Gomer Rubio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gomer Rubio has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Wilton Agila
Faculty of Engineering in Electricity and Computation, CASE, CIDIS Escuela Superior Politcnica del Litoral, ESPOL,Guayaquil,Ecuador
4 shared publications - Jonathan Aviles-Cedeno
Faculty of Engineering in Electricity and Computation, FIEC Escuela Superior Politecnica del Litoral, ESPOL,Guayaquil,Ecuador
3 shared publications Leandro González
The Centre for Automation and Robotics,Madrid,Espaa
2 shared publicationsW. Agila
Escuela Superior Politécnica del Litoral, ESPOL, Facultad de Ingeniería en Electricidad y Computación, CIDIS,Guayaquil,Ecuador
2 shared publications- Wilton Agila
ESPOL Polytechnic University, Escuela Superior Politécnica del Litoral, ESPOL
2 shared publications David Sanaguano
1 shared publication
Latest Publications
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 273-278
A Numerical Model for the Transport of Reactants in Proton Exchange Fuel Cells
Energy has allowed the development of our society and currently, the hydrogen-powered fuel cell is the most promising energy source of the future since it would help to eliminate serious problems such as climate change and economic inequality. The fuel cell converts the chemical energy of the reactants used into electrical energy and produces water and heat as by-products during its operation. The proton exchange membrane fuel cell is expected to play a key role in the future energy system due to its favourable characteristics and its application in mobile phones, electric vehicles, distributed power systems, submarines and aerospace applications. To optimize the operation of the fuel cell, models have been developed that represent it as a structural, dimensional, thermal and state system, which requires -as a contribution to technological development-, a strategic and systemic vision. The document analyzes the technique of numerical methods, to ensure optimal operation of the Proton exchange membrane fuel cell, addressing non-linearities of electrical behaviour and the imprecision of the physical world.
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 273-278
A Numerical Model for the Transport of Reactants in Proton Exchange Fuel Cells
Energy has allowed the development of our society and currently, the hydrogen-powered fuel cell is the most promising energy source of the future since it would help to eliminate serious problems such as climate change and economic inequality. The fuel cell converts the chemical energy of the reactants used into electrical energy and produces water and heat as by-products during its operation. The proton exchange membrane fuel cell is expected to play a key role in the future energy system due to its favourable characteristics and its application in mobile phones, electric vehicles, distributed power systems, submarines and aerospace applications. To optimize the operation of the fuel cell, models have been developed that represent it as a structural, dimensional, thermal and state system, which requires -as a contribution to technological development-, a strategic and systemic vision. The document analyzes the technique of numerical methods, to ensure optimal operation of the Proton exchange membrane fuel cell, addressing non-linearities of electrical behaviour and the imprecision of the physical world.
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 7, 365-371
Qualitative Model for an Oxygen Therapy System based on Renewable Energy
In Ecuador, the existence of chronic obstructive pulmonary diseases and the appearance of new viruses such as Covid-19 that cause respiratory problems, influence the development of oxygen therapy services. These services improve the health of some patients and increase life expectancy in others. However, the limited care capacities in the hospital centers of Ecuador and the lack of development of self-sufficient technological equipment for the provision of therapeutic oxygen services, mean that said service is carried out mainly in large cities, leaving aside other geographical areas with populations that also require it. This article explores the implementation of an oxygen therapy system based on the use of alternative energies, to be used in the treatment of people who cannot do without supplemental oxygenation in communes and homes. In addition, a control system based on linguistic rules for oxygen supply is proposed. Finally, the closed loop response of the control system is analyzed.
- 29 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 7, 365-371
Qualitative Model for an Oxygen Therapy System based on Renewable Energy
In Ecuador, the existence of chronic obstructive pulmonary diseases and the appearance of new viruses such as Covid-19 that cause respiratory problems, influence the development of oxygen therapy services. These services improve the health of some patients and increase life expectancy in others. However, the limited care capacities in the hospital centers of Ecuador and the lack of development of self-sufficient technological equipment for the provision of therapeutic oxygen services, mean that said service is carried out mainly in large cities, leaving aside other geographical areas with populations that also require it. This article explores the implementation of an oxygen therapy system based on the use of alternative energies, to be used in the treatment of people who cannot do without supplemental oxygenation in communes and homes. In addition, a control system based on linguistic rules for oxygen supply is proposed. Finally, the closed loop response of the control system is analyzed.
