipe for creating a functional fruit and vegetable paste is a combination of apple and pumpkin in a ratio of 50:50 with the addition of 5 % amaranth flour, which allows you to obtain a product of increased nutritional value, suitable for dietary and functional nutrition.
- 3 November 2025
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 27 (104) , 22-26
Open AccessJustification of the use of amaranth flour in fruit and vegetable paste
The article presents the results of a study of the organoleptic and physicochemical properties of fruit and vegetable pastes made from apple and pumpkin in different ratios and enriched with amaranth flour. The relevance of developing functional products that combine high nutritional value, pleasant organoleptic characteristics and prophylactic properties is substantiated. It was determined that among the model samples, the optimal ratio of apples and pumpkin is 50:50, which provides a harmonious sweet-sour taste, a balanced content of organic acids, pectin, sugars and a satisfactory consistency. On this basis, a study was conducted of the effect of adding amaranth flour in an amount of 3, 5 and 7 % on the quality characteristics of the pastes. Organoleptic evaluation showed that the introduction of 3 % flour contributes to the appearance of light nutty-grain shades without deteriorating the properties of the control sample, while the optimal option was the option with 5 % amaranth flour, which was characterized by a rich color, a pleasant thick consistency and a harmonious combination of fruit and nutty notes. The introduction of 7 % flour led to excessive darkening of the color, increased viscosity and dominance of grain tones in the taste. Physico-chemical studies confirmed that with an increase in the proportion of amaranth flour, the moisture and sugar content decrease, but the amount of dry matter, pectin and acidity increase, which improves the structure-forming properties of the paste. The results obtained are consistent with the data of domestic and foreign studies on the high biological value of amaranth, its ability to enrich products with protein, fiber and minerals. It has been shown that the optimal recipe for creating a functional fruit and vegetable paste is a combination of apple and pumpkin in a ratio of 50:50 with the addition of 5 % amaranth flour, which allows you to obtain a product of increased nutritional value, suitable for dietary and functional nutrition.
- Open Access
- 30 September 2025
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 15 (3) , 87-90
Development and research of W-parameters of potentially unstable four-poles based on the mathematical model of W-parameters of field-effect transistors in the high-frequency range
The models underlying calculations and research provide the developers with information about the behavior of devices during operation. As modern technologies do not provide high accuracy of measurements, the unstructured models are used, in particular, four-poles, which describe electrical circuits through their external characteristics, without taking into account the internal structure. Four-pole parameters, such as conductivities and impedances, can be measured using special methods, which allows effective analysis of the electrical properties of devices and systems.
- 30 September 2025
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 15 (3) , 87-90
Open AccessDevelopment and research of W-parameters of potentially unstable four-poles based on the mathematical model of W-parameters of field-effect transistors in the high-frequency range
The models underlying calculations and research provide the developers with information about the behavior of devices during operation. As modern technologies do not provide high accuracy of measurements, the unstructured models are used, in particular, four-poles, which describe electrical circuits through their external characteristics, without taking into account the internal structure. Four-pole parameters, such as conductivities and impedances, can be measured using special methods, which allows effective analysis of the electrical properties of devices and systems.
