Miguel Ángel Fernández Prada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Miguel Ángel Fernández Prada has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- José Luis Bonet
ICITECH Universitat Politècnica de València Valencia Spain
15 shared publications - Manuel L. Romero
Instituto de Ciencia y Tecnología del Hormigón (ICITECH); Universitat Politècnica de València; Spain
7 shared publications - Luis Pallarés
Campus of Vera, Universitat Politècnica de Valencia, 46022 Valencia, Spain
6 shared publications P.F. Miguel
6 shared publications- Juan Navarro-Gregori
Institute of Concrete Science and Technology (ICITECH), Universitat Politècnica de València, Camino de Vera s/n, Building 4N, 46022 Valencia, Spain
5 shared publications Pedro F. Miguel
4 shared publications
Latest Publications
- 11 July 2024
- Published by Universitat Politecnica de Valencia
- p. 1-6
Explorando las dificultades de aprendizaje de los estudiantes de ingeniería civil en la disciplina de hormigón estructural
Se presenta una metodología de trabajo diseñada para la identificación de las dificultades de aprendizaje de los estudiantes del Grado en Ingeniería Civil de la Universitat Politècnica de València (UPV) de la asignatura “Hormigón Estructural”. Este estudio forma parte de un Proyecto de Innovación y Mejora Educativa (PIME) que persigue identificar los conceptos umbrales que los estudiantes de esta disciplina tienen que superar para llegar a entender el significado profundo de la disciplina del diseño de estructuras de hormigón. Como paso previo, se ha diseñado una metodología específica con el que detectar y medir el grado de intensidad de las dificultades de aprendizaje de una forma objetiva a lo largo de un curso académico. La metodología se desarrolla en tres acciones: (a) propuesta de cuestiones en clase; (b) pruebas de seguimiento oficiales; y (c) grupos de discusión. Esta metodología se ha empleado durante dos cursos consecutivos, lo que ha permitido valorar el efecto causado por las estrategias de intervención tras identificar las dificultades de aprendizaje detectadas durante el primer curso académico. El uso de esta estrategia docente de forma continuada puede permitir la adaptación de las metodologías docentes a las necesidades reales de los estudiantes de la asignatura
- 11 July 2024
- Published by Universitat Politecnica de Valencia
- p. 1-6
Explorando las dificultades de aprendizaje de los estudiantes de ingeniería civil en la disciplina de hormigón estructural
Se presenta una metodología de trabajo diseñada para la identificación de las dificultades de aprendizaje de los estudiantes del Grado en Ingeniería Civil de la Universitat Politècnica de València (UPV) de la asignatura “Hormigón Estructural”. Este estudio forma parte de un Proyecto de Innovación y Mejora Educativa (PIME) que persigue identificar los conceptos umbrales que los estudiantes de esta disciplina tienen que superar para llegar a entender el significado profundo de la disciplina del diseño de estructuras de hormigón. Como paso previo, se ha diseñado una metodología específica con el que detectar y medir el grado de intensidad de las dificultades de aprendizaje de una forma objetiva a lo largo de un curso académico. La metodología se desarrolla en tres acciones: (a) propuesta de cuestiones en clase; (b) pruebas de seguimiento oficiales; y (c) grupos de discusión. Esta metodología se ha empleado durante dos cursos consecutivos, lo que ha permitido valorar el efecto causado por las estrategias de intervención tras identificar las dificultades de aprendizaje detectadas durante el primer curso académico. El uso de esta estrategia docente de forma continuada puede permitir la adaptación de las metodologías docentes a las necesidades reales de los estudiantes de la asignatura
- Open Access
- 30 January 2023
- Published by CINTER in Hormigón y Acero
- Vol. 74 (299) , 41-60
Shear Resistance of Members Without Shear Reinforcement in Presence of Axial Forces in the Next Eurocode 2
The second generation of Eurocode 2 incorporates formulations based on physical models which are general enough for the assessment of existing structures but can be simplified for the design of new structures, in order to improve the ease-of-use. One of the areas where these improvements are addressed is the shear verification of members without shear reinforcement, such as solid slabs, walls, cut-and-cover tunnels, precast ribs or hollow core slabs, which in some cases are prestressed or subjected to external axial loading.In current Eurocode 2, the shear verification of these structures is based on an empirical formulation proposed by Zsutty in 1968. The final draft of the new version of Eurocode 2 has adopted the Critical Shear Crack Theory (CSCT) as the theoretical basis for the formulation of the shear resistance, which allows a better understanding of structural behaviour in many different conditions, not only for the design of new structures, but also for the assessment of existing structures. This formulation accounts for some aspects that are not well considered in current Eurocode 2, which have been underlined as shortcomings in