Dhurjati Prasad Chakrabarti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dhurjati Prasad Chakrabarti has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
G. Das
Department of Chemical Engineering , Indian Institute of Technology , Kharagpur , India
8 shared publications- Laura Edwards
The University of the West Indies, Department of Chemical Engineering, St. Augustine, Trinidad and Tobago
4 shared publications Darryan Dhanpat
3 shared publications- Gargi Das
Department of Chemical Engineering, IIT Kharagpur 1 , Kharagpur, West Bengal 721302
2 shared publications - Kamal Krishna Mandal
Department of Power Engineering, Jadavpur University, Kolkata, India
2 shared publications - Keeran Ward
School of Chemical and Process Engineering (SCAPE), University of Leeds, Leeds, LS2 9JT, UK
2 shared publications
Latest Publications
- Open Access
- 2 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Fluid Dynamics and Cavitation Revisited
A Fluid Dynamics methodology for predicting three-dimensional flows with extensive cavitation is revisited. The model is based on the multiphase flow equations, with mass transfer due to cavitation appearing as source and sink terms in the liquid and vapour continuity equations. The mass transfer rate is derived from a simplified Rayleigh-Plesset model, which remains the foundation of contemporary cavitation modeling approaches. The methodology is implemented within a control volume finite element framework featuring implicit coupling of continuity and momentum equations. The model is validated on a range of applications including flow over a hydrofoil, an inducer, and transient cavitation in a venturi. Recent advancements in turbulence modeling for cavitating flows, including compressibility-enhanced formulations and scaleresolving simulations, are discussed within the context of modern computational capabilities. Key words: Caviation, Rayleigh-Plesset, Hydrofoil, Inducer, Venturi-cavitation
- 2 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFluid Dynamics and Cavitation Revisited
A Fluid Dynamics methodology for predicting three-dimensional flows with extensive cavitation is revisited. The model is based on the multiphase flow equations, with mass transfer due to cavitation appearing as source and sink terms in the liquid and vapour continuity equations. The mass transfer rate is derived from a simplified Rayleigh-Plesset model, which remains the foundation of contemporary cavitation modeling approaches. The methodology is implemented within a control volume finite element framework featuring implicit coupling of continuity and momentum equations. The model is validated on a range of applications including flow over a hydrofoil, an inducer, and transient cavitation in a venturi. Recent advancements in turbulence modeling for cavitating flows, including compressibility-enhanced formulations and scaleresolving simulations, are discussed within the context of modern computational capabilities. Key words: Caviation, Rayleigh-Plesset, Hydrofoil, Inducer, Venturi-cavitation
- 7 June 2025
- Published by Springer Nature in Acta Geophysica
- Vol. 73 (5) , 4277-4288
Permeability anisotropy of Erin formation friable rocks under high effective pressures
- 7 June 2025
- Published by Springer Nature in Acta Geophysica
- Vol. 73 (5) , 4277-4288
Permeability anisotropy of Erin formation friable rocks under high effective pressures
- Open Access
- 27 June 2024
- Published by Qeios Ltd
Review of: "On the Vapour Pressure Over Three-Component Solutions"
The proposed work appears to include the extension of binary solutions' thermodynamic connections to ternary (three-component) solutions. The partial vapor pressures of each component above the solution in a binary solution—one that has two component...
- 27 June 2024
- Published by Qeios Ltd
Open AccessReview of: "On the Vapour Pressure Over Three-Component Solutions"
The proposed work appears to include the extension of binary solutions' thermodynamic connections to ternary (three-component) solutions. The partial vapor pressures of each component above the solution in a binary solution—one that has two component...
- Open Access
- 15 February 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 192, 194-207
Optimizing the sustainable energy transition: A case study on Trinidad and Tobago
- 15 February 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 192, 194-207
Open AccessOptimizing the sustainable energy transition: A case study on Trinidad and Tobago
- 4 June 2020
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 22 (13) , 4279-4294
Towards greater sustainable development within current Mega-Methanol (MM) production
Supplementing the increasing global methanol demand has forced traditional methanol processing to evolve towards mega-methanol production (MM). With strong legislative change supporting greater adherence to environmental quality, global producers will need to consider a more sustainable process design. Therefore, the need exists to identify viable pathways for the transition of the global methanol industry towards greater sustainability, utilizing existing infrastructure. Here we present a critical assessment of viable MM routes using steam reforming (SMR), combined reforming (CMR) and auto-thermal reforming (ATR), through techno-economics with insight into environmental and global impacts. Our results highlight ATR and CMR as more energy efficient designs, promoting greater environmental benefits. Economically, ATR cases benefit from smaller reforming capacities, providing a cheaper alternative over CMR and SMR designs. Utilization of a Planetary Boundary Framework (PB-LCIA) showed MM technologies transgress PBs affiliated with climate change and ocean acidification. Furthermore, these impacts worsen with increased methanol production, illustrating energy efficiency as a key performance indicator (KPI) that should strongly be considered during process optimization. Additionally, results emphasize industrial symbiosis as a solution to lowering environmental burden. Ultimately, decarbonization coupled with CO2 utilization provides a viable pathway to the absolute sustainability of the MM process across all sustainability domains- with ATR emerging as the best performing technology. Thus, these results highlight critical energy considerations and environmental benefits, underpinning the global MM industry decision on potential sustainable development strategies.
