Sagar Patel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sagar Patel has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Mihaela Vlasea
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Canada
10 shared publications Haoxiu Chen
2 shared publications- Stewart McLachlin
Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
2 shared publications - Adam Yu
University of Waterloo Department of Systems Design Engineering Waterloo, ON N2L 3G1 , Canada
1 shared publication Ahmad Varvani-Farahani
Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, Canada
1 shared publicationAli Rezaei
1 shared publication
Latest Publications
- Open Access
- 27 June 2026
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 354
Absorptivity scaling behaviour during laser powder bed fusion of copper alloys
- 27 June 2026
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 354
Open AccessAbsorptivity scaling behaviour during laser powder bed fusion of copper alloys
- Open Access
- 3 January 2026
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 953
Microstructural tailoring to promote Portevin-Le Chatelier effect in laser powder bed fusion fabricated AlMgScZr alloy
- 3 January 2026
- Published by Elsevier in Materials Science and Engineering: A
- Vol. 953
Open AccessMicrostructural tailoring to promote Portevin-Le Chatelier effect in laser powder bed fusion fabricated AlMgScZr alloy
- Open Access
- 13 May 2025
- Published by Elsevier in Advances in Industrial and Manufacturing Engineering
- Vol. 10
Towards generalizable machine learning prediction of downskin surface roughness in laser powder bed fusion
- 13 May 2025
- Published by Elsevier in Advances in Industrial and Manufacturing Engineering
- Vol. 10
Open AccessTowards generalizable machine learning prediction of downskin surface roughness in laser powder bed fusion
- 17 January 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (5) , 1-29
Detection of Traceability Features Embedded in Metal Additive Manufacturing Components by Phased Array Ultrasonic Testing
With the continuous advancement of additive manufacturing (AM) processes, ensuring that traceability and security for AM components has become paramount. Embedding unique identification features in AM components, akin to fingerprints, is essential for logistics management, certification, and counterfeiting prevention. In this article, we propose a novel approach utilizing quick response (QR) codes embedded via arrangements of unmelted features in rectangular, cylindrical, and spherical shapes within steel blocks (MPIF 4406) fabricated using laser powder bed fusion (LPBF). While computed tomography (CT) has been the dominant method for reading embedded QR codes, this article utilizes high-frequency phased array ultrasonic testing (PAUT) for reading these QR codes for the first time. Due to the layer-by-layer manufacturing process, the up-facing printed surfaces of the QR codes exhibit smooth characteristics (upskin), while the down-facing surfaces are rough (downskin). Ultrasound images from both surfaces are captured, each yielding distinct results. These captured images undergo image processing to compare them with their original designs. Linear and nonlinear image processing filters are applied to enhance the captured images, followed by feature extraction using two methods, Residual Network-50 (ResNet-50) and Histogram of Oriented Gradients (HOG), to evaluate their similarity to the original QR codes. The results reveal similarity percentages ranging from 70% to 85%. Most QR code images are readable, with upskin ultrasonic data providing better readability. This research underscores high-frequency PAUT as a promising solution for the rapid scanning of embedded QR codes in metal AM components, showcasing its potential for enhancing traceability and security in AM processes.
- 17 January 2025
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 147 (5) , 1-29
Detection of Traceability Features Embedded in Metal Additive Manufacturing Components by Phased Array Ultrasonic Testing
With the continuous advancement of additive manufacturing (AM) processes, ensuring that traceability and security for AM components has become paramount. Embedding unique identification features in AM components, akin to fingerprints, is essential for logistics management, certification, and counterfeiting prevention. In this article, we propose a novel approach utilizing quick response (QR) codes embedded via arrangements of unmelted features in rectangular, cylindrical, and spherical shapes within steel blocks (MPIF 4406) fabricated using laser powder bed fusion (LPBF). While computed tomography (CT) has been the dominant method for reading embedded QR codes, this article utilizes high-frequency phased array ultrasonic testing (PAUT) for reading these QR codes for the first time. Due to the layer-by-layer manufacturing process, the up-facing printed surfaces of the QR codes exhibit smooth characteristics (upskin), while the down-facing surfaces are rough (downskin). Ultrasound images from both surfaces are captured, each yielding distinct results. These captured images undergo image processing to compare them with their original designs. Linear and nonlinear image processing filters are applied to enhance the captured images, followed by feature extraction using two methods, Residual Network-50 (ResNet-50) and Histogram of Oriented Gradients (HOG), to evaluate their similarity to the original QR codes. The results reveal similarity percentages ranging from 70% to 85%. Most QR code images are readable, with upskin ultrasonic data providing better readability. This research underscores high-frequency PAUT as a promising solution for the rapid scanning of embedded QR codes in metal AM components, showcasing its potential for enhancing traceability and security in AM processes.
