Vahid Damideh
Vahid Damideh has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
A. Sadighzadeh
Atomic Energy Organization of Iran
12 shared publications- Sor Heoh Saw
Institute for Plasma Focus Studies, 32 Oakpark Drive, Chadstone, VIC 3148, Australia
7 shared publications A. A. Zaeem
Nuclear Science and Technology Research Institute
4 shared publicationsA. Heidarnia
Plasma Physics and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, AEOI, Tehran, Iran
4 shared publicationsM. Torabi
Plasma Physics and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute, AEOI, Tehran, Iran
4 shared publications- Paul Lee
Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, Singapore
4 shared publications
Latest Publications
- Open Access
- 2 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Experimental results and analysis of plasma dynamics and radiation output of the 100 kV dense plasma focus FAETON-I
FAETON-I is the highest direct-charged voltage plasma focus (PF), at 100 kV, 1 MA peak current. F-I produces consistent \(2.5 \times 10^{10}\) D-D neutrons/shot, over 3 MeV X-rays and \(\sim 350\) keV deuterons, demonstrating unique combined neutron-gamma environment. Its peak neutron yield was recorded at \(8 \times 10^{10}\) neutrons/shot at 12 Torr deuterium. The best peak dynamics-induced pinch voltage was measured at 194 kV. A major difficulty anticipated for PF operation at high-voltage and high-current is the likelihood of re-strikes which divert current away from the compressing plasma. F-I shows excellent current sheath dynamics and above-scaling D-D neutron yield, despite severe re-strikes. This study, correlating current and voltage time profiles with radial trajectories, reveals that the dynamics-induced voltage peak of \(\sim 150\) kV, produces deuteron beam first, then the re-strikes, which do not affect the target pinch plasma in geometry and areal density. Thus, this first neutron pulse is hardly affected by re-strikes, and the very high-voltage results in above-scaling out-performance, despite degradation of the second neutron pulse from pinch instabilities. Moreover, upgrading to D-T operation, it is expected that the first pulse at \(100-200\) keV (peak D-T cross section) ion energy, will completely dominate the second pulse with micro-beams at MeV (low D-T cross section).- 2 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Open AccessExperimental results and analysis of plasma dynamics and radiation output of the 100 kV dense plasma focus FAETON-I
FAETON-I is the highest direct-charged voltage plasma focus (PF), at 100 kV, 1 MA peak current. F-I produces consistent \(2.5 \times 10^{10}\) D-D neutrons/shot, over 3 MeV X-rays and \(\sim 350\) keV deuterons, demonstrating unique combined neutron-gamma environment. Its peak neutron yield was recorded at \(8 \times 10^{10}\) neutrons/shot at 12 Torr deuterium. The best peak dynamics-induced pinch voltage was measured at 194 kV. A major difficulty anticipated for PF operation at high-voltage and high-current is the likelihood of re-strikes which divert current away from the compressing plasma. F-I shows excellent current sheath dynamics and above-scaling D-D neutron yield, despite severe re-strikes. This study, correlating current and voltage time profiles with radial trajectories, reveals that the dynamics-induced voltage peak of \(\sim 150\) kV, produces deuteron beam first, then the re-strikes, which do not affect the target pinch plasma in geometry and areal density. Thus, this first neutron pulse is hardly affected by re-strikes, and the very high-voltage results in above-scaling out-performance, despite degradation of the second neutron pulse from pinch instabilities. Moreover, upgrading to D-T operation, it is expected that the first pulse at \(100-200\) keV (peak D-T cross section) ion energy, will completely dominate the second pulse with micro-beams at MeV (low D-T cross section). - Open Access
- 18 April 2025
- Published by Springer Nature in Research Square
Faeton-I: Investigation of plasma dynamics and radiation output of a 100 kV plasma focus device
Faeton-I (F-I) is the highest direct-charged voltage plasma focus (PF), at 100 kV, 1 MA peak current. F-I produces consistent 2.5×1010 D-D neutrons/shot, over 3 MeV X-rays and ~350 keV deuterons, demonstrating unique combined neutron-gamma environment. Its peak neutron yield was recorded at 8×1010 neutrons/shot at 12 torr deuterium. The overall best peak dynamics-induced pinch voltage of the F-I was measured at 194 kV. A major difficulty anticipated for PF operation at high-voltage and high-current is the likelihood of re-strikes which divert current away from the compressing plasma. F-I shows excellent current sheath dynamics and above-scaling D-D neutron yield, despite severe re-strikes. This study, correlating current and voltage time profiles with radial trajectories, reveals that the dynamics-induced voltage peak of ~150 kV, produces the deuteron beam first, then the re-strikes, which do not affect the target pinch plasma in geometry and areal density. Thus, this first neutron pulse is unaffected by re-strikes, and the very high-voltage results in above-scaling out-performance, despite degradation of the second neutron pulse from pinch instabilities. The first pulse at 100-200 keV (peak D-T cross section) ion energy, completely dominates the second pulse with micro-beams at MeV (low D-T cross section).
