Geetanjali Yadav
Geetanjali Yadav has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Ramkrishna Sen
Department of Bioscience and Biotechnology, Indian Institute of Technology Kharagpur
8 shared publications - Eric C. D. Tan
National Laboratory of the Rockies, Golden, CO (United States)
2 shared publications - Abhijit Dutta
National Renewable Energy Laboratory
1 shared publication Alberta C. Carpenter
BOTTLE Consortium, Golden, CO, USA
1 shared publication- Amiya Kumar Sahoo
ICAR—Central Inland Fisheries Research Institute, Kolkata 700120, India
1 shared publication Ankush Karemore
Department of Biotechnology, Indian Institute of Technology Kharagpur, West Bengal 721302, India
1 shared publication
Latest Publications
- Open Access
- 25 December 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (9) , 4670-4682
Process Feasibility Analysis of Waste Biomass Valorization to Biochar and Bio-Oil via Slow and Fast Pyrolysis
The United States has abundant biomass and waste feedstock to support the nation’s energy addition and affordability targets. Pyrolysis, a thermochemical conversion process, decomposes lignocellulosic feedstocks into liquid, solid, and gaseous fuels that can contribute to the domestic production of biofuels, biopower, and bioproducts. Growing private sector interest in this technology is a key motivation for this comprehensive techno-economic process modeling analysis of a respective biorefinery that includes feedstock preprocessing, slow and fast pyrolysis, and product separation to bio-oil, biochar, and syngas hydrocarbons. Results show that biochar from slow pyrolysis could achieve minimum selling prices (MSPs) of $188–$260/t, competitive with reported market values, while bio-oil from fast pyrolysis is estimated to yield MSPs of $6.49–$9.68/GGE, approximately twice conventional fuel benchmarks. Sensitivity analysis identifies feedstock cost, product yield, and scale as primary cost drivers, while scenarios involving biochar carbon credits and high value applications may substantially improve economics. Overall, these results suggest that continued innovation in feedstock logistics, process integration, and market development will be critical to achieving economically viable and scalable bioproducts.
- 25 December 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (9) , 4670-4682
Open AccessProcess Feasibility Analysis of Waste Biomass Valorization to Biochar and Bio-Oil via Slow and Fast Pyrolysis
The United States has abundant biomass and waste feedstock to support the nation’s energy addition and affordability targets. Pyrolysis, a thermochemical conversion process, decomposes lignocellulosic feedstocks into liquid, solid, and gaseous fuels that can contribute to the domestic production of biofuels, biopower, and bioproducts. Growing private sector interest in this technology is a key motivation for this comprehensive techno-economic process modeling analysis of a respective biorefinery that includes feedstock preprocessing, slow and fast pyrolysis, and product separation to bio-oil, biochar, and syngas hydrocarbons. Results show that biochar from slow pyrolysis could achieve minimum selling prices (MSPs) of $188–$260/t, competitive with reported market values, while bio-oil from fast pyrolysis is estimated to yield MSPs of $6.49–$9.68/GGE, approximately twice conventional fuel benchmarks. Sensitivity analysis identifies feedstock cost, product yield, and scale as primary cost drivers, while scenarios involving biochar carbon credits and high value applications may substantially improve economics. Overall, these results suggest that continued innovation in feedstock logistics, process integration, and market development will be critical to achieving economically viable and scalable bioproducts.
