Christian Brand
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christian Brand has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Michael Horn-Von Hoegen
Faculty of Physics, University of Duisburg-Essen 1 , 47057 Duisburg
9 shared publications - Björn Sothmann
Universität Duisburg-Essen
4 shared publications - Jonas D. Fortmann
Faculty of Physics, University of Duisburg-Essen 1 , 47057 Duisburg
4 shared publications Ralf Schützhold
Institute of Theoretical Physics, Dresden University of Technology, 01062 Dresden, Germany
4 shared publications- Alfred Hucht
Faculty of Physics, University of Duisburg-Essen, 47057 Duisburg, Germany
3 shared publications - Frank-Joachim Meyer zu Heringdorf
University of Duisburg-Essen
3 shared publications
Latest Publications
- 23 October 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (17)
Thermal boundary conductance under large temperature discontinuities of ultrathin Pb(111) films on Si(111)
Heat transfer is a critical aspect of modern electronics, and a deeper understanding of the underlying physics is essential for building faster, smaller, and more powerful devices with improved performance and efficiency. In such nanoscale structures, the heat transfer between two materials is limited by the finite thermal boundary conductance across their interface. Using ultrafast electron diffraction under grazing incidence we investigated the heat transfer from ultrathin epitaxial Pb films to an Si(111) substrate under strong nonequilibrium conditions. Upon applying an intense femtosecond laser pulse, the 5–7 ML thin Pb film undergoes rapid heating by 10–120 K while the Si substrate remains cold at ≈10 K. At such large temperature discontinuities, a significantly faster cooling is observed for more strongly excited Pb films. The decrease in the corresponding cooling time constant is explained by variations in thermal boundary conductance, interpreted within the framework of the diffuse mismatch model. The thermal boundary conductance is reduced by more than a factor of three in comparison with Pb films grown on H-terminated substrates, underscoring the importance of substrate, heterofilm, and interface morphologies.
- 23 October 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (17)
Thermal boundary conductance under large temperature discontinuities of ultrathin Pb(111) films on Si(111)
Heat transfer is a critical aspect of modern electronics, and a deeper understanding of the underlying physics is essential for building faster, smaller, and more powerful devices with improved performance and efficiency. In such nanoscale structures, the heat transfer between two materials is limited by the finite thermal boundary conductance across their interface. Using ultrafast electron diffraction under grazing incidence we investigated the heat transfer from ultrathin epitaxial Pb films to an Si(111) substrate under strong nonequilibrium conditions. Upon applying an intense femtosecond laser pulse, the 5–7 ML thin Pb film undergoes rapid heating by 10–120 K while the Si substrate remains cold at ≈10 K. At such large temperature discontinuities, a significantly faster cooling is observed for more strongly excited Pb films. The decrease in the corresponding cooling time constant is explained by variations in thermal boundary conductance, interpreted within the framework of the diffuse mismatch model. The thermal boundary conductance is reduced by more than a factor of three in comparison with Pb films grown on H-terminated substrates, underscoring the importance of substrate, heterofilm, and interface morphologies.
- Open Access
- 17 June 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (24) , 246202
Kibble-Zurek Dynamics in the Anisotropic Ising Model of the Si(001) Surface
As a simplified description of the nonequilibrium dynamics of buckled dimers on the Si(001) surface, we consider the anisotropic two-dimensional (2D) Ising model and study the freezing of spatial correlations during a cooling quench across the critical point. Depending on the cooling rate, we observe a crossover from one-dimensional (1D) to 2D behavior. For rapid cooling, we find effectively 1D behavior in the strongly coupled direction, for which we provide an exact analytic solution of the nonequilibrium dynamics. For slower cooling rates, we start to see 2D behavior where our numerical simulations show an approach to the usual Kibble–Zurek scaling in 2D. Published by the American Physical Society 2025
- 17 June 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 134 (24) , 246202
Open AccessKibble-Zurek Dynamics in the Anisotropic Ising Model of the Si(001) Surface
As a simplified description of the nonequilibrium dynamics of buckled dimers on the Si(001) surface, we consider the anisotropic two-dimensional (2D) Ising model and study the freezing of spatial correlations during a cooling quench across the critical point. Depending on the cooling rate, we observe a crossover from one-dimensional (1D) to 2D behavior. For rapid cooling, we find effectively 1D behavior in the strongly coupled direction, for which we provide an exact analytic solution of the nonequilibrium dynamics. For slower cooling rates, we start to see 2D behavior where our numerical simulations show an approach to the usual Kibble–Zurek scaling in 2D. Published by the American Physical Society 2025
- Open Access
- 1 March 2025
- Published by AIP Publishing in Structural Dynamics
- Vol. 12 (2) , 024301
Implementation and performance of a fiber-coupled CMOS camera in an ultrafast reflective high-energy electron diffraction experiment
The implementation of a monolithic fiber-optically coupled CMOS-based TemCam-XF416 camera into our ultra-high vacuum (UHV) ultrafast reflection high-energy electron diffraction setup is reported. A combination of a pumpable gate valve and a self-built cooling collar allows UHV conditions to be reached without the need to remove the heat-sensitive device. The water-cooled collar is mounted to the camera housing and prevents heating of the camera upon bakeout of the UHV chamber. The TemCam possesses an one order of magnitude higher spatial resolution, which provides 30% higher resolution in reciprocal space than the previously used microchannel plate detector. The low background intensity and the four times larger dynamic range enable analysis of the diffuse intensity of the diffraction pattern like Kikuchi lines and bands. A key advantage over the previous MCP detector is the complete absence of the blooming effect, which enables the quantitative spot profile analysis of the diffraction spots. The inherent light sensitivity in an optical pump experiment can be overcome by subtracting a pump image without a probe, using photons with hν<1.12 eV (indirect bandgap of silicon), or shielding any stray light.
