EYEtsushi Yamazaki

Etsushi Yamazaki

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Etsushi Yamazaki has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    2000-km S+C+L-Band Transmission Exceeding 100-Tb/s Capacity Using Low-Noise Forward-Pumped Distributed Raman Amplification

    by Fukutaro Hamaoka, Hiroto Kawakami, Kosuke Kimura, Masanori Nakamura, Shimpei Shimizu, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki

    This paper demonstrates 100-Tb/s-class long-haul single-mode fiber transmission over 2000 km in the S+C+L band using a hybrid optical amplification system comprising forward- (FW) and backward-pumped distributed Raman amplification (DRA) and rare-earth-doped fiber amplifiers. To mitigate signal quality degradation due to relative intensity noise transferred from FW Raman pumps, we applied our proposed low-noise FW-pumps featuring polarization-interleaved narrow longitudinal modes using Fabry-Perot laser diodes without fiber Bragg gratings. Experimental results showed that this low-noise FW-pumped DRA enabled a signal-to-noise ratio improvement of more than 1.3 dB at the center channel in the S band compared with the conventional FW-pumped DRA with coherent pumps after 2000-km transmission. Using the proposed technique, we successfully achieved a net bitrate of 105.6 Tb/s over 2000 km (80 km × 25 span) in an 18.3-THz wavelength division multiplexing bandwidth with 122 channels of 144-GBaud signals, significantly outperforming previous transmission records in the S+C+L band.

  • Open Access

    100-Tb/s-Class Long-Haul Transmission in Triple-Band WDM With Forward- and Backward-Pumped Distributed Raman Amplifications

    by Fukutaro Hamaoka, Kosuke Kimura, Masanori Nakamura, Takeo Sasai, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki

    This paper presents high-capacity, long-haul, wavelength division multiplexing (WDM) transmission exceeding 100 Tb/s over 1000 km in the S+C+L band, which utilizes forward (FW)- and backward (BW)-pumped distributed Raman amplifications (DRAs). From transmission experiments, we confirmed the relationship between the FW Raman on-off gain and improved signal-to-noise ratio of the signal to evaluate the effect of relative-intensity-noise transfer from the FW-pumped DRA on the transmitted signal quality and determine the optimal FW Raman on-off gain. We successfully demonstrated 100-Tb/s-class high-capacity long-haul transmission using 122 channels of 144-GBaud signals in the 18.3-THz triple-band WDM configuration with FW- and BW-pumped DRAs for 80-km fiber spans. The total achievable (and net) bitrates were 117.6 (112.0) Tb/s over 1040 km, 113.8 (107.7) Tb/s over 1200 km, 109.9 (103.0) Tb/s over 1360 km, and 104.0 (96.3) Tb/s over 1600 km.


  • Open Access

    Optical Link Tomography: First Field Trial and 4D Extension

    by Takeo Sasai, Giacomo Borraccini, Yue-Kai Huang, Hideki Nishizawa, Zehao Wang, Tingjun Chen, Yoshiaki Sone, Minami Takahashi, Tatsuya Matsumura, Masanori Nakamura, et al.

    Optical link tomography (OLT) is a rapidly evolving field that allows the multi-span, end-to-end visualization of optical power along fiber links in multiple dimensions from network endpoints, solely by processing signals received at coherent receivers. This paper has two objectives: (1) to report the first field trial of OLT, using a commercial transponder under standard DWDM transmission, and (2) to extend its capability to visualize across 4D (distance, time, frequency, and polarization), allowing for locating and measuring multiple QoT degradation causes, including time-varying power anomalies, spectral anomalies, and excessive polarization dependent loss. We also address a critical aspect of OLT, i.e., its need for high fiber launch power, by improving power profile signal-to-noise ratio through averaging across all available dimensions. Consequently, multiple loss anomalies in a field-deployed link are observed even at launch power lower than the system-optimal level. The applications and use cases of OLT from network commissioning to provisioning and operation for current and near-term network scenarios are also discussed.