- 18 April 2025
- Published by Springer Nature in Research Square
Open AccessFaeton-I: Investigation of plasma dynamics and radiation output of a 100 kV plasma focus device
Faeton-I (F-I) is the highest direct-charged voltage plasma focus (PF), at 100 kV, 1 MA peak current. F-I produces consistent 2.5×1010 D-D neutrons/shot, over 3 MeV X-rays and ~350 keV deuterons, demonstrating unique combined neutron-gamma environment. Its peak neutron yield was recorded at 8×1010 neutrons/shot at 12 torr deuterium. The overall best peak dynamics-induced pinch voltage of the F-I was measured at 194 kV. A major difficulty anticipated for PF operation at high-voltage and high-current is the likelihood of re-strikes which divert current away from the compressing plasma. F-I shows excellent current sheath dynamics and above-scaling D-D neutron yield, despite severe re-strikes. This study, correlating current and voltage time profiles with radial trajectories, reveals that the dynamics-induced voltage peak of ~150 kV, produces the deuteron beam first, then the re-strikes, which do not affect the target pinch plasma in geometry and areal density. Thus, this first neutron pulse is unaffected by re-strikes, and the very high-voltage results in above-scaling out-performance, despite degradation of the second neutron pulse from pinch instabilities. The first pulse at 100-200 keV (peak D-T cross section) ion energy, completely dominates the second pulse with micro-beams at MeV (low D-T cross section).
- Open Access
- 23 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-10
Experimental results of a 330 GW impedance-matched Marx generator
Impedance-matched Marx generators (IMGs) are considered next generation pulsed-power drivers because of their long lifetime (> 10,000 shots), repetition rate (> 0.1-Hz), fast rise time (~ 100-ns), and high-energy-delivery efficiency (~ 90%). “TITAN” is a 14-stage IMG designed to deliver 1-TW to a 2-Ω matched load. In this paper, design, simulation, and experimental results for six stages of TITAN including its triggering system, air delivery system, and pulse shaping are presented. To achieve efficiency over 85% and maximize the capability of an IMG, synchronized triggering, reduced pre-fire rate, and pulse shaping ability are crucial. In this paper, novel engineering solutions are introduced, tested, and proven to overcome those challenges. 6-stage TITAN, powered by 102 identical bricks and 102 field-distortion-triggered gas switches, could generate ~ 600-kA and ~ 700-kV across a ~ 0.9-Ω matched load when fully charged to ± 100-kV. In these experiments, 6-stage TITAN is tested up to ± 70-kV charge voltage which delivers a peak power of 330-GW to a 1.2-Ω resistive load.
- 23 July 2024
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-10
Open AccessExperimental results of a 330 GW impedance-matched Marx generator
Impedance-matched Marx generators (IMGs) are considered next generation pulsed-power drivers because of their long lifetime (> 10,000 shots), repetition rate (> 0.1-Hz), fast rise time (~ 100-ns), and high-energy-delivery efficiency (~ 90%). “TITAN” is a 14-stage IMG designed to deliver 1-TW to a 2-Ω matched load. In this paper, design, simulation, and experimental results for six stages of TITAN including its triggering system, air delivery system, and pulse shaping are presented. To achieve efficiency over 85% and maximize the capability of an IMG, synchronized triggering, reduced pre-fire rate, and pulse shaping ability are crucial. In this paper, novel engineering solutions are introduced, tested, and proven to overcome those challenges. 6-stage TITAN, powered by 102 identical bricks and 102 field-distortion-triggered gas switches, could generate ~ 600-kA and ~ 700-kV across a ~ 0.9-Ω matched load when fully charged to ± 100-kV. In these experiments, 6-stage TITAN is tested up to ± 70-kV charge voltage which delivers a peak power of 330-GW to a 1.2-Ω resistive load.
