Rui Fukui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rui Fukui has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Shin'IChi Warisawa
The University of Tokyo, Chiba, Japan
11 shared publications - Taketoshi Mori
Department of Life Support Technology (Molten), Graduate School of Medicine, The University of Tokyo, Tokyo, Japan
8 shared publications - Tomomasa Sato
The University of Tokyo
8 shared publications - Ryota Yokomura
Department of Human and Engineered Environmental Studies, School of Frontier Science, The University of Tokyo, Chiba, Japan
7 shared publications - Koki Honda
The University of Tokyo
5 shared publications Masamichi Shimosaka
Tokyo Institute of Technology, Tokyo, Japan
5 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 11904-11911
Enhancing Machining Robot Workspace and Stability via Two-Dimensional Base Expansion in a Modular Machining System
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (10) , 11904-11911
Open AccessEnhancing Machining Robot Workspace and Stability via Two-Dimensional Base Expansion in a Modular Machining System
- Open Access
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8872-8879
A High-Speed Omnidirectional Ceiling Mobile Robot Using a Synchronized Crawler-Hanging Mechanism
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8872-8879
Open AccessA High-Speed Omnidirectional Ceiling Mobile Robot Using a Synchronized Crawler-Hanging Mechanism
- Open Access
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 7716-7723
A Robot-Arm-Shaped Modularized Rail Platform for Deploying Maintenance Robots Continuously to Inaccessible Areas of Bridges
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 7716-7723
Open AccessA Robot-Arm-Shaped Modularized Rail Platform for Deploying Maintenance Robots Continuously to Inaccessible Areas of Bridges
- Open Access
- 3 May 2026
- Published by Taylor & Francis in Advanced Robotics
- Vol. 40 (9) , 454-469
Design of a semantic-based wrist-worn music generation system: enhancing self-efficacy compared to traditional symbolic-based methods
- 3 May 2026
- Published by Taylor & Francis in Advanced Robotics
- Vol. 40 (9) , 454-469
Open AccessDesign of a semantic-based wrist-worn music generation system: enhancing self-efficacy compared to traditional symbolic-based methods
- Open Access
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (2) , 2138-2145
Estimation of the Caged Object’s Posture Under Forces Using Stepwise Geometric Calculations
In pin–hole assembly processes, precise alignment or compliance mechanisms are typically required. This letter proposes a method for connecting objects by utilizing caging to constrain their motion, enabling the insertion of a pin into a hole to adjust the allowable relative pose for assembly. This approach eliminates the need for force control, even with low-degree-of-freedom manipulators, and reduces deflection caused by misalignment during connection. Although previous research has extensively studied appropriate finger configurations for caging, the behavior of caged objects under external forces remains insufficiently investigated. Furthermore, when connecting caged objects by contact, pose estimation often requires complex collision computations that account for intricate object geometries, which are computationally expensive and may fail to converge when small gaps are present. To address this issue, we propose a geometric method that approximates pose changes of caged three-dimensional objects under external forces as rotations about contact points. As a representative case, we focus on objects composed of cuboid elements. The estimated results for simple objects, including caged objects with small clearances, were consistent with geometrically derived theoretical solutions, and are obtained within 0.6 seconds, indicating a practical computation time.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (2) , 2138-2145
Open AccessEstimation of the Caged Object’s Posture Under Forces Using Stepwise Geometric Calculations
In pin–hole assembly processes, precise alignment or compliance mechanisms are typically required. This letter proposes a method for connecting objects by utilizing caging to constrain their motion, enabling the insertion of a pin into a hole to adjust the allowable relative pose for assembly. This approach eliminates the need for force control, even with low-degree-of-freedom manipulators, and reduces deflection caused by misalignment during connection. Although previous research has extensively studied appropriate finger configurations for caging, the behavior of caged objects under external forces remains insufficiently investigated. Furthermore, when connecting caged objects by contact, pose estimation often requires complex collision computations that account for intricate object geometries, which are computationally expensive and may fail to converge when small gaps are present. To address this issue, we propose a geometric method that approximates pose changes of caged three-dimensional objects under external forces as rotations about contact points. As a representative case, we focus on objects composed of cuboid elements. The estimated results for simple objects, including caged objects with small clearances, were consistent with geometrically derived theoretical solutions, and are obtained within 0.6 seconds, indicating a practical computation time.
- Open Access
- 12 October 2025
- Published by Association for Computing Machinery (ACM)
- p. 186-190
Oogiri Task: Preventing Daytime Drowsiness by Generating Humorous Captions for Images
- 12 October 2025
- Published by Association for Computing Machinery (ACM)
- p. 186-190
Open AccessOogiri Task: Preventing Daytime Drowsiness by Generating Humorous Captions for Images
- Open Access
- 18 June 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (12) , 777-789
An intuitive avatar operation method with low cognitive load for telecommunication using finger and wrist movements
- 18 June 2025
- Published by Taylor & Francis in Advanced Robotics
- Vol. 39 (12) , 777-789
Open AccessAn intuitive avatar operation method with low cognitive load for telecommunication using finger and wrist movements
- Open Access
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (6) , 6392-6399
Efficient Training Data Collection for Distance Sensor Arrays Through Data Correction and Augmentation Approaches
Several machine learning (ML)-based measurement systems have been proposed to estimate difficult-to-measure quantities from the values of distance sensor arrays. However, variations in sensor output characteristics (OCs) can lead to degradation in the estimation accuracy when transferring training data acquired from the original acquisition sensors to new target sensors. Moreover, acquiring training data from target sensors is time and labor intensive. We propose two methods to convert previously collected training data to reflect different OCs, enabling their repeated use. For evaluation, we use a device that estimates the relative position and orientation of vehicles based on the values of distance sensor arrays. The correction approach for the training data based on the OC data reduces the root-mean-square error (RMSE) by up to 23% compared with transferring training data. The augmentation approach transforms the training data into data that include different OCs using a mapping function constructed from a small batch of training data. Furthermore, a method for collecting a small batch of training data to achieve a higher OC conversion accuracy is demonstrated. The RMSE is reduced by up to 58% by the proposed method compared with transferring training data. The results of this study demonstrate the feasibility of the practical applications of ML-based measurement systems using distance sensor arrays, which may facilitate the development of simple and fast calibration methods.
