Olha Bashynska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Olha Bashynska has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Oleksii Bashynskyi
National University of Life and Environmental Sciences of Ukraine
2 shared publications - Andrii Kozak
Kyiv National University of Construction and Architecture
1 shared publication - I. V. Genzerskyi
ТОВ «ЛІРА CАПР
1 shared publication - Mariia Barabash
National Aviation University
1 shared publication - Oleksandr Dubyk
Державний університет «Київський авіаційний інститут
1 shared publication - Serhii Bilyk
Kyiv National University of Construction and Architecture
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Assessment of the effect of the fluctuating component of wind pressure on a lattice telecommunication tower
The paper presents a calculation methodology for accounting for the fluctuating component of wind loading in the analysis of a spatial lattice telecommunication tower 50 m high, designed according to a modular concept (2.0 m vertical module) with plan-dimension changes along the height. Unlike the standard approach, where the dynamic coefficient is taken as an input multiplier, a methodology based on the peak response parameter is proposed. In this methodology, the equivalent dynamic coefficient is determined by the criterion of the structure’s peak response (top displacement, base bending moment, or critical axial force), and the distribution of equivalent nodal forces is formed so as to ensure equality of the generalized modal force in the first vibration mode. The matrix form of the equations of motion is given in full as , with derivation of the element stiffness and mass matrices of a spatial truss element and rules for assembling the global matrices. An algorithm is proposed for piecewise formation of the equivalent wind load over the height intervals 0–32, 32–34, 34–44, 44–46, and 46–50 m, converting pressure to forces through the effective projected area of the lattice. The methodology provides a physically justified consideration of the fluctuating component without direct time-history simulation of the wind process and improves the reproducibility of calculation results. In addition, the choice of the first mode as dominant for the along-wind response is substantiated, and procedural checks of load consistency are provided through equality of the generalized modal force. It is shown that the piecewise discretization enables correct consideration of structural transitions and differences in «wind-exposed area» along the height, while the use of the effective projected area reduces subjectivity when modeling permeable lattice systems. A control criterion is proposed: and , which guarantees convergence with respect to the selected response quantity.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessAssessment of the effect of the fluctuating component of wind pressure on a lattice telecommunication tower
The paper presents a calculation methodology for accounting for the fluctuating component of wind loading in the analysis of a spatial lattice telecommunication tower 50 m high, designed according to a modular concept (2.0 m vertical module) with plan-dimension changes along the height. Unlike the standard approach, where the dynamic coefficient is taken as an input multiplier, a methodology based on the peak response parameter is proposed. In this methodology, the equivalent dynamic coefficient is determined by the criterion of the structure’s peak response (top displacement, base bending moment, or critical axial force), and the distribution of equivalent nodal forces is formed so as to ensure equality of the generalized modal force in the first vibration mode. The matrix form of the equations of motion is given in full as , with derivation of the element stiffness and mass matrices of a spatial truss element and rules for assembling the global matrices. An algorithm is proposed for piecewise formation of the equivalent wind load over the height intervals 0–32, 32–34, 34–44, 44–46, and 46–50 m, converting pressure to forces through the effective projected area of the lattice. The methodology provides a physically justified consideration of the fluctuating component without direct time-history simulation of the wind process and improves the reproducibility of calculation results. In addition, the choice of the first mode as dominant for the along-wind response is substantiated, and procedural checks of load consistency are provided through equality of the generalized modal force. It is shown that the piecewise discretization enables correct consideration of structural transitions and differences in «wind-exposed area» along the height, while the use of the effective projected area reduces subjectivity when modeling permeable lattice systems. A control criterion is proposed: and , which guarantees convergence with respect to the selected response quantity.