- 4 June 2020
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 22 (13) , 4279-4294
Towards greater sustainable development within current Mega-Methanol (MM) production
Supplementing the increasing global methanol demand has forced traditional methanol processing to evolve towards mega-methanol production (MM). With strong legislative change supporting greater adherence to environmental quality, global producers will need to consider a more sustainable process design. Therefore, the need exists to identify viable pathways for the transition of the global methanol industry towards greater sustainability, utilizing existing infrastructure. Here we present a critical assessment of viable MM routes using steam reforming (SMR), combined reforming (CMR) and auto-thermal reforming (ATR), through techno-economics with insight into environmental and global impacts. Our results highlight ATR and CMR as more energy efficient designs, promoting greater environmental benefits. Economically, ATR cases benefit from smaller reforming capacities, providing a cheaper alternative over CMR and SMR designs. Utilization of a Planetary Boundary Framework (PB-LCIA) showed MM technologies transgress PBs affiliated with climate change and ocean acidification. Furthermore, these impacts worsen with increased methanol production, illustrating energy efficiency as a key performance indicator (KPI) that should strongly be considered during process optimization. Additionally, results emphasize industrial symbiosis as a solution to lowering environmental burden. Ultimately, decarbonization coupled with CO2 utilization provides a viable pathway to the absolute sustainability of the MM process across all sustainability domains- with ATR emerging as the best performing technology. Thus, these results highlight critical energy considerations and environmental benefits, underpinning the global MM industry decision on potential sustainable development strategies.
- 1 January 2020
- Published by Faculty of Engineering, The University of The West Indies
DISSOLVED OXYGEN IN GASOLINE AND TANK CORROSION
International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
- 1 January 2020
- Published by Faculty of Engineering, The University of The West Indies
DISSOLVED OXYGEN IN GASOLINE AND TANK CORROSION
International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
- 1 January 2020
- Published by Faculty of Engineering, The University of The West Indies
PHASE INVERSION AND VISCOSITY IN PIPE FLOW
International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
- 1 January 2020
- Published by Faculty of Engineering, The University of The West Indies
PHASE INVERSION AND VISCOSITY IN PIPE FLOW
International Conference on Emerging Trends in Engineering and Technology (IConETech-2020)
- Open Access
- 1 January 2020
- Published by Taylor & Francis in Cogent Engineering
- Vol. 7 (1)
Phase inversion in liquid phase for air-liquid horizontal flow
This project is primarily aimed at determining the effect of phase inversion on oil-water dispersion from a three-phase mixture comprising of an oil-water emulsion at different oil percentages and air at varying liquid and gas flowrates through a horizontal pipe. Parameters affected by phase inversion were investigated such as liquid-side pressure drop, viscosity and flow regimes. The liquid-side pressure drop was estimated and predicted from existing as well as developed correlations. The results obtained were tabulated and represented graphically. Viscosity measurements were taken at different oil percentages. At inversion, the mixture’s continuous phase switched from water to oil as indicated by the increase in viscosity and pressure drop. A significant change in pressure drop was noted for all correlations used beyond the point of phase inversion. The viscosity of the liquid phase was tried to be related with oil percentage empirically to get a Reynolds’s no of laminar or turbulence. However, that did not influence the prediction significantly. It was also found that tghe occurrence of phase inversion affected the flow regimes of the mixture causing a shift from a plug dominant flow to a more slug-type flow pattern.
- 1 January 2020
- Published by Taylor & Francis in Cogent Engineering
- Vol. 7 (1)
Open AccessPhase inversion in liquid phase for air-liquid horizontal flow
This project is primarily aimed at determining the effect of phase inversion on oil-water dispersion from a three-phase mixture comprising of an oil-water emulsion at different oil percentages and air at varying liquid and gas flowrates through a horizontal pipe. Parameters affected by phase inversion were investigated such as liquid-side pressure drop, viscosity and flow regimes. The liquid-side pressure drop was estimated and predicted from existing as well as developed correlations. The results obtained were tabulated and represented graphically. Viscosity measurements were taken at different oil percentages. At inversion, the mixture’s continuous phase switched from water to oil as indicated by the increase in viscosity and pressure drop. A significant change in pressure drop was noted for all correlations used beyond the point of phase inversion. The viscosity of the liquid phase was tried to be related with oil percentage empirically to get a Reynolds’s no of laminar or turbulence. However, that did not influence the prediction significantly. It was also found that tghe occurrence of phase inversion affected the flow regimes of the mixture causing a shift from a plug dominant flow to a more slug-type flow pattern.
- 27 May 2019
- Published by African Journals Online (AJOL) in Nigerian Journal of Technological Research
- Vol. 14 (1) , 8
Movement of Taylor bubble in various fluids through vertical and inclined tube
- 27 May 2019
- Published by African Journals Online (AJOL) in Nigerian Journal of Technological Research
- Vol. 14 (1) , 8
Movement of Taylor bubble in various fluids through vertical and inclined tube