- Open Access
- 27 December 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (132)) , 63-72
Determination of the features of the use of three-component vegetable and fruit paste in marmalade technology
The object of the study is the technology of marmalade based on pumpkin, apple and dogwood paste. The development of a vegetable and fruit paste allows to solve the issue of marmalade structure formation, provide high organoleptic quality indicators, without the use of dyes and essences, enrich the chemical composition of products and give functional properties. Due to the use of short-term low-temperature concentration and a well-founded recipe (pumpkin 50 %, apple 35 %, dogwood 15 %). The paste contains a significant amount of functional ingredients, which is confirmed by the study of its chemical composition. The paste has a dynamic viscosity of 280 Pa∙s, a high content of non-starch polysaccharides of 3.89±0.11 g, vitamin C of 1.89±0.05 mg, β-carotene 21.13±0.60. For optimal management of the concentration process (55…65 °C), an effective viscosity is set in the range of 5…35 Paּ∙s. The improved method of producing marmalade based on pumpkin, apple and dogwood paste is characterized by increased quality. The marmalade mass at a temperature of 80…82 °C before gelatinization has a viscosity 24 % higher than the control. The developed marmalade has a pleasant ruby color and a lingering consistency. The content of non-starch polysaccharides, mainly pectin substances and vitamin C increases almost twice. The new marmalade is characterized by the presence of vitamins A, C, E and β-carotene. The number of macro- and microelements increases significantly compared to the control sample. According to the content of non-starch polysaccharides, vitamin A, β-carotene and potassium, marmalade based on vegetable and fruit paste can be classified as functional, since the percentage of provision of these substances per day exceeds 10 %. The method of marmalade production can be implemented at confectionery enterprises
- 27 December 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (132)) , 63-72
Open AccessDetermination of the features of the use of three-component vegetable and fruit paste in marmalade technology
The object of the study is the technology of marmalade based on pumpkin, apple and dogwood paste. The development of a vegetable and fruit paste allows to solve the issue of marmalade structure formation, provide high organoleptic quality indicators, without the use of dyes and essences, enrich the chemical composition of products and give functional properties. Due to the use of short-term low-temperature concentration and a well-founded recipe (pumpkin 50 %, apple 35 %, dogwood 15 %). The paste contains a significant amount of functional ingredients, which is confirmed by the study of its chemical composition. The paste has a dynamic viscosity of 280 Pa∙s, a high content of non-starch polysaccharides of 3.89±0.11 g, vitamin C of 1.89±0.05 mg, β-carotene 21.13±0.60. For optimal management of the concentration process (55…65 °C), an effective viscosity is set in the range of 5…35 Paּ∙s. The improved method of producing marmalade based on pumpkin, apple and dogwood paste is characterized by increased quality. The marmalade mass at a temperature of 80…82 °C before gelatinization has a viscosity 24 % higher than the control. The developed marmalade has a pleasant ruby color and a lingering consistency. The content of non-starch polysaccharides, mainly pectin substances and vitamin C increases almost twice. The new marmalade is characterized by the presence of vitamins A, C, E and β-carotene. The number of macro- and microelements increases significantly compared to the control sample. According to the content of non-starch polysaccharides, vitamin A, β-carotene and potassium, marmalade based on vegetable and fruit paste can be classified as functional, since the percentage of provision of these substances per day exceeds 10 %. The method of marmalade production can be implemented at confectionery enterprises
- 30 August 2024
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 2(113),p. 97-109
USE OF SOYBEAN PROCESSING TECHNOLOGY IN THE PRODUCTION OF HEALTH PRODUCTS
Trends in the development of modern food technologies are aimed at expanding the range of health products. Against the backdrop of popularization and awareness of healthy eating, the population needs new products that would meet the nutritional needs of the body, be inexpensive and enrich the daily diet. Among the proteins of plant origin, soy proteins are the most complete and can serve as an alternative to animal proteins to some extent. Soybeans contain 2 times more protein than bird, fish and animal meat. Soy protein is 2 times cheaper than wheat protein, 14 times cheaper than dairy protein, and more than 21 times cheaper than meat protein. It is this fact that has led to a 7-fold increase in global soybean production over the past 70 years. That is why one of the areas of production of new food products is the use of the basic legume representative – soybeans. The paper presents the development of protein and vitamin concentrate technology and formulations of health products based on soy. The research was conducted using the following methods: causal analysis, experimental, economic and statistical, calculation and design, and logical generalization. As a result of the study, practical recommendations have been developed on the technology of protein and vitamin concentrate and formulations of health products based on soybeans, which allow expanding the range of products for this purpose. The technical specifications «Soybean food products» TU U10.8-24824144966-002: 2021 were also developed and included in the database «Technical Specifications of Ukraine». The scientific novelty of the research results lies in the development of protein-vitamin concentrate technology and formulations of health products based on soybeans approved by the technical specifications. The research results show the possibility of expanding the use of soy-based health foods in the production of health foods, which allows to increase the range of soy products with improved chemical composition.
