MSMaria Sipravska

Maria Sipravska

*This is an algorithmically generated author record based on publicly available information.

Maria Sipravska has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • New Technologies for Enhancing Road Traffic Safety at Pedestrian Crossings and Signalized Intersections

    by Ivan Hevko, Volodymyr Teslya, Maria Sipravska, Bogdan Hevko, Roman Khoroshun

    Ivan Нevko, Professor, Doctor of Science, Professor of the Automobile Department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-5170-0857, e-mail: gevkoivan1@ukr.net Volodymyr Teslya, PhD (Candidate of Technical Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-7865-4712, e-mail: volodymyr_teslya@ukr.net Maria Sipravska, Senior lecturer of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0001-6758-6593, e-mail: mariaradyk03@ukr.net Bogdan Hevko, PhD in Economic Sciences (Candidate of Economic Sciences), Associate Professor of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0003-1639-2136, e-mail: gevkoivan1@ukr.net, 0967351082 Roman Khoroshun, Assistant of the Automobiles department, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, ORCID: https://orcid.org/0000-0002-1862-7640, e-mail: roman_086@ukr.net Despite the implementation of various measures to improve road traffic safety, the accident rate at pedestrian crossings and signalized intersections remains high. The main causes include the human factor, ineffective traffic control, and insufficient use of modern technologies for monitoring and managing traffic flows. Unsignalized pedestrian crossings often pose a high-risk area due to unpredictable pedestrian and driver behavior, as well as poor visibility in adverse weather conditions. Signalized crossings and intersections also have drawbacks, particularly a lack of adaptability to traffic flow changes, which can lead to inefficient waiting times for both pedestrians and vehicles. Therefore, there is a need for research and implementation of new intelligent transport systems capable of analyzing real-time road conditions, adjusting traffic light operations, and improving safety for all road users. This study examines ways to enhance the efficiency and safety of road traffic through the introduction of new technologies in pedestrian crossing management and traffic flow regulation. The research focuses on the effectiveness of sensor-based unsignalized pedestrian crossings, sensor-controlled crossings with intelligent traffic lights, and signalized intersections equipped with adaptive traffic light systems. Their impact on accident reduction and improved traffic organization is analyzed. Practical recommendations for integrating these technologies into urban infrastructure are provided. The increasing number of vehicles and traffic intensity in urban areas contribute to a rise in accident rates, particularly at pedestrian crossings and regulated intersections. Traditional traffic control methods are not always effective as they fail to account for dynamic traffic flow changes and behavioral patterns of road users. Implementing intelligent transport systems can significantly improve the situation by enabling automated traffic management using advanced technologies. The objective of this study is to analyze and assess the efficiency of sensor-based unsignalized pedestrian crossings, sensor-controlled regulated crossings with intelligent traffic lights, and signalized intersections with adaptive traffic light systems. The research confirms that the implementation of smart pedestrian crossings and intersections contributes to a reduction in accident rates and directly impacts the decrease in mortality and injuries among road users. The proposed project solutions developed in this study help lower accident rates, reduce vehicle idle time at smart pedestrian crossings and intersections, decrease harmful emissions and fuel consumption, enhance driver productivity, and improve the overall efficiency of vehicle operations. Further studies should focus on developing cost-effective systems, integrating them into existing transport infrastructure, and evaluating the long-term effects of such technologies in large cities. To maximize effectiveness, detailed traffic flow analyses, local conditions assessments, and pre-implementation evaluations of expected outcomes should be conducted to ensure optimal deployment of smart pedestrian crossings and intersections in urban infrastructure.


  • Impact of Fuel Parameters on Vehicle Technical Condition During Operation

    by Kharkiv National Automobile and Road University, Abramov Dmytrii, Volodymyr Teslia, Ternopil Ivan Puluj National Technical University, Andriy Gupka, Maria Sipravska

