Hasan Bircan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hasan Bircan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Kaan Manisa
Dumlupinar University
6 shared publications - Meryem Cansu Sahin
Usak Universitesi
3 shared publications - Abdullah Engin Çalık
Ege Universitesi
2 shared publications Ahmet Biçer
Program of Opticianry, Gölhisar Vocational School of Health Services, Burdur Mehmet Akif Ersoy University, Gölhisar, Burdur 15400, Turkey
2 shared publicationsHaris Dapo
Department of Physics, Faculty of Sciences, Akdeniz University, Antalya, Turkey
2 shared publicationsIsmail Boztosun
Department of Physics, Faculty of Sciences, Akdeniz University, Antalya, Turkey
2 shared publications
Latest Publications
- Open Access
- 15 February 2026
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 141 (2)
Investigation of gamma radiation absorption parameters and comfort properties of woven fabrics with hybrid yarns containing Haynes 25/L625 alloy
The increasing reliance on X-rays and gamma radiation in healthcare has given rise to a demand for shielding materials that are lightweight, flexible, and free from toxicity. These materials are being developed as substitutes for conventional lead aprons, which are bulky, rigid, and hazardous. In this research, woven textiles produced from hybrid yarns containing Haynes 25/L625 alloy wires and recycled cotton/polyester blends were investigated as a candidate solution, focusing on both radiation attenuation and user comfort. Three weave structures-plain, 3/1 twill, and 5-harness satin-were manufactured by interlacing alloy wires with cotton/polyester yarns. The gamma-ray shielding capability of the materials was examined across a range of 15 photon energies, from 32 to 1408 keV, utilizing a NaI(Tl) scintillation detector. The evaluation encompassed various parameters, including transmission, absorption, linear and mass attenuation coefficients, half-value layer, and shielding effectiveness. A comprehensive characterization of the material’s comfort-related properties was conducted, encompassing parameters such as air permeability, which was measured in accordance with the ISO 9237 standard, porosity, and thermal behavior. The satin weave, which incorporates the highest proportion of alloy, exhibited enhanced attenuation, particularly at lower photon energies, with a mass attenuation coefficient of 6.649 cm 2 /g at 32 keV. The twill fabric demonstrated improved performance at intermediate and higher energies, exhibiting a linear attenuation coefficient of 0.291 cm −1 at 356 keV. In comparison, the plain weave provided the least effective protection. In terms of comfort, the satin and twill structures exhibited higher breathability and porosity, with values of 22% and 19%, respectively, attributable to their more open geometries. In contrast, the plain weave demonstrated reduced air permeability, with 12% porosity, but enhanced thermal dissipation efficiency. The satin weave is optimal for achieving maximum attenuation, while the twill weave provides a balanced compromise with high performance.
- 15 February 2026
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 141 (2)
Open AccessInvestigation of gamma radiation absorption parameters and comfort properties of woven fabrics with hybrid yarns containing Haynes 25/L625 alloy
The increasing reliance on X-rays and gamma radiation in healthcare has given rise to a demand for shielding materials that are lightweight, flexible, and free from toxicity. These materials are being developed as substitutes for conventional lead aprons, which are bulky, rigid, and hazardous. In this research, woven textiles produced from hybrid yarns containing Haynes 25/L625 alloy wires and recycled cotton/polyester blends were investigated as a candidate solution, focusing on both radiation attenuation and user comfort. Three weave structures-plain, 3/1 twill, and 5-harness satin-were manufactured by interlacing alloy wires with cotton/polyester yarns. The gamma-ray shielding capability of the materials was examined across a range of 15 photon energies, from 32 to 1408 keV, utilizing a NaI(Tl) scintillation detector. The evaluation encompassed various parameters, including transmission, absorption, linear and mass attenuation coefficients, half-value layer, and shielding effectiveness. A comprehensive characterization of the material’s comfort-related properties was conducted, encompassing parameters such as air permeability, which was measured in accordance with the ISO 9237 standard, porosity, and thermal behavior. The satin weave, which incorporates the highest proportion of alloy, exhibited enhanced attenuation, particularly at lower photon energies, with a mass attenuation coefficient of 6.649 cm 2 /g at 32 keV. The twill fabric demonstrated improved performance at intermediate and higher energies, exhibiting a linear attenuation coefficient of 0.291 cm −1 at 356 keV. In comparison, the plain weave provided the least effective protection. In terms of comfort, the satin and twill structures exhibited higher breathability and porosity, with values of 22% and 19%, respectively, attributable to their more open geometries. In contrast, the plain weave demonstrated reduced air permeability, with 12% porosity, but enhanced thermal dissipation efficiency. The satin weave is optimal for achieving maximum attenuation, while the twill weave provides a balanced compromise with high performance.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4) , e20240366
