IHIvan Hevko

Ivan Hevko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ivan Hevko has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • New Technologies for Enhancing Road Traffic Safety at Pedestrian Crossings and Signalized Intersections

    by Ivan Hevko, Volodymyr Teslya, Maria Sipravska, Bogdan Hevko, Roman Khoroshun

    Ivan Нevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Volodymyr Teslya, PhD (Candidate of Technical Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-7865-4712, e-mail: volodymyr_teslya@ukr.net Maria Sipravska, Senior lecturer of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-6758-6593, e-mail: mariaradyk03@ukr.net Bogdan Hevko, PhD in Economic Sciences (Candidate of Economic Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-1639-2136, e-mail: gevkoivan1@ukr.net, 0967351082 Roman Khoroshun, Assistant of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-1862-7640, e-mail: roman_086@ukr.net Despite the implementation of various measures to improve road traffic safety, the accident rate at pedestrian crossings and signalized intersections remains high. The main causes include the human factor, ineffective traffic control, and insufficient use of modern technologies for monitoring and managing traffic flows. Unsignalized pedestrian crossings often pose a high-risk area due to unpredictable pedestrian and driver behavior, as well as poor visibility in adverse weather conditions. Signalized crossings and intersections also have drawbacks, particularly a lack of adaptability to traffic flow changes, which can lead to inefficient waiting times for both pedestrians and vehicles. Therefore, there is a need for research and implementation of new intelligent transport systems capable of analyzing real-time road conditions, adjusting traffic light operations, and improving safety for all road users. This study examines ways to enhance the efficiency and safety of road traffic through the introduction of new technologies in pedestrian crossing management and traffic flow regulation. The research focuses on the effectiveness of sensor-based unsignalized pedestrian crossings, sensor-controlled crossings with intelligent traffic lights, and signalized intersections equipped with adaptive traffic light systems. Their impact on accident reduction and improved traffic organization is analyzed. Practical recommendations for integrating these technologies into urban infrastructure are provided. The increasing number of vehicles and traffic intensity in urban areas contribute to a rise in accident rates, particularly at pedestrian crossings and regulated intersections. Traditional traffic control methods are not always effective as they fail to account for dynamic traffic flow changes and behavioral patterns of road users. Implementing intelligent transport systems can significantly improve the situation by enabling automated traffic management using advanced technologies. The objective of this study is to analyze and assess the efficiency of sensor-based unsignalized pedestrian crossings, sensor-controlled regulated crossings with intelligent traffic lights, and signalized intersections with adaptive traffic light systems. The research confirms that the implementation of smart pedestrian crossings and intersections contributes to a reduction in accident rates and directly impacts the decrease in mortality and injuries among road users. The proposed project solutions developed in this study help lower accident rates, reduce vehicle idle time at smart pedestrian crossings and intersections, decrease harmful emissions and fuel consumption, enhance driver productivity, and improve the overall efficiency of vehicle operations. Further studies should focus on developing cost-effective systems, integrating them into existing transport infrastructure, and evaluating the long-term effects of such technologies in large cities. To maximize effectiveness, detailed traffic flow analyses, local conditions assessments, and pre-implementation evaluations of expected outcomes should be conducted to ensure optimal deployment of smart pedestrian crossings and intersections in urban infrastructure.


  • Implementation of a computational experiment for shock interaction of spherical bodies

    by R Rogatynskyi, O Lyashuk, B Mussabayev, I Hevko, O Dmytriv, A Kozhevnykov

    Purpose. To identify the time-dependent patterns in the kinetic and dynamic parameters of impact-based contact interactions among objects, as derived from a computational experiment to construct relevant approximation relationships for designing technological processes to load spherical bodies, specifically pellets. Methodology. To determine the temporal laws governing changes in the kinematic and dynamic parameters of contact interactions and to develop the corresponding computational experiment model, a simulation-based approach was employed. This approach relies on solving the Hertz contact problem and modelling the relative motion of objects within a homogeneous coordinate system, based on solutions to their equations of motion. Findings. Experiments conducted with the developed simulation model made it possible to track the temporal distribution of forces during impact interactions of spherical bodies with a plane, as well as their kinematics – specifically, the duration of contact and the changes in linear and angular velocities at the moment of impact. The computational experiment was carried out using a model of pellet interactions with technological surfaces. Originality. Unlike the existing models, the newly developed algorithms and simulation model enable continuous monitoring of all the primary kinematic and dynamic parameters throughout the impact event, identifying both the maximum force and impact duration as well as yield an approximation function describing how impact force varies over time when spherical bodies collide with technological surfaces. The proposed algorithms also allow for the simultaneous simulation of multiple-body interactions, such as those occurring in a flow. Practical value. The obtained results were validated for the interaction of ore pellets with technological surfaces, making it possible to determine a safe approach velocity – one that prevents pellet destruction – when contacting working surfaces. This substantially reduces pellet fragmentation during transportation and loading operations, ultimately improving the quality of ferroalloy smelting from these pellets.