recent years.The formulation for design of new structures in the final draft of the new version of Eurocode 2 (General Model) is easy to use for the verification of the shear resistance, but requires an iterative process to calculate the shear capacity of sections in the presence of axial forces. For this reason, the final draft of the new version of Eurocode 2 also provides an alternative non-iterative formulation (Linear Approach) to calculate the shear capacity in presence of compressive axial forces, based on the linearisation of the CSCT shear failure criterion and formulated with the same additive structure as in the current Eurocode 2, useful for the most common cases.This paper presents the General Model formulation provided in the next Eurocode 2 for the shear verification of axially loaded members without shear reinforcement, as well as the alternative formulation (linear approach). In addition, the agreement of both formulations with experimental results from an available shear test database on prestressed concrete beams is shown and the consistency of the safety treatment between the two formulations is also discussed.
- 30 January 2023
- Published by CINTER in Hormigón y Acero
- Vol. 74 (299) , 41-60
Open AccessShear Resistance of Members Without Shear Reinforcement in Presence of Axial Forces in the Next Eurocode 2
The second generation of Eurocode 2 incorporates formulations based on physical models which are general enough for the assessment of existing structures but can be simplified for the design of new structures, in order to improve the ease-of-use. One of the areas where these improvements are addressed is the shear verification of members without shear reinforcement, such as solid slabs, walls, cut-and-cover tunnels, precast ribs or hollow core slabs, which in some cases are prestressed or subjected to external axial loading.In current Eurocode 2, the shear verification of these structures is based on an empirical formulation proposed by Zsutty in 1968. The final draft of the new version of Eurocode 2 has adopted the Critical Shear Crack Theory (CSCT) as the theoretical basis for the formulation of the shear resistance, which allows a better understanding of structural behaviour in many different conditions, not only for the design of new structures, but also for the assessment of existing structures. This formulation accounts for some aspects that are not well considered in current Eurocode 2, which have been underlined as shortcomings in recent years.The formulation for design of new structures in the final draft of the new version of Eurocode 2 (General Model) is easy to use for the verification of the shear resistance, but requires an iterative process to calculate the shear capacity of sections in the presence of axial forces. For this reason, the final draft of the new version of Eurocode 2 also provides an alternative non-iterative formulation (Linear Approach) to calculate the shear capacity in presence of compressive axial forces, based on the linearisation of the CSCT shear failure criterion and formulated with the same additive structure as in the current Eurocode 2, useful for the most common cases.This paper presents the General Model formulation provided in the next Eurocode 2 for the shear verification of axially loaded members without shear reinforcement, as well as the alternative formulation (linear approach). In addition, the agreement of both formulations with experimental results from an available shear test database on prestressed concrete beams is shown and the consistency of the safety treatment between the two formulations is also discussed.
- Open Access
- 23 January 2023
- Published by CINTER in Hormigón y Acero
- Vol. 75 (302-303) , 119-136
Towards the Development of a Formulation for Obtaining the Shear Strength of Concrete Composite Beams
In the design and assessment of precast concrete beams with a slab cast on top, namely concrete composite beams, engineers still face in practice unsolved shear-related issues, such as the contribution to shear strength of the slab, the concrete strength to be considered in shear formulations or the influence of the interface between concretes in the shear behaviour. In the present research, 69 shear tests were performed on monolithic and composite beams, with rectangular or T-shaped cross-section, with or without transverse reinforcement and with different concrete qualities, to experimentally analyse the issues mentioned above. The study of the shear transfer mechanisms at failure led to formulating a model for explaining the observed results. Based on this model, a shear strength predictive formulation for concrete composite beams with web reinforcement has been developed, which has been verified with the experimental results from this research and 24 additional tests from the literature. This formulation provides accurate predictions compared to the shear strength formulations of current codes EC2, MC-10 and ACI 318-19. The proposed model lays the foundations for the future development of a user-friendly formulation for calculating the shear strength of concrete composite beams.
