Robson Lopes Grosso
Robson Lopes Grosso has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Shirley Leite Reis
Energy and Nuclear Research Institute-IPEN
2 shared publications Adler Souza
SENAI Institute for Innovation in Electrochemistry
1 shared publication- Adler Souza
SENAI Institute for Innovation in Electrochemistry, Curitiba 80215-090, PR, Brazil
1 shared publication Anthony M. Monterrosa
Materials, Physical, and Chemical Sciences , Sandia National Laboratories , Albuquerque , New Mexico 87185 , United States
1 shared publicationBeatriz Leao
SENAI Institute for Innovation in Electrochemistry
1 shared publication- Christopher M. Barr
Sandia National Laboratories
1 shared publication
Latest Publications
- Open Access
- 27 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32522-32528
A High-Precision Temperature Control System for Electrochemical Measurements of Lithium-Ion Batteries and Individual Components
Temperature is critically important for lithium-ion batteries (LIBs) because it significantly impacts their performance, lifetime, and safety. Thermal control plays an important role in the reliability and safety of LIBs, since extreme temperatures can drastically reduce battery capacity and efficiency, implying irreversible damage, such as side reactions, leakages, and explosions. Consequently, a thorough understanding of the electrochemical behavior of the battery and individual components as a function of temperature is crucial for application. In this work, a temperature control system was designed using Swagelok-type cells and a silicone rubber heater, enabling a systematic electrochemical characterization across a wide temperature range up to 250 °C with high precision. Quantitative validation of the proposed system demonstrates significantly improved thermal stability compared to a conventional box furnace due to the localized heating configuration. At set temperatures of 40 and 70 °C, the developed system maintained stable profiles of 42 ± 0.4 and 71.5 ± 0.6 °C, respectively. To demonstrate its applicability, NMC811 half-cells were evaluated at 25 and 45 °C. Furthermore, the ionic conductivity of thin flexible polymer and dense ceramic solid electrolytes was determined within temperature ranges of 25–70 °C and 25–250 °C using electrochemical impedance spectroscopy to demonstrate the versatility of the temperature control system on evaluation of both battery cells and individual components. The results confirm that the proposed setup enables reliable electrochemical characterization with high temperature stability.
- 27 May 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (22) , 32522-32528
Open AccessA High-Precision Temperature Control System for Electrochemical Measurements of Lithium-Ion Batteries and Individual Components
Temperature is critically important for lithium-ion batteries (LIBs) because it significantly impacts their performance, lifetime, and safety. Thermal control plays an important role in the reliability and safety of LIBs, since extreme temperatures can drastically reduce battery capacity and efficiency, implying irreversible damage, such as side reactions, leakages, and explosions. Consequently, a thorough understanding of the electrochemical behavior of the battery and individual components as a function of temperature is crucial for application. In this work, a temperature control system was designed using Swagelok-type cells and a silicone rubber heater, enabling a systematic electrochemical characterization across a wide temperature range up to 250 °C with high precision. Quantitative validation of the proposed system demonstrates significantly improved thermal stability compared to a conventional box furnace due to the localized heating configuration. At set temperatures of 40 and 70 °C, the developed system maintained stable profiles of 42 ± 0.4 and 71.5 ± 0.6 °C, respectively. To demonstrate its applicability, NMC811 half-cells were evaluated at 25 and 45 °C. Furthermore, the ionic conductivity of thin flexible polymer and dense ceramic solid electrolytes was determined within temperature ranges of 25–70 °C and 25–250 °C using electrochemical impedance spectroscopy to demonstrate the versatility of the temperature control system on evaluation of both battery cells and individual components. The results confirm that the proposed setup enables reliable electrochemical characterization with high temperature stability.
- Open Access
Effect of Zr4+ on Lithium-Ion Conductivity of Garnet-Type Li5+xLa3(Nb2−xZrx)O12 Solid Electrolytes
Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy.