- Open Access
Analysis of Essential Features and Optimal Operational Parameters of an RF-ICP Torch for Waste Treatment Applications
Recently, plasma-based pyrolysis has gained increasing prominence as a technology in response to the growing challenges in waste disposal and the recognition of opportunities to generate valuable by-products. The efficiency of the pyrolysis process is intricately tied to the characteristics of the plasma involved, particularly the effective electron temperature (Teff) and plasma density (ne). This study aimed to conduct a comprehensive examination of the essential features and optimal operational parameters of a developed RF-ICP torch specifically designed for small-scale municipal solid waste (MSW) pyrolysis (mixture of paper and polypropylene) with the goal of controlling both the torch and the overall process. Using optical emission spectroscopy (OES), we measured plasma parameters, specifically (Teff) and (ne), while varying argon gas flow rates and RF powers. The (Teff) and (ne)were determined using the Boltzmann plot and Stark broadening, respectively. The RF torch was found to generate (ne) up to approximately and (Teff) up to around 8200 K, with both parameters being controlled by the discharge power and gas flow rate. Additionally, a power-losing mechanism, namely the anomalous skin effect, was detected during the study, which is uncommon in atmospheric plasma discharge.Open AccessAnalysis of Essential Features and Optimal Operational Parameters of an RF-ICP Torch for Waste Treatment Applications
Recently, plasma-based pyrolysis has gained increasing prominence as a technology in response to the growing challenges in waste disposal and the recognition of opportunities to generate valuable by-products. The efficiency of the pyrolysis process is intricately tied to the characteristics of the plasma involved, particularly the effective electron temperature (Teff) and plasma density (ne). This study aimed to conduct a comprehensive examination of the essential features and optimal operational parameters of a developed RF-ICP torch specifically designed for small-scale municipal solid waste (MSW) pyrolysis (mixture of paper and polypropylene) with the goal of controlling both the torch and the overall process. Using optical emission spectroscopy (OES), we measured plasma parameters, specifically (Teff) and (ne), while varying argon gas flow rates and RF powers. The (Teff) and (ne)were determined using the Boltzmann plot and Stark broadening, respectively. The RF torch was found to generate (ne) up to approximately and (Teff) up to around 8200 K, with both parameters being controlled by the discharge power and gas flow rate. Additionally, a power-losing mechanism, namely the anomalous skin effect, was detected during the study, which is uncommon in atmospheric plasma discharge. - Open Access
- 2 August 2023
- Published by MDPI AG in Preprints.org
Optical Characterization of RF Plasma Torch for Municipal Solid Waste (MSW) Treatment Process
Over the past decade, plasma waste treatment has become a more prominent technology due to increasing problems with waste disposal and realizing opportunities to generate valuable co-products. Plasma waste treatment extensively uses atmospheric pressure (RF) inductive coupled plasma (ICP) torches. In situ Optical Emission Spectroscopy (OES) is used to evaluate the developed RF ICP torch for Municipal Solid Waste (MSW) treatment and ascertain the plasma parameters to understand the physical mechanism involved. The argon plasma jet's electron temperature and plasma density outside the torch chamber are calculated using the Boltzmann plot and Stark broadening at different gas flow rates, and RF power. The expected electron temperature and plasma density behaviour were observed at a low gas flow rate. The electron temperature decreases with the RF power from 8089 K to 6097 K as demand for increasing the plasma density. An energy loss mechanism was revealed while raising the gas flow rate, as the electron temperature increases with RF power from 5750 K to 6221 K, and the plasma density decreases. This behaviour is due to the anomalous skin effect. Detecting and avoiding this phenomenon is essential as it negatively affects torch energy efficiency and waste treatment.
- 2 August 2023
- Published by MDPI AG in Preprints.org
Open AccessOptical Characterization of RF Plasma Torch for Municipal Solid Waste (MSW) Treatment Process
Over the past decade, plasma waste treatment has become a more prominent technology due to increasing problems with waste disposal and realizing opportunities to generate valuable co-products. Plasma waste treatment extensively uses atmospheric pressure (RF) inductive coupled plasma (ICP) torches. In situ Optical Emission Spectroscopy (OES) is used to evaluate the developed RF ICP torch for Municipal Solid Waste (MSW) treatment and ascertain the plasma parameters to understand the physical mechanism involved. The argon plasma jet's electron temperature and plasma density outside the torch chamber are calculated using the Boltzmann plot and Stark broadening at different gas flow rates, and RF power. The expected electron temperature and plasma density behaviour were observed at a low gas flow rate. The electron temperature decreases with the RF power from 8089 K to 6097 K as demand for increasing the plasma density. An energy loss mechanism was revealed while raising the gas flow rate, as the electron temperature increases with RF power from 5750 K to 6221 K, and the plasma density decreases. This behaviour is due to the anomalous skin effect. Detecting and avoiding this phenomenon is essential as it negatively affects torch energy efficiency and waste treatment.
