Karthik Balasubramanian
Karthik Balasubramanian has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Thanikanti Sudhakar Babu
Chaitanya Bharathi Institute of Technology
5 shared publications - Dalia Yousri
Department of Electrical, Communications, College of Engineering, United Arab Emirates University, Al Ain, UAE
2 shared publications - Sudhakar Natarajan
School of Electrical Engineering, Vellore Institute of Technology, Vellore, Tamil Nadu, India
2 shared publications - Umashankar Subramaniam
Prince Sultan University
2 shared publications - Ahmed Fathy
Department of Electrical Engineering, College of Engineering, Jouf University, Sakaka 72388, Saudi Arabia
1 shared publication - Ahmed Osama
Electrical Engineering Department, Faculty of Engineering, Fayoum University, Fayoum 63514, Egypt
1 shared publication
Latest Publications
- 5 April 2023
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 51 (11) , 1051-1074
PV-Fed Micro-Inverter with Battery Storage for Single Phase Grid Applications
Nowadays, micro-inverters are trending due to the latest features consisting in PV technology. However, integration of a high-gain boost converter is needed to improve the low rating output voltage of PV modules to meet the load demand. A high-gain converter with less component count is required for grid integration systems. This article proposes a new quasi z-source based high-gain DC–DC converter with reduced components, cost, and size. The proposed converter is integrated with the micro-inverter for single-phase grid applications along with battery storage. A radial basis function network algorithm is utilized for a PV system to track the maximum power point, an efficient hysteresis current controller is applied for the full-bridge inverter for the robust regulation of current and the energy can be stored through the bidirectional dc/dc converter to supply the power to grid when the sources are drained conditions. An efficient PV extraction, low total harmonic distortion and achieves unity power factor which is perfectly suitable for grid-connected PV systems. The operating modes in every aspect and analysis of the proposed configuration have been investigated in detail. The implementation of control strategies is discussed in detail. Simulation of the proposed micro-inverter is designed in MATLAB/SIMULINK tool to validate the efficiency under variable operating conditions. With the successful implementation of the proposed technique, total harmonic distortion is reduced to 2.05% and efficiency is enhance to the 98%.
- 5 April 2023
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 51 (11) , 1051-1074
PV-Fed Micro-Inverter with Battery Storage for Single Phase Grid Applications
Nowadays, micro-inverters are trending due to the latest features consisting in PV technology. However, integration of a high-gain boost converter is needed to improve the low rating output voltage of PV modules to meet the load demand. A high-gain converter with less component count is required for grid integration systems. This article proposes a new quasi z-source based high-gain DC–DC converter with reduced components, cost, and size. The proposed converter is integrated with the micro-inverter for single-phase grid applications along with battery storage. A radial basis function network algorithm is utilized for a PV system to track the maximum power point, an efficient hysteresis current controller is applied for the full-bridge inverter for the robust regulation of current and the energy can be stored through the bidirectional dc/dc converter to supply the power to grid when the sources are drained conditions. An efficient PV extraction, low total harmonic distortion and achieves unity power factor which is perfectly suitable for grid-connected PV systems. The operating modes in every aspect and analysis of the proposed configuration have been investigated in detail. The implementation of control strategies is discussed in detail. Simulation of the proposed micro-inverter is designed in MATLAB/SIMULINK tool to validate the efficiency under variable operating conditions. With the successful implementation of the proposed technique, total harmonic distortion is reduced to 2.05% and efficiency is enhance to the 98%.
- 1 December 2020
- Published by Elsevier in Renewable Energy Focus
- Vol. 35, 84-96
A novel review on optimization techniques used in wind farm modelling
- 1 December 2020
- Published by Elsevier in Renewable Energy Focus
- Vol. 35, 84-96
A novel review on optimization techniques used in wind farm modelling
- Open Access
- 24 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 159931-159946
Multi-Objective Grey Wolf Optimizer for Optimal Design of Switching Matrix for Shaded PV array Dynamic Reconfiguration
One of the worst negative phenomena faced by photovoltaic (PV) array is the operation under the shadow phenomenon, which significantly affects the generated power. Multiple local maximum power point (MPP) and unique global MPP are generated from the shaded array. Therefore, regular dispersion of the shadow falling on the PV array surface is a vital issue to extract the GMP via reconfiguration of the shaded modules in the array. This article proposes a recent approach based on Multi-objective grey wolf optimizer (MOGWO) to reconfigure the shaded PV array optimally. The main objective of the proposed MOGWO is providing the optimal structure for the switching matrix to minimize the row current difference and maximize the output power. The benefits of the proposed strategy is performing a dynamic reconfiguration process which closes to the reality. The proposed method is validated across $9 \times 9$ PV array with six shade patterns. MOGWO schemes results are compared with TCT and modified SuDoKu based on several statistical metrics. The comparison reveals the superiority of MOGWO in tackling the multi-peak issue in the P-V characteristics with harvesting the highest power levels.- 24 August 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 159931-159946
Open AccessMulti-Objective Grey Wolf Optimizer for Optimal Design of Switching Matrix for Shaded PV array Dynamic Reconfiguration
