Changguang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Changguang Zhang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Junhai Zhao
School of Civil Engineering, Chang’an University, Xi’an 710061, China
4 shared publications - Qing Yan
School of Civil Engineering and Geomatics, Shandong University of Technology, Zibo 255000, China
3 shared publications Wen Fan
School of Geological Engineering and Geomatics, Chang’an University, Xi’an, China
2 shared publicationsXindong Chen
Graduate Student, School of Highway, Chang'an Univ., Xi'an 710064, China
2 shared publications- Cheng Zhao
Department of Geotechnical Engineering Tongji University Shanghai China
1 shared publication Chuang-Zhou Wu
Tongji University
1 shared publication
Latest Publications
- 27 October 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (21) , 1-14
Ultimate bearing capacity of a strip foundation near slopes based on the unified strength theory
- 27 October 2021
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 14 (21) , 1-14
Ultimate bearing capacity of a strip foundation near slopes based on the unified strength theory
- 14 September 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (7) , 10332-10344
Mechanical properties of Na-montmorillonite-modified EICP-treated silty sand
The effects of Na-montmorillonite (Na-Mt) content and curing age on enzyme-induced carbonate precipitation (EICP)–treated soil were studied. First, the effects of Na-Mt addition on the urease activity, Ca2+ precipitation rate, and pH of the solution were analyzed through tube tests. Then, Na-Mt-modified EICP was used to reinforce silty sand in the Yellow River flooding area in China. The solidification effect and action mechanism of Na-Mt were investigated via the unconfined compressive strength (UCS) test, calcium carbonate content (CCC) measurement, X-ray diffraction, and scanning electron microscope analyses, wherein soil treated by conventional EICP and soil treated with Na-Mt alone were considered the control group. Na-Mt improved the urease activity and Ca2+ precipitation rate, lowered the pH, increased the CaCO3 production through chelation, then regulated the morphology of the CaCO3 crystals and facilitated the formation of densely aggregated calcite. The CCC and mechanical parameters increased rapidly during the first 7 days of curing, and then slowed down. The incorporation of 8% Na-Mt enhanced the UCS and Ca2+ utilization ratio at curing age of 7 days by 1.4 and 2.72 times, respectively, compared with that of traditional EICP; and the optimal Na-Mt content was identified to be 8%. At Na-Mt contents lower than 8%, the mathematically expressed improvement effect of the Na-Mt-modified EICP on the soil strength was greater than the arithmetic sum of that when these two approaches applied individually; this result confirms that the Na-Mt-modified EICP technique proposed herein is an efficient approach for solidifying fine-grained soil.
- 14 September 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (7) , 10332-10344
Mechanical properties of Na-montmorillonite-modified EICP-treated silty sand
The effects of Na-montmorillonite (Na-Mt) content and curing age on enzyme-induced carbonate precipitation (EICP)–treated soil were studied. First, the effects of Na-Mt addition on the urease activity, Ca2+ precipitation rate, and pH of the solution were analyzed through tube tests. Then, Na-Mt-modified EICP was used to reinforce silty sand in the Yellow River flooding area in China. The solidification effect and action mechanism of Na-Mt were investigated via the unconfined compressive strength (UCS) test, calcium carbonate content (CCC) measurement, X-ray diffraction, and scanning electron microscope analyses, wherein soil treated by conventional EICP and soil treated with Na-Mt alone were considered the control group. Na-Mt improved the urease activity and Ca2+ precipitation rate, lowered the pH, increased the CaCO3 production through chelation, then regulated the morphology of the CaCO3 crystals and facilitated the formation of densely aggregated calcite. The CCC and mechanical parameters increased rapidly during the first 7 days of curing, and then slowed down. The incorporation of 8% Na-Mt enhanced the UCS and Ca2+ utilization ratio at curing age of 7 days by 1.4 and 2.72 times, respectively, compared with that of traditional EICP; and the optimal Na-Mt content was identified to be 8%. At Na-Mt contents lower than 8%, the mathematically expressed improvement effect of the Na-Mt-modified EICP on the soil strength was greater than the arithmetic sum of that when these two approaches applied individually; this result confirms that the Na-Mt-modified EICP technique proposed herein is an efficient approach for solidifying fine-grained soil.
