MHMichael Horn-Von Hoegen

Michael Horn-Von Hoegen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michael Horn-Von Hoegen has a total of 194 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A two-step chemical vapor deposition process for the synthesis of an Ir(111)/Borophene/2D-hexagonal boron nitride heterostructure by intrinsic segregation

    by Marko A. Kriegel, Karim M. Omambac, Smruti R. Mohanty, Tobias Hartl, Stefan Schulte, Niels Ganser, Pascal Dreher, Alexandra Rödl, Steffen Franzka, Germán Sciaini, et al.

  • Subsurface Carbon Incorporation Controls Graphene Nucleation on Ir(111)

    by Smruti Ranjan Mohanty, Lothar Brendel, Marko Kriegel, Niels Ganser, Frank-Joachim Meyer zu Heringdorf, Michael Horn-Von Hoegen

    The growth of two-dimensional materials by chemical vapor deposition is governed by a complex interplay of adsorption, surface diffusion, and nucleation processes. For growth on transition metal surfaces, dissolution into the bulk adds an additional parameter. Using low-energy electron microscopy, we analyze temperature- and dosing-pressure-dependent nucleation of graphene islands on Ir(111). Depending on dosing conditions, the island nucleation density follows two distinct regimes, described within Venables’ nucleation theory. At low dosing pressure, nucleation is strongly suppressed, the island density is small, and it follows scaling characteristics of initially incomplete condensation. Increasing dosing pressure renders bulk-mediated adatom loss negligible, leading to a higher nucleation density and a strongly reduced scaling exponent. Kinetic Monte Carlo simulations that explicitly consider bulk dissolution reveal a universal, temperature-independent scaling law with a crossover from steep to shallow scaling, reflecting generic nucleation behavior for 2D materials with finite solubility.


  • Open Access

    Directional sensitivity of the A1g phonon in biaxially strained bismuth heterofilms studied by transient white light reflectivity

    by Fabian Thiemann, Maja Penkl, Michael Horn-Von Hoegen

    Strain engineering in epitaxial Bi(111) films on Si(111) enables temperature-tunable phonon frequencies through thermal expansion mismatch. Using in situ low-energy electron diffraction combined with broadband femtosecond transient reflectivity on the same samples, we directly correlate anisotropic lattice parameters with the redshift of the coherent A1g phonon mode. The in-plane lattice parameter remains locked to the Si substrate and is therefore nearly temperature-independent, imposing strong biaxial compressive strain, causing an additional expansion of the Bi lattice along the c-axis. By applying an extended phonon-shift model, we disentangle the contributions of intrinsic thermal expansion, thermal-mismatch strain, and anharmonicity to the phonon softening. The enhanced redshift observed in strained films cannot be accounted for by expansion or mismatch alone; instead, it arises from a strengthened anharmonic term that additionally scales with strain along the c-axis, being insensitive to the in-plane lattice parameter and thereby enabling targeted control of phonon frequencies.

  • Thermal boundary conductance under large temperature discontinuities of ultrathin Pb(111) films on Si(111)

    by Christian Brand, Tobias Witte, Mohammad Tajik, Jonas D. Fortmann, Birk Finke, Herbert Pfnür, Christoph Tegenkamp, Michael Horn-Von Hoegen

    Heat transfer is a critical aspect of modern electronics, and a deeper understanding of the underlying physics is essential for building faster, smaller, and more powerful devices with improved performance and efficiency. In such nanoscale structures, the heat transfer between two materials is limited by the finite thermal boundary conductance across their interface. Using ultrafast electron diffraction under grazing incidence we investigated the heat transfer from ultrathin epitaxial Pb films to an Si(111) substrate under strong nonequilibrium conditions. Upon applying an intense femtosecond laser pulse, the 5–7 ML thin Pb film undergoes rapid heating by 10–120 K while the Si substrate remains cold at ≈10 K. At such large temperature discontinuities, a significantly faster cooling is observed for more strongly excited Pb films. The decrease in the corresponding cooling time constant is explained by variations in thermal boundary conductance, interpreted within the framework of the diffuse mismatch model. The thermal boundary conductance is reduced by more than a factor of three in comparison with Pb films grown on H-terminated substrates, underscoring the importance of substrate, heterofilm, and interface morphologies.