Experimental, theoretical, and biological investigations on radiation shielding parameters of boron-doped cerrobend alloys
This experimental and theoretical study investigated the efficiency of radiation absorption by Cerrobend alloy with varying concentrations of B4C compound. Four blocks were prepared containing 0%, 5%, 10%, and 15% B4C, respectively. The study examined radiation attenuation characteristics, including the mass attenuation coefficient, linear attenuation coefficient, half-value layer thickness, and mean free path, as well as radiobiological consequences for each block, using photon energies of 6 and 15 MeV. It has been observed that the rise in the quantity of B4C leads to a decrease in the material’s ability to absorb photons. The highest mass attenuation coefficient at 6 MeV energy was S1 with 0.0432 cm2/g. The half-value layer of samples S2 and S3 exhibited a larger magnitude compared to samples S1. The tenth-value layer findings obtained with photons with 15 MeV energy were S0 < S1 < S2 < S3. In the experiments with photons with 6 MeV energy, the mean free path value of sample S1 was relatively lower than other samples. The experimental results were consistent with the data obtained from GAMOS and XCOM. Experiments and theoretical studies have shown that the Cerrobend alloy’s photon absorption properties are very similar to those of pure Cerrobend when it is doped with 5 wt% B4C.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (4) , e20240366
Open AccessExperimental, theoretical, and biological investigations on radiation shielding parameters of boron-doped cerrobend alloys
This experimental and theoretical study investigated the efficiency of radiation absorption by Cerrobend alloy with varying concentrations of B4C compound. Four blocks were prepared containing 0%, 5%, 10%, and 15% B4C, respectively. The study examined radiation attenuation characteristics, including the mass attenuation coefficient, linear attenuation coefficient, half-value layer thickness, and mean free path, as well as radiobiological consequences for each block, using photon energies of 6 and 15 MeV. It has been observed that the rise in the quantity of B4C leads to a decrease in the material’s ability to absorb photons. The highest mass attenuation coefficient at 6 MeV energy was S1 with 0.0432 cm2/g. The half-value layer of samples S2 and S3 exhibited a larger magnitude compared to samples S1. The tenth-value layer findings obtained with photons with 15 MeV energy were S0 < S1 < S2 < S3. In the experiments with photons with 6 MeV energy, the mean free path value of sample S1 was relatively lower than other samples. The experimental results were consistent with the data obtained from GAMOS and XCOM. Experiments and theoretical studies have shown that the Cerrobend alloy’s photon absorption properties are very similar to those of pure Cerrobend when it is doped with 5 wt% B4C.
- Open Access
- 25 May 2023
- Published by Suleyman Demirel Universitesi Fen Edebiyat Fakultesi Fen Dergisi in Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen Dergisi
- Vol. 18 (1) , 10-17
Validation of a Proposed Equation for Determining the Half-Thickness Value of Gamma and X-Ray Radiation
Half-value layer (HVL) is energy dependent on the photon, much as the attenuation coefficient. Increasing the penetrating energy of a photon stream causes an increase in a substance's HVL. Before calculating the HVL value, the linear attenuation coefficient (μ) must be established. A review of the literature indicated that there is presently no Monte Carlo-based sufficient tool for direct calculation of the HVL value and direct computation suitable for material design and all changes based on sophisticated simulation methods. This study aims to calculate HVL data with GAMOS simulation in the 0.1-20 MeV energy range for some anatomical structures defined in ICRU-44 (bone cortical, brain, gray/white matter, breast tissue, eye lens, and testis). The HVL values of the anatomical structures used in the GAMOS code were compared with the results in the literature. As a result, HVL values obtained from GAMOS simulation for different materials and biological structures were compatible with the literature.
- 25 May 2023
- Published by Suleyman Demirel Universitesi Fen Edebiyat Fakultesi Fen Dergisi in Süleyman Demirel Üniversitesi Fen Edebiyat Fakültesi Fen Dergisi
- Vol. 18 (1) , 10-17
Open AccessValidation of a Proposed Equation for Determining the Half-Thickness Value of Gamma and X-Ray Radiation
Half-value layer (HVL) is energy dependent on the photon, much as the attenuation coefficient. Increasing the penetrating energy of a photon stream causes an increase in a substance's HVL. Before calculating the HVL value, the linear attenuation coefficient (μ) must be established. A review of the literature indicated that there is presently no Monte Carlo-based sufficient tool for direct calculation of the HVL value and direct computation suitable for material design and all changes based on sophisticated simulation methods. This study aims to calculate HVL data with GAMOS simulation in the 0.1-20 MeV energy range for some anatomical structures defined in ICRU-44 (bone cortical, brain, gray/white matter, breast tissue, eye lens, and testis). The HVL values of the anatomical structures used in the GAMOS code were compared with the results in the literature. As a result, HVL values obtained from GAMOS simulation for different materials and biological structures were compatible with the literature.
