Robert C. Anderson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Robert C. Anderson has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
A. Castano
Jet Propulsion Lab., California Inst. of Technol., Pasadena, CA, USA
1 shared publication- Alberto G. Fairén
Centro de Astrobiología (CAB), CSIC-INTA, Madrid, Spain
1 shared publication - Alfonso Fernández Davila
NASA Ames Research Center, Moffett Field, California, USA
1 shared publication - Ali Abdul-Aziz
Kent State Univ, Coll Aeronaut & Engn, Kent, OH 44242 USA
1 shared publication B. Bornstein
Jet Propulsion Lab., California Inst. of Technol., Pasadena, CA, USA
1 shared publicationC.S. Hodges
Department of Plant Pathology, North Carolina State University, Raleigh, North Carolina 27695
1 shared publication
Latest Publications
- Open Access
- 1 June 2019
- Published by Elsevier in Journal of Great Lakes Research
- Vol. 45 (3) , 522-535
Evaluating visible derivative spectroscopy by varimax-rotated, principal component analysis of aerial hyperspectral images from the western basin of Lake Erie
- 1 June 2019
- Published by Elsevier in Journal of Great Lakes Research
- Vol. 45 (3) , 522-535
Open AccessEvaluating visible derivative spectroscopy by varimax-rotated, principal component analysis of aerial hyperspectral images from the western basin of Lake Erie
- 20 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10973, 109730Q-25
Propulsion health monitoring assessed by microwave sensor performance and blade tip timing
Gas turbine engine makers are always striving to implement newer technologies to help monitor the engine health and performance. Among these technologies is the employment of highly specialized sensors within the engine compartment. The sensors are to screen response of components such as rotor disk blades which are subjects to complex loading conditions and that includes combined thermal and mechanical loads. Detecting unexpected or excessive blade Vibration before failure is critical to ensure safety and to achieve expected apparatus life. Traditional detection methods have relied solely on component inspection during service or on the use of gage telemetry systems as well as other means of non-destructive evaluation. These methods require time and cost and do not provided an accurate feedback of the health when the engine is in operation. At NASA Glenn Research Center, an effort is underway to develop and test validate microwave based blade tip timing sensors in support of the latter concerns and for the purpose of investigating their application for propulsion health monitoring under the Transformational Tools and Technologies Project. This process involves working with prototype sensors to determine their applicability and assess their ability in making blade tip clearance measurements along with further refining a methodology required to extract deflection measurements from the raw data acquired from the sensors. The efforts focus specifically on the use and implementation of microwave based tip-timing sensors that are intended to be used for non-contact stress measurement application. The work includes an experimental task to define the optimum set-up of these sensors, determine their sensitivity in making blade tip deflection measurements and validate their performance against realistic geometries in a spin rig. This also includes analytical calculations to compare to the experimental results. Data pertaining to the findings obtained from the testing as well as the supportive analytical results are presented and discussed.
- 20 March 2019
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10973, 109730Q-25
Propulsion health monitoring assessed by microwave sensor performance and blade tip timing
Gas turbine engine makers are always striving to implement newer technologies to help monitor the engine health and performance. Among these technologies is the employment of highly specialized sensors within the engine compartment. The sensors are to screen response of components such as rotor disk blades which are subjects to complex loading conditions and that includes combined thermal and mechanical loads. Detecting unexpected or excessive blade Vibration before failure is critical to ensure safety and to achieve expected apparatus life. Traditional detection methods have relied solely on component inspection during service or on the use of gage telemetry systems as well as other means of non-destructive evaluation. These methods require time and cost and do not provided an accurate feedback of the health when the engine is in operation. At NASA Glenn Research Center, an effort is underway to develop and test validate microwave based blade tip timing sensors in support of the latter concerns and for the purpose of investigating their application for propulsion health monitoring under the Transformational Tools and Technologies Project. This process involves working with prototype sensors to determine their applicability and assess their ability in making blade tip clearance measurements along with further refining a methodology required to extract deflection measurements from the raw data acquired from the sensors. The efforts focus specifically on the use and implementation of microwave based tip-timing sensors that are intended to be used for non-contact stress measurement application. The work includes an experimental task to define the optimum set-up of these sensors, determine their sensitivity in making blade tip deflection measurements and validate their performance against realistic geometries in a spin rig. This also includes analytical calculations to compare to the experimental results. Data pertaining to the findings obtained from the testing as well as the supportive analytical results are presented and discussed.
