Engelbert Huape Padilla
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Engelbert Huape Padilla has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Ariosto Medina
Instituto de Investigaciones en Metalurgia y Materiales, Universidad Michoacana de San Nicolás de Hidalgo, Av. J. Múgica S/N, Morelia 58030, Michoacán, Mexico
3 shared publications - Hector Carreon
Instituto de Investigación en Metalurgia y Materiales, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Mexico
3 shared publications - Jose Luis Bernal Ponce
National Technological Institute of Mexico/Technological Institute of Orizaba, Orizaba, Mexico, Orizaba, Mexico, Mexico
3 shared publications - Ilse Arreola
Institute of Research in Metallurgy and Materials, Universidad Michoacana de San Nicolás de Hidalgo, Morelia 58030, Mexico
2 shared publications M. Sanchez-Carrillo
Universidad Tecnológica de Chihuahua Sur, Chihuahua. Chih. México
2 shared publications- Martin Flores
Departamento de Ingeniería de Proyectos, Centro Universitario de Ciencias Exactas e Ingenierías (CUCEI), Universidad de Guadalajara, Guadalajara 44430, Jalisco, Mexico
2 shared publications
Latest Publications
- Open Access
- 28 July 2026
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Cuenca del Lago de Pátzcuaro: deterioro ambiental y desafíos de gestión
Las cuencas lacustres son sistemas socioecológicos complejos donde interactúan procesos hidrológicos, ecológicos y sociales. En México, existe una brecha entre el conocimiento científico y su aplicación en políticas públicas, lo que limita la conservación efectiva de estos sistemas. El caso del lago de Pátzcuaro ejemplifica esta problemática, ya que ha sido históricamente transformado por actividades humanas y posee un alto valor cultural para las comunidades purépechas. Su carácter endorreico lo hace vulnerable a alteraciones en el balance hídrico y a la acumulación de contaminantes. En las últimas décadas, ha enfrentado degradación ambiental debido a la disminución del nivel del agua, eutrofización, contaminación y sedimentación. Aunque existen avances en política hídrica, como el Plan Nacional Hídrico 2024–2030 impulsado durante la administración de Claudia Sheinbaum, su implementación efectiva sigue siendo limitada. Este trabajo analiza la situación ambiental del lago mediante revisión científica y evaluación de políticas públicas mediante un análisis sistemático bajo el esquema SALSA lo que permite identificar áreas de oportunidad para su conservación y restauración.
- 28 July 2026
- Published by FapUNIFESP (SciELO) in SciELO Preprints
Open AccessCuenca del Lago de Pátzcuaro: deterioro ambiental y desafíos de gestión
Las cuencas lacustres son sistemas socioecológicos complejos donde interactúan procesos hidrológicos, ecológicos y sociales. En México, existe una brecha entre el conocimiento científico y su aplicación en políticas públicas, lo que limita la conservación efectiva de estos sistemas. El caso del lago de Pátzcuaro ejemplifica esta problemática, ya que ha sido históricamente transformado por actividades humanas y posee un alto valor cultural para las comunidades purépechas. Su carácter endorreico lo hace vulnerable a alteraciones en el balance hídrico y a la acumulación de contaminantes. En las últimas décadas, ha enfrentado degradación ambiental debido a la disminución del nivel del agua, eutrofización, contaminación y sedimentación. Aunque existen avances en política hídrica, como el Plan Nacional Hídrico 2024–2030 impulsado durante la administración de Claudia Sheinbaum, su implementación efectiva sigue siendo limitada. Este trabajo analiza la situación ambiental del lago mediante revisión científica y evaluación de políticas públicas mediante un análisis sistemático bajo el esquema SALSA lo que permite identificar áreas de oportunidad para su conservación y restauración.
- Open Access
Electrochemical Corrosion Behavior of HiPIMS-Deposited Diamond-like Carbon (DLC) Coatings on AISI 52100 Steel in Synthetic Seawater
This manuscript evaluates the electrochemical corrosion resistance of diamond-like carbon (DLC) coatings deposited via High-Power Impulse Magnetron Sputtering (HiPIMS) on AISI 52100 steel in synthetic seawater. While AISI 52100 steel is valued for its hardness, it is highly susceptible to localized and uniform corrosion in chloride-rich marine environments. In this study, samples were characterized using Raman spectroscopy to analyze sp2/sp3 bonding, and their corrosion behavior was assessed through potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) over 24 h of immersion. Results demonstrated that the DLC coatings significantly enhanced electrochemical stability, shifting corrosion potentials toward more noble values and reducing the corrosion current density from (1.81 ± 0.12) × 10−7 to (1.03 ± 0.09) × 10−9 mA·cm−2. EIS data revealed high polarization resistance and effective barrier properties, despite a calculated total porosity of 3.06% resulting from intrinsic micro-defects. Although localized subsurface degradation and minor flaking were observed at defect sites, the HiPIMS-deposited DLC coatings effectively mitigated the corrosive impact of synthetic seawater, providing a significant contribution to the electrochemical barrier despite the persistence of electrolyte accessibility mediated by localized defects.