Open AccessEffect of Zr4+ on Lithium-Ion Conductivity of Garnet-Type Li5+xLa3(Nb2−xZrx)O12 Solid Electrolytes
Garnet-type structured electrolytes are considered a key technology for the next generation of lithium-ion batteries such as all-solid-state batteries. Cubic Garnet-type solid oxides with composition Li5+xLa3(Nb2−xZrx)O12 (x between 0 and 1.5) were synthesized by solid-state reaction and sintered by spark plasma sintering. Powder characterization indicates the formation of solid solution with high chemical homogeneity and spherical particles. High relative densities (>96%) were obtained by spark plasma sintering at 950 °C for 10 min and pressure application of 50 MPa. Although the formation of secondary phase La2Zr2O7 was identified by the X-ray diffraction patterns of Zr-doped pellets, it has been eliminated for x = 0.75 and 1 by conventional heat treatment at 850 °C for 1 h. High ionic conductivity values were attained for x ≥ 0.75, reaching a maximum value in the order of 10−4 S.cm−1 at 25 °C with activation energy of 0.38 eV. The results indicated that Zr4+ promoted significant increasing of the lithium-ion conductivity by lowering the activation energy.
- 13 January 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (2) , 1041-1046
In Situ Transmission Electron Microscopy for Ultrahigh Temperature Mechanical Testing of ZrO2
This work demonstrates a novel approach to ultrahigh temperature mechanical testing using a combination of in situ nanomechanical testing and localized laser heating. The methodology is applied to characterizing and testing initially nanograined 10 mol% Sc2O3-stabilized ZrO2 up to its melting temperature. The results suggest that the low temperature strength of nanograined, d < 50 nm, oxides is not influenced by creep. Tensile fracture of ZrO2 bicrystals produce a weak temperature dependence suggesting that grain boundary energy dominates brittle fracture of grain boundaries even at high homologous temperatures; e.g. T = 2050 °C or T≈ 77%Tmelt. The maximum temperature for mechanical testing in this work is primarily limited by the stability of the sample, i.e. evaporation or melting, enabling a host of new opportunities for testing materials in the ultrahigh temperature regime.
- 13 January 2020
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 20 (2) , 1041-1046
In Situ Transmission Electron Microscopy for Ultrahigh Temperature Mechanical Testing of ZrO2
This work demonstrates a novel approach to ultrahigh temperature mechanical testing using a combination of in situ nanomechanical testing and localized laser heating. The methodology is applied to characterizing and testing initially nanograined 10 mol% Sc2O3-stabilized ZrO2 up to its melting temperature. The results suggest that the low temperature strength of nanograined, d < 50 nm, oxides is not influenced by creep. Tensile fracture of ZrO2 bicrystals produce a weak temperature dependence suggesting that grain boundary energy dominates brittle fracture of grain boundaries even at high homologous temperatures; e.g. T = 2050 °C or T≈ 77%Tmelt. The maximum temperature for mechanical testing in this work is primarily limited by the stability of the sample, i.e. evaporation or melting, enabling a host of new opportunities for testing materials in the ultrahigh temperature regime.
- Open Access
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 22 (2)
Influence of additives on phase stabilization of scandia-doped zirconia
The effects of small additions of tin, zinc, calcium and boron oxides on phase composition and electrical conductivity of zirconia-10 mol% scandia were investigated. Compounds containing 1 mol% zinc, tin and calcium oxides and 1, 3 and 5 wt.% boron oxide were prepared by solid state reaction and characterized by X-ray diffraction, density measurements, scanning electron microscopy and impedance spectroscopy. Full stabilization of the cubic structure at room temperature was obtained with additions of 1 mol% calcium oxide and 2 wt.% boron oxide. Partially stabilized compounds exhibit herringbone structure, characteristic of the β-rhombohedric phase. Specimens with calcium as additive show total conductivity of 23.8 mS.cm-1 at 750ºC with activation energy of 1.13 eV. Liquid phase sintering by boron oxide addition is effective to enhance the densification of the solid electrolyte.
- 1 January 2017
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 22 (2)
Open AccessInfluence of additives on phase stabilization of scandia-doped zirconia
The effects of small additions of tin, zinc, calcium and boron oxides on phase composition and electrical conductivity of zirconia-10 mol% scandia were investigated. Compounds containing 1 mol% zinc, tin and calcium oxides and 1, 3 and 5 wt.% boron oxide were prepared by solid state reaction and characterized by X-ray diffraction, density measurements, scanning electron microscopy and impedance spectroscopy. Full stabilization of the cubic structure at room temperature was obtained with additions of 1 mol% calcium oxide and 2 wt.% boron oxide. Partially stabilized compounds exhibit herringbone structure, characteristic of the β-rhombohedric phase. Specimens with calcium as additive show total conductivity of 23.8 mS.cm-1 at 750ºC with activation energy of 1.13 eV. Liquid phase sintering by boron oxide addition is effective to enhance the densification of the solid electrolyte.