- 1 March 2025
- Published by AIP Publishing in Structural Dynamics
- Vol. 12 (2) , 024301
Open AccessImplementation and performance of a fiber-coupled CMOS camera in an ultrafast reflective high-energy electron diffraction experiment
The implementation of a monolithic fiber-optically coupled CMOS-based TemCam-XF416 camera into our ultra-high vacuum (UHV) ultrafast reflection high-energy electron diffraction setup is reported. A combination of a pumpable gate valve and a self-built cooling collar allows UHV conditions to be reached without the need to remove the heat-sensitive device. The water-cooled collar is mounted to the camera housing and prevents heating of the camera upon bakeout of the UHV chamber. The TemCam possesses an one order of magnitude higher spatial resolution, which provides 30% higher resolution in reciprocal space than the previously used microchannel plate detector. The low background intensity and the four times larger dynamic range enable analysis of the diffuse intensity of the diffraction pattern like Kikuchi lines and bands. A key advantage over the previous MCP detector is the complete absence of the blooming effect, which enables the quantitative spot profile analysis of the diffraction spots. The inherent light sensitivity in an optical pump experiment can be overcome by subtracting a pump image without a probe, using photons with hν<1.12 eV (indirect bandgap of silicon), or shielding any stray light.
- 10 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (13) , 134104
Critical behavior of the dimerized Si(001) surface: Continuous order-disorder phase transition in the two-dimensional Ising universality class
The critical behavior of the order-disorder phase transition in the buckled dimer structure of the Si(001) surface is investigated both theoretically by means of first-principles calculations and experimentally by spot profile analysis low-energy electron diffraction (SPA-LEED). We use density functional theory (DFT) with three different functionals commonly used for Si to determine the coupling constants of an effective lattice Hamiltonian describing the dimer interactions. Experimentally, the phase transition from the low-temperature - to the high-temperature -reconstructed surface is followed through the intensity and width of the superstructure spots within the temperature range . Near the critical temperature , we observe universal critical behavior of spot intensities and correlation lengths, which falls into the universality class of the two-dimensional (2D) Ising model. From the ratio of correlation lengths along and across the dimer rows we determine effective nearest-neighbor couplings of an anisotropic 2D Ising model, and . We find that the experimentally determined coupling constants of the Ising model can be reconciled with those of the more complex lattice Hamiltonian from DFT when the critical behavior is of primary interest. The anisotropy of the interactions derived from the experimental data via the 2D Ising model is best matched by DFT calculations using the PBEsol functional. The trends in the calculated anisotropy are consistent with the surface stress anisotropy predicted by the DFT functionals, pointing towards the role of surface stress reduction as a driving force for establishing the -reconstructed ground state.- 10 April 2024
- Published by American Physical Society (APS) in Physical Review B
- Vol. 109 (13) , 134104
Critical behavior of the dimerized Si(001) surface: Continuous order-disorder phase transition in the two-dimensional Ising universality class
The critical behavior of the order-disorder phase transition in the buckled dimer structure of the Si(001) surface is investigated both theoretically by means of first-principles calculations and experimentally by spot profile analysis low-energy electron diffraction (SPA-LEED). We use density functional theory (DFT) with three different functionals commonly used for Si to determine the coupling constants of an effective lattice Hamiltonian describing the dimer interactions. Experimentally, the phase transition from the low-temperature - to the high-temperature -reconstructed surface is followed through the intensity and width of the superstructure spots within the temperature range . Near the critical temperature , we observe universal critical behavior of spot intensities and correlation lengths, which falls into the universality class of the two-dimensional (2D) Ising model. From the ratio of correlation lengths along and across the dimer rows we determine effective nearest-neighbor couplings of an anisotropic 2D Ising model, and . We find that the experimentally determined coupling constants of the Ising model can be reconciled with those of the more complex lattice Hamiltonian from DFT when the critical behavior is of primary interest. The anisotropy of the interactions derived from the experimental data via the 2D Ising model is best matched by DFT calculations using the PBEsol functional. The trends in the calculated anisotropy are consistent with the surface stress anisotropy predicted by the DFT functionals, pointing towards the role of surface stress reduction as a driving force for establishing the -reconstructed ground state.- Open Access
Critical behavior of the dimerized Si(001) surface: Continuous order-disorder phase transition in the two-dimensional Ising universality class