- 1 March 2020
- Published by Pleiades Publishing Ltd in Physics of Atomic Nuclei
- Vol. 83 (2) , 351-367
Density Dependence of Nuclear Matter Symmetry Energy: VMC Calculations
A Variational Monte-Carlo (VMC) method is employed to investigate the density dependence of the symmetry energy of isospin asymmetric nuclear matter. The realistic Urbana \(V\)14 nucleon–nucleon interaction potential of Lagaris and Pandharipande was used in the VMC calculations with addition of a phenomenological density-dependent term to simulate many-body interactions. The symmetry energy is obtained for different densities and compared with the data found in the literature, and it was observed that the results obtained in this study reasonably agree with the results found in the literature, and the symmetry energy is found to increase almost linearly with the density. We obtained the symmetry energy coefficient at saturation density \(\rho=0.16\) fm\({}^{-3}\) to be about 26.89 MeV, which is in agreement with the empirical value 30 \(\pm\) 4 MeV. Also, the incompressibility factor of the nuclear matter and the equation of the state of pure neutron matter were reported. The results obtained are consistent with those obtained by various authors with different potentials and techniques.- 1 March 2020
- Published by Pleiades Publishing Ltd in Physics of Atomic Nuclei
- Vol. 83 (2) , 351-367
Density Dependence of Nuclear Matter Symmetry Energy: VMC Calculations
A Variational Monte-Carlo (VMC) method is employed to investigate the density dependence of the symmetry energy of isospin asymmetric nuclear matter. The realistic Urbana \(V\)14 nucleon–nucleon interaction potential of Lagaris and Pandharipande was used in the VMC calculations with addition of a phenomenological density-dependent term to simulate many-body interactions. The symmetry energy is obtained for different densities and compared with the data found in the literature, and it was observed that the results obtained in this study reasonably agree with the results found in the literature, and the symmetry energy is found to increase almost linearly with the density. We obtained the symmetry energy coefficient at saturation density \(\rho=0.16\) fm\({}^{-3}\) to be about 26.89 MeV, which is in agreement with the empirical value 30 \(\pm\) 4 MeV. Also, the incompressibility factor of the nuclear matter and the equation of the state of pure neutron matter were reported. The results obtained are consistent with those obtained by various authors with different potentials and techniques.- 5 February 2020
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters A
- Vol. 35 (10)
Using a clinical linac to determine the energies of gamma-ray transitions and half-lives of barium nuclei
- 5 February 2020
- Published by World Scientific Pub Co Pte Ltd in Modern Physics Letters A
- Vol. 35 (10)
Using a clinical linac to determine the energies of gamma-ray transitions and half-lives of barium nuclei
- Open Access
- 1 January 2018
- Published by Walter de Gruyter GmbH in Open Physics
- Vol. 16 (1) , 63-68
Determination of the energy transitions and half-lives of Rubidium nuclei
The photonuclear reactions, first extensively studied in the 1970’s and performed using the gamma rays obtained via bremsstrahlung, are a standard nuclear physics experiment. In this study, a non-enriched Rubidium sample was irradiated with photons produced by a clinical linear electron accelerator (cLINACs) with energies up to 18 MeV with the aim of activating it through photonuclear reactions. The activated sample was measured with a high purity germanium detector (HPGe) with the aim of measuring the transition energies and half-lives. The spectroscopic analysis performed on the obtained data yielded high quality results for the transition energies with precision matching or surpassing the literature data. For the half-lives the results were consistent with the literature, most notably the half-life of 84 m Rb decay was determined as 20.28(2) m. The results for both energies and half-lives further show that the clinical linear accelerators can be successfully used as an efficient tool in experimental nuclear research endeavors.
- 1 January 2018
- Published by Walter de Gruyter GmbH in Open Physics
- Vol. 16 (1) , 63-68
Open AccessDetermination of the energy transitions and half-lives of Rubidium nuclei
The photonuclear reactions, first extensively studied in the 1970’s and performed using the gamma rays obtained via bremsstrahlung, are a standard nuclear physics experiment. In this study, a non-enriched Rubidium sample was irradiated with photons produced by a clinical linear electron accelerator (cLINACs) with energies up to 18 MeV with the aim of activating it through photonuclear reactions. The activated sample was measured with a high purity germanium detector (HPGe) with the aim of measuring the transition energies and half-lives. The spectroscopic analysis performed on the obtained data yielded high quality results for the transition energies with precision matching or surpassing the literature data. For the half-lives the results were consistent with the literature, most notably the half-life of 84 m Rb decay was determined as 20.28(2) m. The results for both energies and half-lives further show that the clinical linear accelerators can be successfully used as an efficient tool in experimental nuclear research endeavors.