  • Study of Power Parameters of the Screw Spirals Forming

    by Oleg Lyashuk, Roman Rogatynskyi, Ivan Hevko, Tetiana Navrotska, Andrii Diachun


  • Features of structures and technological design of working bodies of bladed screw mixers

    by Ivan Нevko, Ternopil National Technical University named after Ivan Pulyu, Roman Leshchuk, Andriy Briksa, Oleg Stibailo, Serhiy Koval

    Ivan Нevko, Professor, Doctor in Technics (Doctor of Technic Sciences), Ivan Pulyuy Ternopil National Technical University, Ternopil, Ukraine, e-mail: gevkoivan1@ukr.net, ORCID ID: 0000-0001-5170-0857 Roman Leshchuk, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ivan Pulyuy Ternopil National Technical University, Ternopil, Ukraine, ORCID ID: 0000-0002-0380-2063 Andriy Briksa, post-graduate, Ivan Pulyuy Ternopil National Technical University, Ternopil, Ukraine, ORCID ID: 0009-0001-3223-0682 Oleg Stibailo, post-graduate, Ivan Pulyuy Ternopil National Technical University, Ternopil, Ukraine, ORCID ID: 0009-0007-9680-5426 Serhiy Koval, post-graduate, Ivan Pulyuy Ternopil National Technical University, Ternopil, Ukraine, ORCID ID: 0009-0005-8175-9258 Abstract Blade screw mixers are typical tools for mixing building materials, compound feed, various types of products in the food industry, etc. The principle of their operation uses a combination of the operation of moving multicomponent mixtures with the operation of mixing them. Features of bladed screw working bodies of mixers are the arrangement of blades along a helical line along the axis of the shaft, on which they are, as a rule, immovably fixed. However, separate structures of working bodies can be located on the shaft with the possibility of rotation. The production of the working body of the blade screw mixer in the most technological ways may involve the following sequence of technological operations: 1. Winding a spiral of the appropriate diameter. Drilling holes with a drill head on the end surface of a spiral wound with a dense package on the edge of the spiral, which is installed in the conductor (provided that a mechanical connection will be used in the design of the auger). Calibrating the helix to a given pitch. Installation (screwing) of a spiral on a hollow shaft with a given pitch. Fixation of the spiral on the hollow shaft (welded connection). Production of blade elements of the appropriate profile (stamping, cutting). Drilling of mounting holes on the end surface of the blade elements (provided that a mechanical connection will be used in the design of the auger). Fastening the blade elements on the spiral: option 1: in the holes with a bolt or rivet connection; option 2: using a welded connection. 2. Winding a spiral of the appropriate diameter from a rectangular profile blank. Cutting (cutting) segmental openings (removals) of the appropriate size and profile on the end surface of a dense package wound on the edge of a spiral to form the necessary blade elements on it. Calibrating the helix to a given pitch. Installation (screwing) of a spiral on a hollow shaft with a given pitch. Fixation of the spiral on the hollow shaft (welded connection). 3. The production of an L-shaped bladed spiral involves the cutting (cutting) of segmental holes (removals) of the appropriate size and profile on the end surface of the L-shaped profile workpiece to form the necessary blade elements on it (the operation can also be used for a rectangular workpiece). Winding the L-shaped spiral on the frame with an internal continuous cylindrical part of the corresponding diameter. Calibration of the L-shaped spiral to a given pitch. Drilling of fastening holes at the ends on the end surface of the cylindrical part of the L-shaped spiral. The manufacturing technology of bladed screw working bodies of mixers significantly affects their technical and economic indicators and is ensured by the use of various methods. Technological features of the design parameters of the blade spirals of the mixers, which are made in various ways from rolled sheet, tape or L-shaped profile (angle). The results of calculating the production cost of manufacturing 1 m/p of a bladed spiral using different manufacturing methods showed that the most economically effective method of manufacturing bladed spirals is winding a dense package of spirals along the inner end profile from rectangular blanks followed by cutting (cutting out) segmental holes (removals ) and calibration to a given step, as in general and other methods that use winding. The production of blade spirals by methods using stamping or rolling is many times more expensive. Blade screw mixers are typical tools for mixing building