- 14 July 2023
- Published by Taylor & Francis
- p. 139-179
Recycling Plastic Waste to Produce Chemicals
This study presents the results of a preliminary assessment on the technology, economics, and sustainability of using waste plastics as a feedstock to produce low molecular weight olefins via pyrolysis and gasification pathways. We also studied the formation of formaldehyde – an important polymer precursor – via the gasification of waste plastics. Process pathways for recovery of ethylene and propylene and production of formaldehyde from a simulated mixed plastic waste were constructed based on literature data. They included direct and indirect pathways based on either gasification or pyrolysis as the primary conversion step. Results of these studies have shown that significant economic challenges exist of producing olefins via pyrolysis and gasification, with the latter pathway especially difficult. Base costs of pyrolysis naphtha from waste plastics are higher when compared to the same material produced from fossil feedstocks. Base olefin costs for one direct route are two times higher than comparable costs from steam cracking of fossil naphtha. These costs are driven primarily by feedstock costs; some pyrolysis scenarios become more economically feasible when very low feedstock costs are used. Similarly, for gasification, the cost of methanol – the central intermediate – was found to be noticeable higher when produced by gasification of waste plastics compared to current selling prices, which negatively impacts all pathways that go through methanol as the central intermediate. Life-cycle assessment indicates that the production of pyrolysis naphtha from plastics is a carbon intensive operation; no major advantages were found in terms of greenhouse gas emissions for any of the pathways producing C2 and C3 olefins. The results of this study can serve as the baseline for future comparison to other plastic waste valorization processes.
- 14 July 2023
- Published by Taylor & Francis
- p. 139-179
Recycling Plastic Waste to Produce Chemicals
This study presents the results of a preliminary assessment on the technology, economics, and sustainability of using waste plastics as a feedstock to produce low molecular weight olefins via pyrolysis and gasification pathways. We also studied the formation of formaldehyde – an important polymer precursor – via the gasification of waste plastics. Process pathways for recovery of ethylene and propylene and production of formaldehyde from a simulated mixed plastic waste were constructed based on literature data. They included direct and indirect pathways based on either gasification or pyrolysis as the primary conversion step. Results of these studies have shown that significant economic challenges exist of producing olefins via pyrolysis and gasification, with the latter pathway especially difficult. Base costs of pyrolysis naphtha from waste plastics are higher when compared to the same material produced from fossil feedstocks. Base olefin costs for one direct route are two times higher than comparable costs from steam cracking of fossil naphtha. These costs are driven primarily by feedstock costs; some pyrolysis scenarios become more economically feasible when very low feedstock costs are used. Similarly, for gasification, the cost of methanol – the central intermediate – was found to be noticeable higher when produced by gasification of waste plastics compared to current selling prices, which negatively impacts all pathways that go through methanol as the central intermediate. Life-cycle assessment indicates that the production of pyrolysis naphtha from plastics is a carbon intensive operation; no major advantages were found in terms of greenhouse gas emissions for any of the pathways producing C2 and C3 olefins. The results of this study can serve as the baseline for future comparison to other plastic waste valorization processes.
- Top Cited PapersOpen Access
- 5 June 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (9) , 3638-3653
Techno-economic analysis and life cycle assessment for catalytic fast pyrolysis of mixed plastic waste
Pyrolysis of waste plastics has gained interest as a candidate chemical recycling technology. To examine the potential of this approach, we conducted a techno-economic analysis (TEA) and life cycle assessment (LCA) of a conceptual catalytic fast pyrolysis (CFP) facility that converts 240 metric tons/day of mixed plastic waste. The modeled base case predicts the minimum selling price (MSP) of a benzene, toluene, and xylenes (BTX) mixture at $1.07/kg when co-products are sold at their average market prices. We predict that the aromatic product stream can be cost-competitive with virgin BTX mixtures ($0.68/kg) if the mixed waste plastics are available for less than $0.10/kg or if crude oil prices exceed $60/barrel. Moreover, we estimate that CFP-based conversion of waste plastics can reduce the total supply chain energy use by 24% but with a 2.4-fold increase in greenhouse gas (GHG) emissions per kilogram of BTX, relative to incumbent manufacturing process. Sensitivity analysis highlights that feedstock cost, co-product selling prices, capital cost for product separations, and operating costs are key cost drivers. Further, we examine three additional CFP processes that differ in product composition, namely naphtha, and a case where the products are rich in either C2–C4 olefins or BTX aromatic hydrocarbons. Whereas the MSP of naphtha ($2.18/kg) is ~4-fold higher than virgin naphtha, both the olefin-rich and aromatics-rich product cases exhibit a potential reduction in MSP up to 40%, with a 21%–45% reduction in total supply chain energy and 2.2–3.8-fold increase in GHG emissions relative to incumbent manufacturing processes. LCA predicts that the CFP process exhibits lower fossil fuel depletion than virgin manufacturing across all cases as well as lower acidification, ozone depletion, and smog formation for select cases, but high utility and feedstock preparation requirements result in poorer performance across other metrics. Overall, this study highlights important process parameters for improving CFP of mixed waste plastics from economic and environmental perspectives.