- Open Access
RF-ICP Thermal Plasma for Thermoplastic Waste Pyrolysis Process with High Conversion Yield and Tar Elimination
This paper demonstrates an RF thermal plasma pyrolysis reaction apparatus that achieves 89 wt.% reaction conversion yield with no tar content. The demonstrated experimental apparatus consists of a 1100 W RFVII Inc. (104 Church St, Newfield, NJ 08344, United States) @ 13.56 MHz RF thermal plasma generator, a Navio matching network, intelligent feedback controller, and an 8-turn copper RF-ICP torch embedded in a 12 L thermochemical reactor. The intelligent feedback controller optimizes the thermal performance based on feedback signals from three online gas analyzers: CO, CO2 and NOx. The feedback controller output signal controls the RF thermal plasma torch current that provides real-time temperature control. The proposed reaction system achieves precise temperature profiles for both pyrolysis and gasification as well as increases end-product yield and eliminates undesired products such as tar and char. The identified hydrocarbon liquid mixture is 90 wt.% gasoline and 10 wt.%. diesel. The 8-turn RF-ICP thermal plasma torch has an average heating rate of +35 °C/min and a maximum operating temperature of 2000 °C and is able to sustain stable flame for more than 30 min. The reaction operating parameters are (550–990 °C = 30 min for pyrolysis and (1300 °C = 1 sec) for the gasification process. The identified hydrocarbon liquid products are 90 wt.% of a n-butyl-benzene (C6H5C4H9) and oluene (C7H8) mixture with less than 10 wt.% decane diesel fuel (C10 H22). Comsol simulation is used to assess the RF-ICP thermal plasma torch’s thermal performance.Open AccessRF-ICP Thermal Plasma for Thermoplastic Waste Pyrolysis Process with High Conversion Yield and Tar Elimination
This paper demonstrates an RF thermal plasma pyrolysis reaction apparatus that achieves 89 wt.% reaction conversion yield with no tar content. The demonstrated experimental apparatus consists of a 1100 W RFVII Inc. (104 Church St, Newfield, NJ 08344, United States) @ 13.56 MHz RF thermal plasma generator, a Navio matching network, intelligent feedback controller, and an 8-turn copper RF-ICP torch embedded in a 12 L thermochemical reactor. The intelligent feedback controller optimizes the thermal performance based on feedback signals from three online gas analyzers: CO, CO2 and NOx. The feedback controller output signal controls the RF thermal plasma torch current that provides real-time temperature control. The proposed reaction system achieves precise temperature profiles for both pyrolysis and gasification as well as increases end-product yield and eliminates undesired products such as tar and char. The identified hydrocarbon liquid mixture is 90 wt.% gasoline and 10 wt.%. diesel. The 8-turn RF-ICP thermal plasma torch has an average heating rate of +35 °C/min and a maximum operating temperature of 2000 °C and is able to sustain stable flame for more than 30 min. The reaction operating parameters are (550–990 °C = 30 min for pyrolysis and (1300 °C = 1 sec) for the gasification process. The identified hydrocarbon liquid products are 90 wt.% of a n-butyl-benzene (C6H5C4H9) and oluene (C7H8) mixture with less than 10 wt.% decane diesel fuel (C10 H22). Comsol simulation is used to assess the RF-ICP thermal plasma torch’s thermal performance. - 1 June 2017
- Published by AIP Publishing in Physics of Plasmas
- Vol. 24 (6) , 063302
Fast Faraday cup for fast ion beam TOF measurements in deuterium filled plasma focus device and correlation with Lee model
In this work, the design and construction of a 50 Ω fast Faraday cup and its results in correlation with the Lee Model Code for fast ion beam and ion time of flight measurements for a Deuterium filled plasma focus device are presented. Fast ion beam properties such as ion flux, fluence, speed, and energy at 2–8 Torr Deuterium are studied. The minimum 34 ns full width at half maximum ion signal at 12 kV, 3 Torr Deuterium in INTI PF was captured by a Faraday cup. The maximum ion energy of 67 ± 5 keV at 4 Torr Deuterium was detected by the Faraday cup. Ion time of flight measurements by the Faraday cup show consistent correlation with Lee Code results for Deuterium especially at near to optimum pressures.
- 1 June 2017
- Published by AIP Publishing in Physics of Plasmas
- Vol. 24 (6) , 063302
Fast Faraday cup for fast ion beam TOF measurements in deuterium filled plasma focus device and correlation with Lee model
In this work, the design and construction of a 50 Ω fast Faraday cup and its results in correlation with the Lee Model Code for fast ion beam and ion time of flight measurements for a Deuterium filled plasma focus device are presented. Fast ion beam properties such as ion flux, fluence, speed, and energy at 2–8 Torr Deuterium are studied. The minimum 34 ns full width at half maximum ion signal at 12 kV, 3 Torr Deuterium in INTI PF was captured by a Faraday cup. The maximum ion energy of 67 ± 5 keV at 4 Torr Deuterium was detected by the Faraday cup. Ion time of flight measurements by the Faraday cup show consistent correlation with Lee Code results for Deuterium especially at near to optimum pressures.