- Open Access
- 27 June 2022
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 12,p. 126-138
ANALYSIS OF THE STRESS-STRAIN STATE OF A FIRE-RESISTANT STEEL FLOOR BEAM
He article presents an improved methodology for numerical modeling of steelstructural elements on the example of a floor beam, taking into account the influence of fire protection material. The article describes a step-by-stepmethodology for calculating fire resistance in LIRA-SAPR software, which shows in detail the principles of fire resistance analysis.This methodology takes into account the nonlinear dependence of changes in the main thermal and technical characteristics of materials, such as the coefficient of thermal conductivity, heat capacity and convective heat transfer, on temperature. The influence of fire protection deformation characteristics of structural elementswas analyzed.The article also describes the distribution of temperature fields over the elements of the experimental section and investigates the change in temperature and strength characteristics of the steel I-beam of the floor as a function of time. Several options for fire protection using materials from a Ukrainian manufacturer are proposed. Theeffectiveness of the above materials is numerically verified. The analysis results of different fire protection options are compared, which allows you to choose the most optimal option. The results of analysis with and without taking into account thenonlinearity of materials are also compared and described. In addition, the article investigates the role of the floor slab as a fire protection material.This makes it possible to determine the influence of the floor slab on the fire resistance of the structure and provide an additional level of safety.The article will be useful for design engineers who work with steel structures, as well as for researchers interested in the impact of fire protection materials on fire resistance. It provides valuable scientific and practical information that can be used to improve the safety and reliability of steel structures in fire-resistant environments.
- 27 June 2022
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 12,p. 126-138
Open AccessANALYSIS OF THE STRESS-STRAIN STATE OF A FIRE-RESISTANT STEEL FLOOR BEAM
He article presents an improved methodology for numerical modeling of steelstructural elements on the example of a floor beam, taking into account the influence of fire protection material. The article describes a step-by-stepmethodology for calculating fire resistance in LIRA-SAPR software, which shows in detail the principles of fire resistance analysis.This methodology takes into account the nonlinear dependence of changes in the main thermal and technical characteristics of materials, such as the coefficient of thermal conductivity, heat capacity and convective heat transfer, on temperature. The influence of fire protection deformation characteristics of structural elementswas analyzed.The article also describes the distribution of temperature fields over the elements of the experimental section and investigates the change in temperature and strength characteristics of the steel I-beam of the floor as a function of time. Several options for fire protection using materials from a Ukrainian manufacturer are proposed. Theeffectiveness of the above materials is numerically verified. The analysis results of different fire protection options are compared, which allows you to choose the most optimal option. The results of analysis with and without taking into account thenonlinearity of materials are also compared and described. In addition, the article investigates the role of the floor slab as a fire protection material.This makes it possible to determine the influence of the floor slab on the fire resistance of the structure and provide an additional level of safety.The article will be useful for design engineers who work with steel structures, as well as for researchers interested in the impact of fire protection materials on fire resistance. It provides valuable scientific and practical information that can be used to improve the safety and reliability of steel structures in fire-resistant environments.
- Open Access
- 30 May 2022
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 108,p. 189-202
Determination of changes inthermal stress state of steel beams in LIRA-SAPR software
In this article, the authors conducted a study of the stress-strain and temperature state of the steel frame of the building.Verification analysis of steel section for fire resistance in the homeland software package is carried out.The obtained results were compared with the results of a similar analysis in a foreign software package.The analysis of the dynamic problem of thermal conductivity of the cross section of the beam is carried out.The basic equations for solving the boundary problem of nonstationary thermal conductivity are given.Also, the algorithm of realization of analysis of temperature deformations on section of a steel beam by finite element method is given.The process of designing analytical model of structural elements and analysis of the stress-strain state when operating temperature is changed is considered.The analysis of kinematic and static characteristics of the calculated model under study is carried out.Based on the obtained analysis results, the temperature fields of the beam at certain time intervals are determined.Due to the uneven distribution of temperature in the cross section of the element, temperature deformations are occured.Also, due to the limitation of deformations by external connections, their appearance is accompanied by the development of temperature stresses.Therefore, the study of the peculiarities of thermal deformations in steel structures has considerable practical importance.Due to the urgency of the problem of determining thermal stresses and strains in structures, it is necessary to clarify and improve existing calculation methods, which can not sufficiently take into account changes in time of physical and mechanical characteristics of steel.Therefore, the authors of the article calculated the coefficients of reduction of the physical properties of the section and performed a static analysis of the structure. The change of the stress-strain state of the floor elements under the influence of fire is shown.The results of the analysis showed the importance of taking into account the influence of temperature on the strength and deformation characteristics in the calculation of structures.The authors of the article developed and presented an algorithm for analysing the strength of steel structures for flexibility, taking into account the thermal conduction analysis and the fire resistance analysis.