- 5 June 2023
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 16 (9) , 3638-3653
Top Cited PapersOpen AccessTechno-economic analysis and life cycle assessment for catalytic fast pyrolysis of mixed plastic waste
Pyrolysis of waste plastics has gained interest as a candidate chemical recycling technology. To examine the potential of this approach, we conducted a techno-economic analysis (TEA) and life cycle assessment (LCA) of a conceptual catalytic fast pyrolysis (CFP) facility that converts 240 metric tons/day of mixed plastic waste. The modeled base case predicts the minimum selling price (MSP) of a benzene, toluene, and xylenes (BTX) mixture at $1.07/kg when co-products are sold at their average market prices. We predict that the aromatic product stream can be cost-competitive with virgin BTX mixtures ($0.68/kg) if the mixed waste plastics are available for less than $0.10/kg or if crude oil prices exceed $60/barrel. Moreover, we estimate that CFP-based conversion of waste plastics can reduce the total supply chain energy use by 24% but with a 2.4-fold increase in greenhouse gas (GHG) emissions per kilogram of BTX, relative to incumbent manufacturing process. Sensitivity analysis highlights that feedstock cost, co-product selling prices, capital cost for product separations, and operating costs are key cost drivers. Further, we examine three additional CFP processes that differ in product composition, namely naphtha, and a case where the products are rich in either C2–C4 olefins or BTX aromatic hydrocarbons. Whereas the MSP of naphtha ($2.18/kg) is ~4-fold higher than virgin naphtha, both the olefin-rich and aromatics-rich product cases exhibit a potential reduction in MSP up to 40%, with a 21%–45% reduction in total supply chain energy and 2.2–3.8-fold increase in GHG emissions relative to incumbent manufacturing processes. LCA predicts that the CFP process exhibits lower fossil fuel depletion than virgin manufacturing across all cases as well as lower acidification, ozone depletion, and smog formation for select cases, but high utility and feedstock preparation requirements result in poorer performance across other metrics. Overall, this study highlights important process parameters for improving CFP of mixed waste plastics from economic and environmental perspectives.
- Open Access
- 7 August 2021
- Published by Technoscience Academy in International Journal of Scientific Research in Science and Technology
- p. 556-567
Transportation Planning Using Conventional Four Stage Modeling : An Attempt for Identification of Problems in a Transportation System
In the formative development of urban transportation planning, travel forecasting is essential. Various travel simulation techniques are used to estimate possible traffic scenarios. It's been used to analyze road capability, transportation system developments, and new land use strategies and policies. The solution to travel decisions is generally obtained if the models are done in sequence. Many attempts are made to simulate the variety of choices made by travellers as a part of a response to a particular highway system, related transit system, and connected policies. For this purpose number of assumptions are considered regarding the decisions made by the people, factors considered by them, and their reaction as a response to the alternatives available in the transportation system. Generally, the process of travel simulation follows trip generating at the trip generation zone and moves through different links of the network and nodes. It ultimately ends at the trip attraction zone. The simulation method is known as Traditional Four Steps Transportation Modeling, and it includes the four basic models namely Trip Generation, Trip Distribution, Mode Choice, and Traffic Assignments. This paper it is tried to focus on the process of this traditional four-step transportation modeling system. The modeling method calculates a simplified transportation network from the city of Ulhasnagar, India.