materials, compound feed, various types of products in the food industry, etc. The principle of their operation uses a combination of the operation of moving multicomponent mixtures with the operation of mixing them. Features of bladed screw working bodies of mixers are the arrangement of blades along a helical line along the axis of the shaft, on which they are, as a rule, immovably fixed. However, separate structures of working bodies can be located on the shaft with the possibility of rotation. The production of the working body of the blade screw mixer in the most technological ways may involve the following sequence of technological operations: 1. Winding a spiral of the appropriate diameter. Drilling holes with a drill head on the end surface of a spiral wound with a dense package on the edge of the spiral, which is installed in the conductor (provided that a mechanical connection will be used in the design of the auger). Calibrating the helix to a given pitch. Installation (screwing) of a spiral on a hollow shaft with a given pitch. Fixation of the spiral on the hollow shaft (welded connection). Production of blade elements of the appropriate profile (stamping, cutting). Drilling of mounting holes on the end surface of the blade elements (provided that a mechanical connection will be used in the design of the auger). Fastening the blade elements on the spiral: option 1: in the holes with a bolt or rivet connection; option 2: using a welded connection. 2. Winding a spiral of the appropriate diameter from a rectangular profile blank. Cutting (cutting) segmental openings (removals) of the appropriate size and profile on the end surface of a dense package wound on the edge of a spiral to form the necessary blade elements on it. Calibrating the helix to a given pitch. Installation (screwing) of a spiral on a hollow shaft with a given pitch. Fixation of the spiral on the hollow shaft (welded connection). 3. The production of an L-shaped bladed spiral involves the cutting (cutting) of segmental holes (removals) of the appropriate size and profile on the end surface of the L-shaped profile workpiece to form the necessary blade elements on it (the operation can also be used for a rectangular workpiece). Winding the L-shaped spiral on the frame with an internal continuous cylindrical part of the corresponding diameter. Calibration of the L-shaped spiral to a given pitch. Drilling of fastening holes at the ends on the end surface of the cylindrical part of the L-shaped spiral. The manufacturing technology of bladed screw working bodies of mixers significantly affects their technical and economic indicators and is ensured by the use of various methods. Technological features of the design parameters of the blade spirals of the mixers, which are made in various ways from rolled sheet, tape or L-shaped profile (angle). The results of calculating the production cost of manufacturing 1 m/p of a bladed spiral using different manufacturing methods showed that the most economically effective method of manufacturing bladed spirals is winding a dense package of spirals along the inner end profile from rectangular blanks followed by cutting (cutting out) segmental holes (removals ) and calibration to a given step, as in general and other methods that use winding. The production of blade spirals by methods using stamping or rolling is many times more expensive. Keywords blades, screw working body, mixer, method, technological design Full Text: PDF References 1. Diachun, A., Vasylkiv, V., Korol, O., Myhailiuk, V., Golovatyi, I. & Kuras, A. (2021). Investigation of geometrical parameters in screw surfaces whirling process. Scientific Journal of TNTU, Vol. 101, No. 1, P. 68–78. https://doi.org/10.33108/visnyk_tntu2021.01.068 [in English]. 2. Feng, Guang- liang & Bai, Yin-shan (2006). Some moulding ways of spiral vane. Coal Mine Machinery, Vol. 27, No. 9, Р. 835-849 [in English]. 3. Gheorghe Pleşu (2014). Package of calculus, drawing and design of the rolling tools for manufacturing of the helical surfaces. International Journal of Modern Manufacturing Technologies, No 1, P. 65-70 [in English]. 4. Hevko, I.B., Dyachun, A.Ye., Lyashuk, O.L., Martsenko, S.V. & Gypka, A.B. (2016). Research the force parameters of forming the screw cleaning elements. INMATEH - Agricultural Engineering, Vol. 49, №2, P. 77-82 [in English]. 5. Li Zheng Feng & Li Qiang Jiang (2013). Design of combined helical blade manufacturing device. Advanced Materials Research, Vol. 753–755, 1386–1390. Crossref. Doi: 10.4028/www.scientific.net/amr 753-755.1386. https://doi.org/10.4028/www.scientific.net/AMR [in English]. 