GMGrigory Markovsky

Grigory Markovsky

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Grigory Markovsky has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Technical-Typologic Characteristic of Microcores of the Cultural Horizon 3B of the Kovrizhka IV Site (Vitim River, Baikal-Pathom Uplands) with Application of Morphometry Based on 3D Modelling

    by А. В. Тетенькин, Г. И. Марковский

    Purpose. The study consists of results of a technical-typologic analysis of microcores and ski-spalls from 3B cultural horizon of the Kovrizhka IV site (Lower Vitim and Baikal-Pathom Uplands) with morphometric characteristics obtained by means of 3D modelling. This assemblage is dated to about 18.8 cal ka BP and refers to the early phase of the LUP. Production of microblades is represented by 5 microcores, 2 preforms, 3 ski-spalls, 174 whole and fragmented microblades. The aim of the study is to characterize the microblade splitting technology by new data of the variability of the microcore preparation.Results. The preforms for microcores were both bifaces and spalls. Ski-spalls indicate the presence of the technique of Yubetsu. For the first time in the region’s archeology the most diverse ways of manufacturing microcore, including the variants of transverse, parallel, and diagonal design of the striking platform relative to the longitudinal axis of the spall-preform have been revealed in one episode of habitat. It was established that the volume of microcores from biface in the initial stage is higher than the volume of micronucleus from the spall by 2-3 times.Conclusion. The variety of forms and ways of obtaining microcore is valued as a sure mastery of ancient masters of the technology of the microblade production. The Kovrizhka microcore technique is widely represented in subsequent assemblages of the Lower Vitim up to the early Holocene, similar final forms are also typical in the general context.

  • The Results of Experimental Microblade Pressure Flaking on Flint Raw Materials from the Altai Mountains

    by Svetlana Shnaider, Dmitry Gurulev, Autonomous Non-Commercial Organization “Siberian Archaeological Studies”, Saltanat Alisher Kyzy, Osh State University, Andrey Vishnevskiy, Kirill Kiryushin, Altai State University, Чжиюн Чжу, Xiaoqing Wang, et al.

    The article presents the results of experimental pressure flaking of flint aimed at the production of microliths. The raw materials used in the experiments are identical to those from the Neolithic and Mesolithic complexes of the Tytkesken-2, 3, 6 and Ust-Biyke-I sites in the Altai Mountains and come from the Katun river terraces at the mouth of the Tytkesken River. A total of 13 experiments were conducted. Seven of them, due to defects in raw materials, were concluded at the initial stages of knapping. A detailed attributive analysis was carried out for the cores and debitage collections. Also, at every stage of the utilization, the 3D-modeling of the cores was provided (from pre-forms to final form). As a result of the study, it was possible to document the complete sequence of core utilization, as well as morphometric signs of blanks and cores marking the pressure knapping.

  • Krasnobrodsky-1 – New Stone Age Site in the Kemerovo Region

    by Independent Researcher, A.A. Dudko, G.I. Markovsky, N.V. Glushko, Y.A. Vasilieva

    We present the data on Krasnobrodsky-1, a new archaeological heritage site from established in the course of archaeological survey in the summer of 2025 in the northern part of the Prokopyevsk municipal district of the Kemerovo region presumably dating to the Late Stone Age. The site is located far from other Late Paleolithic settlement sites in the Tom River basin. The site did not show any geomorphological features, and the terrain did not seem promising any potential for discovering archaeological sites – there are neither temporary or permanent watercourses, nor any clear signs of their existence in the past. The finds are not numerous, represented by flakes without retouch (3 flakes, 1 chip); the artifacts were associated with a layer of homogeneous gray-yellow loam; no signs of modern anthropogenic processes were noted. The stone artifacts are made of chalcedonic flint, which is fairly homogeneous but brittle. The artifacts show elongated proportions and bear mainly unidirectional negative scars on the dorsal surfaces. All flakes show traces of intensive reduction of the striking platform (removal of the overhang by a series of removals of various sizes). Despite the small amount of data derived, the stratigraphic context and the shape of the stone artifacts suggest attribution of the site to the Late Paleolithic period. In general, the site can be interpreted as a short time hunting and gathering camp, since the surrounding areas in watershed of the tributes of the Tom River have always been rich in wild fowl and small animals. It is also possible that the special trips in search of raw materials were made to the nearby spurs of the Salair Ridge, as suitable pebble raw materials could be found at a much greater distance. Excavations of the entire area (900 m²) of the short-term camp is required to provide information concerning the date and purpose of the site. At present, it is possible to completely excavate a site of this type, which seems typical, but providing important information on the daily life of Stone Age people.