Open AccessElectrochemical Corrosion Behavior of HiPIMS-Deposited Diamond-like Carbon (DLC) Coatings on AISI 52100 Steel in Synthetic Seawater
This manuscript evaluates the electrochemical corrosion resistance of diamond-like carbon (DLC) coatings deposited via High-Power Impulse Magnetron Sputtering (HiPIMS) on AISI 52100 steel in synthetic seawater. While AISI 52100 steel is valued for its hardness, it is highly susceptible to localized and uniform corrosion in chloride-rich marine environments. In this study, samples were characterized using Raman spectroscopy to analyze sp2/sp3 bonding, and their corrosion behavior was assessed through potentiodynamic polarization, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) over 24 h of immersion. Results demonstrated that the DLC coatings significantly enhanced electrochemical stability, shifting corrosion potentials toward more noble values and reducing the corrosion current density from (1.81 ± 0.12) × 10−7 to (1.03 ± 0.09) × 10−9 mA·cm−2. EIS data revealed high polarization resistance and effective barrier properties, despite a calculated total porosity of 3.06% resulting from intrinsic micro-defects. Although localized subsurface degradation and minor flaking were observed at defect sites, the HiPIMS-deposited DLC coatings effectively mitigated the corrosive impact of synthetic seawater, providing a significant contribution to the electrochemical barrier despite the persistence of electrolyte accessibility mediated by localized defects.
- Open Access
- 30 April 2026
- Published by MDPI AG in Preprints.org
Electrochemical Corrosion Behavior of HiPIMS‑Deposited Diamond‑Like Carbon (DLC) Coatings on AISI 52100 Steel in Synthetic Seawater
This manuscript evaluates the electrochemical corrosion resistance of diamond-like car-bon (DLC) coatings deposited via High-Power Impulse Magnetron Sputtering (HiPIMS) on AISI 52100 steel in synthetic seawater. While AISI 52100 steel is valued for its hardness, it is highly susceptible to localized and uniform corrosion in chloride-rich marine environ-ments. In this study, samples were characterized using Raman spectroscopy to analyze sp2/sp3 bonding, and their corrosion behavior was assessed through potentiodynamic po-larization, linear polarization resistance (LPR), and electrochemical impedance spectros-copy (EIS) over 24 hours of immersion. Results demonstrated that the DLC coatings signif-icantly enhanced electrochemical stability, shifting corrosion potentials toward more no-ble values and reducing corrosion current densities by several orders of magnitude com-pared to the uncoated substrate. EIS data revealed high polarization resistance and effec-tive barrier properties, despite a calculated total porosity of 3.06% resulting from intrinsic micro-defects. Although localized subsurface degradation and minor flaking were ob-served at defect sites, the HiPIMS-deposited DLC coatings effectively mitigated the corro-sive impact of synthetic seawater, providing a robust protective barrier for high-precision steel components.
- 30 April 2026
- Published by MDPI AG in Preprints.org
Open AccessElectrochemical Corrosion Behavior of HiPIMS‑Deposited Diamond‑Like Carbon (DLC) Coatings on AISI 52100 Steel in Synthetic Seawater
This manuscript evaluates the electrochemical corrosion resistance of diamond-like car-bon (DLC) coatings deposited via High-Power Impulse Magnetron Sputtering (HiPIMS) on AISI 52100 steel in synthetic seawater. While AISI 52100 steel is valued for its hardness, it is highly susceptible to localized and uniform corrosion in chloride-rich marine environ-ments. In this study, samples were characterized using Raman spectroscopy to analyze sp2/sp3 bonding, and their corrosion behavior was assessed through potentiodynamic po-larization, linear polarization resistance (LPR), and electrochemical impedance spectros-copy (EIS) over 24 hours of immersion. Results demonstrated that the DLC coatings signif-icantly enhanced electrochemical stability, shifting corrosion potentials toward more no-ble values and reducing corrosion current densities by several orders of magnitude com-pared to the uncoated substrate. EIS data revealed high polarization resistance and effec-tive barrier properties, despite a calculated total porosity of 3.06% resulting from intrinsic micro-defects. Although localized subsurface degradation and minor flaking were ob-served at defect sites, the HiPIMS-deposited DLC coatings effectively mitigated the corro-sive impact of synthetic seawater, providing a robust protective barrier for high-precision steel components.
