N.V. Glushko
Research Subjects
N.V. Glushko has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Grigory Markovsky
Institute of Archaeology and Ethnography of the Siberian Branch of the Russian Academy of Sciences
5 shared publications Independent Researcher
5 shared publicationsInstitute of Archaeology and Ethnography SB RAS
4 shared publications- Svetlana V. Shnaider
Institute of Archaeology and Ethnography, Siberian Branch of the Russian Academy of Sciences
2 shared publications - A.A. Dudko1 shared publication
- Aida Abdykanova
American University of Central Asia, Bishkek, Kyrgyzstan
1 shared publication
Latest Publications
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 107-112
Krasnobrodsky-1 – New Stone Age Site in the Kemerovo Region
We present the data on Krasnobrodsky-1, a new archaeological heritage site from established in the course of archaeological survey in the summer of 2025 in the northern part of the Prokopyevsk municipal district of the Kemerovo region presumably dating to the Late Stone Age. The site is located far from other Late Paleolithic settlement sites in the Tom River basin. The site did not show any geomorphological features, and the terrain did not seem promising any potential for discovering archaeological sites – there are neither temporary or permanent watercourses, nor any clear signs of their existence in the past. The finds are not numerous, represented by flakes without retouch (3 flakes, 1 chip); the artifacts were associated with a layer of homogeneous gray-yellow loam; no signs of modern anthropogenic processes were noted. The stone artifacts are made of chalcedonic flint, which is fairly homogeneous but brittle. The artifacts show elongated proportions and bear mainly unidirectional negative scars on the dorsal surfaces. All flakes show traces of intensive reduction of the striking platform (removal of the overhang by a series of removals of various sizes). Despite the small amount of data derived, the stratigraphic context and the shape of the stone artifacts suggest attribution of the site to the Late Paleolithic period. In general, the site can be interpreted as a short time hunting and gathering camp, since the surrounding areas in watershed of the tributes of the Tom River have always been rich in wild fowl and small animals. It is also possible that the special trips in search of raw materials were made to the nearby spurs of the Salair Ridge, as suitable pebble raw materials could be found at a much greater distance. Excavations of the entire area (900 m²) of the short-term camp is required to provide information concerning the date and purpose of the site. At present, it is possible to completely excavate a site of this type, which seems typical, but providing important information on the daily life of Stone Age people.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 107-112
Krasnobrodsky-1 – New Stone Age Site in the Kemerovo Region
We present the data on Krasnobrodsky-1, a new archaeological heritage site from established in the course of archaeological survey in the summer of 2025 in the northern part of the Prokopyevsk municipal district of the Kemerovo region presumably dating to the Late Stone Age. The site is located far from other Late Paleolithic settlement sites in the Tom River basin. The site did not show any geomorphological features, and the terrain did not seem promising any potential for discovering archaeological sites – there are neither temporary or permanent watercourses, nor any clear signs of their existence in the past. The finds are not numerous, represented by flakes without retouch (3 flakes, 1 chip); the artifacts were associated with a layer of homogeneous gray-yellow loam; no signs of modern anthropogenic processes were noted. The stone artifacts are made of chalcedonic flint, which is fairly homogeneous but brittle. The artifacts show elongated proportions and bear mainly unidirectional negative scars on the dorsal surfaces. All flakes show traces of intensive reduction of the striking platform (removal of the overhang by a series of removals of various sizes). Despite the small amount of data derived, the stratigraphic context and the shape of the stone artifacts suggest attribution of the site to the Late Paleolithic period. In general, the site can be interpreted as a short time hunting and gathering camp, since the surrounding areas in watershed of the tributes of the Tom River have always been rich in wild fowl and small animals. It is also possible that the special trips in search of raw materials were made to the nearby spurs of the Salair Ridge, as suitable pebble raw materials could be found at a much greater distance. Excavations of the entire area (900 m²) of the short-term camp is required to provide information concerning the date and purpose of the site. At present, it is possible to completely excavate a site of this type, which seems typical, but providing important information on the daily life of Stone Age people.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 174-180
Markansu III – a New Stone Age Site in the Eastern Pamirs