The critical behavior of the order-disorder phase transition in the buckled dimer structure of the Si(001) surface is investigated both theoretically by means of first-principles calculations and experimentally by spot profile analysis low-energy electron diffraction (SPA-LEED). We use density functional theory (DFT) with three different functionals commonly used for Si to determine the coupling constants of an effective lattice Hamiltonian describing the dimer interactions. Experimentally, the phase transition from the low-temperature $c(4 {\times} 2)$- to the high-temperature $p(2 {\times} 1)$-reconstructed surface is followed through the intensity and width of the superstructure spots within the temperature range 78-400 K. Near the critical temperature $T_c = 190.6\,\mathrm{K}$, we observe universal critical behavior of spot intensities and correlation lengths which falls into the universality class of the two-dimensional (2D) Ising model. From the ratio of correlation lengths along and across the dimer rows we determine effective nearest-neighbor couplings of an anisotropic 2D Ising model, $J_\parallel = (-24.9 \pm 0.9_\mathrm{stat} \pm 1.3_\mathrm{sys})\,\mathrm{meV}$ and $J_\perp = (-0.8 \pm 0.1_\mathrm{stat})\,\mathrm{meV}$. We find that the experimentally determined coupling constants of the Ising model can be reconciled with those of the more complex lattice Hamiltonian from DFT when the critical behavior is of primary interest. The anisotropy of the interactions derived from the experimental data via the 2D Ising model is best matched by DFT calculations using the PBEsol functional. The trends in the calculated anisotropy are consistent with the surface stress anisotropy predicted by the DFT functionals, pointing towards the role of surface stress reduction as a driving force for establishing the $c(4 {\times} 2)$-reconstructed ground state.Open AccessCritical behavior of the dimerized Si(001) surface: Continuous order-disorder phase transition in the two-dimensional Ising universality class
The critical behavior of the order-disorder phase transition in the buckled dimer structure of the Si(001) surface is investigated both theoretically by means of first-principles calculations and experimentally by spot profile analysis low-energy electron diffraction (SPA-LEED). We use density functional theory (DFT) with three different functionals commonly used for Si to determine the coupling constants of an effective lattice Hamiltonian describing the dimer interactions. Experimentally, the phase transition from the low-temperature $c(4 {\times} 2)$- to the high-temperature $p(2 {\times} 1)$-reconstructed surface is followed through the intensity and width of the superstructure spots within the temperature range 78-400 K. Near the critical temperature $T_c = 190.6\,\mathrm{K}$, we observe universal critical behavior of spot intensities and correlation lengths which falls into the universality class of the two-dimensional (2D) Ising model. From the ratio of correlation lengths along and across the dimer rows we determine effective nearest-neighbor couplings of an anisotropic 2D Ising model, $J_\parallel = (-24.9 \pm 0.9_\mathrm{stat} \pm 1.3_\mathrm{sys})\,\mathrm{meV}$ and $J_\perp = (-0.8 \pm 0.1_\mathrm{stat})\,\mathrm{meV}$. We find that the experimentally determined coupling constants of the Ising model can be reconciled with those of the more complex lattice Hamiltonian from DFT when the critical behavior is of primary interest. The anisotropy of the interactions derived from the experimental data via the 2D Ising model is best matched by DFT calculations using the PBEsol functional. The trends in the calculated anisotropy are consistent with the surface stress anisotropy predicted by the DFT functionals, pointing towards the role of surface stress reduction as a driving force for establishing the $c(4 {\times} 2)$-reconstructed ground state. - 7 September 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (18) , 17946-17955
Interplay of Kinetic Limitations and Disintegration: Selective Growth of Hexagonal Boron Nitride and Borophene Monolayers on Metal Substrates
The CVD growth of bielemental 2D-materials by using molecular precursors involves complex formation kinetics taking place at the surface and sometimes also subsurface regions of the substrate. Competing microscopic processes fundamentally limit the parameter space for optimal growth of the desired material. Kinetic limitations for diffusion and nucleation cause a high density of small domains and grain boundaries. These are usually overcome by increasing the growth temperature and decreasing the growth rate. In contrast, the nature of molecular precursors with limited thermal stability can result in dissociation and preferential desorption, leading to an undesired or ill-defined composition of the 2D-material. Here we demonstrate these constraints in a combined low-energy electron diffraction and low-energy electron microscopy study by examining the selective formation of single-layer hexagonal boron nitride (hBN) and borophene on Ir(111) using a borazine precursor. We derive a temperature-pressure phase diagram and apply classical nucleation theory to describe our results. By considering the competing processes, we find an optimum growth temperature for hBN of 950 °C. At lower temperatures, the hBN island density is increased, while at higher temperatures the precursor disintegrates and borophene is formed. Our results introduce an additional aspect that must be considered in any high-temperature growth of bielemental 2D-materials from single molecular precursors.