  • Open Access

    Kibble-Zurek Dynamics in the Anisotropic Ising Model of the Si(001) Surface

    by G. Schaller, F. Queisser, S. P. Katoorani, C. Brand, C. Kohlfürst, M. R. Freeman, A. Hucht, P. Kratzer, B. Sothmann, M. Horn-Von Hoegen, et al.

    As a simplified description of the nonequilibrium dynamics of buckled dimers on the Si(001) surface, we consider the anisotropic two-dimensional (2D) Ising model and study the freezing of spatial correlations during a cooling quench across the critical point. Depending on the cooling rate, we observe a crossover from one-dimensional (1D) to 2D behavior. For rapid cooling, we find effectively 1D behavior in the strongly coupled direction, for which we provide an exact analytic solution of the nonequilibrium dynamics. For slower cooling rates, we start to see 2D behavior where our numerical simulations show an approach to the usual Kibble–Zurek scaling in 2D. Published by the American Physical Society 2025


  • Open Access

    Implementation and performance of a fiber-coupled CMOS camera in an ultrafast reflective high-energy electron diffraction experiment

    by Jonas D. Fortmann, Alexander Kaßen, Christian Brand, Thomas Duden, Michael Horn-Von Hoegen

    The implementation of a monolithic fiber-optically coupled CMOS-based TemCam-XF416 camera into our ultra-high vacuum (UHV) ultrafast reflection high-energy electron diffraction setup is reported. A combination of a pumpable gate valve and a self-built cooling collar allows UHV conditions to be reached without the need to remove the heat-sensitive device. The water-cooled collar is mounted to the camera housing and prevents heating of the camera upon bakeout of the UHV chamber. The TemCam possesses an one order of magnitude higher spatial resolution, which provides 30% higher resolution in reciprocal space than the previously used microchannel plate detector. The low background intensity and the four times larger dynamic range enable analysis of the diffuse intensity of the diffraction pattern like Kikuchi lines and bands. A key advantage over the previous MCP detector is the complete absence of the blooming effect, which enables the quantitative spot profile analysis of the diffraction spots. The inherent light sensitivity in an optical pump experiment can be overcome by subtracting a pump image without a probe, using photons with hν<1.12 eV (indirect bandgap of silicon), or shielding any stray light.


  • Open Access

    Implementation and performance of a fiber-coupled CMOS camera in an ultrafast reflective high-energy electron diffraction experiment

    by Jonas D. Fortmann, Alexander Kaßen, Christian Brand, Thomas Duden, Michael Horn-Von Hoegen

    The implementation of a monolithic fiber-optically coupled CMOS-based TemCam-XF416 camera into our ultra-high vacuum (UHV) ultrafast reflection high-energy electron diffraction setup is reported. A combination of a pumpable gate valve and a self-built cooling collar allows UHV conditions to be reached without the need to remove the heat-sensitive device. The water-cooled collar is mounted to the camera housing and prevents heating of the detector upon bake-out of the UHV chamber. The TemCam provides an one order of magnitude higher spatial resolution than the previously used microchannel plate (MCP) based detector (Burle Chevron 3040FM) which enables a 30% higher resolution in reciprocal space. The low background intensity and the 4$\times$ lager dynamic range enables analysis of the diffuse intensity of the diffraction pattern like Kikuchi lines and bands. A key advantage over the previous MCP detector is the complete absence of the blooming effect, which enables the quantitative spot profile analysis of the diffraction spots. The inherent light sensitivity in an optical pump experiment can be overcome by using photons with hν < 1.12 eV, i.e., the indirect band gap of silicon, or by shielding any stray light.