- 24 April 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (6)
A Manufacturability Evaluation of Complex Architectures by Laser Powder Bed Fusion Additive Manufacturing
Additive manufacturing (AM) enables new possibilities for the design and manufacturing of complex metal architectures. Incorporating lattice structures into complex part geometries can enhance strength-to-weight and surface area-to-volume ratios for valuable components, particularly in industries such as medical devices and aerospace. However, lattice structures and their interconnections may result in unsupported down-skin surfaces, potentially limiting their manufacturability by metal AM technologies, such as laser powder bed fusion (LPBF). This study aimed to examine the correlation between down-skin surface area and the manufacturability of lattice structures fabricated using LPBF. Image processing algorithms were used to analyze down-skin surface areas of seven unique lattice designs and to devise quantitative metrics (such as down-skin surface area, discrete surface count, surface interconnectivity, down-skin ratio, over-print/under-print volumes, etc.) to evaluate LPBF manufacturability. The seven lattice designs were subsequently manufactured using maraging steel via LPBF and then examined using imaging using X-ray micro-computed tomography (XCT). The geometric accuracy of the lattice designs was compared with XCT scans of the manufactured lattices by employing a voxel-based image comparison technique. The results indicated a strong relationship between down-skin surface area, surface interconnectivity, and the manufacturability of a given lattice design. The digital manufacturability evaluation workflow was also applied to a medical device design, further affirming its potential industrial utility for complex geometries.
- 24 April 2024
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 146 (6)
A Manufacturability Evaluation of Complex Architectures by Laser Powder Bed Fusion Additive Manufacturing
Additive manufacturing (AM) enables new possibilities for the design and manufacturing of complex metal architectures. Incorporating lattice structures into complex part geometries can enhance strength-to-weight and surface area-to-volume ratios for valuable components, particularly in industries such as medical devices and aerospace. However, lattice structures and their interconnections may result in unsupported down-skin surfaces, potentially limiting their manufacturability by metal AM technologies, such as laser powder bed fusion (LPBF). This study aimed to examine the correlation between down-skin surface area and the manufacturability of lattice structures fabricated using LPBF. Image processing algorithms were used to analyze down-skin surface areas of seven unique lattice designs and to devise quantitative metrics (such as down-skin surface area, discrete surface count, surface interconnectivity, down-skin ratio, over-print/under-print volumes, etc.) to evaluate LPBF manufacturability. The seven lattice designs were subsequently manufactured using maraging steel via LPBF and then examined using imaging using X-ray micro-computed tomography (XCT). The geometric accuracy of the lattice designs was compared with XCT scans of the manufactured lattices by employing a voxel-based image comparison technique. The results indicated a strong relationship between down-skin surface area, surface interconnectivity, and the manufacturability of a given lattice design. The digital manufacturability evaluation workflow was also applied to a medical device design, further affirming its potential industrial utility for complex geometries.
- 24 September 2022
- Published by Elsevier in Additive Manufacturing
- Vol. 59
The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy — AlSi10Mg
- 24 September 2022
- Published by Elsevier in Additive Manufacturing
- Vol. 59
The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy — AlSi10Mg
- 9 August 2022
- Published by Elsevier in Scripta Materialia
- Vol. 221
Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries
- 9 August 2022
- Published by Elsevier in Scripta Materialia
- Vol. 221
Enhanced tensile ductility of an additively manufactured AlSi10Mg alloy by reducing the density of melt pool boundaries
- Open Access
- 26 November 2021
- Published by Elsevier in Data in Brief
- Vol. 39, 107633
Data related to architectural bone parameters and the relationship to Ti lattice design for powder bed fusion additive manufacturing
- 26 November 2021
- Published by Elsevier in Data in Brief
- Vol. 39, 107633
Open AccessData related to architectural bone parameters and the relationship to Ti lattice design for powder bed fusion additive manufacturing
- 29 June 2021
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 30 (9) , 6766-6776
Nondestructive Characterization of Laser Powder Bed Fusion Components Using High-Frequency Phased Array Ultrasonic Testing
- 29 June 2021
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 30 (9) , 6766-6776
Nondestructive Characterization of Laser Powder Bed Fusion Components Using High-Frequency Phased Array Ultrasonic Testing