- Open Access
- 5 April 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-10
Safety Factor of Unsaturated Soil Slopes considering the Intermediate Principal Stress Effect and Different Profiles of Matric Suction
Profiles of matric suction are critical for assessing the stability of unsaturated soil slopes, and the strength of unsaturated soils is affected by the intermediate principal stress. This study presents a theoretical formulation of safety factor for infinite unsaturated soil slopes under four different profiles of matric suction using the limit equilibrium method. The unified shear strength equation under plane strain conditions is adopted to capture the effect of intermediate principal stress on the strength of unsaturated soils. The proposed formulation of safety factor is found to have good comparability and broad applicability. The validity of the proposed formulation is demonstrated by comparing its predictions with the results of the extended shear strength method and the finite element method available in the literature. Parametric studies show that the effect of intermediate principal stress on the stability of unsaturated soil slopes is significant; the difference of safety factor among four suction profiles is pronounced, and the safety factor is highest for a linear suction profile. In addition, the safety factor changes with the infiltration depth in two stages, decreases with the slope angle, and increases with effective strength parameters. The results of this study are capable of providing beneficial guidance for optimization designs and disaster preventions of unsaturated soil slopes.
- 5 April 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-10
Open AccessSafety Factor of Unsaturated Soil Slopes considering the Intermediate Principal Stress Effect and Different Profiles of Matric Suction
Profiles of matric suction are critical for assessing the stability of unsaturated soil slopes, and the strength of unsaturated soils is affected by the intermediate principal stress. This study presents a theoretical formulation of safety factor for infinite unsaturated soil slopes under four different profiles of matric suction using the limit equilibrium method. The unified shear strength equation under plane strain conditions is adopted to capture the effect of intermediate principal stress on the strength of unsaturated soils. The proposed formulation of safety factor is found to have good comparability and broad applicability. The validity of the proposed formulation is demonstrated by comparing its predictions with the results of the extended shear strength method and the finite element method available in the literature. Parametric studies show that the effect of intermediate principal stress on the stability of unsaturated soil slopes is significant; the difference of safety factor among four suction profiles is pronounced, and the safety factor is highest for a linear suction profile. In addition, the safety factor changes with the infiltration depth in two stages, decreases with the slope angle, and increases with effective strength parameters. The results of this study are capable of providing beneficial guidance for optimization designs and disaster preventions of unsaturated soil slopes.
- Open Access
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Ultimate Bearing Capacity of Strip Foundations in Unsaturated Soils considering the Intermediate Principal Stress Effect
The reasonable determination of ultimate bearing capacity is crucial to an optimal design of shallow foundations. Soils surrounding shallow foundations are commonly located above the water table and are thus in an unsaturated state. The intermediate principal stress has an improving effect on the unsaturated soil strength. In this study, the ultimate bearing capacity formulation of strip foundations in unsaturated soils is presented by using Terzaghi’s theory. The unified shear strength equation of unsaturated soils under a plane strain condition is utilized to capture the intermediate principal stress effect. Furthermore, two profiles of matric suction are considered and a hyperbolic function of the friction angle related to matric suction (φb) is adopted to describe strength nonlinearity. The validity of this study is demonstrated by comparing it with model tests and a theoretical solution reported in the literature. Finally, parameter studies are conducted to investigate the effects of intermediate principal stress, matric suction, and base roughness on the ultimate bearing capacity of strip foundations. Besides, the effect of strength nonlinearity is discussed with two methods representing the angle φb.
- 1 January 2020
- Published by Wiley in Advances in Civil Engineering
- Vol. 2020 (1)
Open AccessUltimate Bearing Capacity of Strip Foundations in Unsaturated Soils considering the Intermediate Principal Stress Effect
The reasonable determination of ultimate bearing capacity is crucial to an optimal design of shallow foundations. Soils surrounding shallow foundations are commonly located above the water table and are thus in an unsaturated state. The intermediate principal stress has an improving effect on the unsaturated soil strength. In this study, the ultimate bearing capacity formulation of strip foundations in unsaturated soils is presented by using Terzaghi’s theory. The unified shear strength equation of unsaturated soils under a plane strain condition is utilized to capture the intermediate principal stress effect. Furthermore, two profiles of matric suction are considered and a hyperbolic function of the friction angle related to matric suction (φb) is adopted to describe strength nonlinearity. The validity of this study is demonstrated by comparing it with model tests and a theoretical solution reported in the literature. Finally, parameter studies are conducted to investigate the effects of intermediate principal stress, matric suction, and base roughness on the ultimate bearing capacity of strip foundations. Besides, the effect of strength nonlinearity is discussed with two methods representing the angle φb.