In 2025, as part of the work of the Pamir Archaeological Team of the IAET SB RAS in the Gorno-Badakhshan Autonomous Region (Eastern Pamir, Republic of Tajikistan), a new archaeological site Markansu III was established. In the course of survey of the left side of the wide valley of the Koksoy River, archaeological material both separate and in clusters was recorded exposed on the top of a high moraine (50–70 m from the valley floor), 3. km northeast of the Oshkhona site. In total, 51 lithic artifacts were found. The collection contains the following artifact categories: cores (n = 3), core shards (n = 2), flakes (n = 41), debris (n = 4), a tool with double-sided processing on a blade (n = 1). The surface of the artifacts bears clearly visible traces of surface abrasion. The site of Markansu III is a short-term site stone raw materials were collected where in antiquity, tested and knapped in order to get large and thick blanks (possibly core-preforms) as well as blanks for the making tools on site. The findings of 2025 show great similarity to the Oshkhona industry of large-scale spalls and surface collections from Markansu I and II. By analogy with the materials of the above sites, the collection of lithic artifacts from Markansu III can be dated to the Early Holocene period. Since archaeological work in the valleys of the Koksoy and Markansu Rivers has not been carried out for almost 50 years, the discovery of a new site can be considered as a good start for the next stage of research in this area based on a modern integrated approach involving scientific methods.
- 1 January 2025
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 31, 174-180
Markansu III – a New Stone Age Site in the Eastern Pamirs
In 2025, as part of the work of the Pamir Archaeological Team of the IAET SB RAS in the Gorno-Badakhshan Autonomous Region (Eastern Pamir, Republic of Tajikistan), a new archaeological site Markansu III was established. In the course of survey of the left side of the wide valley of the Koksoy River, archaeological material both separate and in clusters was recorded exposed on the top of a high moraine (50–70 m from the valley floor), 3. km northeast of the Oshkhona site. In total, 51 lithic artifacts were found. The collection contains the following artifact categories: cores (n = 3), core shards (n = 2), flakes (n = 41), debris (n = 4), a tool with double-sided processing on a blade (n = 1). The surface of the artifacts bears clearly visible traces of surface abrasion. The site of Markansu III is a short-term site stone raw materials were collected where in antiquity, tested and knapped in order to get large and thick blanks (possibly core-preforms) as well as blanks for the making tools on site. The findings of 2025 show great similarity to the Oshkhona industry of large-scale spalls and surface collections from Markansu I and II. By analogy with the materials of the above sites, the collection of lithic artifacts from Markansu III can be dated to the Early Holocene period. Since archaeological work in the valleys of the Koksoy and Markansu Rivers has not been carried out for almost 50 years, the discovery of a new site can be considered as a good start for the next stage of research in this area based on a modern integrated approach involving scientific methods.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 165-171
Using Three-Dimensional Modeling for Reconstructing a Polished Stone Tool
The methods of 3D modeling have been increasingly used in archaeology, making it possible to comprehensively analyze individual artifacts at a new level of accuracy and create a basis for statistical comparison between large groups of objects. This article describes application of 3D modeling methods to reconstructing a polished stone tool. During processing of the Neolithic evidence from the Ruchei Smolokurnyi site (Northern Angara Region), it was noticed that after breakage, polished tools (adzes, axes, or pestles) were always remodeled into other items, such as scrapers, planers, chisel-like tools, bifaces, and even cores. One of large chisel-like tools has preserved numerous spots of polished surface after remodeling. In the process of working with a high-precision 3D copy of this stone artifact, a number of cross-sections intersecting the remains of the polished surface were made. All known large polished items from that site were longitudinally symmetrical. The method of mirror symmetry was applied, which increased the area of the polished surface on the reconstructed object. By analyzing the original and mirrored sections, it was possible to determine the main features of the original tool. It had asymmetry in profile relative to the longitudinal axis. One side was more convex with a weakly distinguished longitudinal rib in the center. The other side was flatter, less convex, with more thorough polishing extending to the longitudinal edges. After analyzing the images and comparing them with a series of cross-sections of morphologically similar intact items, the original polished tool was identified as adze. Thus, the methods of 3D modeling have made it possible to reconstruct the type and supposed appearance of the original polished tool.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 165-171