6. Quan-Quan Han & Ri-Liang Liu (2013). Mathematical model and tool path calculation for helical groove whirling. Research Journal of Applied Sciences, Engineering and Technology, 6 (19), 3584–358 https://doi.org/10.19026/rjaset.6.3563 [in English]. 7. Rogatinskiy, R., Hevko, I., Gypka, A., Garmatyk, O. & Martsenko, S. (2017). Feasibility study of the method choice of manufacturing screw cleaning elements with the development and use of software. Acta Technologica Agriculturae, No. 2, 36-41. https://doi.org/10.1515/ata-2017-0007 [in English]. 8. Hevko, I., Diachun, A., Lyashuk, O., Vovk, Y. & Hupka, A. (2021). Study of Dynamic and Power Parameters of the Screw Workpieces with a Curved Profile Turning. Design, Simulation, Manufacturing: The Innovation Exchange: Book of Abstracts of the 4th International Conference, June 8-11, 2021. Sumy: IATDI, 2021. Vol. 1. Р. 385-394 [in English]. 9. Vasylkiv, V., Pylypets, M., Danylchenko, L. & Radyk, D. (2021). Investigation of deflections of winded screw flights and auger billets in the processes of their manufacture. Scientific Journal of TNTU, Vol. 104, No. 4, P. 33–43. https://doi.org/10.33108/visnyk_tntu2021.04.033 [in English]. 10. Vasyl'kiv, V. V. (2015). Rozvytok naukovo-prykladnykh osnov rozroblennia tekhnolohij vyrobnytstva hvyntovykh i shnekovykh zahotovok z vykorystanniam unifikatsii [Development of the scientific and applied foundations of the development of technologies for the production of screw and auger blanks using unification]. Extended abstract of Doctor’s thesis. L'viv [in Ukrainian]. 11. Vasyl'kiv, V. V., Radyk, L. D. & Hevko, I. B. (2004). Tekhnolohichni ta konstruktyvni osoblyvosti vyhotovlennia hvyntovykh zahotovok z lystovoho prokatu [Technological and constructive features of the production of screw blanks from rolled sheet]. Naukovi notatky  Scientific notes, 14, 12–18 [in Ukrainian]. 12. Нevko, B.M. et al. (2009). Tekhnolohichni osnovy formotvorennia riznoprofil'nykh hvyntovykh zahotovok [Technological bases of shaping of various profile screw blanks]. Ternopil: Publication of TDTU named after I. Pulyuya [in Ukrainian]. 13. Hevko, Iv. (2015). Tekhnolohichnist' konstruktsij hvyntovykh sektsijnykh robochykh orhaniv [Technological features of designs of helical sectional working bodies]. Visnyk TNTU  Bulletin of TNTU, 79, 3, 148-155 [in Ukrainian]. 14. Hud', V.Z. (2021). Mekhaniko-tekhnolohichni osnovy rozrobky bahatofunktsional'nykh sektsijnykh shnekiv dlia zernovoho materialu [Mechanical and technological basics of the development of multifunctional sectional screws for grain material]. Extended abstract of Doctor’s thesis. Ternopil' [in Ukrainian]. 15. Hevko, I. B. et al. (2019). Hnuchki hvyntovi konveiery: proektuvannia, tekhnolohiia vyhotovlennia, eksperymental'ni doslidzhennia [Flexible screw conveyors: design, manufacturing technology, experimental studies]. Ternopil': FOP Palianytsia V. A. [in Ukrainian]. 16. Liashuk, O. L., Diachun,A. Ye., Klendij, V. M. & Tret'iakov, O. L. (2018). Doslidzhennia sylovykh parametriv protsesu zmitsnennia hvyntovykh poverkhon' robochykh orhaniv deformuiuchymy puansonamy [Study of force parameters of the process of strengthening the helical surfaces of working bodies by deforming punches]. Rozvidka ta rozrobka naftovykh i hazovykh rodovysch  Exploration and development of oil and gas deposits, 1 (66), 38-43 [in Ukrainian]. 17. Liashuk, O. L., Diachun, A. Ye. & Tret'iakov, O. L. (2018). Doslidzhennia deformatsii zahotovky v protsesi narizannia zovnishnikh radiusnykh kanavok prystroiem iz dekil'koma riztsiamy [Study of deformation of the workpiece in the process of cutting external radius grooves with a device with several cutters]. Perspektyvni tekhnolohii ta prylady  Promising technologies and devices, 12, 105-110 [in Ukrainian]. 18. Pylypets', M. I., Vasyl'kiv, V. V., Radyk, D. L. & Pylypets', O. M. (2021). Peredumovy rozroblennia kombinovanykh operatsij vyhotovlennia hvyntovykh i shnekovykh zahotovok metodom obrobky metaliv tyskom [Prerequisites for the development of combined operations for the production of screw and auger workpieces by the method of pressure metal processing]. Perspektyvni tekhnolohii ta prylady  Promising technologies and devices, 18, 112–123 [in Ukrainian]. 19. Pylypets', M. I. ( 2002). Naukovo-tekhnolohichni osnovy vyrobnytstva navyvnykh zahotovok detalej mashyn [Scientific and technological basis of production of winding blanks of machine parts] Extended abstract of Doctor’s thesis. L'viv [in Ukrainian]. 20. Rohatyns'kyj, R.M., Hevko, I.B. & Diachun, A.Ye. (2014). Naukovo-prykladni osnovy stvorennia hvyntovykh transportno-tekhnolohichnykh mekhanizmiv [Scientific and applied foundations of the creation of screw transport and technological mechanisms]. Ternopil' : Vyd-vo TNTU imeni Ivana Puliuia [in Ukrainian]. 