Azam Hussain
Research Subjects
Azam Hussain has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Jinlin Xie
Department of Modern Physics, University of Science and Technology of China, Hefei, People’s Republic of China
3 shared publications- Zahoor Ahmad
National Tokamak Fusion Program
3 shared publications - Asad Yaqoob Mian
Pakistan Tokamak Plasma Research Institute, Islamabad, Pakistan
2 shared publications - Wandong Liu
Department of Plasma Physics and Fusion Engineering, University of Science and Technology of China 1 , Hefei 230026
2 shared publications - Abdul Qayyum
National Tokamak Fusion Program, Islamabad, Pakistan
1 shared publication Adi Liu
School of Physical Sciences, University of Science and Technology of China, Hefei, Anhui 230026, China
1 shared publication
Latest Publications
- 16 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (26)
Plasma radiation simulation and tomographic reconstruction methods for multi-array bolometer system design on the MT-I spherical tokamak
Radiative losses from impurity species play a decisive role in determining the energy balance, performance and stability in fusion plasma devices. This article presents a comprehensive end-to-end simulation framework for the preliminary design of a multi-array Absolute Extreme Ultraviolet (AXUV) photodiode bolometry system for the MT-I spherical tokamak. The proposed configuration employs 48 viewing chords distributed across three poloidal arrays at ±45° and 90°, providing enhanced spatial coverage for elongated plasma geometries. The framework integrates impurity radiation modelling based on ADAS coronal equilibrium cooling coefficients for carbon, oxygen, and iron with a forward diagnostic model incorporating line-of-sight integration, etendue-based signal estimation, and detector response characteristics. Tomographic reconstruction is performed using Minimum Fisher Information regularization (MFR) and Phillips–Tikhonov regularization (PTR). Under 3% Gaussian noise, a conservative lower bound for realistic AXUV system uncertainties, both methods achieve stable and comparable accuracy; however, MFR demonstrates improved preservation of edge gradients, while PTR yields smoother and more robust solutions in noise-affected regions. Reconstruction fidelity is significantly enhanced by multi-angle coverage, reducing the root-mean-square error from approximately 18% in two-array configurations to approximately 11–12% with three arrays. Regularization parameters are optimized using L-curve analysis and the discrepancy principle, with the latter showing greater reliability for sparse-view conditions. This evaluated framework provides quantitative guidance for diagnostic design and establishes a reliable basis for radiant emission coefficient reconstruction and data interpretation in spherical tokamaks and other compact fusion devices.
- 16 June 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (26)
Plasma radiation simulation and tomographic reconstruction methods for multi-array bolometer system design on the MT-I spherical tokamak
Radiative losses from impurity species play a decisive role in determining the energy balance, performance and stability in fusion plasma devices. This article presents a comprehensive end-to-end simulation framework for the preliminary design of a multi-array Absolute Extreme Ultraviolet (AXUV) photodiode bolometry system for the MT-I spherical tokamak. The proposed configuration employs 48 viewing chords distributed across three poloidal arrays at ±45° and 90°, providing enhanced spatial coverage for elongated plasma geometries. The framework integrates impurity radiation modelling based on ADAS coronal equilibrium cooling coefficients for carbon, oxygen, and iron with a forward diagnostic model incorporating line-of-sight integration, etendue-based signal estimation, and detector response characteristics. Tomographic reconstruction is performed using Minimum Fisher Information regularization (MFR) and Phillips–Tikhonov regularization (PTR). Under 3% Gaussian noise, a conservative lower bound for realistic AXUV system uncertainties, both methods achieve stable and comparable accuracy; however, MFR demonstrates improved preservation of edge gradients, while PTR yields smoother and more robust solutions in noise-affected regions. Reconstruction fidelity is significantly enhanced by multi-angle coverage, reducing the root-mean-square error from approximately 18% in two-array configurations to approximately 11–12% with three arrays. Regularization parameters are optimized using L-curve analysis and the discrepancy principle, with the latter showing greater reliability for sparse-view conditions. This evaluated framework provides quantitative guidance for diagnostic design and establishes a reliable basis for radiant emission coefficient reconstruction and data interpretation in spherical tokamaks and other compact fusion devices.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (7) , 1-13
Impurity Radiation Simulation and Abel Inversion Methods for AXUV Bolometer Design for MT-I Tokamak
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (7) , 1-13
Impurity Radiation Simulation and Abel Inversion Methods for AXUV Bolometer Design for MT-I Tokamak
- Open Access
- 30 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055608
Investigation of sawtooth oscillations and quasi-interchange mode in the experimental advanced superconducting tokamak
Saturated sawtooth oscillations of the (1,1) mode and its higher harmonics are observed in ELMy H-mode discharges at the EAST facility. Their spatial and temporal characteristics are ascertained using singular value decomposition (SVD) and short-time Fourier transform (STFT). In non-NBI heating discharges, partial collapse is detected during the mid-precursor stage of sawtooth oscillations when the minimum safety factor (q min) is ≤1. However, in NBI heating discharges, higher harmonic modes are detected during the precursor and collapse phases of the sawtooth when q min ≥ 1. Furthermore, these mode patterns are developed at the onset of NBI heating, during which the plasma exhibits a gradual decrease in poloidal beta (β p ) and electron temperature, along with a loss of fast ions due to ELM activity. However, the ion temperature remains unchanged due to the continuous effect of NBI heating. These saturated modes are susceptible to quasi-interchange instabilities, influenced by the hybrid operational mode of the EAST facility, which is characterized by q min ≥ 1, low core magnetic shear, and high-pressure gradients. These experimental findings are consistent with interchange instability theories and previous numerical studies, particularly in conditions where q min ≥ 1 and higher harmonic modes are critical in sawtooth collapse. However, these modes deviate from the predictions of the Kadomtsev model.