Using Three-Dimensional Modeling for Reconstructing a Polished Stone Tool
The methods of 3D modeling have been increasingly used in archaeology, making it possible to comprehensively analyze individual artifacts at a new level of accuracy and create a basis for statistical comparison between large groups of objects. This article describes application of 3D modeling methods to reconstructing a polished stone tool. During processing of the Neolithic evidence from the Ruchei Smolokurnyi site (Northern Angara Region), it was noticed that after breakage, polished tools (adzes, axes, or pestles) were always remodeled into other items, such as scrapers, planers, chisel-like tools, bifaces, and even cores. One of large chisel-like tools has preserved numerous spots of polished surface after remodeling. In the process of working with a high-precision 3D copy of this stone artifact, a number of cross-sections intersecting the remains of the polished surface were made. All known large polished items from that site were longitudinally symmetrical. The method of mirror symmetry was applied, which increased the area of the polished surface on the reconstructed object. By analyzing the original and mirrored sections, it was possible to determine the main features of the original tool. It had asymmetry in profile relative to the longitudinal axis. One side was more convex with a weakly distinguished longitudinal rib in the center. The other side was flatter, less convex, with more thorough polishing extending to the longitudinal edges. After analyzing the images and comparing them with a series of cross-sections of morphologically similar intact items, the original polished tool was identified as adze. Thus, the methods of 3D modeling have made it possible to reconstruct the type and supposed appearance of the original polished tool.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 159-164
Research of Knapping Techniques by Three-Dimensional Modeling Methods (Evidence from the Obishir-5 Site, Kyrgyzstan)
This article discusses the application of 3D modeling methods for analyzing the collection of cores from the Obishir-5 site (Fergana Valley, Southwestern Kyrgyzstan). Using literature and archaeological evidence, the team of authors has developed a list of criteria for determining the pressure and percussion knapping techniques thus making it possible to attribute most of the cores (63 pcs.) from the collection of the Obishir-5 site to one of the two techniques and to divide the artifacts into two respective groups. One of the main criteria – average value of the angle between the striking platform and flaking surface – was calculated exclusively by using the three-dimensional modeling methods. The study also intended to establish which other morphometric characteristics would be helpful for analyzing and identifying various knapping techniques. The following parameters were calculated using the scaled high-precision 3D models of cores (41 pcs.): length, width, and height of the core; height and width of the splitting surface; degree of convexity on the profile of the splitting surface, and degree of convexity of the platform edge. While the values of length-towidth ratio and front height-to-width ratio were similar in the cores of both groups, differences have been discovered in the indices of convexity of the front profile and especially in the values of convexity of the platform edge. The similarities in proportions can be explained by common prismatic and subprismatic cores of slightly elongated proportions with wide and low flaking surface in both groups. However, the sizes of the typologically similar “pressure” and “percussion” cores were different, as indicated by significant difference in volume. The convexity of the working surface in plan and profile turned out to be the sign of pressure techniques in the lithic industries from the site.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 159-164
Research of Knapping Techniques by Three-Dimensional Modeling Methods (Evidence from the Obishir-5 Site, Kyrgyzstan)
This article discusses the application of 3D modeling methods for analyzing the collection of cores from the Obishir-5 site (Fergana Valley, Southwestern Kyrgyzstan). Using literature and archaeological evidence, the team of authors has developed a list of criteria for determining the pressure and percussion knapping techniques thus making it possible to attribute most of the cores (63 pcs.) from the collection of the Obishir-5 site to one of the two techniques and to divide the artifacts into two respective groups. One of the main criteria – average value of the angle between the striking platform and flaking surface – was calculated exclusively by using the three-dimensional modeling methods. The study also intended to establish which other morphometric characteristics would be helpful for analyzing and identifying various knapping techniques. The following parameters were calculated using the scaled high-precision 3D models of cores (41 pcs.): length, width, and height of the core; height and width of the splitting surface; degree of