Min Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Min Wang has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
Song Li
Department of Mechanics and Aerospace Engineering Southern University of Science and Technology Shenzhen 518055 P. R. China
7 shared publicationsCong Zhao
School of Microelectronics Southern University of Science and Technology Shenzhen 518055 P. R. China
6 shared publicationsYing Jin
Southern University of Science and Technology
6 shared publicationsYufei Zhai
School of Microelectronics, Southern University of Science and Technology, Shenzhen, PR China
6 shared publicationsShah Fahad
School of Microelectronics Southern University of Science and Technology, Shenzhen, P.R.China
5 shared publicationsYuxuan Dong
School of Microelectronics, Southern University of Science and Technology, Shenzhen, PR China
5 shared publications
Latest Publications
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (5) , 967-973
A Low-Voltage-Driven Dual-Band Tunable Fabry--Pérot Filter
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 35 (5) , 967-973
A Low-Voltage-Driven Dual-Band Tunable Fabry--Pérot Filter
- 18 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
High-Sensitivity Near-Infrared Upconversion Detector Using Hybrid Plasmonic-Photonic Structure
In an array-format optical-readout configuration, near-infrared (NIR) upconversion detectors transform NIR excitation into visible emission that can be recorded by standard cameras, enabling direct imaging without complex readout circuits. However, these optical-readout upconversion detectors typically rely on lanthanide-doped transducers, and their performance is often constrained by the intrinsically weak NIR absorption of 4f-4f transitions and the nonlinear multiphoton excitation dynamics, which together reduce the excitation-to-emission conversion yield and ultimately limit detectivity of the device. Here, we report a camera-readable NIR upconversion detector based on a UCNPs-PDMS microarray integrated with cascaded plasmonic and photonic field-modulation elements. In this configuration, resonance-matched Au nanorods (Au NRs) provide nanoscale near-field amplification, while a pitch-matched polydimethylsiloxane (PDMS) microlens array (MLA) concentrates the excitation light at the detector plane. The cascaded hybrid architecture delivers more than 8-fold enhancement in raw upconversion luminescence. Under fixed camera and image-processing settings, the noise-equivalent irradiance (NEI) falls from 83.98 to 0.674 mW·cm-2 and the effective optical-readout specific detectivity increases from 2.17 × 103 to 2.70 × 105 Jones, yielding a 124.6-fold enhancement in overall device detection performance. A time-lapse drying demonstration further validates stable, quantitative optical-readout monitoring sensing, where the extracted ratio metric follows a Page-model form and yields kinetic descriptors of moisture evolution.
- 18 June 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
High-Sensitivity Near-Infrared Upconversion Detector Using Hybrid Plasmonic-Photonic Structure
In an array-format optical-readout configuration, near-infrared (NIR) upconversion detectors transform NIR excitation into visible emission that can be recorded by standard cameras, enabling direct imaging without complex readout circuits. However, these optical-readout upconversion detectors typically rely on lanthanide-doped transducers, and their performance is often constrained by the intrinsically weak NIR absorption of 4f-4f transitions and the nonlinear multiphoton excitation dynamics, which together reduce the excitation-to-emission conversion yield and ultimately limit detectivity of the device. Here, we report a camera-readable NIR upconversion detector based on a UCNPs-PDMS microarray integrated with cascaded plasmonic and photonic field-modulation elements. In this configuration, resonance-matched Au nanorods (Au NRs) provide nanoscale near-field amplification, while a pitch-matched polydimethylsiloxane (PDMS) microlens array (MLA) concentrates the excitation light at the detector plane. The cascaded hybrid architecture delivers more than 8-fold enhancement in raw upconversion luminescence. Under fixed camera and image-processing settings, the noise-equivalent irradiance (NEI) falls from 83.98 to 0.674 mW·cm-2 and the effective optical-readout specific detectivity increases from 2.17 × 103 to 2.70 × 105 Jones, yielding a 124.6-fold enhancement in overall device detection performance. A time-lapse drying demonstration further validates stable, quantitative optical-readout monitoring sensing, where the extracted ratio metric follows a Page-model form and yields kinetic descriptors of moisture evolution.