- 1 August 2018
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 24 (S1) , 1094-1095
Characterization of Carbon Nanotubes with TiO2 by the (CVD) Chemical Vapor Deposition Method
- 1 August 2018
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 24 (S1) , 1094-1095
Characterization of Carbon Nanotubes with TiO2 by the (CVD) Chemical Vapor Deposition Method
- 1 August 2018
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 24 (S1) , 1086-1087
XPS Study of Corrosion Deposit in Stainless Steel Hardfacing
- 1 August 2018
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 24 (S1) , 1086-1087
XPS Study of Corrosion Deposit in Stainless Steel Hardfacing
- Open Access
- 19 July 2018
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 23 (2)
Electrochemical corrosion characterization of nickel aluminides in acid rain
Nickel aluminides have been extensively studied in recent decades to replace superalloys, in some components of aircraft turbines, because they have excellent corrosion resistance. Many industrial cities have the problem of air pollution, which has forced the study of the degradation of these alloys in the presence of acid rain. The aim of this work is to study the electrochemical corrosion behavior of nickel aluminides in a medium of simulated acid rain. Potentiodynamic Polarization, Linear polarization resistance curves, Rp, Nyquist data and Bode curves obtained by electrochemical impedance spectroscopy were used to study the corrosion behavior of two intermetallic compounds. The polarization curves show that both intermetallic Ni3Al and NiAl have very similar corrosion potential, showing a slightly nobler behavior the NiAl intermetallic. The intermetallic Ni3Al has an active-passive behavior where the anode branch presents a general dissolution of the alloy, indicating that it is under cathodic control. NiAl intermetallic shows an active dissolution region, followed by a passive behavior. At longer immersion times, Ni3Al intermetallic has a higher polarization resistance, which means a lower corrosion rate.
- 19 July 2018
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 23 (2)
Open AccessElectrochemical corrosion characterization of nickel aluminides in acid rain
Nickel aluminides have been extensively studied in recent decades to replace superalloys, in some components of aircraft turbines, because they have excellent corrosion resistance. Many industrial cities have the problem of air pollution, which has forced the study of the degradation of these alloys in the presence of acid rain. The aim of this work is to study the electrochemical corrosion behavior of nickel aluminides in a medium of simulated acid rain. Potentiodynamic Polarization, Linear polarization resistance curves, Rp, Nyquist data and Bode curves obtained by electrochemical impedance spectroscopy were used to study the corrosion behavior of two intermetallic compounds. The polarization curves show that both intermetallic Ni3Al and NiAl have very similar corrosion potential, showing a slightly nobler behavior the NiAl intermetallic. The intermetallic Ni3Al has an active-passive behavior where the anode branch presents a general dissolution of the alloy, indicating that it is under cathodic control. NiAl intermetallic shows an active dissolution region, followed by a passive behavior. At longer immersion times, Ni3Al intermetallic has a higher polarization resistance, which means a lower corrosion rate.
- Open Access
- 1 July 2017
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 23 (S1) , 1096-1097
SEM Study of Corrosion Deposits of Ni-Mn-Ga Fe Doped Shape Memory Alloys
- 1 July 2017
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 23 (S1) , 1096-1097
Open AccessSEM Study of Corrosion Deposits of Ni-Mn-Ga Fe Doped Shape Memory Alloys
- Open Access
- 14 December 2015
- Published by Hindawi Limited in Journal of Spectroscopy
- Vol. 2015, 1-9
Opuntia ficus-indicaExtract as Green Corrosion Inhibitor for Carbon Steel in 1 M HCl Solution
The effect ofOpuntia ficus-indica(Nopal) as green corrosion inhibitor for carbon steel in 1 M HCl solution has been investigated by using weight loss tests, potentiodynamic polarization curves, and electrochemical impedance spectroscopy measurements. Also, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) analysis were performed. The inhibitor concentrations used ranged from 0 to 300 ppm at 25, 40, and 60°C. Results indicated the inhibition efficiency increases with increasing extract concentration and decreases with the temperature, and the inhibitor acted as a cathodic-type inhibitor which is physically absorbed onto the steel surface. In fact, the adsorption of the inhibitor on the steel surface follows the Langmuir adsorption isotherm, indicating monolayer adsorption. The presence of heteroatoms such as C, N, and O and OH groups were responsible for the corrosion inhibition.
- 14 December 2015
- Published by Hindawi Limited in Journal of Spectroscopy
- Vol. 2015, 1-9
Open AccessOpuntia ficus-indicaExtract as Green Corrosion Inhibitor for Carbon Steel in 1 M HCl Solution
The effect ofOpuntia ficus-indica(Nopal) as green corrosion inhibitor for carbon steel in 1 M HCl solution has been investigated by using weight loss tests, potentiodynamic polarization curves, and electrochemical impedance spectroscopy measurements. Also, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) analysis were performed. The inhibitor concentrations used ranged from 0 to 300 ppm at 25, 40, and 60°C. Results indicated the inhibition efficiency increases with increasing extract concentration and decreases with the temperature, and the inhibitor acted as a cathodic-type inhibitor which is physically absorbed onto the steel surface. In fact, the adsorption of the inhibitor on the steel surface follows the Langmuir adsorption isotherm, indicating monolayer adsorption. The presence of heteroatoms such as C, N, and O and OH groups were responsible for the corrosion inhibition.