21. Hevko, B.M. et al. (2008). Tekhnolohichni osnovy formoutvorennia spetsial'nykh profil'nykh hvyntovykh detalej [Technological bases of forming of special profile screw parts]. Ternopil': TDTU imeni Ivana Puliuia [in Ukrainian]. Citations 1. Diachun A., Vasylkiv V., Korol O., Myhailiuk V., Golovatyi I., Kuras A. Investigation of geometrical parameters in screw surfaces whirling process. Scientific Journal of TNTU. 2021. Vol. 101, No. 1. P. 68–78. https://doi.org/10.33108/visnyk_tntu2021.01.068 2. Feng Guang- liang, Bai Yin-shan. Some moulding ways of spiral vane. Coal Mine Machinery. 2006 Vol. 27, No. 9. Р. 835-849. 3. Gheorghe Pleşu. Package of calculus, drawing and design of the rolling tools for manufacturing of the helical surfaces. International Journal of Modern Manufacturing Technologies. 2014. No. 1. P. 65-70. 4. Hevko I.B., Dyachun A.Ye., Lyashuk O.L., Martsenko S.V., Gypka A.B. Research the force parameters of forming the screw cleaning elements. INMATEH - Agricultural Engineering. 2016. Vol. 49, № 2. P.77-82. 5. Li Zheng Feng, Li Qiang Jiang. Design of combined helical blade manufacturing device. Advanced Materials Research. 2013. Vol. 753–755. P. 1386–1390. Crossref. Doi: 10.4028/www.scientific.net/amr 753-755.1386. https://doi.org/10.4028/www.scientific.net/AMR 6. Quan-Quan Han and Ri-Liang Liu. Mathematical model and tool path calculation for helical groove whirling. Research Journal of Applied Sciences, Engineering and Technology. 2013. 6(19). Р. 3584–3587. https://doi.org/10.19026/rjaset.6.3563 7. Rogatinskiy R., Hevko I., Gypka A., Garmatyk O., Martsenko S. Feasibility study of the method choice of manufacturing screw cleaning elements with the development and use of software. Acta Technologica Agriculturae. 2017. No. 2. P. 36–41. https://doi.org/10.1515/ata-2017-0007 8. Ivan Hevko, Andrii Diachun, Oleg Lyashuk, Yuriy Vovk, Andriy Hupka. Study of Dynamic and Power Parameters of the Screw Workpieces with a Curved Profile Turning. Design, Simulation, Manufacturing: The Innovation Exchange: Book of Abstracts of the 4th International Conference, June 8-11, 2021. Sumy: IATDI, 2021. Vol. 1. Р. 385-394. 9. Vasylkiv V., Pylypets M., Danylchenko L., Radyk D. Investigation of deflections of winded screw flights and auger billets in the processes of their manufacture. Scientific Journal of TNTU. 2021. Vol. 104, No. 4. P. 33–43. https://doi.org/10.33108/visnyk_tntu2021.04.033 10. Васильків В. В. Розвиток науково-прикладних основ розроблення технологій виробництва гвинтових і шнекових заготовок з використанням уніфікації: автореф. дис. на здобуття наук. ступеня д-ра техніч. наук: спец. 05.02.08. Львів, 2015. 48 с. 11. Васильків В. В., Радик Л. Д., Гевко І. Б.. Технологічні та конструктивні особливості виготовлення гвинтових заготовок з листового прокату. Наукові нотатки. 2004. Вип. 14. С. 12–18. 12. Технологічні основи формотворення різнопрофільних гвинтових заготовок / Гевко Б. М., Пилипець М. І., Васильків В. В., Радик Д. Л. Тернопіль: Вид-во ТДТУ ім. І. Пулюя, 2009. 457 с. 13. Гевко Ів., Клендій В. Технологічність конструкцій гвинтових секційних робочих органів. Вісник ТНТУ . 2015. № 3, т. 79. С. 148-155. 14. Гудь В.З. Механіко-технологічні основи розробки багатофункціональних секційних шнеків для зернового матеріалу: автореф. дис. на здобуття наук. ступеня д-ра техніч. наук: спец. 05.05.11. Тернопіль, 2021. 44 с. 15. Гнучкі гвинтові конвеєри: проектування, технологія виготовлення, експериментальні дослідження / Гевко І. Б. та ін. – Тернопіль: ФОП Паляниця В. А., 2019. 207 с. 16. Ляшук О. Л., Дячун А. Є., Клендій В. М., Третьяков О. Л. Дослідження силових параметрів процесу зміцнення гвинтових поверхонь робочих органів деформуючими пуансонами. Розвідка та розробка нафтових і газових родовищ. 2018. № 1 (66). С. 38-43. 17. Ляшук О. Л., Дячун А. Є., Третьяков О. Л. Дослідження деформації заготовки в процесі нарізання зовнішніх радіусних канавок пристроєм із декількома різцями. Перспективні технології та прилади. 2018. Вип. 12. С. 105-110. 18. Пилипець М. І., Васильків В. В., Радик Д. Л., Пилипець О. М. Передумови розроблення комбінованих операцій виготовлення гвинтових і шнекових заготовок методом обробки металів тиском. Перспективні технології та прилади. 2021. Вип. 18. С. 112–123. 19. Пилипець М. І. Науково-технологічні основи виробництва навивних заготовок деталей машин : автореф. дис. на здобуття наук. ступеня доктора техн. наук : спец. 05.03.01. Львів, 2002. 35 с. 20. Рогатинський Р.М., Гевко І.Б., Дячун А.Є. Науково-прикладні основи створення гвинтових...