- Open Access
- 22 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Angle-based fluorescence thermometry with high sensitivity and high resolution
Fluorescence-based thermometry offers non-contact, high-resolution temperature sensing, yet current methods face challenges in simultaneously achieving high sensitivity, stability and insensitivity to non-thermal perturbations. Here, a sensing paradigm is introduced that translates temperature variations into detectable shifts in the fluorescence emission angle via grating-modulated fluorescence emission. In a prototype device featuring a gold grating coupled with [Ru(phen)₃]Cl₂ fluorophores, an absolute sensitivity of 0.58 °/°C and a relative sensitivity of 81.34 %/°C at 79.36 °C are achieved, with a temperature resolution down to 0.01 °C. Unlike intensity-based methods, this angle-resolved strategy effectively isolates the thermal signal from excitation power fluctuations and environmental interferences and demonstrates robustness across broad humidity ranges (10–89% RH). Sustained operational stability is validated over 12-hour battery cycling, while real-time monitoring of a smartphone CPU enables early-warning capabilities against overheating. This promising and customizable approach establishes a pathway for thermal management in advanced engineering systems.
- 22 May 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessAngle-based fluorescence thermometry with high sensitivity and high resolution
Fluorescence-based thermometry offers non-contact, high-resolution temperature sensing, yet current methods face challenges in simultaneously achieving high sensitivity, stability and insensitivity to non-thermal perturbations. Here, a sensing paradigm is introduced that translates temperature variations into detectable shifts in the fluorescence emission angle via grating-modulated fluorescence emission. In a prototype device featuring a gold grating coupled with [Ru(phen)₃]Cl₂ fluorophores, an absolute sensitivity of 0.58 °/°C and a relative sensitivity of 81.34 %/°C at 79.36 °C are achieved, with a temperature resolution down to 0.01 °C. Unlike intensity-based methods, this angle-resolved strategy effectively isolates the thermal signal from excitation power fluctuations and environmental interferences and demonstrates robustness across broad humidity ranges (10–89% RH). Sustained operational stability is validated over 12-hour battery cycling, while real-time monitoring of a smartphone CPU enables early-warning capabilities against overheating. This promising and customizable approach establishes a pathway for thermal management in advanced engineering systems.
- 30 March 2026
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (15)
Hierarchical Plasmonic Funneling Enables High Signal‐to‐Noise Ratio Confocal Fluorescence Imaging
Confocal fluorescence microscopy is fundamentally constrained by the trade‐off between signal quality and phototoxicity, as achieving high resolution typically necessitates intense excitation or high fluorophore concentrations. This work introduces a hierarchical plasmonic energy‐funneling architecture to overcome this limitation. The strategy is implemented via a partially‐etched curved gold grating (PECG) substrate, functioning as a macroscopic coupler to focus surface plasmon polaritons (SPPs). These SPPs subsequently drive superimposed nanocones acting as plasmonic nano‐antennas to excite localized surface plasmons (LSPs), facilitating cascade field confinement via synergistic SPP‐LSP coupling. This two‐stage mechanism produces an 821‐fold fluorescence enhancement, yielding a signal‐to‐noise ratio (SNR) improvement of 42 dB at ultra‐low 1 n m dye concentrations. Such high SNR preserves a stable photon budget during live‐cell imaging, enabling continuous observation of fine cytoskeletal dynamics for over 60 min under a significantly reduced laser intensity of 0.2 mW. Furthermore, by applying sparse deconvolution and AI‐based denoising to this high‐fidelity data, a lateral resolution of 120 nm is achieved. This work establishes a rational design strategy for plasmonics, demonstrating an effective solution to the core challenge of low SNR in fluorescence microscopy and paving the way for non‐destructive interrogation of sensitive cellular processes.
- 30 March 2026
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (15)
Hierarchical Plasmonic Funneling Enables High Signal‐to‐Noise Ratio Confocal Fluorescence Imaging
Confocal fluorescence microscopy is fundamentally constrained by the trade‐off between signal quality and phototoxicity, as achieving high resolution typically necessitates intense excitation or high fluorophore concentrations. This work introduces a hierarchical plasmonic energy‐funneling architecture to overcome this limitation. The strategy is implemented via a partially‐etched curved gold grating (PECG) substrate, functioning as a macroscopic coupler to focus surface plasmon polaritons (SPPs). These SPPs subsequently drive superimposed nanocones acting as plasmonic nano‐antennas to excite localized surface plasmons (LSPs), facilitating cascade field confinement via synergistic SPP‐LSP coupling. This two‐stage mechanism produces an 821‐fold fluorescence enhancement, yielding a signal‐to‐noise ratio (SNR) improvement of 42 dB at ultra‐low 1 n m dye concentrations. Such high SNR preserves a stable photon budget during live‐cell imaging, enabling continuous observation of fine cytoskeletal dynamics for over 60 min under a significantly reduced laser intensity of 0.2 mW. Furthermore, by applying sparse deconvolution and AI‐based denoising to this high‐fidelity data, a lateral resolution of 120 nm is achieved. This work establishes a rational design strategy for plasmonics, demonstrating an effective solution to the core challenge of low SNR in fluorescence microscopy and paving the way for non‐destructive interrogation of sensitive cellular processes.