- 30 August 2024
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 2(113),p. 97-109
USE OF SOYBEAN PROCESSING TECHNOLOGY IN THE PRODUCTION OF HEALTH PRODUCTS
Trends in the development of modern food technologies are aimed at expanding the range of health products. Against the backdrop of popularization and awareness of healthy eating, the population needs new products that would meet the nutritional needs of the body, be inexpensive and enrich the daily diet. Among the proteins of plant origin, soy proteins are the most complete and can serve as an alternative to animal proteins to some extent. Soybeans contain 2 times more protein than bird, fish and animal meat. Soy protein is 2 times cheaper than wheat protein, 14 times cheaper than dairy protein, and more than 21 times cheaper than meat protein. It is this fact that has led to a 7-fold increase in global soybean production over the past 70 years. That is why one of the areas of production of new food products is the use of the basic legume representative – soybeans. The paper presents the development of protein and vitamin concentrate technology and formulations of health products based on soy. The research was conducted using the following methods: causal analysis, experimental, economic and statistical, calculation and design, and logical generalization. As a result of the study, practical recommendations have been developed on the technology of protein and vitamin concentrate and formulations of health products based on soybeans, which allow expanding the range of products for this purpose. The technical specifications «Soybean food products» TU U10.8-24824144966-002: 2021 were also developed and included in the database «Technical Specifications of Ukraine». The scientific novelty of the research results lies in the development of protein-vitamin concentrate technology and formulations of health products based on soybeans approved by the technical specifications. The research results show the possibility of expanding the use of soy-based health foods in the production of health foods, which allows to increase the range of soy products with improved chemical composition.
- Open Access
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 61-69
The feasibility of using soybean raw materials
The most important determinant of public health is a balanced, nutritious diet that ensures normal human growth and development, life expectancy, increases the body's resistance to adverse environmental conditions, and leads to progress and improvement of the quality of life. The article presents the reasonable reasons for the expediency of using soybean raw materials, which led to the emergence of mass consumption products available to all groups of the population, which can be used regularly in everyday, dietary, therapeutic or preventive nutrition with a high degree of digestibility and assimilation of food, in accordance with the recommendations, while maintaining an adequate level of energy intake per day. Given the difficulties our country is experiencing due to martial law, there is a problem of expanding and, in some regions, providing a sufficient range of domestic food products that include energy components: proteins, fats and carbohydrates. There is a decrease in the production of domestic meat raw materials due to the problems faced by farms in today's difficult conditions. The article investigates the chemical composition and energy value of soybeans and soy products. The comparative characterization of soybeans and soybean products is also carried out. The proposal to enrich the range of food products with soybean processing products is also substantiated. With the further prospect of developing technologies for adding and enriching soybean processing products to raw materials of animal origin. The feasibility of these technologies is based on the chemical composition of soybeans. After all, soybeans and soy products are protein components, the value of which is primarily represented by polyunsaturated fatty acids, isoflavonoids, phospholipids, enzymes, carbohydrates, dietary fiber, minerals, as well as vitamins E, B, PP and other physiologically valuable nutrients. It is clear that in order to maximize the extraction of native nutrients, it is important to use special methods and economical modes of technological processing of raw materials. The article also describes the main types of soybean seed processing products with high nutritional and biological value available on the Ukrainian market.
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 61-69
Open AccessThe feasibility of using soybean raw materials
The most important determinant of public health is a balanced, nutritious diet that ensures normal human growth and development, life expectancy, increases the body's resistance to adverse environmental conditions, and leads to progress and improvement of the quality of life. The article presents the reasonable reasons for the expediency of using soybean raw materials, which led to the emergence of mass consumption products available to all groups of the population, which can be used regularly in everyday, dietary, therapeutic or preventive nutrition with a high degree of digestibility and assimilation of food, in accordance with the recommendations, while maintaining an adequate level of energy intake per day. Given the difficulties our country is experiencing due to martial law, there is a problem of expanding and, in some regions, providing a sufficient range of domestic food products that include energy components: proteins, fats and carbohydrates. There is a decrease in the production of domestic meat raw materials due to the problems faced by farms in today's difficult conditions. The article investigates the chemical composition and energy value of soybeans and soy products. The comparative characterization of soybeans and soybean products is also carried out. The proposal to enrich the range of food products with soybean processing products is also substantiated. With the further prospect of developing technologies for adding and enriching soybean processing products to raw materials of animal origin. The feasibility of these technologies is based on the chemical composition of soybeans. After all, soybeans and soy products are protein components, the value of which is primarily represented by polyunsaturated fatty acids, isoflavonoids, phospholipids, enzymes, carbohydrates, dietary fiber, minerals, as well as vitamins E, B, PP and other physiologically valuable nutrients. It is clear that in order to maximize the extraction of native nutrients, it is important to use special methods and economical modes of technological processing of raw materials. The article also describes the main types of soybean seed processing products with high nutritional and biological value available on the Ukrainian market.