  • Markansu III – a New Stone Age Site in the Eastern Pamirs

    by G.I. Markovskii, S.V. Shnaider, N.V. Glushko, Sh. Mirzoev

    In 2025, as part of the work of the Pamir Archaeological Team of the IAET SB RAS in the Gorno-Badakhshan Autonomous Region (Eastern Pamir, Republic of Tajikistan), a new archaeological site Markansu III was established. In the course of survey of the left side of the wide valley of the Koksoy River, archaeological material both separate and in clusters was recorded exposed on the top of a high moraine (50–70 m from the valley floor), 3. km northeast of the Oshkhona site. In total, 51 lithic artifacts were found. The collection contains the following artifact categories: cores (n = 3), core shards (n = 2), flakes (n = 41), debris (n = 4), a tool with double-sided processing on a blade (n = 1). The surface of the artifacts bears clearly visible traces of surface abrasion. The site of Markansu III is a short-term site stone raw materials were collected where in antiquity, tested and knapped in order to get large and thick blanks (possibly core-preforms) as well as blanks for the making tools on site. The findings of 2025 show great similarity to the Oshkhona industry of large-scale spalls and surface collections from Markansu I and II. By analogy with the materials of the above sites, the collection of lithic artifacts from Markansu III can be dated to the Early Holocene period. Since archaeological work in the valleys of the Koksoy and Markansu Rivers has not been carried out for almost 50 years, the discovery of a new site can be considered as a good start for the next stage of research in this area based on a modern integrated approach involving scientific methods.

  • Study of the Tepakul-5 Site (Zaravshan Range, Uzbekistan) during the 2025 Field Season

    by S.V. Shnaider, N.U. Kholmatov, G.I. Markovsky

    The Zeravshan Range, particularly its northern slopes, is an essential region for studying the Neolithization processes in Central Asia. Active field investigations of Mesolithic and Neolithic sites have been carried out here for over a century under the leadership of D.N. Lev, M.D. Dzhurakulov, and N.U. Kholmatov. As a result of these studies, the Neolithic sites in the area were classified into the Sazagan Neolithic culture. During the 2025 archaeological fieldwork, excavations continued at the Tepakul-5 site, located in the valley having the same name. The excavations were conducted over an area of 15 sq. m, with the main excavation reaching the depth of 2 m and the control trench in one square reaching the depth of 4.4 m. The site revealed four stratigraphic units, differing in lithological composition and concentration of archaeological materials. The first layer had been disturbed by anthropogenic activity, and a part of a structure made of granitoid blocks was identified at its base. The second layer yielded the highest number of finds (269 items), including stone artifacts, ceramic fragments, animal bones, mollusk shells, and isolated plant seeds. The third layer contained a few stone artifacts located in the layer top, likely introduced through bioturbation. Typological analysis of the lithic industry from the second layer indicates the use of prismatic and terminal flaking techniques aimed at producing blades and microblades. The tool assemblage is dominated by chisel-like implements and retouched microblades. The materials from Tepakul-5 show strong typological parallels with those from Tepakul-1 through Tepakul-4.

  • Open Access

    The results of re-examination of the Neolithic materials from the Ak-Tangi site (northern Tajikistan)

    by S.V. Shnaider, А.к. Kasparov, Т.G. Filimonova, G.I. Markovskii, S.V. Baranova, А.а. Chernonosov, V.V. Koval, А.YU. Fedorchenko

    The paper reports on the results of reinterpretation of the Neolithic complexes of Hissar I–IV of the Ak-Tangi site, a field study of which was carried out in the middle of the 20th century. At the time of its discovery, only the Hissar Neolithic Culture had been studied in the mountainous part of Central Asia, which the Ak-Tangi materials were attributed to. At the new stage of the research, a comprehensive analysis of the archival materials and sur-viving collection, which comprises palaeofaunal materia and lithic and bone artefacts, was performed, and radio-carbon dating and ZooMS-analysis were employed on some of the bone artefacts.

  • Using Three-Dimensional Modeling for Reconstructing a Polished Stone Tool

    by Institute of Archaeology and Ethnography SB RAS, G.I. Markovskiy, N.V. Glushko, Independent Researcher

    The methods of 3D modeling have been increasingly used in archaeology, making it possible to comprehensively analyze individual artifacts at a new level of accuracy and create a basis for statistical comparison between large groups of objects. This article describes application of 3D modeling methods to reconstructing a polished stone tool. During processing of the Neolithic evidence from the Ruchei Smolokurnyi site (Northern Angara Region), it was noticed that after breakage, polished tools (adzes, axes, or pestles) were always remodeled into other items, such as scrapers, planers, chisel-like tools, bifaces, and even cores. One of large chisel-like tools has preserved numerous spots of polished surface after remodeling. In the process of working with a high-precision 3D copy of this stone artifact, a number of cross-sections intersecting the remains of the polished surface were made. All known large polished items from that site were longitudinally symmetrical. The method of mirror symmetry was applied, which increased the area of the polished surface on the reconstructed object. By analyzing the original and mirrored sections, it was possible to determine the main features of the original tool. It had asymmetry in profile relative to the longitudinal axis. One side was more convex with a weakly distinguished longitudinal rib in the center. The other side was flatter, less convex, with more thorough polishing extending to the longitudinal edges. After analyzing the images and comparing them with a series of cross-sections of morphologically similar intact items, the original polished tool was identified as adze. Thus, the methods of 3D modeling have made it possible to reconstruct the type and supposed appearance of the original polished tool.