- Open Access
Distributed Intelligence in Autonomous PEM Fuel Cell Control
A combination of perceptive and deliberative processes is necessary to ensure the efficient and autonomous control of proton exchange membrane fuel cells (PEMFCs) under optimal humidification conditions. These processes enable monitoring and control tasks across various application scenarios and operating conditions. Consequently, it becomes crucial to adjust parameter values corresponding to different states of the PEMFC during its operation. In this context, this work presents the design and development of an architecture for the control and management of a PEMFC with a maximum power output of 500 [W] based on intelligent agents operating under optimal conditions (membrane humidification). The proposed architecture integrates perception and action algorithms that leverage sensory and contextual information using heuristic algorithms. It adopts a hierarchical structure with distinct layers, each featuring varying time windows and levels of abstraction. Notably, this architecture demonstrates its effectiveness in achieving the desired energy efficiency objective, as evidenced by successful validation tests conducted with different electrical power values delivered by the fuel cell, encompassing three distinct operating states (dry, normal, and flooded). An exemplary application of this scheme is the dynamic control of the humidification of the polymeric membrane, which further highlights the capabilities of this architecture.
Open AccessDistributed Intelligence in Autonomous PEM Fuel Cell Control
A combination of perceptive and deliberative processes is necessary to ensure the efficient and autonomous control of proton exchange membrane fuel cells (PEMFCs) under optimal humidification conditions. These processes enable monitoring and control tasks across various application scenarios and operating conditions. Consequently, it becomes crucial to adjust parameter values corresponding to different states of the PEMFC during its operation. In this context, this work presents the design and development of an architecture for the control and management of a PEMFC with a maximum power output of 500 [W] based on intelligent agents operating under optimal conditions (membrane humidification). The proposed architecture integrates perception and action algorithms that leverage sensory and contextual information using heuristic algorithms. It adopts a hierarchical structure with distinct layers, each featuring varying time windows and levels of abstraction. Notably, this architecture demonstrates its effectiveness in achieving the desired energy efficiency objective, as evidenced by successful validation tests conducted with different electrical power values delivered by the fuel cell, encompassing three distinct operating states (dry, normal, and flooded). An exemplary application of this scheme is the dynamic control of the humidification of the polymeric membrane, which further highlights the capabilities of this architecture.
- 4 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Approximate Reasoning Techniques in the Control of States of Operation of the PEM Fuel Cell
Among the different types of fuel cells, the proton-exchange membrane fuel cell (PEMFC) has attracted much interest as a power source for residential applications and electric vehicles. However, the development of new applications and the validation of new components of PEMFC require the characterization of their electrical response under certain conditions, both of operation (state variables) and power to be supplied (variation of electrical load), as well as the humidity degree of the membrane (operating state of the PEMFC considered Normal). Under this context, in this study, a set of specific processes based on approximate reasoning techniques have been designed and implemented for the dynamic control of the humidification of the polymeric membrane.
- 4 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Approximate Reasoning Techniques in the Control of States of Operation of the PEM Fuel Cell
Among the different types of fuel cells, the proton-exchange membrane fuel cell (PEMFC) has attracted much interest as a power source for residential applications and electric vehicles. However, the development of new applications and the validation of new components of PEMFC require the characterization of their electrical response under certain conditions, both of operation (state variables) and power to be supplied (variation of electrical load), as well as the humidity degree of the membrane (operating state of the PEMFC considered Normal). Under this context, in this study, a set of specific processes based on approximate reasoning techniques have been designed and implemented for the dynamic control of the humidification of the polymeric membrane.
- Open Access
A Fuzzy Model to Manage Water in Polymer Electrolyte Membrane Fuel Cells
In this paper, a fuzzy model is presented to determine in real-time the degree of dehydration or flooding of a proton exchange membrane of a fuel cell, to optimize its electrical response, and, consequently, its autonomous operation. By applying load, current, and flux variations in the dry, normal, and flooded states of the membrane, it was determined that the temporal evolution of the fuel cell voltage is characterized by changes in slope and by its voltage oscillations. The results were validated using electrochemical impedance spectroscopy and show slope changes from 0.435 to 0.52 and oscillations from 3.6 to 5.2 mV in the dry state, and slope changes from 0.2 to 0.3 and oscillations from 1 to 2 mV in the flooded state. The use of fuzzy logic is a novelty and constitutes a step towards the progressive automation of the supervision, perception, and intelligent control of fuel cells, allowing them to reduce their risks and increase their economic benefits.