- 30 May 2022
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 108,p. 189-202
Open AccessDetermination of changes inthermal stress state of steel beams in LIRA-SAPR software
In this article, the authors conducted a study of the stress-strain and temperature state of the steel frame of the building.Verification analysis of steel section for fire resistance in the homeland software package is carried out.The obtained results were compared with the results of a similar analysis in a foreign software package.The analysis of the dynamic problem of thermal conductivity of the cross section of the beam is carried out.The basic equations for solving the boundary problem of nonstationary thermal conductivity are given.Also, the algorithm of realization of analysis of temperature deformations on section of a steel beam by finite element method is given.The process of designing analytical model of structural elements and analysis of the stress-strain state when operating temperature is changed is considered.The analysis of kinematic and static characteristics of the calculated model under study is carried out.Based on the obtained analysis results, the temperature fields of the beam at certain time intervals are determined.Due to the uneven distribution of temperature in the cross section of the element, temperature deformations are occured.Also, due to the limitation of deformations by external connections, their appearance is accompanied by the development of temperature stresses.Therefore, the study of the peculiarities of thermal deformations in steel structures has considerable practical importance.Due to the urgency of the problem of determining thermal stresses and strains in structures, it is necessary to clarify and improve existing calculation methods, which can not sufficiently take into account changes in time of physical and mechanical characteristics of steel.Therefore, the authors of the article calculated the coefficients of reduction of the physical properties of the section and performed a static analysis of the structure. The change of the stress-strain state of the floor elements under the influence of fire is shown.The results of the analysis showed the importance of taking into account the influence of temperature on the strength and deformation characteristics in the calculation of structures.The authors of the article developed and presented an algorithm for analysing the strength of steel structures for flexibility, taking into account the thermal conduction analysis and the fire resistance analysis.
- 14 June 2020
- Published by Springer Nature
- p. 303-311
Some Technical Solutions for the Use of Aerodrome Pavements in the Soft Soil Conditions
- 14 June 2020
- Published by Springer Nature
- p. 303-311
Some Technical Solutions for the Use of Aerodrome Pavements in the Soft Soil Conditions
- Open Access
- 27 March 2017
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (48) , 129-137
METHODS OF MODELING OF COMPOSITE MATERIALS AND COMPOSITE STRUCTURES ON «LIRA-SAPR»
This paper provides detailed suggestions for the process of structural reinforcement modeling by composite materials on the software package «LIRA-SAPR». It also provides the implementation of bearing capacity checks for reinforced elements on the program called «ESPRI». The article offers an algorithm for calculation of the construction objects in case of design situation changing, considering the modeling of the composite structure reinforcement. It considered the modeling process of reinforcement of structures using classical methods, such as using of metal casing. It also investigated a numerical modeling example of the frame structure reinforcement, with the selection and verification of the composite material.
- 27 March 2017
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (48) , 129-137
Open AccessMETHODS OF MODELING OF COMPOSITE MATERIALS AND COMPOSITE STRUCTURES ON «LIRA-SAPR»
This paper provides detailed suggestions for the process of structural reinforcement modeling by composite materials on the software package «LIRA-SAPR». It also provides the implementation of bearing capacity checks for reinforced elements on the program called «ESPRI». The article offers an algorithm for calculation of the construction objects in case of design situation changing, considering the modeling of the composite structure reinforcement. It considered the modeling process of reinforcement of structures using classical methods, such as using of metal casing. It also investigated a numerical modeling example of the frame structure reinforcement, with the selection and verification of the composite material.