Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lukasz Jan Niewiara has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Computationally Efficient Gradient Enhanced FCS-MPCC With Reduced Torque Ripple for a Reluctance Synchronous Motor Drive

    by Łukasz J. Niewiara, Robert Surus, Tomasz Tarczewski

    The article presents a gradient enhanced finite control set model predictive current control (GE-FCS-MPCC) strategy for reluctance synchronous motor (RSM) drives. The proposed control method includes gradient optimization of the cost function to improve the operation performance of the drive system. The assumed mathematical model includes the effects of magnetic self- and cross-saturation of the RSM. The algorithm was implemented on a prototype drive system featuring an ARM-Cortex microprocessor and a SiC-based voltage source inverter. Experimental results demonstrate the superior performance of the GE-FCS-MPCC compared with the standard FCS-MPCC and FCS-MPTC, particularly in terms of reduced torque ripples, without deterioration of response dynamics. As a result of the two-stage optimization, an optimal control subspace is obtained with an analytically proven cost function minimum. The proposed solution exhibits good performance with a low computational burden. The impact of the flux/inductance estimation error and measurement time delay is investigated. The experimental results prove the robustness of the proposed control system and its superiority compared with the classical FCS-MPCC and FCS-MPTC schemes.


  • An Energy-Efficient Torque Optimization Strategy With Field Weakening for a State Feedback Controller With Synchronous Reluctance Motor Drive

    by Łukasz J. Niewiara, Michal Gierczyński, Tomasz Tarczewski, Lech M. Grzesiak

    A trend for developing synchronous reluctance motors (SynRMs)-based drive systems is observed in the industry due to their simple and robust construction, with no rare Earth elements (REEs). These machines offer high efficiency and are based on easily available materials. Designing an energy-efficient control strategy is nontrivial because of the magnetic saturation phenomenon in the iron-based rotor. Outstanding dynamic drive performance can be achieved by applying a constrained full-state feedback controller (SFC). However, this structure cannot employ classical torque maximization strategies, leading to poor efficiency. Thus, a customized torque maximization strategy has to be designed for SFC-based angular velocity control systems to enable energy-efficient operation. An original torque maximization strategy for a SynRM drive is proposed for the SFC structure. Maximum torque operation is ensured by applying a customized torque maximization unit (TMU) with maximum torque per ampere (MTPA) and field weakening (FW) operation. MTPA is based on a precalculated trajectory using the machine’s model, implemented using an offline-trained artificial neural network; meanwhile, FW is based on a machine parameter-free approach with current phase shifting (CPS). The robustness of the CPS was analytically confirmed based on a small-signal analysis. The experimental results obtained confirm energy-efficient and stable operation of the system for both the MTPA and the FW operations. The proposed SFC-TMU structure is compared to a state-of-the-art lookup table (LUT)-based field-oriented control (FOC) cascade control structure (CCS). The given torque maximization trajectory is properly tracked and reveals superior efficiency, outperforming a classical LUT-based FOC-CCS strategy.


  • Torque Control of a Highly-Saturated IPMSM Drive Using the Flux Linkage Control Scheme and an Augmented-State-Feedback Controller

    by M. Gierczynski, L. J. Niewiara, R. Jakubowski, M. Seredynski, M. Jaworski, E. Kupiec, L. M. Grzesiak

    Torque control performance is essential in propulsion control systems, especially in automotive applications. Together with torque maximization, it becomes a desirable feature to ensure efficient operation of the drive system. At high power density, the phenomenon of self and cross-saturation occurs in the controlled machine, revealing torque and performance deterioration if not considered. Hence, this article proposes a novel approach for torque control of an interior permanent magnet synchronous motor (IPMSM) based on an augmented state-feedback controller (ASFC) with flux-linkage control. The proposed approach, in contrast to classical PI-based current control systems, allows for simplification of the plant’s mathematical description. As a result, a stationary, linear controller may be designed. The mathematical model of the assumed machine (Toyota Prius 4rd generation) is provided with a torque maximization approach. The ASFC structure and synthesis procedure are discussed in detail. The experimental results indicate excellent torque tracking performance and wide torque control bandwidth of the proposed ASFC.


  • Open Access

    Identification of the Parameters of the Highly Saturated Permanent Magnet Synchronous Motor (PMSM): Selected Problems of Accuracy

    by Michal Gierczynski, Rafal Jakubowski, Emil Kupiec, Lukasz Jan Niewiara, Tomasz Tarczewski, Lech M. Grzesiak

    Machines with highly saturated magnetic circuits are utilized to maximize drive efficiency. However, their control is non-trivial due to highly non-linear characteristics, and therefore, an accurate parameter identification procedure is crucial. This paper presents and validates a comprehensive flux linkage identification procedure. Several steps needed for accurate parameter identification and their influence on the estimation results are described. The impact of all main parts of the electrical drive, i.e., dead times introduced between switching off and switching on the power transistors, phase delay from the current low-pass filters, delay from the control system, and misalignment of the d–axis angle due to the machine asymmetries is considered and partially eliminated. An improved identification procedure with the look-up table-based dead time compensation and estimation of equivalent circuit resistance is applied to estimate the parameters of the highly saturated PMSM traction machine from the fourth generation of the Toyota Prius, and the obtained results are compared with a Finite Element Method-based model of this machine. Finally, dynamic test results are conducted to prove the proposed approach’s accuracy.