    Dmytrii Abramov, Professor, Doctor in Technics (Doctor of Technic Sciences), Kharkiv National Automobile and Road University, Kharkiv, Ukraine, ORCID ID: 0000-0003-1846-1991 Volodymyr Teslia, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: volodymyr_teslya@ukr.net, ORCID ID: 0000-0002-7865-4712 Andriy Gupka, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: Gypkab@gmail.com, ORCID ID: 0000-0002-7565-5664 Maria Sipravska, assistent, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine, e-mail: mariaradyk03@ukr.net, ORCID ID: 0000-0001-6758-6593 In this article, the importance of the interaction between fuel quality and the technical condition of the vehicle is examined to determine its dynamic characteristics and road safety. The research is based on the analysis of the impact of these factors on the vehicle during operation and maneuver execution, especially during overtaking maneuvers where having sufficient engine power reserve to achieve the required level of acceleration is crucial. It is noted that understanding the reasons for changes in dynamic properties is critical, as a reduction in the engine power reserve of the vehicle can complicate the safe execution of overtaking maneuvers. The main focus of the work is placed on the necessity of considering these changes in the vehicle's mobility control systems. The article also includes an analysis of recent research in the field of the interaction between fuel and the technical condition of the vehicle. Research in this area is aimed at understanding the interaction between fuel parameters and the technical characteristics of vehicles to make transportation more efficient, extend the service life of vehicles, and address environmental challenges. The article concludes with findings that emphasize the effectiveness of the developed coefficient for considering the technical condition of the vehicle and fuel quality to enhance the accuracy of safety systems and predict the potential acceleration of the vehicle in traffic. The proposed coefficient will make it possible to increase the accuracy of predicting the potential acceleration of the car by the on-board system. Additionally, the possibility of using this coefficient to detect changes in fuel quality and the technical condition of the vehicle is discussed, providing drivers with information through onboard diagnostic systems and measurement complexes to take appropriate actions.


  • Research of Protective Elements of Technological Equipment and Equipment of Motor Transport Enterprises

    by Ternopil National Technical University named after Ivan Pulyu, Ivan Hevko, Victor Hud, Mykhailo Levkovich, Andrii Gypka, Bohdan Hevko, Maria Sipravska, Volodymyr Teslia

    Ivan Hevko, Professor, Doctor in Technics (Doctor of Technic Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, Україна, e-mail: gevkoivan1@ukr.net, ORCID ID: 0000-0001-5170-0857 Victor Hud, Professor, Doctor in Technics (Doctor of Technic Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, e-mail: vic_g@ukr.net, ORCID ID: 0000-0001-5312-526X Mykhailo Levkovich, Associate Professor, PhD in Technics (Candidate of Technics Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, ORCID ID: 0000-0002-6793-8736 Maria Sipravska, Asistant, Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, ORCID ID: 0000-0001-6758-6593 Protective equipment is used in any equipment of motor vehicle enterprises, both to protect the equipment itself to reduce damage and for the worker. The protective elements of the equipment must provide high indicators of reliability and accuracy, therefore the purpose of this article is to conduct a study of these protective elements to improve their efficiency and reliability of operation when used on the equipment of motor vehicle enterprises. In the work, research on the design of protective couplings of various types, as well as experimental studies of the torque of the protective elements of these couplings. The places of use of these couplings were given with justification of their effectiveness and expediency in this equipment. Design schemes of these couplings are presented and the principles of their operation are described. Experimental studies of the torque depending on the design features of these couplings, calculations of the transmission of the maximum and minimum torque of the proposed protective couplings were carried out. Also, the experimental method was used to determine the indicators of the accuracy of operation due to the load on the protective elements of the proposed couplings, which showed good results. The proposed pulse-type coupling showed the possibility of load control without special design changes, which makes its use universal and effective in equipment. So, summing up, both experimental and theoretical studies can be concluded about the effectiveness of using these safety clutches in the equipment of motor vehicle enterprises. These protective clutches showed high indicators of accuracy and reliability of operation, which are confirmed by the results of research. Design features of the proposed protective couplings make their use universal, both for equipment with high load requirements and for mild loads, high accuracy of their operation makes them safe for workers.


  • Study of the Stress-Deformation State of the Bottom of the Semi-Trailer Truck Body Depending on the Placement of the Jumpers

    by Ternopil Ivan Puluj National Technical University, Ivan Hevko, Yuriy Pyndus, Mykhailo Levkovich, Volodymyr Teslia, Andriy Gupka, Maria Sipravska

    The purpose of this article is to study the influence of the geometric parameters of the elements of the bottom of the body of a truck semi-trailer on its stress-strain state. To solve this problem, a combination of analytical, numerical and experimental methods is used to investigate the stress-strain state of the structure in car bodies. With help of the stress-strain method, a comprehensive study of the bodies of cargo semi-trailers was carried out, which led to the development of innovative engineering solutions aimed at increasing their technical and economic indicators. This was achieved by analyzing the influence of various factors on the structure and design features. The research results were obtained on the basis of the stress-strain state (SST) using advanced methods of engineering analysis, in particular, using the specialized SolidWorks software complex on a CAD model representing the body of a semi-trailer truck. The results obtained after conducting these studies serve as the basis for making engineering decisions aimed at improving the design of the truck body.