convexity on the profile of the splitting surface, and degree of convexity of the platform edge. While the values of length-towidth ratio and front height-to-width ratio were similar in the cores of both groups, differences have been discovered in the indices of convexity of the front profile and especially in the values of convexity of the platform edge. The similarities in proportions can be explained by common prismatic and subprismatic cores of slightly elongated proportions with wide and low flaking surface in both groups. However, the sizes of the typologically similar “pressure” and “percussion” cores were different, as indicated by significant difference in volume. The convexity of the working surface in plan and profile turned out to be the sign of pressure techniques in the lithic industries from the site.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 172-177
Surface Collection near the Bobkovo Village of the Altai Kray during the 2024 Survey
In the 2024 field season near the Bobkovo village (Rubtsovsky District, Altai Kray), an archaeology survey was conducted. During the survey, signs of human presence in the area during the Neolithic were found. This part of the valley of the Aley River was chosen for the study because of its similarity to the location of the Rubtsovskoye site. According to the planographic and geomorphological contexts of artifacts found at the site, people in the Neolithic preferred to settle in the immediate vicinity of the Aley River, its channels and small lakes. Based by the finds from the Rubtsovskoye site, their main occupation was fishing. The site is presently located on the shore of an old lake, which was not destroyed by the Aley River during its multiple changes. The Bobkovo village is located on the bank of a similar old lake on the right side of the Aley River valley; the terrace section here has a flat relief and a convenient southern exposure. During the inspection of a many different exposures along the lake and on the terrace site, a small amount of archaeological material was found: a core-like fragment, debitage without retouche (blades – 7 specimens, flakes – 5 specimens), and an undecorated ceramic vessel fragment. Laminar flakes are comparable to the Neolithic materials from the region in terms of morphology and raw material composition. A flake found in the bank cliff has slightly smoothed edges and may be close to the materials discovered west of the Bobkovo village in 1964, preliminarily dated to the Paleolithic. Signs of human activity were recorded during the survey, although the small number of the collected artifacts and the lack of a clear archaeological context make it impossible to identify a part of the terrace as a site or settlement. The surveyed areas are likely to be located too high and too far from the water, and they were not comfortable enough for the long-term habitation of social groups in the Final Stone Age.
- 1 January 2024
- Published by Institute of Archaeology and Ethnography SB RAS in Problems of Archaeology, Ethnography, Anthropology of Siberia and Neighboring Territories
- Vol. 30, 172-177
Surface Collection near the Bobkovo Village of the Altai Kray during the 2024 Survey
In the 2024 field season near the Bobkovo village (Rubtsovsky District, Altai Kray), an archaeology survey was conducted. During the survey, signs of human presence in the area during the Neolithic were found. This part of the valley of the Aley River was chosen for the study because of its similarity to the location of the Rubtsovskoye site. According to the planographic and geomorphological contexts of artifacts found at the site, people in the Neolithic preferred to settle in the immediate vicinity of the Aley River, its channels and small lakes. Based by the finds from the Rubtsovskoye site, their main occupation was fishing. The site is presently located on the shore of an old lake, which was not destroyed by the Aley River during its multiple changes. The Bobkovo village is located on the bank of a similar old lake on the right side of the Aley River valley; the terrace section here has a flat relief and a convenient southern exposure. During the inspection of a many different exposures along the lake and on the terrace site, a small amount of archaeological material was found: a core-like fragment, debitage without retouche (blades – 7 specimens, flakes – 5 specimens), and an undecorated ceramic vessel fragment. Laminar flakes are comparable to the Neolithic materials from the region in terms of morphology and raw material composition. A flake found in the bank cliff has slightly smoothed edges and may be close to the materials discovered west of the Bobkovo village in 1964, preliminarily dated to the Paleolithic. Signs of human activity were recorded during the survey, although the small number of the collected artifacts and the lack of a clear archaeological context make it impossible to identify a part of the terrace as a site or settlement. The surveyed areas are likely to be located too high and too far from the water, and they were not comfortable enough for the long-term habitation of social groups in the Final Stone Age.