- 13 December 2025
- Published by Elsevier in Measurement
- Vol. 262
The Permittivity Measurement of Ultrathin Nonmagnetic Film by Fabry-Pérot Cavity
- 13 December 2025
- Published by Elsevier in Measurement
- Vol. 262
The Permittivity Measurement of Ultrathin Nonmagnetic Film by Fabry-Pérot Cavity
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (11) , 6109-6113
Infrared Thermal Detector With Ag–Graphene Composite Absorber
Infrared (IR) thermal detectors depend on the measurable property variations of the thermosensitive materials due to the temperature rise caused by the absorption of IR radiation. Due to the unique wavelength conversion feature, the fluorescent thermal detector has become a promising candidate in optical readout IR detectors. However, the IR absorption and utilization still restrict its wide application. Here, we report the Ag–graphene composite, which is utilized to enhance the absorption in the mid-infrared (MIR) band for a fluorescent thermal detector. The plasmonic resonance of the Ag NPs creates an enhanced localized electric field that allows graphene to absorb more IR radiation and convert it into thermal to heat the phosphor, resulting in a higher temperature rise. The detector utilizing the Ag–graphene composite demonstrates a high mid-IR absorption of up to 65.57% at 9μm, and the thermal responsivity (relative variation in gray value of luminous output) is enhanced by a factor of 2.2 at a 313-K target. Our work expands the use of graphene for IR absorption and detection beyond the ultralong wavelength limit and suggests that even shorter wavelength may be reached using other plasmonic structures.
- 6 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (11) , 6109-6113
Infrared Thermal Detector With Ag–Graphene Composite Absorber
Infrared (IR) thermal detectors depend on the measurable property variations of the thermosensitive materials due to the temperature rise caused by the absorption of IR radiation. Due to the unique wavelength conversion feature, the fluorescent thermal detector has become a promising candidate in optical readout IR detectors. However, the IR absorption and utilization still restrict its wide application. Here, we report the Ag–graphene composite, which is utilized to enhance the absorption in the mid-infrared (MIR) band for a fluorescent thermal detector. The plasmonic resonance of the Ag NPs creates an enhanced localized electric field that allows graphene to absorb more IR radiation and convert it into thermal to heat the phosphor, resulting in a higher temperature rise. The detector utilizing the Ag–graphene composite demonstrates a high mid-IR absorption of up to 65.57% at 9μm, and the thermal responsivity (relative variation in gray value of luminous output) is enhanced by a factor of 2.2 at a 313-K target. Our work expands the use of graphene for IR absorption and detection beyond the ultralong wavelength limit and suggests that even shorter wavelength may be reached using other plasmonic structures.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Infrared Thermal Sensor Using Electrosprayed Silver Nanowires and Ruthenium Complex
Thermometric sensors are widely used in industrial and medical applications. Temperature-dependent phosphors are progressively chosen materials in thermal sensors yet posing major constraints due to relatively low fluorescence emission. Plasmonic enhancements are sparking alternatives in strengthening light-matter interaction and energetically revamping the functionalities of phosphors with real potencies. Herein, we proposed an infrared (IR) thermal sensor using a highly temperaturesensitive phosphor. For the first time, silver nanowires (AgNWs) were employed to embed in ruthenium complex temperature sensitive paint (TSP) with a matrix of poly(vinylidene fluoride) (PVDF), to build plasmonic enhanced fluorescent thermal sensor. Upon optimizing the concentration of AgNWs incorporation, the electrosprayed AgNWs@Ru-PVDF film demonstrated an increase of an order of magnitude in fluorescence intensity. Besides, the thermal sensor integrated with such film delivered a temperature sensitivity of 4.01% K-1 at room temperature and a detectivity D* of 7.82 × 107 cm·Hz1/2/W. Compared with control group without AgNWs addition, an 18% enhancement in temperature sensitivity, 29% enhancement in D*, a 30% reduction in response time, and a 142% increase in fluorescence intensity were successfully obtained, which suggests its promising in thermal imaging application.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. PP (1530437X) , 1
Infrared Thermal Sensor Using Electrosprayed Silver Nanowires and Ruthenium Complex
Thermometric sensors are widely used in industrial and medical applications. Temperature-dependent phosphors are progressively chosen materials in thermal sensors yet posing major constraints due to relatively low fluorescence emission. Plasmonic enhancements are sparking alternatives in strengthening light-matter interaction and energetically revamping the functionalities of phosphors with real potencies. Herein, we proposed an infrared (IR) thermal sensor using a highly temperaturesensitive phosphor. For the first time, silver nanowires (AgNWs) were employed to embed in ruthenium complex temperature sensitive paint (TSP) with a matrix of poly(vinylidene fluoride) (PVDF), to build plasmonic enhanced fluorescent thermal sensor. Upon optimizing the concentration of AgNWs incorporation, the electrosprayed AgNWs@Ru-PVDF film demonstrated an increase of an order of magnitude in fluorescence intensity. Besides, the thermal sensor integrated with such film delivered a temperature sensitivity of 4.01% K-1 at room temperature and a detectivity D* of 7.82 × 107 cm·Hz1/2/W. Compared with control group without AgNWs addition, an 18% enhancement in temperature sensitivity, 29% enhancement in D*, a 30% reduction in response time, and a 142% increase in fluorescence intensity were successfully obtained, which suggests its promising in thermal imaging application.