- 7 August 2021
- Published by Technoscience Academy in International Journal of Scientific Research in Science and Technology
- p. 556-567
Open AccessTransportation Planning Using Conventional Four Stage Modeling : An Attempt for Identification of Problems in a Transportation System
In the formative development of urban transportation planning, travel forecasting is essential. Various travel simulation techniques are used to estimate possible traffic scenarios. It's been used to analyze road capability, transportation system developments, and new land use strategies and policies. The solution to travel decisions is generally obtained if the models are done in sequence. Many attempts are made to simulate the variety of choices made by travellers as a part of a response to a particular highway system, related transit system, and connected policies. For this purpose number of assumptions are considered regarding the decisions made by the people, factors considered by them, and their reaction as a response to the alternatives available in the transportation system. Generally, the process of travel simulation follows trip generating at the trip generation zone and moves through different links of the network and nodes. It ultimately ends at the trip attraction zone. The simulation method is known as Traditional Four Steps Transportation Modeling, and it includes the four basic models namely Trip Generation, Trip Distribution, Mode Choice, and Traffic Assignments. This paper it is tried to focus on the process of this traditional four-step transportation modeling system. The modeling method calculates a simplified transportation network from the city of Ulhasnagar, India.
- 1 January 2020
- Published by Elsevier in Journal of Cleaner Production
- Vol. 243
Effective valorization of microalgal biomass for the production of nutritional fish-feed supplements
- 1 January 2020
- Published by Elsevier in Journal of Cleaner Production
- Vol. 243
Effective valorization of microalgal biomass for the production of nutritional fish-feed supplements
- Open Access
Supercritical CO2 Transesterification of Triolein to Methyl-Oleate in a Batch Reactor: Experimental and Simulation Results
In earlier work (Silva et al., 2016; Soh et al., 2014a; Soh et al., 2015), the supercritical CO2 transesterification of triolein to methyl-oleate using Nafion solid-acid catalyst and large methanol/triolein molar feed ratios was carried out. Herein, these ratios are adjusted (from 50–550) to evaluate the yield of fatty acid methyl esters in batch laboratory reactors as temperature is varied from 80–95 °C and pressure is varied from 8.0–9.65 MPa. Also, to better understand the effect of varying these operating parameters, batch reactor simulations using the Soave-Redlich-Kwong Equation of State (RK-ASPEN EOS) in ASPEN PLUS are carried-out. A single-reaction kinetic model is used and phase equilibrium is computed as the reactions proceed. Experimental data are compared with these results.
Open AccessSupercritical CO2 Transesterification of Triolein to Methyl-Oleate in a Batch Reactor: Experimental and Simulation Results
In earlier work (Silva et al., 2016; Soh et al., 2014a; Soh et al., 2015), the supercritical CO2 transesterification of triolein to methyl-oleate using Nafion solid-acid catalyst and large methanol/triolein molar feed ratios was carried out. Herein, these ratios are adjusted (from 50–550) to evaluate the yield of fatty acid methyl esters in batch laboratory reactors as temperature is varied from 80–95 °C and pressure is varied from 8.0–9.65 MPa. Also, to better understand the effect of varying these operating parameters, batch reactor simulations using the Soave-Redlich-Kwong Equation of State (RK-ASPEN EOS) in ASPEN PLUS are carried-out. A single-reaction kinetic model is used and phase equilibrium is computed as the reactions proceed. Experimental data are compared with these results.
- 1 January 2018
- Published by Elsevier
- p. 1699-1704
Process Intensification of Algae Oil Extraction to Biodiesel
- 1 January 2018
- Published by Elsevier
- p. 1699-1704
Process Intensification of Algae Oil Extraction to Biodiesel
- 22 December 2017
- Published by Springer Nature
- p. 335-351
Sustainability of Microalgal Biorefinery: Scope, Challenges, and Opportunities
- 22 December 2017
- Published by Springer Nature
- p. 335-351
Sustainability of Microalgal Biorefinery: Scope, Challenges, and Opportunities