- 7 September 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (18) , 17946-17955
Interplay of Kinetic Limitations and Disintegration: Selective Growth of Hexagonal Boron Nitride and Borophene Monolayers on Metal Substrates
The CVD growth of bielemental 2D-materials by using molecular precursors involves complex formation kinetics taking place at the surface and sometimes also subsurface regions of the substrate. Competing microscopic processes fundamentally limit the parameter space for optimal growth of the desired material. Kinetic limitations for diffusion and nucleation cause a high density of small domains and grain boundaries. These are usually overcome by increasing the growth temperature and decreasing the growth rate. In contrast, the nature of molecular precursors with limited thermal stability can result in dissociation and preferential desorption, leading to an undesired or ill-defined composition of the 2D-material. Here we demonstrate these constraints in a combined low-energy electron diffraction and low-energy electron microscopy study by examining the selective formation of single-layer hexagonal boron nitride (hBN) and borophene on Ir(111) using a borazine precursor. We derive a temperature-pressure phase diagram and apply classical nucleation theory to describe our results. By considering the competing processes, we find an optimum growth temperature for hBN of 950 °C. At lower temperatures, the hBN island density is increased, while at higher temperatures the precursor disintegrates and borophene is formed. Our results introduce an additional aspect that must be considered in any high-temperature growth of bielemental 2D-materials from single molecular precursors.
- 23 March 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 130 (12) , 126203
Dimer Coupling Energies of the Si(001) Surface
The coupling energies between the buckled dimers of the Si(001) surface were determined through analysis of the anisotropic critical behavior of its order-disorder phase transition. Spot profiles in high-resolution low-energy electron diffraction as a function of temperature were analyzed within the framework of the anisotropic two-dimensional Ising model. The validity of this approach is justified by the large ratio of correlation lengths, of the fluctuating domains above the critical temperature . We obtain effective couplings along the dimer rows and across the dimer rows, i.e., antiferromagneticlike coupling of the dimers with symmetry.- 23 March 2023
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 130 (12) , 126203
Dimer Coupling Energies of the Si(001) Surface
The coupling energies between the buckled dimers of the Si(001) surface were determined through analysis of the anisotropic critical behavior of its order-disorder phase transition. Spot profiles in high-resolution low-energy electron diffraction as a function of temperature were analyzed within the framework of the anisotropic two-dimensional Ising model. The validity of this approach is justified by the large ratio of correlation lengths, of the fluctuating domains above the critical temperature . We obtain effective couplings along the dimer rows and across the dimer rows, i.e., antiferromagneticlike coupling of the dimers with symmetry.- Open Access
Dimer Coupling Energies of the Si(001) Surface
The coupling energies between the buckled dimers of the Si(001) surface were determined through analysis of the anisotropic critical behavior of its order-disorder phase transition. Spot profiles in high-resolution low-energy electron diffraction as a function of temperature were analyzed within the framework of the anisotropic two-dimensional Ising model. The validity of this approach is justified by the large ratio of correlation lengths, $ξ_\parallel^+/ξ_\perp^+ = 5.2$ of the fluctuating $c(4 {\times} 2)$ domains above the critical temperature $T_\mathrm{c} = (190.6 \pm 10)$ K. We obtain effective couplings $J_\parallel = (-24.9 \pm 1.3)$ meV along the dimer rows and $J_\perp = (-0.8 \pm 0.1)$ meV across the dimer rows, i.e., antiferromagnetic-like coupling of the dimers with $c(4 {\times} 2)$ symmetry.Open AccessDimer Coupling Energies of the Si(001) Surface
The coupling energies between the buckled dimers of the Si(001) surface were determined through analysis of the anisotropic critical behavior of its order-disorder phase transition. Spot profiles in high-resolution low-energy electron diffraction as a function of temperature were analyzed within the framework of the anisotropic two-dimensional Ising model. The validity of this approach is justified by the large ratio of correlation lengths, $ξ_\parallel^+/ξ_\perp^+ = 5.2$ of the fluctuating $c(4 {\times} 2)$ domains above the critical temperature $T_\mathrm{c} = (190.6 \pm 10)$ K. We obtain effective couplings $J_\parallel = (-24.9 \pm 1.3)$ meV along the dimer rows and $J_\perp = (-0.8 \pm 0.1)$ meV across the dimer rows, i.e., antiferromagnetic-like coupling of the dimers with $c(4 {\times} 2)$ symmetry. - 14 June 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (24) , 241902