- Open Access
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-8
Athermal Tantalum Pentoxide Mach-Zehnder Interferometers Based on Structural Compensation Method
We demonstrate Mach-Zehnder interferometer-based (MZI) athermal photonic devices using the structural compensation method. Unlike previous structural compensation studies that were applied on the thermal sensitive materials such as silicon, this work is implemented in tantalum pentoxide (Ta2O5) platform whose thermo-optic coefficient is low. This allows us to achieve ultra-athermalized filters by combining the structural compensation method and the material's own thermo-optic properties. Two types of devices are proposed: the asymmetric Mach-Zehnder interferometer (AMZI) and the ring-coupled Mach-Zehnder interferometer (RMZI). The temperature-dependent wavelength shift (TDWS) of the AMZI device is only 1.98 pm/K around 1550 nm which is 4.6 times smaller than a regular MZI. The TDWS remains below 2.23 pm/K across a broad bandwidth from 1480 nm to 1580 nm. By breaking the linear dependence between the wavelength shift and the temperature change, the maximum resonance drift can be restricted by using a ring-coupled MZI. Owning to Fano effect, the transmission spectrum of the RMZI device exhibits an oscillating behavior when facing temperature changes. This work proves the effectiveness of structural compensation method on an already low thermo-optic photonic platform, paving the way towards realization of ultra-athermal integrated optical filters in a low-loss and CMOS-compatible platform.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 17 (1) , 1-8
Open AccessAthermal Tantalum Pentoxide Mach-Zehnder Interferometers Based on Structural Compensation Method
We demonstrate Mach-Zehnder interferometer-based (MZI) athermal photonic devices using the structural compensation method. Unlike previous structural compensation studies that were applied on the thermal sensitive materials such as silicon, this work is implemented in tantalum pentoxide (Ta2O5) platform whose thermo-optic coefficient is low. This allows us to achieve ultra-athermalized filters by combining the structural compensation method and the material's own thermo-optic properties. Two types of devices are proposed: the asymmetric Mach-Zehnder interferometer (AMZI) and the ring-coupled Mach-Zehnder interferometer (RMZI). The temperature-dependent wavelength shift (TDWS) of the AMZI device is only 1.98 pm/K around 1550 nm which is 4.6 times smaller than a regular MZI. The TDWS remains below 2.23 pm/K across a broad bandwidth from 1480 nm to 1580 nm. By breaking the linear dependence between the wavelength shift and the temperature change, the maximum resonance drift can be restricted by using a ring-coupled MZI. Owning to Fano effect, the transmission spectrum of the RMZI device exhibits an oscillating behavior when facing temperature changes. This work proves the effectiveness of structural compensation method on an already low thermo-optic photonic platform, paving the way towards realization of ultra-athermal integrated optical filters in a low-loss and CMOS-compatible platform.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (3) , 4290-4297
Accordion-Inspired Flexible Pressure Sensor Based on Folded Interdigital Electrode
Flexible piezoresistive pressure sensors have attracted great attention for its wide application in human-machine interface, wearable electronics and so on. However, it is often difficult to obtain sensors with both high sensitivity and wide sensing range. Here, we propose an accordion-inspired piezoresistive pressure sensor as a new solution. The flexible interdigital electrode is bent by mold pressing, and then stacked along the compression direction with paper-based conductive sensing layers by appropriate assembly and encapsulation. The stacked structure obviously increases the change and upper limit of contact area between sensing layers and electrodes, which effectively improves the sensitivity of the pressure sensor over the whole sensing range compared to single-layered structure. Thus, the sensor in this work shows high sensitivities (more than 300 kPa−1) in a wide sensing range (3.6-714.3 kPa), with a maximum value of 1431.7 kPa−1. This work provides a new strategy to design and fabricate piezoresistive pressure sensors with high sensitivity and wide sensing range.