- Open Access
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (123)) , 50-59
Substantiating the technology of cream-whipped candy masses with the addition of berry and fruit paste
The object of research is the technology of creamy-whipped sweets with the addition of fruit and berry paste. Its addition solves the problem of improving sugar masses, namely structural characteristics and physiological value (enrichment with non-starch polysaccharides, vitamin C, polyphenols, and organic acids). In addition, a positive effect is achieved by providing the products with original organoleptic properties without the use of synthetic dyes and flavors. The proposed fruit and berry paste is obtained at gentle temperatures, which allows preserving the biological potential of raw materials and is characterized by a strong structure with a dynamic viscosity of 498 Pa·s. It was found that the introduction of fruit and berry paste in the amount of up to 10 % by weight of formulation raw materials improves the foaming ability of protein mass in the process of whipping. Increasing the paste content to 20 % leads to a slight deterioration in this indicator, but its value is at the level of control. The stability of the whipped protein mass increases evenly by increasing the dosage of the additive. The positive effect of fruit and berry paste on the quality indicators of finished creamy-whipped candy masses was noted. Samples with the additive give less shrinkage during the structuring process, its duration is reduced, and strength increases. It is recommended to add fruit and berry paste to creamy-whipped candy masses in the amount of 15 % of the total amount of formulation raw materials and at the same time reduce the formulation dosage of agar by 40 %. Such products acquire an original lilac color, a pleasant yogurt flavor, and the aroma of red currant. The nutrient composition of products is significantly improved – the content of non-starch polysaccharides increases by 2 times; the product is enriched with vitamin C and polyphenolic compounds that are absent in the control sample
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (123)) , 50-59
Open AccessSubstantiating the technology of cream-whipped candy masses with the addition of berry and fruit paste
The object of research is the technology of creamy-whipped sweets with the addition of fruit and berry paste. Its addition solves the problem of improving sugar masses, namely structural characteristics and physiological value (enrichment with non-starch polysaccharides, vitamin C, polyphenols, and organic acids). In addition, a positive effect is achieved by providing the products with original organoleptic properties without the use of synthetic dyes and flavors. The proposed fruit and berry paste is obtained at gentle temperatures, which allows preserving the biological potential of raw materials and is characterized by a strong structure with a dynamic viscosity of 498 Pa·s. It was found that the introduction of fruit and berry paste in the amount of up to 10 % by weight of formulation raw materials improves the foaming ability of protein mass in the process of whipping. Increasing the paste content to 20 % leads to a slight deterioration in this indicator, but its value is at the level of control. The stability of the whipped protein mass increases evenly by increasing the dosage of the additive. The positive effect of fruit and berry paste on the quality indicators of finished creamy-whipped candy masses was noted. Samples with the additive give less shrinkage during the structuring process, its duration is reduced, and strength increases. It is recommended to add fruit and berry paste to creamy-whipped candy masses in the amount of 15 % of the total amount of formulation raw materials and at the same time reduce the formulation dosage of agar by 40 %. Such products acquire an original lilac color, a pleasant yogurt flavor, and the aroma of red currant. The nutrient composition of products is significantly improved – the content of non-starch polysaccharides increases by 2 times; the product is enriched with vitamin C and polyphenolic compounds that are absent in the control sample
- Open Access
- 21 October 2022
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 24 (98) , 35-39
The Mathcad system usage in finding normal equations in the description of food extraction processes
The article describes using electronic computer systems, particularly Mathcad when finding standard equations for building mathematical models of technological processes in the chemical and food industries. Classical mathematical models of the extraction process are usually based on analyzing the differential equation of diffusion under appropriate boundary and initial conditions. Also, when describing mathematical models, Fick's equation, the equation of the adsorption pore model of molecular-statistical studies, models that take into account the physics of the process of substance transfer in a capillary-porous medium, etc., are used. Modeling of mass transfer processes under the influence of the intensifying action of the microwave field is described in the studies for the systems “coffee – water” and “oak wood – water-alcohol solution”, “coffee grounds – alcohol,” “amorant – hexane,” a mechanism of the combined process of mass transfer of extractive substances from a porous structure is proposed into solution The description of mass transfer processes under the influence of microwave field intensification is rather complicated. The mass transfer of extractive substances from porous structures to the solution occurs through the distribution of concentrations at the “solid–solvent” interface. However, it passes from the inner part through the outer part, through the capillaries into the border diffusion layer. Complex mathematical models for mass transfer processes do not have analytical solutions. When using the Mathcad system to solve nonlinear systems of equations, it is recommended to use the built-in find function in the calculated Given block. Also, the universal function genfit is quite adequate, which makes it possible to determine unknown parameters for nonlinear combinations of functions by the method of least squares. This system was used in describing extraction processes in the structure of interaction “oil – containing raw materials – solvent” with the intensifying effect of the microwave field. Such simplified analytical description systems are recommended to be used along with experimental modeling with the classic use of similarity theory and the “dimensional analysis” method. The final result of these directions is the construction of sound engineering methods for the design of extractors for industrial purposes.