- 16 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (6) , 6392-6399
Open AccessEfficient Training Data Collection for Distance Sensor Arrays Through Data Correction and Augmentation Approaches
Several machine learning (ML)-based measurement systems have been proposed to estimate difficult-to-measure quantities from the values of distance sensor arrays. However, variations in sensor output characteristics (OCs) can lead to degradation in the estimation accuracy when transferring training data acquired from the original acquisition sensors to new target sensors. Moreover, acquiring training data from target sensors is time and labor intensive. We propose two methods to convert previously collected training data to reflect different OCs, enabling their repeated use. For evaluation, we use a device that estimates the relative position and orientation of vehicles based on the values of distance sensor arrays. The correction approach for the training data based on the OC data reduces the root-mean-square error (RMSE) by up to 23% compared with transferring training data. The augmentation approach transforms the training data into data that include different OCs using a mapping function constructed from a small batch of training data. Furthermore, a method for collecting a small batch of training data to achieve a higher OC conversion accuracy is demonstrated. The RMSE is reduced by up to 58% by the proposed method compared with transferring training data. The results of this study demonstrate the feasibility of the practical applications of ML-based measurement systems using distance sensor arrays, which may facilitate the development of simple and fast calibration methods.
- Open Access
- 6 March 2024
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 8 (1) , 1-20
Planning the Future in a Longer Perspective
A long-term perspective toward the future enables a more comprehensive approach to decision-making, considering a variety of potential scenarios. The forecasting of mental health was anticipated to promote proactive planning, however, it faces challenges such as a short forecasting period and a lack of intuitive understanding of the relationship between actions and the forecast. This study presents a novel mental health indicator that incorporates a long-term perspective by considering past actions. A four-week experiment was conducted with 105 participants to evaluate the effects of a one-week forecast. Qualitative analysis reveals the effects of the one-week forecast on behavioral planning, emotional states, and reasons for disregarding the forecasts. Findings indicate that conventional mood indicators prompt participants to prioritize pre-existing schedules and perceive the forecast as infeasible, whereas the proposed indicator enhances the ability to plan work schedules in advance. Our results offer valuable insights into the presentation of forecasts for effectively managing mental health, considering the time constraints of everyday life.
- 6 March 2024
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 8 (1) , 1-20
Open AccessPlanning the Future in a Longer Perspective
A long-term perspective toward the future enables a more comprehensive approach to decision-making, considering a variety of potential scenarios. The forecasting of mental health was anticipated to promote proactive planning, however, it faces challenges such as a short forecasting period and a lack of intuitive understanding of the relationship between actions and the forecast. This study presents a novel mental health indicator that incorporates a long-term perspective by considering past actions. A four-week experiment was conducted with 105 participants to evaluate the effects of a one-week forecast. Qualitative analysis reveals the effects of the one-week forecast on behavioral planning, emotional states, and reasons for disregarding the forecasts. Findings indicate that conventional mood indicators prompt participants to prioritize pre-existing schedules and perceive the forecast as infeasible, whereas the proposed indicator enhances the ability to plan work schedules in advance. Our results offer valuable insights into the presentation of forecasts for effectively managing mental health, considering the time constraints of everyday life.
- Open Access
- 20 February 2024
- Published by Fuji Technology Press Ltd. in Journal of Robotics and Mechatronics
- Vol. 36 (1) , 39-48
Development of Remote Construction System of Modularized Rail Structure for Inexperienced Operators
Remotely controlled robots are required to operate in human-inaccessible environments, such as the decommissioning of nuclear power plants. In our previous studies, we proposed a modularized rail structure for such environments. In long-term decommissioning work at a nuclear power plant, robots are controlled by inexperienced operators who have limited knowledge of the design details of the robots. In this study, we developed a remote construction system for supporting inexperienced operators by transmitting the status information of the constructor robot to the operator during the remote construction of a modularized rail structure. The proposed remote construction system was designed based on a human information-processing model. Experiments were conducted using the developed remote construction system. The proposed method achieved a success count of inexperienced operators equivalent to that of skilled operators. Furthermore, a questionnaire administered to participants showed that their cognitive, psychological, and physical loads during construction were sufficiently low during the experiment.
- 20 February 2024
- Published by Fuji Technology Press Ltd. in Journal of Robotics and Mechatronics
- Vol. 36 (1) , 39-48
Open AccessDevelopment of Remote Construction System of Modularized Rail Structure for Inexperienced Operators
Remotely controlled robots are required to operate in human-inaccessible environments, such as the decommissioning of nuclear power plants. In our previous studies, we proposed a modularized rail structure for such environments. In long-term decommissioning work at a nuclear power plant, robots are controlled by inexperienced operators who have limited knowledge of the design details of the robots. In this study, we developed a remote construction system for supporting inexperienced operators by transmitting the status information of the constructor robot to the operator during the remote construction of a modularized rail structure. The proposed remote construction system was designed based on a human information-processing model. Experiments were conducted using the developed remote construction system. The proposed method achieved a success count of inexperienced operators equivalent to that of skilled operators. Furthermore, a questionnaire administered to participants showed that their cognitive, psychological, and physical loads during construction were sufficiently low during the experiment.