- 16 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (3) , 4290-4297
Accordion-Inspired Flexible Pressure Sensor Based on Folded Interdigital Electrode
Flexible piezoresistive pressure sensors have attracted great attention for its wide application in human-machine interface, wearable electronics and so on. However, it is often difficult to obtain sensors with both high sensitivity and wide sensing range. Here, we propose an accordion-inspired piezoresistive pressure sensor as a new solution. The flexible interdigital electrode is bent by mold pressing, and then stacked along the compression direction with paper-based conductive sensing layers by appropriate assembly and encapsulation. The stacked structure obviously increases the change and upper limit of contact area between sensing layers and electrodes, which effectively improves the sensitivity of the pressure sensor over the whole sensing range compared to single-layered structure. Thus, the sensor in this work shows high sensitivities (more than 300 kPa−1) in a wide sensing range (3.6-714.3 kPa), with a maximum value of 1431.7 kPa−1. This work provides a new strategy to design and fabricate piezoresistive pressure sensors with high sensitivity and wide sensing range.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 34 (1) , 92-99
Suspended Insulation Structure Design for Infrared Thermal Detector
Infrared thermal detectors generate signal output utilizing thermal effect, with detection performance being dictated by the structure design of the detector. To ensure effective thermal insulation, detectors are typically designed with slender supporting beams to reduce thermal conductivity and enhance signal output. In this paper, a fluorescent infrared detector with different isolation beam designs is proposed to investigate the trade-off relationship among detector performance parameters. Two kinds of isolation beams are theoretically derived to minimize the thermal conductivity for specific detection unit, and the thermal detectors with suspending units are manufactured by MEMS technology. The thermal imaging results for a 623 K heat source indicate that the temperature rise for the two-beam structure (i.e. 46.7 K) exceeds that of the four-beam structure (i.e. 38.3 K). Additionally, the detectivity of 4.05 $\times$ 10 $^{\mathbf{7}}$ cm $\cdot$ Hz $^{\mathbf{1/2}}$ /W is obtained by the two-beam structure, which is lower than that of the four-beam structure (i.e. 5.80 $\times$ 10 $^{\mathbf{7}}$ cm $\cdot$ Hz $^{\mathbf{1/2}}$ /W). The temporal resolution and NETD are also calculated and compared. The findings demonstrate that in designing thermal detectors, deliberately sacrificing a portion of the detectivity within an acceptable range and reducing beam thermal conductivity can significantly enhance temperature rise and increase signal output. 2024-0131
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 34 (1) , 92-99
Suspended Insulation Structure Design for Infrared Thermal Detector
Infrared thermal detectors generate signal output utilizing thermal effect, with detection performance being dictated by the structure design of the detector. To ensure effective thermal insulation, detectors are typically designed with slender supporting beams to reduce thermal conductivity and enhance signal output. In this paper, a fluorescent infrared detector with different isolation beam designs is proposed to investigate the trade-off relationship among detector performance parameters. Two kinds of isolation beams are theoretically derived to minimize the thermal conductivity for specific detection unit, and the thermal detectors with suspending units are manufactured by MEMS technology. The thermal imaging results for a 623 K heat source indicate that the temperature rise for the two-beam structure (i.e. 46.7 K) exceeds that of the four-beam structure (i.e. 38.3 K). Additionally, the detectivity of 4.05 $\times$ 10 $^{\mathbf{7}}$ cm $\cdot$ Hz $^{\mathbf{1/2}}$ /W is obtained by the two-beam structure, which is lower than that of the four-beam structure (i.e. 5.80 $\times$ 10 $^{\mathbf{7}}$ cm $\cdot$ Hz $^{\mathbf{1/2}}$ /W). The temporal resolution and NETD are also calculated and compared. The findings demonstrate that in designing thermal detectors, deliberately sacrificing a portion of the detectivity within an acceptable range and reducing beam thermal conductivity can significantly enhance temperature rise and increase signal output. 2024-0131