  • Research of Protective Elements of Technological Equipment and Equipment of Motor Transport Enterprises

    by Ternopil National Technical University named after Ivan Pulyu, Ivan Hevko, Victor Hud, Mykhailo Levkovich, Andrii Gypka, Bohdan Hevko, Maria Sipravska, Volodymyr Teslia

    Ivan Hevko, Professor, Doctor in Technics (Doctor of Technic Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, Україна, e-mail: gevkoivan1@ukr.net, ORCID ID: 0000-0001-5170-0857 Victor Hud, Professor, Doctor in Technics (Doctor of Technic Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, e-mail: vic_g@ukr.net, ORCID ID: 0000-0001-5312-526X Mykhailo Levkovich, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, ORCID ID: 0000-0002-6793-8736 Maria Sipravska, Asistant, Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, ORCID ID: 0000-0001-6758-6593 Protective equipment is used in any equipment of motor vehicle enterprises, both to protect the equipment itself to reduce damage and for the worker. The protective elements of the equipment must provide high indicators of reliability and accuracy, therefore the purpose of this article is to conduct a study of these protective elements to improve their efficiency and reliability of operation when used on the equipment of motor vehicle enterprises. In the work, research on the design of protective couplings of various types, as well as experimental studies of the torque of the protective elements of these couplings. The places of use of these couplings were given with justification of their effectiveness and expediency in this equipment. Design schemes of these couplings are presented and the principles of their operation are described. Experimental studies of the torque depending on the design features of these couplings, calculations of the transmission of the maximum and minimum torque of the proposed protective couplings were carried out. Also, the experimental method was used to determine the indicators of the accuracy of operation due to the load on the protective elements of the proposed couplings, which showed good results. The proposed pulse-type coupling showed the possibility of load control without special design changes, which makes its use universal and effective in equipment. So, summing up, both experimental and theoretical studies can be concluded about the effectiveness of using these safety clutches in the equipment of motor vehicle enterprises. These protective clutches showed high indicators of accuracy and reliability of operation, which are confirmed by the results of research. Design features of the proposed protective couplings make their use universal, both for equipment with high load requirements and for mild loads, high accuracy of their operation makes them safe for workers.