- 23 January 2023
- Published by CINTER in Hormigón y Acero
- Vol. 75 (302-303) , 119-136
Open AccessTowards the Development of a Formulation for Obtaining the Shear Strength of Concrete Composite Beams
In the design and assessment of precast concrete beams with a slab cast on top, namely concrete composite beams, engineers still face in practice unsolved shear-related issues, such as the contribution to shear strength of the slab, the concrete strength to be considered in shear formulations or the influence of the interface between concretes in the shear behaviour. In the present research, 69 shear tests were performed on monolithic and composite beams, with rectangular or T-shaped cross-section, with or without transverse reinforcement and with different concrete qualities, to experimentally analyse the issues mentioned above. The study of the shear transfer mechanisms at failure led to formulating a model for explaining the observed results. Based on this model, a shear strength predictive formulation for concrete composite beams with web reinforcement has been developed, which has been verified with the experimental results from this research and 24 additional tests from the literature. This formulation provides accurate predictions compared to the shear strength formulations of current codes EC2, MC-10 and ACI 318-19. The proposed model lays the foundations for the future development of a user-friendly formulation for calculating the shear strength of concrete composite beams.
- 16 August 2013
- Published by Civil-Comp, Ltd.
- Vol. 102
A Simplified Method to Design Reinforced Concrete Membrane Elements
- 16 August 2013
- Published by Civil-Comp, Ltd.
- Vol. 102
A Simplified Method to Design Reinforced Concrete Membrane Elements
- 1 July 2013
- Published by Elsevier in Engineering Structures
- Vol. 52, 257-272
A theoretical model for including the effect of monotonic shear loading in the analysis of reinforced concrete beams
- 1 July 2013
- Published by Elsevier in Engineering Structures
- Vol. 52, 257-272
A theoretical model for including the effect of monotonic shear loading in the analysis of reinforced concrete beams
- 1 April 2013
- Published by Elsevier in Engineering Structures
- Vol. 49, 329-344
A simplified method to predict the ultimate shear stress of reinforced concrete membrane elements
- 1 April 2013
- Published by Elsevier in Engineering Structures
- Vol. 49, 329-344
A simplified method to predict the ultimate shear stress of reinforced concrete membrane elements
- 1 March 2013
- Published by Elsevier in Engineering Structures
- Vol. 48, 220-232
Experimental research on high strength concrete slender columns subjected to compression and uniaxial bending with unequal eccentricities at the ends
- 1 March 2013
- Published by Elsevier in Engineering Structures
- Vol. 48, 220-232
Experimental research on high strength concrete slender columns subjected to compression and uniaxial bending with unequal eccentricities at the ends
- 1 July 2012
- Published by Elsevier in Engineering Structures
- Vol. 40, 398-412
Ductility of slender reinforced concrete columns under monotonic flexure and constant axial load
- 1 July 2012
- Published by Elsevier in Engineering Structures
- Vol. 40, 398-412
Ductility of slender reinforced concrete columns under monotonic flexure and constant axial load
- 1 July 2012
- Published by Elsevier in Engineering Structures
- Vol. 40, 254-266
Behavior of RC slender columns under unequal eccentricities and skew angle loads at the ends
- 1 July 2012
- Published by Elsevier in Engineering Structures
- Vol. 40, 254-266
Behavior of RC slender columns under unequal eccentricities and skew angle loads at the ends
- 1 December 2009
- Published by Elsevier in Engineering Structures
- Vol. 31 (12) , 3065-3071
A numerical method to design reinforced concrete sections subjected to axial forces and biaxial bending based on ultimate strain limits
- 1 December 2009
- Published by Elsevier in Engineering Structures
- Vol. 31 (12) , 3065-3071
A numerical method to design reinforced concrete sections subjected to axial forces and biaxial bending based on ultimate strain limits