Non-conventional bell-shaped diffuse scattering in low-energy electron diffraction from high-quality epitaxial 2D-materials
A broad, bell-shaped intensity component is observed in low-energy electron diffraction from high-quality epitaxial 2D-systems. Three 2D-systems, graphene on Ir(111), graphene on SiC(0001), and hexagonal boron nitride on Ir(111), have been prepared in situ under ultra-high vacuum conditions. In all three systems—independent of substrate material—similar strong diffuse intensity is observed, exhibiting a width as large as 50% of the Brillouin zone and an integrated intensity more than 10 times the intensity of the Bragg spots. The presented experimental results provide evidence for a common origin of such diffuse diffraction intensity in different atomically thin 2D-materials.
- 14 June 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (24) , 241902
Non-conventional bell-shaped diffuse scattering in low-energy electron diffraction from high-quality epitaxial 2D-materials
A broad, bell-shaped intensity component is observed in low-energy electron diffraction from high-quality epitaxial 2D-systems. Three 2D-systems, graphene on Ir(111), graphene on SiC(0001), and hexagonal boron nitride on Ir(111), have been prepared in situ under ultra-high vacuum conditions. In all three systems—independent of substrate material—similar strong diffuse intensity is observed, exhibiting a width as large as 50% of the Brillouin zone and an integrated intensity more than 10 times the intensity of the Bragg spots. The presented experimental results provide evidence for a common origin of such diffuse diffraction intensity in different atomically thin 2D-materials.
- 24 March 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (4) , 7421-7429
Segregation-Enhanced Epitaxy of Borophene on Ir(111) by Thermal Decomposition of Borazine
Like other 2D materials, the boron-based borophene exhibits interesting structural and electronic properties. While borophene is typically prepared by molecular beam epitaxy, we report here on an alternative way of synthesizing large single-phase borophene domains by segregation-enhanced epitaxy. X-ray photoelectron spectroscopy shows that borazine dosing at 1100 °C onto Ir(111) yields a boron-rich surface without traces of nitrogen. At high temperatures, the borazine thermally decomposes, nitrogen desorbs, and boron diffuses into the substrate. Using time-of-flight secondary ion mass spectrometry, we show that during cooldown the subsurface boron segregates back to the surface where it forms borophene. In this case, electron diffraction reveals a (6 × 2) reconstructed borophene χ6-polymorph, and scanning tunneling spectroscopy suggests a Dirac-like behavior. Studying the kinetics of borophene formation in low energy electron microscopy shows that surface steps are bunched during the borophene formation, resulting in elongated and extended borophene domains with exceptional structural order.
- 24 March 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (4) , 7421-7429
Segregation-Enhanced Epitaxy of Borophene on Ir(111) by Thermal Decomposition of Borazine
Like other 2D materials, the boron-based borophene exhibits interesting structural and electronic properties. While borophene is typically prepared by molecular beam epitaxy, we report here on an alternative way of synthesizing large single-phase borophene domains by segregation-enhanced epitaxy. X-ray photoelectron spectroscopy shows that borazine dosing at 1100 °C onto Ir(111) yields a boron-rich surface without traces of nitrogen. At high temperatures, the borazine thermally decomposes, nitrogen desorbs, and boron diffuses into the substrate. Using time-of-flight secondary ion mass spectrometry, we show that during cooldown the subsurface boron segregates back to the surface where it forms borophene. In this case, electron diffraction reveals a (6 × 2) reconstructed borophene χ6-polymorph, and scanning tunneling spectroscopy suggests a Dirac-like behavior. Studying the kinetics of borophene formation in low energy electron microscopy shows that surface steps are bunched during the borophene formation, resulting in elongated and extended borophene domains with exceptional structural order.