WAWilton Agila

Wilton Agila

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wilton Agila has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Hybrid Parametric and Non-Parametric Identification of PEMFC Dynamics in SISO and MIMO Workflow

    by Eduardo Benavides-Farías, Abel Rubio-Roldán, Wilton Agila, Edwin Valarezo-Añazco

    Reliable control-oriented models of PEM fuel cells remain challenging because PEMFC dynamics are nonlinear, coupled, and hard to excite under practical constraints. This paper presents a hybrid identification workflow in a controlled MATLAB/Simulink simulation environment. After discretization, bounded multisine excitation is applied, and correlation-based response analysis (CRA) is used to obtain non-parametric dynamics; low-order parametric structures (ARX, ARMAX, Box–Jenkins, OE, and FIR) and a grey-box state-space model are then estimated and validated using Fit%, information criteria (AIC/BIC), and residual diagnostics. In SISO, ARMAX provides the best accuracy–parsimony compromise (Fit = 96.84% with the lowest AIC/BIC and residuals mostly within confidence bounds), while Box–Jenkins achieves the highest fit (i.e., 98.75%) at higher complexity. In MIMO, most channels achieve an accuracy over 92% fit, with the most coupled pathway remaining the limiting case (best fit = 86.38% with BJ), and ARMAX/BJ emerging as the dominant structures across channels. The grey-box model attains 97.35% fit for voltage and 86.47% for power. This paper establishes a unified, control-oriented hybrid workflow that links CRA non-parametric estimation with low-order parametric and grey-box models, providing compact, physically interpretable PEMFC dynamics and practical model-selection guidance for control and energy-management applications.

  • Implementation of Proton Exchange Membrane Fuel Cells in Agricultural Areas: Technical and Economic Benefits

    by Eduardo Benavides-Farias, Abel Rubio-Roldán, Wilton Agila, Luis Muñoz-Zurita

    This article analyzes the technical and economic feasibility of implementing Proton Exchange Membrane Fuel Cells (PEMFCs) in agricultural and rural areas of the coastal region of Ecuador. Challenges in terms of costs, hydrogen storage, and infrastructure are explored. An economic analysis includes highlighting cost components and potential sources of revenue. The findings indicate that while PEMFC technology advancements are urgently needed to overcome existing barriers and maximize return on investment (ROI), immediate action is required to ensure the timely implementation of these advancements.


  • A Numerical Model for the Transport of Reactants in Proton Exchange Fuel Cells

    by Abel Rubio, Wilton Agila, Leandro González, Jonathan Aviles

    Energy has allowed the development of our society and currently, the hydrogen-powered fuel cell is the most promising energy source of the future since it would help to eliminate serious problems such as climate change and economic inequality. The fuel cell converts the chemical energy of the reactants used into electrical energy and produces water and heat as by-products during its operation. The proton exchange membrane fuel cell is expected to play a key role in the future energy system due to its favourable characteristics and its application in mobile phones, electric vehicles, distributed power systems, submarines and aerospace applications. To optimize the operation of the fuel cell, models have been developed that represent it as a structural, dimensional, thermal and state system, which requires -as a contribution to technological development-, a strategic and systemic vision. The document analyzes the technique of numerical methods, to ensure optimal operation of the Proton exchange membrane fuel cell, addressing non-linearities of electrical behaviour and the imprecision of the physical world.


  • Qualitative Model for an Oxygen Therapy System based on Renewable Energy

    by Wilton Agila, Gomer Rubio, Raul M. del Toro Matamoros, Livington Miranda

    In Ecuador, the existence of chronic obstructive pulmonary diseases and the appearance of new viruses such as Covid-19 that cause respiratory problems, influence the development of oxygen therapy services. These services improve the health of some patients and increase life expectancy in others. However, the limited care capacities in the hospital centers of Ecuador and the lack of development of self-sufficient technological equipment for the provision of therapeutic oxygen services, mean that said service is carried out mainly in large cities, leaving aside other geographical areas with populations that also require it. This article explores the implementation of an oxygen therapy system based on the use of alternative energies, to be used in the treatment of people who cannot do without supplemental oxygenation in communes and homes. In addition, a control system based on linguistic rules for oxygen supply is proposed. Finally, the closed loop response of the control system is analyzed.