  • Study of the Stress-Deformation State of the Bottom of the Semi-Trailer Truck Body Depending on the Placement of the Jumpers

    by Ternopil Ivan Puluj National Technical University, Ivan Hevko, Yuriy Pyndus, Mykhailo Levkovich, Volodymyr Teslia, Andriy Gupka, Maria Sipravska

    The purpose of this article is to study the influence of the geometric parameters of the elements of the bottom of the body of a truck semi-trailer on its stress-strain state. To solve this problem, a combination of analytical, numerical and experimental methods is used to investigate the stress-strain state of the structure in car bodies. With help of the stress-strain method, a comprehensive study of the bodies of cargo semi-trailers was carried out, which led to the development of innovative engineering solutions aimed at increasing their technical and economic indicators. This was achieved by analyzing the influence of various factors on the structure and design features. The research results were obtained on the basis of the stress-strain state (SST) using advanced methods of engineering analysis, in particular, using the specialized SolidWorks software complex on a CAD model representing the body of a semi-trailer truck. The results obtained after conducting these studies serve as the basis for making engineering decisions aimed at improving the design of the truck body.

  • Open Access

    The study of interaction parameters of the elastic brush screw working body fibers with the spherical surfaces of the grain material

    by Andrii Diachun, Ivan Hevko, Andrii Stanko, Oleg Korol, Oleg Derysh

    The article presents the design of the elastic brush screw working body of the screw conveyor, which makes it possible to reduce mechanical damage to grain, reduce dangerous loads caused by forced rolling when grain material is chocked during transportation. The relationship between the design parameters of elastic brush screw working bodies fibers and force loads on grains with elements of spherical surfaces and the conditions of their chocking during transportation is established. The calculation scheme for determining the parameters of grain transportation by an elastic brush screw working body is presented. The equation for determination of the allowable external load on the grain in the perpendicular direction to the flights of the elastic brush screw working body during transportation in the conveyor is derived. The condition of grain chocking between the fibers and the inner surface of the screw conveyor housing is determined.

  • Open Access

    Methodology of Force Parameters Justification of the Controlled Steering Wheel Suspension

    by Bogdan Sokil, Oleg Lyashuk, Mariya Sokil, Yuriy Vovk, Iryna Lebid, Ivan Hevko, Mykhaylo Levkovych, Roman Khoroshun, Anatoliy Matviyishyn

    The methodology for selecting the main force parameters of nonlinear non-conservative suspension for the main performance characteristics of wheeled vehicles has been developed based on the longitudinal-angular oscillations. The following has ...


  • Structural Synthesis of Brake Systems With Technical and Economic Rationale

    by Ternopil Ivan Puluj National Technical University, Ivan Hevko, Roman Rohatynsky, Oleg Lyashuk, Mikhajlo Levkovich, Volodymyr Teslia

    As a result of the synthesis of truck semi-trailer bodies by morphological analysis using hierarchical grouping and advanced engineering solutions for creating structures with improved technical and economic characteristics by analyzing the influence of various factors on design features. The data of the research are based on the stress - strain state (VAT) of the Simulation engineering analysis of the specialized software complex SolidWorks on the CAD model of the body of the truck semi - trailer. synthesis, brake disc, friction material. The synthesis of truck semi-trailer bodies was carried out by the method of morphological analysis using hierarchical grouping, and progressive engineering solutions were obtained for the creation of structures with improved technical and economic characteristics. As a result of the conducted research, it was established that the amount of cost savings due to the improvement of the construction of semi-trailer bodies of trucks with standard body dimensions of 2.5×8×1.8 (36 m3) will be approximately UAH 304.5 thousand.