Open AccessA Fuzzy Model to Manage Water in Polymer Electrolyte Membrane Fuel Cells
In this paper, a fuzzy model is presented to determine in real-time the degree of dehydration or flooding of a proton exchange membrane of a fuel cell, to optimize its electrical response, and, consequently, its autonomous operation. By applying load, current, and flux variations in the dry, normal, and flooded states of the membrane, it was determined that the temporal evolution of the fuel cell voltage is characterized by changes in slope and by its voltage oscillations. The results were validated using electrochemical impedance spectroscopy and show slope changes from 0.435 to 0.52 and oscillations from 3.6 to 5.2 mV in the dry state, and slope changes from 0.2 to 0.3 and oscillations from 1 to 2 mV in the flooded state. The use of fuzzy logic is a novelty and constitutes a step towards the progressive automation of the supervision, perception, and intelligent control of fuel cells, allowing them to reduce their risks and increase their economic benefits.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Open Control Architecture for the Characterization and Control of the PEM Fuel Cell
Fuel cell with protonic conduction (PEM), constitute an electrical energy source efficient and clean. The analysis of its operation requires experimental works, that allow measuring, modelling and optimizing its electrical behavior under various operating conditions. That’s why it is essential to have an experimental platform that allows for easy study and control. In this work is presented the design and implementation of an open instrumental system that allows the control, measuring and determination of the operating parameters of a PEM fuel cell. As a result, shows the polarization curves, voltage-current, obtained by the system itself in different experimental conditions. These curves constitute a useful tool to assess the electrical behavior of the stack PEM.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Open Control Architecture for the Characterization and Control of the PEM Fuel Cell
Fuel cell with protonic conduction (PEM), constitute an electrical energy source efficient and clean. The analysis of its operation requires experimental works, that allow measuring, modelling and optimizing its electrical behavior under various operating conditions. That’s why it is essential to have an experimental platform that allows for easy study and control. In this work is presented the design and implementation of an open instrumental system that allows the control, measuring and determination of the operating parameters of a PEM fuel cell. As a result, shows the polarization curves, voltage-current, obtained by the system itself in different experimental conditions. These curves constitute a useful tool to assess the electrical behavior of the stack PEM.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 244-252
Transient Analysis in Proton Exchange Membrane Fuel Cells: A Critical Review and a Novel Model
The scope of this document is to provide a comprehensive overview of the transient response of proton exchange membrane (PEM) fuel cell. When a PEM fuel cell operates it produces in addition to electrical energy, heat, and water as sub-products, which impact the performance of the cell. This paper analyses the issue of transients in PEM fuel cells including electrochemical reactions, two-phase flow, and thermal transients. Proposes a model that describes the dynamic operation of the PEM, considering the transients produced by electrochemical reactions and by flow water; the transient evolutions of voltage is modeled with a sum of two exponential decay functions and amplitude factors are correlated to steady-state operating. To understand the transient behavior is critical for reliable and predictable performance of the fuel cell.
- 1 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 244-252
Transient Analysis in Proton Exchange Membrane Fuel Cells: A Critical Review and a Novel Model
The scope of this document is to provide a comprehensive overview of the transient response of proton exchange membrane (PEM) fuel cell. When a PEM fuel cell operates it produces in addition to electrical energy, heat, and water as sub-products, which impact the performance of the cell. This paper analyses the issue of transients in PEM fuel cells including electrochemical reactions, two-phase flow, and thermal transients. Proposes a model that describes the dynamic operation of the PEM, considering the transients produced by electrochemical reactions and by flow water; the transient evolutions of voltage is modeled with a sum of two exponential decay functions and amplitude factors are correlated to steady-state operating. To understand the transient behavior is critical for reliable and predictable performance of the fuel cell.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1221-1226
Qualitative Model of Control in the Pressure Stabilization of PEM Fuel Cell
This work describes an approximate reasoning technique to deal with the non-linearity that occurs in the stabilization of the pressure of anodic and cathodic gases of a proton exchange membrane fuel cell (PEM). The implementation of a supervisory element in the stabilization of the pressure of the PEM cell is described. The fuzzy supervisor is a reference control, it varies the value of the reference given to the classic low-level controller, Proportional - Integral - Derivative (PID), according to the speed of change of the measured pressure and the change in the error of the pressure. The objective of the fuzzy supervisor is to achieve a rapid response over time of the variable pressure, avoiding unwanted overruns with respect to the reference value. A comparative analysis is detailed with the classic PID control to evaluate the operation of the “fuzzy supervisor with different flow values and different sizes of active area of the PEM cell (electric power generated).
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1221-1226
Qualitative Model of Control in the Pressure Stabilization of PEM Fuel Cell
This work describes an approximate reasoning technique to deal with the non-linearity that occurs in the stabilization of the pressure of anodic and cathodic gases of a proton exchange membrane fuel cell (PEM). The implementation of a supervisory element in the stabilization of the pressure of the PEM cell is described. The fuzzy supervisor is a reference control, it varies the value of the reference given to the classic low-level controller, Proportional - Integral - Derivative (PID), according to the speed of change of the measured pressure and the change in the error of the pressure. The objective of the fuzzy supervisor is to achieve a rapid response over time of the variable pressure, avoiding unwanted overruns with respect to the reference value. A comparative analysis is detailed with the classic PID control to evaluate the operation of the “fuzzy supervisor with different flow values and different sizes of active area of the PEM cell (electric power generated).