- 30 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055608
Open AccessInvestigation of sawtooth oscillations and quasi-interchange mode in the experimental advanced superconducting tokamak
Saturated sawtooth oscillations of the (1,1) mode and its higher harmonics are observed in ELMy H-mode discharges at the EAST facility. Their spatial and temporal characteristics are ascertained using singular value decomposition (SVD) and short-time Fourier transform (STFT). In non-NBI heating discharges, partial collapse is detected during the mid-precursor stage of sawtooth oscillations when the minimum safety factor (q min) is ≤1. However, in NBI heating discharges, higher harmonic modes are detected during the precursor and collapse phases of the sawtooth when q min ≥ 1. Furthermore, these mode patterns are developed at the onset of NBI heating, during which the plasma exhibits a gradual decrease in poloidal beta (β p ) and electron temperature, along with a loss of fast ions due to ELM activity. However, the ion temperature remains unchanged due to the continuous effect of NBI heating. These saturated modes are susceptible to quasi-interchange instabilities, influenced by the hybrid operational mode of the EAST facility, which is characterized by q min ≥ 1, low core magnetic shear, and high-pressure gradients. These experimental findings are consistent with interchange instability theories and previous numerical studies, particularly in conditions where q min ≥ 1 and higher harmonic modes are critical in sawtooth collapse. However, these modes deviate from the predictions of the Kadomtsev model.
- 1 May 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 203
Preliminary design of an AXUV photodiode-based bolometer camera for MT-I spherical tokamak
- 1 May 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 203
Preliminary design of an AXUV photodiode-based bolometer camera for MT-I spherical tokamak
- 15 March 2021
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 176 (7-8) , 591-600
Experimental investigation of a partial collapse during the sawtooth instability in EAST
In this article, partial and full collapses of sawtooth activity are investigated with the high-resolution two-dimensional electron cyclotron emission (ECE) Imaging diagnostic in EAST. The partial collapse in normal sawtooth behavior is detected during the precursor phase of an L-mode plasma heated by ICRF. The electron heat diffusivity is determined with the time-to-peak analysis. The experimental results revealed that heat diffusivity suppresses at the time of the partial collapse. As a result, the partial collapse process interrupts and the small amount of heat releases outward. The hot core survives and is enclosed by the cold magnetic island. The inversion radii are estimated with the help of sawtooth and the only single inversion radius is found during the entire collapse process.
- 15 March 2021
- Published by Taylor & Francis in Radiation Effects and Defects in Solids
- Vol. 176 (7-8) , 591-600
Experimental investigation of a partial collapse during the sawtooth instability in EAST
In this article, partial and full collapses of sawtooth activity are investigated with the high-resolution two-dimensional electron cyclotron emission (ECE) Imaging diagnostic in EAST. The partial collapse in normal sawtooth behavior is detected during the precursor phase of an L-mode plasma heated by ICRF. The electron heat diffusivity is determined with the time-to-peak analysis. The experimental results revealed that heat diffusivity suppresses at the time of the partial collapse. As a result, the partial collapse process interrupts and the small amount of heat releases outward. The hot core survives and is enclosed by the cold magnetic island. The inversion radii are estimated with the help of sawtooth and the only single inversion radius is found during the entire collapse process.
- 14 July 2020
- Published by IOP Publishing in Plasma Research Express
- Vol. 2 (3) , 035004
Development of magnetic diagnostics for Glass Spherical Tokamak (GLAST)
GLAST is a small spherical tokamak with an insulating vacuum vessel of pyrex. It has major and minor radii of 20 and 10 cm, respectively. Magnetic measurements play a fundamental role in plasma breakdown and start-up studies. This paper presents the development, fabrication, calibration, and installation of magnetic diagnostics on GLAST III Tokamak. Magnetic diagnostics consist of the flux loops, magnetic field pickup sensors, and Rogowski coil. The signals obtained from various coils are integrated with passive analog integrators. The experimental results obtained from these magnetic diagnostics are presented and discussed.
