TSTakeo Sasai

Takeo Sasai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Takeo Sasai has a total of 100 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Leveraging digital twin technologies: all-photonics networks-as-a-service for Data Center Xchange in the era of AI [Invited Tutorial]

    by Hideki Nishizawa, Kazuya Anazawa, Tetsuro Inui, Toru Mano, Takeo Sasai, Giacomo Borraccini, Tatsuya Matsumura, Hiroyuki Ishihara, Sae Kojima, Yoshiaki Sone, et al.

    This tutorial paper presents a data center exchange (Data Center Xchange, DCX) architecture for all-photonics networks-as-a-service in distributed data center infrastructures, enabling the creation of a virtual large-scale data center by directly interconnecting geographically distributed data centers in metropolitan areas. In contrast to existing vendor-driven optical networking approaches, the proposed architecture adopts an operator-driven and open digital twin paradigm, leveraging cloud-native transponder architectures and open tools/interfaces such as GNPy and CMIS/TAI, and a user–carrier collaborative control framework. In particular, the cloud-native architecture enables operators to flexibly develop, deploy, and manage their own control and automation functions across transponders and controllers using container-based software components. Key requirements for such an architecture in the era of AI are identified: support for low-latency operations, scalability, reliability, and flexibility within a single network architecture; the ability to add new operator-driven automation functionalities based on an open networking approach; and the ability to control and manage remotely deployed transponders connected via access links with unknown physical parameters. We propose a set of technologies that enable digital twin operations for optical networks, including a cloud-native architecture for coherent transceivers, remote transponder control, fast end-to-end optical path provisioning, transceiver-based physical-parameter estimation incorporating digital longitudinal monitoring, and optical line system calibration, demonstrating their feasibility through field validations.


  • Open Access

    100-Tb/s-Class Long-Haul Transmission in Triple-Band WDM With Forward- and Backward-Pumped Distributed Raman Amplifications

    by Fukutaro Hamaoka, Kosuke Kimura, Masanori Nakamura, Takeo Sasai, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki

    This paper presents high-capacity, long-haul, wavelength division multiplexing (WDM) transmission exceeding 100 Tb/s over 1000 km in the S+C+L band, which utilizes forward (FW)- and backward (BW)-pumped distributed Raman amplifications (DRAs). From transmission experiments, we confirmed the relationship between the FW Raman on-off gain and improved signal-to-noise ratio of the signal to evaluate the effect of relative-intensity-noise transfer from the FW-pumped DRA on the transmitted signal quality and determine the optimal FW Raman on-off gain. We successfully demonstrated 100-Tb/s-class high-capacity long-haul transmission using 122 channels of 144-GBaud signals in the 18.3-THz triple-band WDM configuration with FW- and BW-pumped DRAs for 80-km fiber spans. The total achievable (and net) bitrates were 117.6 (112.0) Tb/s over 1040 km, 113.8 (107.7) Tb/s over 1200 km, 109.9 (103.0) Tb/s over 1360 km, and 104.0 (96.3) Tb/s over 1600 km.


  • Open Access

    Optical Link Tomography: First Field Trial and 4D Extension

    by Takeo Sasai, Giacomo Borraccini, Yue-Kai Huang, Hideki Nishizawa, Zehao Wang, Tingjun Chen, Yoshiaki Sone, Minami Takahashi, Tatsuya Matsumura, Masanori Nakamura, et al.

    Optical link tomography (OLT) is a rapidly evolving field that allows the multi-span, end-to-end visualization of optical power along fiber links in multiple dimensions from network endpoints, solely by processing signals received at coherent receivers. This paper has two objectives: (1) to report the first field trial of OLT, using a commercial transponder under standard DWDM transmission, and (2) to extend its capability to visualize across 4D (distance, time, frequency, and polarization), allowing for locating and measuring multiple QoT degradation causes, including time-varying power anomalies, spectral anomalies, and excessive polarization dependent loss. We also address a critical aspect of OLT, i.e., its need for high fiber launch power, by improving power profile signal-to-noise ratio through averaging across all available dimensions. Consequently, multiple loss anomalies in a field-deployed link are observed even at launch power lower than the system-optimal level. The applications and use cases of OLT from network commissioning to provisioning and operation for current and near-term network scenarios are also discussed.