  • Open Access

    Comprehensive Analysis of Longitudinal Power Monitoring in Various Fiber Types

    by Minami Takahashi, Takeo Sasai, Masanori Nakamura, Etsushi Yamazaki

    In this paper, we show that the performance of longitudinal optical power monitoring (LPM) remains consistent across different fiber types and a wide range of wavelengths. LPM is a location-resolved monitoring method for optical transmission systems that utilizes digital signal processing (DSP) at coherent receivers to estimate distributed optical power along transmission links based on fiber nonlinear effects, without requiring additional hardware. In this study, we analyze the performance of LPM through both experimental and theoretical approaches. In our experiments, the estimation accuracy of LPM was quantitatively assessed across different fiber types and a wide range of launch powers. To investigate the impact of fiber characteristics—especially the nonlinear coefficient—on LPM performance, we conducted experiments on fiber links composed exclusively of either standard single-mode fiber or pure silica core fiber. We also conducted simulations to independently evaluate the influence of individual parameters by modeling fiber propagation with varying nonlinear coefficients. Theoretical analysis further extended the evaluation by calculating the optimal launch power and the position-wise power-profile SNR, a key performance metric of LPM, under diverse fiber parameter conditions. The experiments, simulations, and theoretical analysis showed that LPM maintains comparable estimation accuracy at the optimal launch power across various fiber types and operational wavelengths, demonstrating its robustness and applicability to future optical transmission systems.


  • Iterative Decoder of Channel-Polarized Multilevel Coding for Data Center Networks

    by Takeshi Kakizaki, Masanori Nakamura, Fukutaro Hamaoka, Shuto Yamamoto, Etsushi Yamazaki

    Data center networks (DCNs) require a low-cost, low-power optical transceiver to handle increased traffic from generative artificial intelligence, video streaming services, and more. Improving the required signal-to-noise ratio (RSNR) by digital signal processing such as forward error correction (FEC) mitigates the requirements for electrical and optical components. The optical transceivers in DCNs exploit a low-complexity soft-decision (SD) FEC, consisting of short block-length linear error-correcting codes and a low-complexity SD decoder (SDD), such as Chase decoding and ordered statistics decoding. The low-complexity SDD efficiently approaches a maximum likelihood decoding (MLD). However, the decoding performance of MLD is limited by its finite block length. In this paper, we describe the details of our proposed channel-polarized multilevel coding with iterative decoding (CP-MLC-ID). The proposed CP-MLC-ID improves the decoding performance by extending the codeword length to weakly and indirectly connect codewords via bypassed bits. The 19.5% –OH CP-MLC-ID using 128-bit extended Bose–Chaudhuri–Hocquenghem (eBCH) and KP4 codes outperforms the concatenated eBCH and KP4 codes with a net coding gain of 0.25 and 0.40dB for the same and double the number of SDDs, respectively. We also investigate the dependency of the decoding performance on the size of a bit interleaver. The performance degradation of CP-MLC-ID using an 8-bit interleaver is about 0.1dB compared to using the large-bit interleaver. Our results indicate that even a weak connection by exclusive-OR between codewords improves the decoding performance, compared to simple concatenated codes in the DCNs.


  • Reducing Noise Figure and Nonlinear Penalty in Distributed Raman Amplifier System Utilizing Low-Noise Forward Pumping Technique

    by Hiroto Kawakami, Kohei Saito, Akira Masuda, Shuto Yamamoto, Etsushi Yamazaki

    In this paper, we experimentally and theoretically show the improvement in noise characteristics in a distributed Raman amplifier (DRA) system for wavelength division multiplexing (WDM) transmission, utilizing our proposed pumping technique. We show that forward (Fwd) pumping is clearly superior to backward (Bwd) pumping in terms of noise figure (NF) defined by amplified spontaneous emission (ASE) noise and gain. We also show that bi-directional pumping is a more desirable configuration for NF improvement. However, it is known that Bwd pumping is preferable to Fwd pumping in suppressing signal quality degradation caused by nonlinear optical effects, especially the interaction between signal and pump light. To compare these advantages and disadvantages of Fwd pumping, we conducted WDM transmission experiments using a recirculating loop including DRA and erbium doped fiber amplifiers. We measured the Q-factors of 9-channel 131.6-GBaud polarization division multiplexed probabilistically shaped 32-quadrature amplitude modulation signals while changing the ratio of Fwd pumping to Bwd pumping in the DRA. By introducing the previously proposed low-noise Fwd pumping technique, a higher Q-factor could be achieved with a lower signal launch power, even when the total Raman gain remained constant. A Q-factor improvement of 0.4 dB and signal launch power reduction of more than 3.4 dB were simultaneously achieved. We also show that when Fwd pumping was performed with a conventional pump light source, the disadvantage of Fwd pumping was more noticeable than its advantage.