- Open Access
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Calculation of Silo Wall Pressure considering the Intermediate Stress Effect
The reasonable determination of wall pressure is critical for the design of silo structures. In this study, the primary objective is to present four novel wall pressure coefficients based on four true triaxial strength criteria in the quasiplane strain state. These four strength criteria are the Drucker‐Prager (D‐P) criterion, the Matsuoka‐Nakai (M‐N) criterion, the Lade‐Duncan (L‐D) criterion, and the unified strength theory (UST), and they all consider the effect of the intermediate stress yet to different extent. These coefficients have a wide application range and are readily used to predict the distribution of wall pressure for deep and squat silos. Comprehensive comparisons are made between the predictions from the wall pressure coefficients described herein and experimental data reported in the literature as well as the results from the European, American, and Chinese silo standards or the Rankine and the modified Coulomb theories. It is found that the effect of the intermediate stress on the wall pressure is very significant for both deep and squat silos; the wall pressure of the D‐P criterion is underestimated, whereas that of the Mohr‐Coulomb (M‐C) criterion is overestimated; the L‐D criterion is recommended to be adopted to calculate the soil wall pressure.
- 1 January 2018
- Published by Wiley in Advances in Civil Engineering
- Vol. 2018 (1)
Open AccessCalculation of Silo Wall Pressure considering the Intermediate Stress Effect
The reasonable determination of wall pressure is critical for the design of silo structures. In this study, the primary objective is to present four novel wall pressure coefficients based on four true triaxial strength criteria in the quasiplane strain state. These four strength criteria are the Drucker‐Prager (D‐P) criterion, the Matsuoka‐Nakai (M‐N) criterion, the Lade‐Duncan (L‐D) criterion, and the unified strength theory (UST), and they all consider the effect of the intermediate stress yet to different extent. These coefficients have a wide application range and are readily used to predict the distribution of wall pressure for deep and squat silos. Comprehensive comparisons are made between the predictions from the wall pressure coefficients described herein and experimental data reported in the literature as well as the results from the European, American, and Chinese silo standards or the Rankine and the modified Coulomb theories. It is found that the effect of the intermediate stress on the wall pressure is very significant for both deep and squat silos; the wall pressure of the D‐P criterion is underestimated, whereas that of the Mohr‐Coulomb (M‐C) criterion is overestimated; the L‐D criterion is recommended to be adopted to calculate the soil wall pressure.
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 16 (4)
Overturning Stability of a Rigid Retaining Wall for Foundation Pits in Unsaturated Soils
The soils surrounding foundation pits are commonly unsaturated, but routine anti-overturning calculations of retaining walls are conducted assuming saturated soil mechanics. The primary objective of this paper is to present a simple method for the anti-overturning design of a rigid retaining wall for foundation pits in unsaturated soils. The earth pressure of the Rankine theory for unsaturated soils is adopted to derive the resisting and driving moments with respect to the toe of the retaining wall. The closed-form equations of embedment depth are derived with two different distributions of matric suction. The obtained result is easy to use and has wide applicability and excellent extensibility by considering comprehensive effects from many factors. The validity of the proposed simple method is demonstrated by comparing it with a lower bound solution. Engineering application procedures for this simple method are detailed, and parametric studies about a new defined overturning buried coefficient a...