  • Critical behavior of the dimerized Si(001) surface: Continuous order-disorder phase transition in the two-dimensional Ising universality class

    by Christian Brand, Alfred Hucht, Hamid Mehdipour, Giriraj Jnawali, Jonas D. Fortmann, Mohammad Tajik, Rüdiger Hild, Björn Sothmann, Peter Kratzer, Ralf Schützhold, et al.

    The critical behavior of the order-disorder phase transition in the buckled dimer structure of the Si(001) surface is investigated both theoretically by means of first-principles calculations and experimentally by spot profile analysis low-energy electron diffraction (SPA-LEED). We use density functional theory (DFT) with three different functionals commonly used for Si to determine the coupling constants of an effective lattice Hamiltonian describing the dimer interactions. Experimentally, the phase transition from the low-temperature c(4×2)- to the high-temperature p(2×1)-reconstructed surface is followed through the intensity and width of the superstructure spots within the temperature range 78–400K. Near the critical temperature Tc=190.6K, we observe universal critical behavior of spot intensities and correlation lengths, which falls into the universality class of the two-dimensional (2D) Ising model. From the ratio of correlation lengths along and across the dimer rows we determine effective nearest-neighbor couplings of an anisotropic 2D Ising model, J∥=(−24.9±0.9stat±1.3sys)meV and J⊥=(−0.8±0.1stat)meV. We find that the experimentally determined coupling constants of the Ising model can be reconciled with those of the more complex lattice Hamiltonian from DFT when the critical behavior is of primary interest. The anisotropy of the interactions derived from the experimental data via the 2D Ising model is best matched by DFT calculations using the PBEsol functional. The trends in the calculated anisotropy are consistent with the surface stress anisotropy predicted by the DFT functionals, pointing towards the role of surface stress reduction as a driving force for establishing the c(4×2)-reconstructed ground state.


  • Open Access

    Non-Equilibrium Pathways for Excitation of Bulk and Surface Phonons through Anharmonic Coupling

    by C. Brand, V. Tinnemann, A. Hanisch-Blicharski, M. Tajik, J. D. Fortmann, A. Kaßen, F. Thiemann, M. Horn-Von Hoegen

    Upon impulsive optical excitation of solid-state materials, the non-equilibrium flow of energy from the excited electronic system to the lattice degrees of freedom typically happens in a few picoseconds. Here we identified the surface of thin Bi films grown on Si(001) as an additional subsystem which is excited much slower on a 100 ps timescale that is caused by decoupling due to mismatched phonon dispersions relations of bulk and surface. Anharmonic coupling among the phonon systems provides pathways for excitations which exhibits a 1/T-dependence causing a speed-up of surface excitation at higher temperatures. A quantitative justification is provided by phonon Umklapp processes from lattice thermal conductivity of the Bi bulk. Three-temperature model simulations reveal a pronounced non-equilibrium situation up to nanoseconds: initially, the surface is colder than the bulk, that situation is then inverted during cooling and the surface feeds energy back into the bulk phonon system.

  • Open Access

    Momentum space separation of quantum path interferences between photons and surface plasmon polaritons in nonlinear photoemission microscopy

    by Pascal Dreher, David Janoschka, Harald Giessen, Ralf Schützhold, Timothy J. Davis, Michael Horn‐Von Hoegen, Frank‐J. Meyer zu Heringdorf

    Quantum path interferences occur whenever multiple equivalent and coherent transitions result in a common final state. Such interferences strongly modify the probability of a particle to be found in that final state, a key concept of quantum coherent control. When multiple nonlinear and energy‐degenerate transitions occur in a system, the multitude of possible quantum path interferences is hard to disentangle experimentally. Here, we analyze quantum path interferences during the nonlinear emission of electrons from hybrid plasmonic and photonic fields using time‐resolved photoemission electron microscopy. We experimentally distinguish quantum path interferences by exploiting the momentum difference between photons and plasmons and through balancing the relative contributions of their respective fields. Our work provides a fundamental understanding of the nonlinear photon–plasmon–electron interaction. Distinguishing emission processes in momentum space, as introduced here, could allow nano‐optical quantum‐correlations to be studied without destroying the quantum path interferences.