  • Approximate Reasoning Techniques in the Control of States of Operation of the PEM Fuel Cell

    by Wilton Agila, Gomer Rubio, Jonathan Aviles-Cedeno, Leandro González

    Among the different types of fuel cells, the proton-exchange membrane fuel cell (PEMFC) has attracted much interest as a power source for residential applications and electric vehicles. However, the development of new applications and the validation of new components of PEMFC require the characterization of their electrical response under certain conditions, both of operation (state variables) and power to be supplied (variation of electrical load), as well as the humidity degree of the membrane (operating state of the PEMFC considered Normal). Under this context, in this study, a set of specific processes based on approximate reasoning techniques have been designed and implemented for the dynamic control of the humidification of the polymeric membrane.


  • A Novel System-Level Model for a Fuel Cell in a Strategic Context

    by A. Rubio, W. Agila

    This document proposes a novel system-level model that facilitates the comprehension of individual processes intervening in the operation of a full cell, particularly the PEMFC, considering its importance as an efficient and environmentally friendly source of energy. The model classifies each of the processes from a strategic, productive and support perspective, contributing to the organization and analyses of the information and giving guidelines on how to keep them under control, according to their state variables. Finally, the results show -as an added value-, their modeling by numerical methods using free software Octavie, allowing to determine the charge density and, therefore, the voltage that the fuel cell supplies.


  • Qualitative Model of Control in the Pressure Stabilization of PEM Fuel Cell

    by W. Agila, Gomer Rubio, L. Miranda, L. Vazquez

    This work describes an approximate reasoning technique to deal with the non-linearity that occurs in the stabilization of the pressure of anodic and cathodic gases of a proton exchange membrane fuel cell (PEM). The implementation of a supervisory element in the stabilization of the pressure of the PEM cell is described. The fuzzy supervisor is a reference control, it varies the value of the reference given to the classic low-level controller, Proportional - Integral - Derivative (PID), according to the speed of change of the measured pressure and the change in the error of the pressure. The objective of the fuzzy supervisor is to achieve a rapid response over time of the variable pressure, avoiding unwanted overruns with respect to the reference value. A comparative analysis is detailed with the classic PID control to evaluate the operation of the “fuzzy supervisor with different flow values and different sizes of active area of the PEM cell (electric power generated).


  • Open Access

    Modeling and comparative study of linear and nonlinear controllers for rotary inverted pendulum

    by Byron Lima, Ricardo Cajo, Víctor Huilcapi, Wilton Agila

    The rotary inverted pendulum (RIP) is a problem difficult to control, several studies have been conducted where different control techniques have been applied. Literature reports that, although problem is nonlinear, classical PID controllers presents appropriate performances when applied to the system. In this paper, a comparative study of the performances of linear and nonlinear PID structures is carried out. The control algorithms are evaluated in the RIP system, using indices of performance and power consumption, which allow the categorization of control strategies according to their performance. This article also presents the modeling system, which has been estimated some of the parameters involved in the RIP system, using computer-aided design tools (CAD) and experimental methods or techniques proposed by several authors attended. The results indicate a better performance of the nonlinear controller with an increase in the robustness and faster response than the linear controller.


  • Experts agents in PEM fuel cell control

    by Wilton Agila, Ricardo Cajo, Douglas Plaza

    In the control of the PEM (Proton Exchange Membrane) fuel cell, the existence of both deliberative and reactive processes that facilitate the tasks of control resulting from a wide range of operating scenarios and range of conditions it is required. The latter is essential to adjust its parameters to the multiplicity of circumstances that may occur in the operation of the PEM stack. In this context, the design and development of an expert-agents based architecture for autonomous control of the PEM stack in top working conditions is presented. The architecture integrates perception and control algorithms using sensory and context information. It is structured in a hierarchy of levels with different time window and level of abstraction. The monitoring model and autonomic control of PEM stack has been validated with different types of PEM stacks and operating conditions demonstrating high reliability in achieving the objective of the proposed energy efficiency. Dynamic control of the wetting of the membrane is a clear example.


  • Evaluation of Algorithms for Linear and Nonlinear PID Control for Twin Rotor MIMO System

    by Ricardo Cajo, Wilton Agila

    This paper analizes a linear and a nonlinear PID control algorithms for a twin rotor MIMO system (TRMS), which is characterized by its nonlinearity, two degrees of freedom and cross coupling. This work aims to stabilize a TRMS in order to achieve a particular position and to follow a trajectory in the shortest time. Mathematical modelling of helicopter system is simulated using MATLAB/Simulink, the two degrees of freedom are controlled both horizontally and vertically through the proposed controllers. Here is also proposed a novel set of nonlinear-segmented observers for each degree of freedom in order to measure the states required by the nonlinear controller. Followed by a comparative performance analysis of both algorithms in a real TRMS.