  • Research of Knapping Techniques by Three-Dimensional Modeling Methods (Evidence from the Obishir-5 Site, Kyrgyzstan)

    by Institute of Archaeology and Ethnography SB RAS, G.I. Markovskiy, S. Alisher Kyzy, Osh State University, N.V. Glushko, Independent Researcher, A. Abdykanova, American University in Central Asia, S.V. Shnaider

    This article discusses the application of 3D modeling methods for analyzing the collection of cores from the Obishir-5 site (Fergana Valley, Southwestern Kyrgyzstan). Using literature and archaeological evidence, the team of authors has developed a list of criteria for determining the pressure and percussion knapping techniques thus making it possible to attribute most of the cores (63 pcs.) from the collection of the Obishir-5 site to one of the two techniques and to divide the artifacts into two respective groups. One of the main criteria – average value of the angle between the striking platform and flaking surface – was calculated exclusively by using the three-dimensional modeling methods. The study also intended to establish which other morphometric characteristics would be helpful for analyzing and identifying various knapping techniques. The following parameters were calculated using the scaled high-precision 3D models of cores (41 pcs.): length, width, and height of the core; height and width of the splitting surface; degree of convexity on the profile of the splitting surface, and degree of convexity of the platform edge. While the values of length-towidth ratio and front height-to-width ratio were similar in the cores of both groups, differences have been discovered in the indices of convexity of the front profile and especially in the values of convexity of the platform edge. The similarities in proportions can be explained by common prismatic and subprismatic cores of slightly elongated proportions with wide and low flaking surface in both groups. However, the sizes of the typologically similar “pressure” and “percussion” cores were different, as indicated by significant difference in volume. The convexity of the working surface in plan and profile turned out to be the sign of pressure techniques in the lithic industries from the site.

  • Surface Collection near the Bobkovo Village of the Altai Kray during the 2024 Survey

    by Institute of Archaeology and Ethnography SB RAS, G.I. Markovskii, N.V. Glushko, Independent Researcher

    In the 2024 field season near the Bobkovo village (Rubtsovsky District, Altai Kray), an archaeology survey was conducted. During the survey, signs of human presence in the area during the Neolithic were found. This part of the valley of the Aley River was chosen for the study because of its similarity to the location of the Rubtsovskoye site. According to the planographic and geomorphological contexts of artifacts found at the site, people in the Neolithic preferred to settle in the immediate vicinity of the Aley River, its channels and small lakes. Based by the finds from the Rubtsovskoye site, their main occupation was fishing. The site is presently located on the shore of an old lake, which was not destroyed by the Aley River during its multiple changes. The Bobkovo village is located on the bank of a similar old lake on the right side of the Aley River valley; the terrace section here has a flat relief and a convenient southern exposure. During the inspection of a many different exposures along the lake and on the terrace site, a small amount of archaeological material was found: a core-like fragment, debitage without retouche (blades – 7 specimens, flakes – 5 specimens), and an undecorated ceramic vessel fragment. Laminar flakes are comparable to the Neolithic materials from the region in terms of morphology and raw material composition. A flake found in the bank cliff has slightly smoothed edges and may be close to the materials discovered west of the Bobkovo village in 1964, preliminarily dated to the Paleolithic. Signs of human activity were recorded during the survey, although the small number of the collected artifacts and the lack of a clear archaeological context make it impossible to identify a part of the terrace as a site or settlement. The surveyed areas are likely to be located too high and too far from the water, and they were not comfortable enough for the long-term habitation of social groups in the Final Stone Age.

  • Preliminary Results of Archaeological Excavations at the Yugachi-2 Site in the Askiz River Valley in the Republic of Khakassia in 2021

    by Institute of Archaeology and Ethnography SB RAS, A.A. Timoshchenko, D.A. Bychkov, G.I. Markovsky, V.V. Akhmetov, M.S. Kishkurno

    The antiquities of the Minusinsk Basin have been attracting the attention of researchers for several centuries. During this time, a significant amount of information has been accumulated about the funeral practices of the population. But due to the small number of identified settlement and short-term camp sites in this territory, the economic aspects of the life of ancient communities remain much less studied. The increase in the number of established settlements is associated with the development of the practice of conducting state historical and cultural expertise within the rescue archaeology program. As a result of these activities, the Yugachi-2 site was discovered. Large-scale archaeological excavations made it possible to trace the variability of the stratigraphic situation at the site, identify the relevant reasons and thereby explain the variability of the stratigraphic position of the archaeological found materials. The cultural layer in the studied area of the site represented a variety of object complexes: a large medieval complex and solitary objects and areas of concentration of finds related to the early Iron Age and the Bronze Age. It is explainable by various economic systems practiced by the site populations during various historical periods. This is due to the changeable cultural situation in the region: migration processes caused by large-scale military conflicts, climatic fluctuations, and trade relationships between the inhabitants of the taiga and steppe zones. The archaeological excavations at Yugachi-2 provided comprehensive information about the ceramic production, bone carving and other economic activities of its inhabitants. A wide range of parallels to the discovered pottery includes not only the contiguous Gornaya, but extends to the north till the lower Angara River. The derived data provide information on the lifestyle and economy of the population and prove indirectly some historical scenarios of the historical and cultural development of this area described by previous researchers.