- 14 July 2020
- Published by IOP Publishing in Plasma Research Express
- Vol. 2 (3) , 035004
Development of magnetic diagnostics for Glass Spherical Tokamak (GLAST)
GLAST is a small spherical tokamak with an insulating vacuum vessel of pyrex. It has major and minor radii of 20 and 10 cm, respectively. Magnetic measurements play a fundamental role in plasma breakdown and start-up studies. This paper presents the development, fabrication, calibration, and installation of magnetic diagnostics on GLAST III Tokamak. Magnetic diagnostics consist of the flux loops, magnetic field pickup sensors, and Rogowski coil. The signals obtained from various coils are integrated with passive analog integrators. The experimental results obtained from these magnetic diagnostics are presented and discussed.
- 1 March 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 152
Integrated data acquisition, storage and retrieval for glass spherical tokamak (GLAST)
- 1 March 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 152
Integrated data acquisition, storage and retrieval for glass spherical tokamak (GLAST)
- 1 October 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (10) , 10H119
In situ relative self-dependent calibration of electron cyclotron emission imaging via shape matching
Electron Cyclotron Emission Imaging (ECEI) is a diagnostic system which measures 2-D electron temperature profiles with high spatial-temporal resolution. Usually only the normalized electron temperature fluctuations are utilized to investigate the magnetohydrodynamics modes due to the difficulties of ECEI calibration. In this paper, we developed a self-dependent calibration method for 24 × 16 channel high-resolution ECEI on the Experimental Advanced Superconducting Tokamak. The technique of shape matching is applied to solve for the matrix of the calibration coefficients. The calibrated area is further expanded to an occupation ratio of 88% observation area by utilizing the features of sawtooth crash. The result is self-consistent and consistent with calibrated 1D ECE measurement.
- 1 October 2018
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (10) , 10H119
In situ relative self-dependent calibration of electron cyclotron emission imaging via shape matching
Electron Cyclotron Emission Imaging (ECEI) is a diagnostic system which measures 2-D electron temperature profiles with high spatial-temporal resolution. Usually only the normalized electron temperature fluctuations are utilized to investigate the magnetohydrodynamics modes due to the difficulties of ECEI calibration. In this paper, we developed a self-dependent calibration method for 24 × 16 channel high-resolution ECEI on the Experimental Advanced Superconducting Tokamak. The technique of shape matching is applied to solve for the matrix of the calibration coefficients. The calibrated area is further expanded to an occupation ratio of 88% observation area by utilizing the features of sawtooth crash. The result is self-consistent and consistent with calibrated 1D ECE measurement.
- 1 April 2016
- Published by AIP Publishing in Physics of Plasmas
- Vol. 23 (4) , 042504
Observations of compound sawteeth in ion cyclotron resonant heating plasma using ECE imaging on experimental advanced superconducting tokamak
The spatial and temporal evolutions of compound sawteeth were directly observed using 2D electron cyclotron emission imaging on experimental advanced superconducting tokamak. The compound sawtooth consists of partial and full collapses. After partial collapse, the hot core survives as only a small amount of heat disperses outwards, whereas in the following full collapse a large amount of heat is released and the hot core dissipates. The presence of two q = 1 surfaces was not observed. Instead, the compound sawtooth occurs mainly at the beginning of an ion cyclotron resonant frequency heating pulse and during the L-H transition phase, which may be related to heat transport suppression caused by a decrease in electron heat diffusivity.
- 1 April 2016
- Published by AIP Publishing in Physics of Plasmas
- Vol. 23 (4) , 042504
Observations of compound sawteeth in ion cyclotron resonant heating plasma using ECE imaging on experimental advanced superconducting tokamak
The spatial and temporal evolutions of compound sawteeth were directly observed using 2D electron cyclotron emission imaging on experimental advanced superconducting tokamak. The compound sawtooth consists of partial and full collapses. After partial collapse, the hot core survives as only a small amount of heat disperses outwards, whereas in the following full collapse a large amount of heat is released and the hot core dissipates. The presence of two q = 1 surfaces was not observed. Instead, the compound sawtooth occurs mainly at the beginning of an ion cyclotron resonant frequency heating pulse and during the L-H transition phase, which may be related to heat transport suppression caused by a decrease in electron heat diffusivity.
- 1 June 2015
- Published by IOP Publishing in Chinese Physics Letters
- Vol. 32 (6) , 065201
Electron Cyclotron Emission Imaging Observations of m/n = 1/1 and Higher Harmonic Modes during Sawtooth Oscillation in ICRF Heating Plasma on EAST
- 1 June 2015
- Published by IOP Publishing in Chinese Physics Letters
- Vol. 32 (6) , 065201
Electron Cyclotron Emission Imaging Observations of m/n = 1/1 and Higher Harmonic Modes during Sawtooth Oscillation in ICRF Heating Plasma on EAST