- 21 October 2022
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 24 (98) , 35-39
Open AccessThe Mathcad system usage in finding normal equations in the description of food extraction processes
The article describes using electronic computer systems, particularly Mathcad when finding standard equations for building mathematical models of technological processes in the chemical and food industries. Classical mathematical models of the extraction process are usually based on analyzing the differential equation of diffusion under appropriate boundary and initial conditions. Also, when describing mathematical models, Fick's equation, the equation of the adsorption pore model of molecular-statistical studies, models that take into account the physics of the process of substance transfer in a capillary-porous medium, etc., are used. Modeling of mass transfer processes under the influence of the intensifying action of the microwave field is described in the studies for the systems “coffee – water” and “oak wood – water-alcohol solution”, “coffee grounds – alcohol,” “amorant – hexane,” a mechanism of the combined process of mass transfer of extractive substances from a porous structure is proposed into solution The description of mass transfer processes under the influence of microwave field intensification is rather complicated. The mass transfer of extractive substances from porous structures to the solution occurs through the distribution of concentrations at the “solid–solvent” interface. However, it passes from the inner part through the outer part, through the capillaries into the border diffusion layer. Complex mathematical models for mass transfer processes do not have analytical solutions. When using the Mathcad system to solve nonlinear systems of equations, it is recommended to use the built-in find function in the calculated Given block. Also, the universal function genfit is quite adequate, which makes it possible to determine unknown parameters for nonlinear combinations of functions by the method of least squares. This system was used in describing extraction processes in the structure of interaction “oil – containing raw materials – solvent” with the intensifying effect of the microwave field. Such simplified analytical description systems are recommended to be used along with experimental modeling with the classic use of similarity theory and the “dimensional analysis” method. The final result of these directions is the construction of sound engineering methods for the design of extractors for industrial purposes.
- Open Access
- 28 February 2020
- Published by Sergeieva I in SWorld-Ger Conference proceedings
- No. gec25-01,p. 26-31
APPLICATION OF THE PRINCIPLE OF NONRESONANT EFFECT OF THE INFLUENCE OF THE MICROWAVE FIELD IN THE TECHNOLOGY OF JUICE BLENDING
Technologies strive for improvement and this process is almost endless. In the technology of juice blending, not only the most optimal selection of components for blending remains relevant, but also the technological features of heat treatment processes.
- 28 February 2020
- Published by Sergeieva I in SWorld-Ger Conference proceedings
- No. gec25-01,p. 26-31
Open AccessAPPLICATION OF THE PRINCIPLE OF NONRESONANT EFFECT OF THE INFLUENCE OF THE MICROWAVE FIELD IN THE TECHNOLOGY OF JUICE BLENDING
Technologies strive for improvement and this process is almost endless. In the technology of juice blending, not only the most optimal selection of components for blending remains relevant, but also the technological features of heat treatment processes.
- 21 June 2018
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 6 (10) , 243-247
Grounds for promotion of shelf life of the "Mozzarella" cheese by use of a nizin preparation
- 21 June 2018
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 6 (10) , 243-247
Grounds for promotion of shelf life of the "Mozzarella" cheese by use of a nizin preparation