  • Open Access

    Takotsubo cardiomyopathy in patients with borderline stenosis of the left anterior descending artery and vasospastic angina: to stent or not to stent? A case report

    by Anna Bernacik, Łukasz Niewiara, Piotr Szolc, Jacek Legutko, Bartłomiej Guzik

    Background: Takotsubo cardiomyopathy (TCM) is a complex disease that resembles the clinical presentation of acute myocardial infarction with non-obstructive coronary arteries. The aetiology remains elusive despite the comprehensive nature of current guidelines meticulously detailing the diagnostic process. Case summary: We present the case of a 64-year-old female who presented with a clinical profile consistent with non-ST elevation myocardial infarction, confirmed by elevated cardiac enzyme levels. Echocardiography raised suspicions of TCM. Angiography presented a challenge, revealing a 65% stenosis of the left anterior descending artery (LAD). Based on the collected evidence, we decided to delay and ultimately forgo LAD revascularization while identifying epicardial vasospasm through a provocation test as a possible cause underlying TCM. Discussion: Conducting an acetylcholine provocation test, as recommended by the European Society of Cardiology guidelines for patients with ischaemia and no obstructive coronary artery disease unveiled severe diffuse vasospasm affecting both the LAD and circumflex arteries. The intricate interplay of pathophysiological mechanisms and clinical presentations necessitates ongoing exploration to uncover the mysteries and refine our diagnostic and therapeutic strategies.


  • Open Access

    Dynamic modeling and identification of a reluctance synchronous machine parameters

    by Łukasz J. Niewiara, Michał Gierczyński, Tomasz Tarczewski, Lech M. Grzesiak

    This article discusses an identification and modeling approach of a reluctance synchronous motor (RSM) based on the running rotor technique. The applied flux linkage approximation functions reflect the self-saturation and cross-saturation effects, and the applied mathematical model is continuous and differentiable. The proper design of the experiment is discussed, and relevant recommendations are made to ensure the mitigation of procedural mistakes in the experiments. A detailed analysis of the impact of configuration faults on the obtained experimental data is provided, considering distortions in the obtained flux linkage and inductance surfaces. Considering the achieved model accuracy, a novel model evaluation considering the achieved model accuracy technique based on transient current response is proposed.


  • Designing a Hybrid State Feedback Control Structure for a Drive With a Reluctance Synchronous Motor

    by Lukasz J. Niewiara, Tomasz Tarczewski, Michal Gierczynski, Lech M. Grzesiak

    Drives with a reluctance synchronous motor (RSM) are currently being intensively developed due to the simple construction and easily available materials used for their construction. These machines are also characterized by high efficiency. Designing a control system is not trivial due to the nonlinearity of the model describing this motor. In order to simplify the mathematical model of RSM, a linearization technique based on the lumped perturbation approach was proposed. A modified mathematical description of flux surface and inductance was proposed and applied. An original hybrid state feedback control (SFC) structure of a drive with a reluctance synchronous motor has been proposed. In the range of admissible changes of state variables, the regulator operates in the linear region and has the structure of an SFC. When the state variable limits (maximum values) are reached, the control structure performs predictive control to maintain the limit values. The synthesis of the control structure is described in detail. The proposed control structure is experimentally compared with a cascade control and model predictive one. The obtained results indicate a similar dynamical behavior and much better load torque compensation obtained for hybrid SFC. The proposed approach assures precise limitation of state variables resulting safe operation of the drive.


  • Open Access

    Improved Fixed-Frequency SOGI Based Single-Phase PLL

    by Djordje Stojic, Tomasz Tarczewski, Lukasz J. Niewiara, Lech M. Grzesiak

    In this paper, an improved single-phase second order generalized integrator (SOGI) fixed-frequency phase-locked loop (FFPLL) is presented. The proposed improvement comprises the modification of the PLL input signal estimated phase angle correction factor, which is in this paper calculated and implemented with the exactly accurate value, while in the existing literature the approximated correction value is employed. Also, in this paper, the FFPLL with DC offset is presented, together with the corresponding estimated angle correction technique. Furthermore, the PLL with the positive sequence separation is outlined, based on the new FFPLL structure. The proposed technique is analyzed and verified by simulation and experimental runs, which proved the accuracy and efficiency of the proposed PLL technique. Furthermore, a corresponding PLL parameter values tuning procedure is presented that illustrates the dynamic performance improvements that SOGI based FFPLL introduces when compared with SOGI based PLL. Consequently, FFPLL combined with the proposed new estimated angle correction factor represents a significant improvement when compared to the conventional SOGI based PLL.