One of the worst negative phenomena faced by photovoltaic (PV) array is the operation under the shadow phenomenon, which significantly affects the generated power. Multiple local maximum power point (MPP) and unique global MPP are generated from the shaded array. Therefore, regular dispersion of the shadow falling on the PV array surface is a vital issue to extract the GMP via reconfiguration of the shaded modules in the array. This article proposes a recent approach based on Multi-objective grey wolf optimizer (MOGWO) to reconfigure the shaded PV array optimally. The main objective of the proposed MOGWO is providing the optimal structure for the switching matrix to minimize the row current difference and maximize the output power. The benefits of the proposed strategy is performing a dynamic reconfiguration process which closes to the reality. The proposed method is validated across $9 \times 9$ PV array with six shade patterns. MOGWO schemes results are compared with TCT and modified SuDoKu based on several statistical metrics. The comparison reveals the superiority of MOGWO in tackling the multi-peak issue in the P-V characteristics with harvesting the highest power levels. - Open Access
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 109608-109624
Photovoltaic Array Reconfiguration System for Maximizing the Harvested Power Using Population-Based Algorithms
Massive infiltration of photovoltaic (PV) systems into electric supply networks creates numerous challenges in the present era, as the PV systems become an alternative to non-renewable energy resources. Partial shading, nevertheless, is an essential problem which affects the productivity and life of PV plants. PV reconfiguration is known as a powerful technique to resolve this effect. It is achieved by rearranging the PV modules according to their temperature and levels of shade. Therefore, in this paper, we have utilized three simple population-based optimization algorithms that are known as the flow regime algorithm (FRA), the social mimic optimization algorithm (SMO), and the Rao optimization algorithm to dynamically restructure the PV array. The effectiveness of the proposed algorithms is evaluated using several metrics such as fill factor, mismatch losses, percentage of power loss, and percentage of power enhancement. Besides, the results obtained are compared with a regular total-cross-tied (TCT) connection and recently published techniques such as the competence square (CS) and genetic algorithm (GA). Furthermore, to demonstrate the suitability of proposed approaches in real-time implementation, real-time irradiation data of a particular location are considered and fed into the proposed algorithms for effective shade dispersion. After successful shade dispersion, the total energy generated using the three proposed algorithms is calculated and compared with the TCT reconfigured system for one year. The presented energy calculations and revenue generation confirm that the power produced by the proposed FRA technique is 13% higher than that generated by the TCT configuration. Furthermore, the presented PV characteristics show a reduced number of multiple peaks in the system. Thus, the proposed FRA technique can be endorsed as a technique that is superior to other existing methods.
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 109608-109624
Open AccessPhotovoltaic Array Reconfiguration System for Maximizing the Harvested Power Using Population-Based Algorithms
Massive infiltration of photovoltaic (PV) systems into electric supply networks creates numerous challenges in the present era, as the PV systems become an alternative to non-renewable energy resources. Partial shading, nevertheless, is an essential problem which affects the productivity and life of PV plants. PV reconfiguration is known as a powerful technique to resolve this effect. It is achieved by rearranging the PV modules according to their temperature and levels of shade. Therefore, in this paper, we have utilized three simple population-based optimization algorithms that are known as the flow regime algorithm (FRA), the social mimic optimization algorithm (SMO), and the Rao optimization algorithm to dynamically restructure the PV array. The effectiveness of the proposed algorithms is evaluated using several metrics such as fill factor, mismatch losses, percentage of power loss, and percentage of power enhancement. Besides, the results obtained are compared with a regular total-cross-tied (TCT) connection and recently published techniques such as the competence square (CS) and genetic algorithm (GA). Furthermore, to demonstrate the suitability of proposed approaches in real-time implementation, real-time irradiation data of a particular location are considered and fed into the proposed algorithms for effective shade dispersion. After successful shade dispersion, the total energy generated using the three proposed algorithms is calculated and compared with the TCT reconfigured system for one year. The presented energy calculations and revenue generation confirm that the power produced by the proposed FRA technique is 13% higher than that generated by the TCT configuration. Furthermore, the presented PV characteristics show a reduced number of multiple peaks in the system. Thus, the proposed FRA technique can be endorsed as a technique that is superior to other existing methods.
- Open Access
- 24 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 2564-2577
A State-of-the-Art Review on Conducted Electromagnetic Interference in Non-Isolated DC to DC Converters
One of the most challenging and interesting field in power electronics is the ability to mitigate the Electromagnetic Interference (EMI). A natural source of EMI includes the atmospheric discharge/charge phenomena and extra-terrestrial radiation. Man-made source of EMI are line radiation, auto ignition, radio frequency interference and power lines. Suppression of EMI and enhancing the Electro Magnetic Compatibility (EMC) has become essential in high frequency power electronic converters. This review article is a one stop solution for new researchers and practitioners to understand about the effects of EMI and its suppression techniques in detail.
- 24 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 2564-2577
Open AccessA State-of-the-Art Review on Conducted Electromagnetic Interference in Non-Isolated DC to DC Converters
One of the most challenging and interesting field in power electronics is the ability to mitigate the Electromagnetic Interference (EMI). A natural source of EMI includes the atmospheric discharge/charge phenomena and extra-terrestrial radiation. Man-made source of EMI are line radiation, auto ignition, radio frequency interference and power lines. Suppression of EMI and enhancing the Electro Magnetic Compatibility (EMC) has become essential in high frequency power electronic converters. This review article is a one stop solution for new researchers and practitioners to understand about the effects of EMI and its suppression techniques in detail.