- 28 June 2017
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 2 (7) , eaan4383
Exploration telepresence: A strategy for optimizing scientific research at remote space destinations
Modern telepresence technologies put scientists at faraway destinations in space.
- 28 June 2017
- Published by American Association for the Advancement of Science (AAAS) in Science Robotics
- Vol. 2 (7) , eaan4383
Exploration telepresence: A strategy for optimizing scientific research at remote space destinations
Modern telepresence technologies put scientists at faraway destinations in space.
- Open Access
- 2 November 2011
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 46 (12) , 1832-1841
Meteorites at Meridiani Planum provide evidence for significant amounts of surface and near‐surface water on early Mars
- 2 November 2011
- Published by Wiley in Meteoritics & Planetary Science
- Vol. 46 (12) , 1832-1841
Open AccessMeteorites at Meridiani Planum provide evidence for significant amounts of surface and near‐surface water on early Mars
- Open Access
- 1 January 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 356-365
Current results from a rover science data analysis system
The Onboard Autonomous Science Investigation System (OASIS) evaluates geologic data gathered by a planetary rover. This analysis is used to prioritize the data for transmission, so that the data with the highest science value is transmitted to Earth. In addition, the onboard analysis results are used to identify science opportunities. A planning and scheduling component of the system enables the rover to take advantage of the identified science opportunity. OASIS is a NASA-funded research project that is currently being tested on the FIDO rover at JPL for use on future missions. In this paper, we provide a brief overview of the OASIS system, and then describe our recent successes in integrating with and using rover hardware. OASIS currently works in a closed loop fashion with onboard control software (e.g., navigation and vision) and has the ability to autonomously perform the following sequence of steps: analyze gray scale images to find rocks, extract the properties of the rocks, identify rocks of interest, retask the rover to take additional imagery of the identified target and then allow the rover to continue on its original mission. We also describe the early 2004 ground test validation of specific OASIS components on selected Mars exploration rover (MER) images. These components include the rock-finding algorithm, RockIT, and the rock size feature extraction code. Our team also developed the RockIT GUI, an interface that allows users to easily visualize and modify the rock-finder results. This interface has allowed us to conduct preliminary testing and validation of the rock-finder's performance.
- 1 January 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 356-365
Open AccessCurrent results from a rover science data analysis system
The Onboard Autonomous Science Investigation System (OASIS) evaluates geologic data gathered by a planetary rover. This analysis is used to prioritize the data for transmission, so that the data with the highest science value is transmitted to Earth. In addition, the onboard analysis results are used to identify science opportunities. A planning and scheduling component of the system enables the rover to take advantage of the identified science opportunity. OASIS is a NASA-funded research project that is currently being tested on the FIDO rover at JPL for use on future missions. In this paper, we provide a brief overview of the OASIS system, and then describe our recent successes in integrating with and using rover hardware. OASIS currently works in a closed loop fashion with onboard control software (e.g., navigation and vision) and has the ability to autonomously perform the following sequence of steps: analyze gray scale images to find rocks, extract the properties of the rocks, identify rocks of interest, retask the rover to take additional imagery of the identified target and then allow the rover to continue on its original mission. We also describe the early 2004 ground test validation of specific OASIS components on selected Mars exploration rover (MER) images. These components include the rock-finding algorithm, RockIT, and the rock size feature extraction code. Our team also developed the RockIT GUI, an interface that allows users to easily visualize and modify the rock-finder results. This interface has allowed us to conduct preliminary testing and validation of the rock-finder's performance.
- 1 November 1997
- Published by Elsevier in Biological Control
- Vol. 10 (3) , 151-158
An Evaluation of the Rust FungusGymnoconia nitensas a Potential Biological Control Agent for AlienRubusSpecies in Hawaii
- 1 November 1997
- Published by Elsevier in Biological Control
- Vol. 10 (3) , 151-158
An Evaluation of the Rust FungusGymnoconia nitensas a Potential Biological Control Agent for AlienRubusSpecies in Hawaii