  • Open Access

    Comprehensive Analysis of Longitudinal Power Monitoring in Various Fiber Types

    by Minami Takahashi, Takeo Sasai, Masanori Nakamura, Etsushi Yamazaki

    In this paper, we show that the performance of longitudinal optical power monitoring (LPM) remains consistent across different fiber types and a wide range of wavelengths. LPM is a location-resolved monitoring method for optical transmission systems that utilizes digital signal processing (DSP) at coherent receivers to estimate distributed optical power along transmission links based on fiber nonlinear effects, without requiring additional hardware. In this study, we analyze the performance of LPM through both experimental and theoretical approaches. In our experiments, the estimation accuracy of LPM was quantitatively assessed across different fiber types and a wide range of launch powers. To investigate the impact of fiber characteristics—especially the nonlinear coefficient—on LPM performance, we conducted experiments on fiber links composed exclusively of either standard single-mode fiber or pure silica core fiber. We also conducted simulations to independently evaluate the influence of individual parameters by modeling fiber propagation with varying nonlinear coefficients. Theoretical analysis further extended the evaluation by calculating the optimal launch power and the position-wise power-profile SNR, a key performance metric of LPM, under diverse fiber parameter conditions. The experiments, simulations, and theoretical analysis showed that LPM maintains comparable estimation accuracy at the optimal launch power across various fiber types and operational wavelengths, demonstrating its robustness and applicability to future optical transmission systems.


  • Design Principle of Fiber-Longitudinal Power Monitor

    by Takeo Sasai

    Longitudinal power monitoring (LPM) is a rapidly advancing field, which visualizes end-to-end optical power along a fiber link from a coherent receiver. We review its design principle and fundamental performance metrics.

  • SNR of Fiber-Longitudinal Power Monitor

    by Takeo Sasai, Etsushi Yamazaki, Sze Yun Set, Shinji Yamashita

    We present and experimentally validate analytical results on the accuracy of fiber-longitudinal power monitor at arbitrary positions. The power-profile SNR is shown to quantify the accuracy and determine the detectable limit of loss events.

  • Open Access

    Design of Fiber-Longitudinal Optical Power Monitor

    by Takeo Sasai, Sze Yun Set, Shinji Yamashita

    This paper presents analytical results on the accuracy of fiber-longitudinal optical power monitoring (LPM) at arbitrary positions. To quantify the accuracy, the position-wise variance and power-profile SNR of LPM are defined and analyzed, yielding formulas for these metrics. Using these metrics, we show that various designs and performance predictions of LPM for a given link and estimation conditions are possible in a unified manner. Specifically, the required SNR to detect a given loss event is first presented. Based on this relation, the design parameters of LPM, such as the sample size and optical power required to detect the loss, are explicitly determined. The performance such as the detectable limit of loss events at individual positions and maximum dynamic range are also specified. These results can be used as a basis for establishing a design principle of LPM.


  • Open Access

    Long-Haul >100-Tb/s Transmission Over >1000 km With High-Symbol-Rate Triple-Band WDM Signals

    by Fukutaro Hamaoka, Masanori Nakamura, Takeo Sasai, Shuto Sugawara, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki

    Extending the optical wavelength division multiplexing (WMD) bandwidth is a promising approach to push the envelope of single-mode fiber (SMF) capacity for optical transmission systems. In addition to increasing the system capacity, we should meet the demand for high-capacity long-haul optical transmission while accommodating next-generation high-speed client signals such as 800 Gb, 1.6 Tb Ethernet, and more. High-symbol-rate technologies with high-order quadrature amplitude modulation (QAM) based on digital coherent technologies can increase the capacity per WDM channel while maintaining the transmission distance. This paper demonstrates >100-Tb/s SMF inline-amplified transmission with 122-channel 144-GBaud PDM-PCS-16/64QAM signals in 18.3-THz triple-band WDM using the S, C, and extended L bands. A low-water-peak fiber, compliant with ITU-T G.652.D, was applied to the transmission line with hybrid backward distributed Raman and rare-earth-doped optical fiber amplifiers. This configuration enabled sufficient Raman on-off gain to compensate for excess power degradation in the S band due to stimulated Raman scattering among the wavebands. In this experiment, we obtained transmission results for a net bitrate of 132.3 Tb/s over 320 km (4×80 km) with an average WDM channel rate of 1.084 Tb/s/λ, 121.7 Tb/s over 720 km (9×80 km) with 997.8 Gb/s/λ, and 110.7 Tb/s over 1040 km (13×80 km) with 907.6 Gb/s/λ. These results demonstrate that multiband transmission with high-symbol-rate WDM channels is suitable to achieve >100-Tb/s SMF capacity with long-haul transmission of >1000 km while achieving high-speed WDM channels.


  • Open Access

    Multi-Granular Switching Node and Enabling Devices

    by Kenya Suzuki, Masashi Ota, Yoshie Morimoto, Keita Yamaguchi, Osamu Moriwaki, Fukutaro Hamaoka, Shuto Sugawara, Takeo Sasai, Takayuki Kobayashi, Masanori Nakamura, et al.

    Multi-band and space-division-multiplexing (SDM) is essential for realizing future high-capacity networks. A multi-band system needs to employ more bands other than conventional C+L bands, and SDM technology includes a multi-fiber system with multi-degree nodes. One challenge to realize multi-degree nodes is the scalability of devices. To address this issue, we propose a configuration of a multi-granular switching node by introducing a band cross-connect in addition to the conventional wavelength cross-connect, which relaxes the requirements for the devices. However, at the same time, new classes of devices need to be developed to construct the multi-granular switching node. We describe the multi-granular switching node and its enabling devices. We also prove that the proposed configuration of the band-granular switching node provides better transmission characteristics than a conventional CDC-ROADM only node.


  • Semi-automatic line-system provisioning with an integrated physical-parameter-aware methodology: field verification and operational feasibility

    by Hideki Nishizawa, Giacomo Borraccini, Takeo Sasai, Yue-Kai Huang, Toru Mano, Kazuya Anazawa, Masatoshi Namiki, Soichiroh Usui, Tatsuya Matsumura, Yoshiaki Sone, et al.

    We propose methods and an architecture to conduct measurements and optimize newly installed optical fiber line systems semi-automatically using integrated physics-aware technologies in a data center interconnection (DCI) transmission scenario. We demonstrate, for the first time to our knowledge, digital longitudinal monitoring (DLM) and optical line system (OLS) physical parameter calibration working together in real-time to extract physical link parameters for fast optical fiber line systems provisioning. Our methodology has the following advantages over traditional design: a minimized footprint at user sites, accurate estimation of the necessary optical network characteristics via complementary telemetry technologies, and the capability to conduct all operation work remotely. The last feature is crucial, as it enables remote operation to implement network design settings for immediate response to quality of transmission (QoT) degradation and reversion in the case of unforeseen problems. We successfully performed semi-automatic line system provisioning over field fiber network facilities at Duke University, Durham, North Carolina. The tasks of parameter retrieval, equipment setting optimization, and system setup/provisioning were completed within 1 h. The field operation was supervised by on-duty personnel who could access the system remotely from different time zones. By comparing Q-factor estimates calculated from the extracted link parameters with measured results from 400G transceivers, we confirmed that our methodology has a reduction in the QoT prediction errors ( ±0.3dB ) over existing designs ( ±0.6dB ).