- Open Access
- 1 September 2023
- Published by Altai State University in Teoriya i praktika arkheologicheskikh issledovaniy
- Vol. 35 (3) , 65-78
NEW ARCHAEOLOGICAL SITE OF THE FINAL STONE AGE — KURSAK-1 IN THE LOWER REACHES OF THE KATUN RIVER (ALTAI MOUNTAINS)
The article presents the results of investigations aimed to discover Mesolithic and Neolithic sites in the Katun River valley in its lower reaches (Altai Republic, Chemalsky District). The research was carried out in 2022 by IAET SB RAS team and as a result, an archaeological object — Kursak-1 site — was discovered on the left bank of the Katun river in the estuary of the Karasu creek. During the inspection of the terrace from the surface we collected numerous archaeological material (274 stone artifacts, 3 small fragments of pottery). To determine the stratigraphic context of the deposits, a test pit was excavated; it revealed: 4 lithological layers, 2 cultural horizons, where 113 stone artifacts and 2 undisturbed objects (fire place and pit) were found. Blades are few, nuclei for blades and microblades are singular. There are also single specimens from the category of tools. About 80% of all stone artifacts are made from local raw materials, which are characterized by fracturing and heterogeneity, but were easily accessible. It is possible that a large number of amorphous flakes are associated with preparatory cleavage, when preforms were created. The results of the investigations indicate an active use of the site in ancient period, possibly as a workshop. At the present time, we can assume that the archaeological materials of horizon 2 belong to the Final Mesolithic, horizon 1 — to a later stage of the Final Stone Age.
- 1 September 2023
- Published by Altai State University in Teoriya i praktika arkheologicheskikh issledovaniy
- Vol. 35 (3) , 65-78
Open AccessNEW ARCHAEOLOGICAL SITE OF THE FINAL STONE AGE — KURSAK-1 IN THE LOWER REACHES OF THE KATUN RIVER (ALTAI MOUNTAINS)
The article presents the results of investigations aimed to discover Mesolithic and Neolithic sites in the Katun River valley in its lower reaches (Altai Republic, Chemalsky District). The research was carried out in 2022 by IAET SB RAS team and as a result, an archaeological object — Kursak-1 site — was discovered on the left bank of the Katun river in the estuary of the Karasu creek. During the inspection of the terrace from the surface we collected numerous archaeological material (274 stone artifacts, 3 small fragments of pottery). To determine the stratigraphic context of the deposits, a test pit was excavated; it revealed: 4 lithological layers, 2 cultural horizons, where 113 stone artifacts and 2 undisturbed objects (fire place and pit) were found. Blades are few, nuclei for blades and microblades are singular. There are also single specimens from the category of tools. About 80% of all stone artifacts are made from local raw materials, which are characterized by fracturing and heterogeneity, but were easily accessible. It is possible that a large number of amorphous flakes are associated with preparatory cleavage, when preforms were created. The results of the investigations indicate an active use of the site in ancient period, possibly as a workshop. At the present time, we can assume that the archaeological materials of horizon 2 belong to the Final Mesolithic, horizon 1 — to a later stage of the Final Stone Age.