  • Open Access

    Triple-Band WDM Transmission Beyond 100-Tb/s Capacity With 1-Tb/s/λ-Class Digital Coherent Channels

    by Fukutaro Hamaoka, Masanori Nakamura, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki, Yoshiaki Kisaka

    Ultra-wideband wavelength division multiplexing (WDM) technologies are essential to dramatically increase the capacity of single mode fiber (SMF) and have recently demonstrated transmission at more than 100 to 400 Tb/s. High-symbol-rate technologies with high-order modulation formats are also effective in accommodating next-generation client signals such as high-speed 800-Gb and 1.6-Tb Ethernet and more. Therefore, the combination of ultra-wideband technologies with high-symbol-rate digital coherent channels must be targeted for research and development. This paper reviews the trends in ultra-wideband WDM transmission beyond a 100-Tb/s capacity. We also introduce our research results on triple-band WDM transmission beyond this capacity using real-time optical transponders and 1-Tb/s-class high-symbol-rate digital coherent channels.


  • Open Access

    Long-Haul >100-Tb/s Transmission Over >1000 km With High-Symbol-Rate Triple-Band WDM Signals

    by Fukutaro Hamaoka, Masanori Nakamura, Takeo Sasai, Shuto Sugawara, Takayuki Kobayashi, Yutaka Miyamoto, Etsushi Yamazaki

    Extending the optical wavelength division multiplexing (WMD) bandwidth is a promising approach to push the envelope of single-mode fiber (SMF) capacity for optical transmission systems. In addition to increasing the system capacity, we should meet the demand for high-capacity long-haul optical transmission while accommodating next-generation high-speed client signals such as 800 Gb, 1.6 Tb Ethernet, and more. High-symbol-rate technologies with high-order quadrature amplitude modulation (QAM) based on digital coherent technologies can increase the capacity per WDM channel while maintaining the transmission distance. This paper demonstrates >100-Tb/s SMF inline-amplified transmission with 122-channel 144-GBaud PDM-PCS-16/64QAM signals in 18.3-THz triple-band WDM using the S, C, and extended L bands. A low-water-peak fiber, compliant with ITU-T G.652.D, was applied to the transmission line with hybrid backward distributed Raman and rare-earth-doped optical fiber amplifiers. This configuration enabled sufficient Raman on-off gain to compensate for excess power degradation in the S band due to stimulated Raman scattering among the wavebands. In this experiment, we obtained transmission results for a net bitrate of 132.3 Tb/s over 320 km (4×80 km) with an average WDM channel rate of 1.084 Tb/s/λ, 121.7 Tb/s over 720 km (9×80 km) with 997.8 Gb/s/λ, and 110.7 Tb/s over 1040 km (13×80 km) with 907.6 Gb/s/λ. These results demonstrate that multiband transmission with high-symbol-rate WDM channels is suitable to achieve >100-Tb/s SMF capacity with long-haul transmission of >1000 km while achieving high-speed WDM channels.


  • Monitoring PDL Value and Location Using DSP-Based Longitudinal Power Profile Estimation

    by Minami Takahashi, Takeo Sasai, Etsushi Yamazaki, Yoshiaki Kisaka

    In polarization-multiplexed digital coherent systems, polarization dependent loss (PDL) is a dominant factor limiting the capacity and distance of fiber-optic transmission systems. In this paper, we propose polarization-wise power profile estimation (PPE) based on a linear least squares algorithm to estimate the value and location of excessive PDLs. The method visualizes polarization-wise signal power profiles at a coherent receiver with high sensitivity. We also experimentally demonstrate that PPE can detect PDL in an optical multi-span transmission link using the method. The experiment was performed using dual-polarization transmission over a 3-span × 50-km link, with a PDL resolution of 1–3 dB and a spatial step size of 1 km. In high power conditions, all estimated PDL values agree with actual values with estimation errors of well below 0.5 dB.


  • Optimization of iterative Chase soft decoder based on cross entropy minimization

    by Etsushi Yamazaki, Shinya Sugiura

    We propose a scheme to optimize the parameters of iterative Chase decoder. Minimizing the cross entropy loss of the final stage Chase decoder output in the form of log-likelihood ratio improves turbo product code performance.