- 1 January 2017
- Published by Jagiellonian University in Acta Physica Polonica B
- Vol. 48 (2)
Nuclear Matter Incompressibility: From VMC to Skyrme--Landau Parameterization
- 1 January 2017
- Published by Jagiellonian University in Acta Physica Polonica B
- Vol. 48 (2)
Nuclear Matter Incompressibility: From VMC to Skyrme--Landau Parameterization
- Open Access
- 18 June 2012
- Published by African Journals Online (AJOL) in Bulletin of the Chemical Society of Ethiopia
- Vol. 26 (2)
Theoretical molecular structure, vibrational frequencies and NMR investigations of 2-[(1E)-2-aza-2-(5-methyl(2-pyridyl)ethenyl)]-4-bromobenzen-1-ol
The normal mode frequencies and corresponding vibrational assignments, 1H and 13C NMR chemical shifts and structural parameters (bond lengths, bond and dihedral angles) of 2-[(1E)-2-aza-2-(5-methyl(2-pyridyl)ethenyl)]-4-bromobenzen-1-ol (2mpe-4bb) Schiff base compound have been theoretically examined by means of Hartree-Fock (HF) and Becke-3-Lee-Yang-Parr (B3LYP) density functional methods with 6-31G(d) and 6-311++G(d,p) basis sets. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 2mpe-4bb have been predicted. Theoretical results have been successfully compared with available experimental data in the literature. Regarding the calculations, 2mpe-4bb prefers enol-imine form and DFT method is superior to HF approach except for predicting bond lengths. KEY WORDS: Schiff bases, Normal mode frequencies, HF, DFT, NMR Bull. Chem. Soc. Ethiop. 2012, 26(2), 279-285. DOI: http://dx.doi.org/10.4314/bcse.v26i2.11
- 18 June 2012
- Published by African Journals Online (AJOL) in Bulletin of the Chemical Society of Ethiopia
- Vol. 26 (2)
Open AccessTheoretical molecular structure, vibrational frequencies and NMR investigations of 2-[(1E)-2-aza-2-(5-methyl(2-pyridyl)ethenyl)]-4-bromobenzen-1-ol
The normal mode frequencies and corresponding vibrational assignments, 1H and 13C NMR chemical shifts and structural parameters (bond lengths, bond and dihedral angles) of 2-[(1E)-2-aza-2-(5-methyl(2-pyridyl)ethenyl)]-4-bromobenzen-1-ol (2mpe-4bb) Schiff base compound have been theoretically examined by means of Hartree-Fock (HF) and Becke-3-Lee-Yang-Parr (B3LYP) density functional methods with 6-31G(d) and 6-311++G(d,p) basis sets. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 2mpe-4bb have been predicted. Theoretical results have been successfully compared with available experimental data in the literature. Regarding the calculations, 2mpe-4bb prefers enol-imine form and DFT method is superior to HF approach except for predicting bond lengths. KEY WORDS: Schiff bases, Normal mode frequencies, HF, DFT, NMR Bull. Chem. Soc. Ethiop. 2012, 26(2), 279-285. DOI: http://dx.doi.org/10.4314/bcse.v26i2.11
- Open Access
- 1 April 2004
- Published by MDPI AG in Mathematical and Computational Applications
- Vol. 9 (1) , 79-90
The Investigation of the log(ft) Values for the Allowed Gamow-Teller Transitions of Some Deformed Nuclei
The log(ft) values of allowed β± decay between odd-A nuclei for 125 < A < 180 mass region are investigated. Single particle energies and wave functions are calculated by making use of a deformed Woods-Saxon potential. The calculations are performed in the framework of proton-neutron quasi particle random phase approximation (QRPA) including the schematic residual spin-isospin interaction among the nucleons in the particle hole channel. The calculations indicated that the results obtained through using the χGT=5.2/A0.7 are more in agreement with experimental observations.
- 1 April 2004
- Published by MDPI AG in Mathematical and Computational Applications
- Vol. 9 (1) , 79-90
Open AccessThe Investigation of the log(ft) Values for the Allowed Gamow-Teller Transitions of Some Deformed Nuclei
The log(ft) values of allowed β± decay between odd-A nuclei for 125 < A < 180 mass region are investigated. Single particle energies and wave functions are calculated by making use of a deformed Woods-Saxon potential. The calculations are performed in the framework of proton-neutron quasi particle random phase approximation (QRPA) including the schematic residual spin-isospin interaction among the nucleons in the particle hole channel. The calculations indicated that the results obtained through using the χGT=5.2/A0.7 are more in agreement with experimental observations.