- 1 August 2016
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 16 (4)
Overturning Stability of a Rigid Retaining Wall for Foundation Pits in Unsaturated Soils
The soils surrounding foundation pits are commonly unsaturated, but routine anti-overturning calculations of retaining walls are conducted assuming saturated soil mechanics. The primary objective of this paper is to present a simple method for the anti-overturning design of a rigid retaining wall for foundation pits in unsaturated soils. The earth pressure of the Rankine theory for unsaturated soils is adopted to derive the resisting and driving moments with respect to the toe of the retaining wall. The closed-form equations of embedment depth are derived with two different distributions of matric suction. The obtained result is easy to use and has wide applicability and excellent extensibility by considering comprehensive effects from many factors. The validity of the proposed simple method is demonstrated by comparing it with a lower bound solution. Engineering application procedures for this simple method are detailed, and parametric studies about a new defined overturning buried coefficient a...
- 25 August 2015
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 138 (1) , 011201
Elastic–Brittle–Plastic Analysis of Double-Layered Combined Thick-Walled Cylinder Under Internal Pressure
The elastic–brittle–plastic unified solutions of limit internal pressure are presented for double-layered combined thick-walled cylinder by the triple-shear unified strength criterion. The unified solutions obtained in this paper are especially versatile that can take into account of material brittle softening and intermediate principal stress quantitatively. The conventional existing elastic-perfectly plastic solutions, based on the Tresca yield criterion, Mises yield criterion, or twin-shear strength theory, can be categorized as special cases of the present unified solutions which can overcome their shortages. Parametric studies were carried out to evaluate the influences of various factors such as brittle softening parameter, strength theory parameter, cohesion, internal friction angle, and intermediate principal stress coefficient on the unified solutions. It is shown that proper choices of failure criterion, material behavior model, and brittle softening are significant in combined cylinder design. The new solutions can be naturally degraded to the existing formula and agree well with the results of the prevailing failure criteria. It is concluded that the unified solutions have an important practical value for the optimum design and engineering application of combined thick-walled cylinder.
- 25 August 2015
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 138 (1) , 011201
Elastic–Brittle–Plastic Analysis of Double-Layered Combined Thick-Walled Cylinder Under Internal Pressure
The elastic–brittle–plastic unified solutions of limit internal pressure are presented for double-layered combined thick-walled cylinder by the triple-shear unified strength criterion. The unified solutions obtained in this paper are especially versatile that can take into account of material brittle softening and intermediate principal stress quantitatively. The conventional existing elastic-perfectly plastic solutions, based on the Tresca yield criterion, Mises yield criterion, or twin-shear strength theory, can be categorized as special cases of the present unified solutions which can overcome their shortages. Parametric studies were carried out to evaluate the influences of various factors such as brittle softening parameter, strength theory parameter, cohesion, internal friction angle, and intermediate principal stress coefficient on the unified solutions. It is shown that proper choices of failure criterion, material behavior model, and brittle softening are significant in combined cylinder design. The new solutions can be naturally degraded to the existing formula and agree well with the results of the prevailing failure criteria. It is concluded that the unified solutions have an important practical value for the optimum design and engineering application of combined thick-walled cylinder.
- 11 April 2015
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 74 (4) , 3345-3356
A new unified failure criterion for unsaturated soils
- 11 April 2015
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 74 (4) , 3345-3356
A new unified failure criterion for unsaturated soils
- 5 May 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 136-142
A New Insight for the Effect of Strength Criterion on the Stress and Displacement around a Circular Opening
A unified formula for three strength criteria as the Mohr-Coulomb criterion, generalized Matsuoka-Nakai criterion, and Circumscribed Drucker-Prager criterion is presented under the plane strain state and is used to obtain the unified analytical solutions for the stress and displacement of a circular opening. The influence of strength criterion is discussed. The results show that the application of the unified formula is very convenient; the effect of strength criterion is significant.
- 5 May 2014
- Published by American Society of Civil Engineers (ASCE)
- p. 136-142
A New Insight for the Effect of Strength Criterion on the Stress and Displacement around a Circular Opening
A unified formula for three strength criteria as the Mohr-Coulomb criterion, generalized Matsuoka-Nakai criterion, and Circumscribed Drucker-Prager criterion is presented under the plane strain state and is used to obtain the unified analytical solutions for the stress and displacement of a circular opening. The influence of strength criterion is discussed. The results show that the application of the unified formula is very convenient; the effect of strength criterion is significant.