Vinita Grover
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vinita Grover has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
Rakesh Shukla
Chemistry Division Bhabha Atomic Research Centre Mumbai India
12 shared publications- Avesh Kumar Tyagi
Homi Bhabha National Institute
10 shared publications R. Shukla
5 shared publicationsA. K. Tyagi
Homi Bhabha National Institute, Anushaktinagar Mumbai India
4 shared publications- Farheen Nasir Sayed
University of Cambridge
4 shared publications Jyoti Chahal
Chemistry Division
4 shared publications
Latest Publications
- 8 August 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (8) , e71088
Rare Earth Niobates, RENbO 4 : How Does the RE 3+ Size Impact Structural Evolution and Thermophysical Behavior?
Rare earth niobates (RENbO 4 ) are structurally fascinating utilitarian compounds for high temperature applications. The pursuit of understanding the implications of RE 3+ ‐ionic size on its wide‐ranging properties motivated the synthesis and investigation of RENbO 4 (RE: La, Nd, Sm, Gd, Dy, and Y) by diffraction, spectroscopic, luminescence, and thermomechanical studies. Single‐phasic fergusonite ( I 2/ c ) structure with lattice parameters proportional to RE 3+ ‐radius, transform to tetragonal scheelite ( I 4 1 / a ) at transition temperatures ( T c ), inversely proportional to RE 3+ ‐size. Various crystal chemistry parameters such as monoclinic distortions, landau order parameters (𝜂) and spontaneous strain ( ε s ) decreased with temperature as the symmetrical scheelite structure is approached, but strain parameters behave rather differently. Longitudinal strain decreases but shear strain increases with RE 3+ ‐size, and hence the ε s exhibits a maximum. The lattice thermal expansion coefficients (LTE) showed anisotropic behavior along different crystallographic axes and decrease with decrease in RE 3+ ‐size. Continuity in Δl/l versus T , but a change in slope at T c in thermomechanical studies, indicates the second‐order nature of fergusonite–scheelite phase transition, which is also supported by variation of ε s versus 𝜂. Bulk thermal expansion coefficients for monoclinic structures exhibited a decrease from La to Y (14.5 ppm to 10.1 ppm), but a slight increase (9.6 ppm to 10.4 ppm) for the tetragonal. The knowledge of dependence of critical functionalities of RENbO 4 on RE‐size provides a key to design functionality‐specific compounds.
- 8 August 2026
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (8) , e71088
Rare Earth Niobates, RENbO 4 : How Does the RE 3+ Size Impact Structural Evolution and Thermophysical Behavior?
Rare earth niobates (RENbO 4 ) are structurally fascinating utilitarian compounds for high temperature applications. The pursuit of understanding the implications of RE 3+ ‐ionic size on its wide‐ranging properties motivated the synthesis and investigation of RENbO 4 (RE: La, Nd, Sm, Gd, Dy, and Y) by diffraction, spectroscopic, luminescence, and thermomechanical studies. Single‐phasic fergusonite ( I 2/ c ) structure with lattice parameters proportional to RE 3+ ‐radius, transform to tetragonal scheelite ( I 4 1 / a ) at transition temperatures ( T c ), inversely proportional to RE 3+ ‐size. Various crystal chemistry parameters such as monoclinic distortions, landau order parameters (𝜂) and spontaneous strain ( ε s ) decreased with temperature as the symmetrical scheelite structure is approached, but strain parameters behave rather differently. Longitudinal strain decreases but shear strain increases with RE 3+ ‐size, and hence the ε s exhibits a maximum. The lattice thermal expansion coefficients (LTE) showed anisotropic behavior along different crystallographic axes and decrease with decrease in RE 3+ ‐size. Continuity in Δl/l versus T , but a change in slope at T c in thermomechanical studies, indicates the second‐order nature of fergusonite–scheelite phase transition, which is also supported by variation of ε s versus 𝜂. Bulk thermal expansion coefficients for monoclinic structures exhibited a decrease from La to Y (14.5 ppm to 10.1 ppm), but a slight increase (9.6 ppm to 10.4 ppm) for the tetragonal. The knowledge of dependence of critical functionalities of RENbO 4 on RE‐size provides a key to design functionality‐specific compounds.
- 9 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16142-16154
Elucidating the Limited Solubility of Y 3+ in La 2 Ti 2 O 7 : Looking Beyond Radius Ratio Guidelines
Chemically flexible A2B2O7 oxides are attractive candidates for designing structure-specific functional materials by judicious substitution. However, modulating functionality by substitution is governed by the solubility limits of the substituent. Present work reports an a typical 10 mol % solubility of Y3+ in La2Ti2O7(LTO:10Y), substantially lower than 60 mol %, anticipated by cationic radius ratio guidelines (rA/rB) for A2B2O7. Systematic experimental and theoretical investigations have been performed to justify this limited solubility. The solubility of Y3+ in La2Ti2O7 was verified by XRD at the bulk scale and via an Eu probe at the polyhedral level. Whereas XRD shows phase segregation beyond 10 mol % Y3+, the 0.5 mol % Eu3+-codoped LTO:10Y sample showed typical Eu3+ emissions, advocating structural homogeneity. However, the corresponding excitation spectrum revealed that insertion of Y3+ in LTO enhanced the energy transfer by the titanium-oxygen polyhedral network, [TiO6]8- → Eu3+. These observations were rationalized through density functional theory (DFT) calculations, which unveiled yttrium's preference for a low-coordination La site that substantially modifies adjacent TiO6 polyhedra and influences the energy transfer. Combined experimental and theoretical studies propose that yttrium's preference for a lower coordination number and a shorter/stronger metal-oxygen bond renders site selectivity and simultaneous regulation of the TiO6 network, limiting its solubility in La2Ti2O7. Thus, it provides supporting evidence for bonding-controlled substitution of yttrium in La2Ti2O7, rendering solubility lesser than that endorsed by radius ratio guidelines.
- 9 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (28) , 16142-16154
Elucidating the Limited Solubility of Y 3+ in La 2 Ti 2 O 7 : Looking Beyond Radius Ratio Guidelines
Chemically flexible A2B2O7 oxides are attractive candidates for designing structure-specific functional materials by judicious substitution. However, modulating functionality by substitution is governed by the solubility limits of the substituent. Present work reports an a typical 10 mol % solubility of Y3+ in La2Ti2O7(LTO:10Y), substantially lower than 60 mol %, anticipated by cationic radius ratio guidelines (rA/rB) for A2B2O7. Systematic experimental and theoretical investigations have been performed to justify this limited solubility. The solubility of Y3+ in La2Ti2O7 was verified by XRD at the bulk scale and via an Eu probe at the polyhedral level. Whereas XRD shows phase segregation beyond 10 mol % Y3+, the 0.5 mol % Eu3+-codoped LTO:10Y sample showed typical Eu3+ emissions, advocating structural homogeneity. However, the corresponding excitation spectrum revealed that insertion of Y3+ in LTO enhanced the energy transfer by the titanium-oxygen polyhedral network, [TiO6]8- → Eu3+. These observations were rationalized through density functional theory (DFT) calculations, which unveiled yttrium's preference for a low-coordination La site that substantially modifies adjacent TiO6 polyhedra and influences the energy transfer. Combined experimental and theoretical studies propose that yttrium's preference for a lower coordination number and a shorter/stronger metal-oxygen bond renders site selectivity and simultaneous regulation of the TiO6 network, limiting its solubility in La2Ti2O7. Thus, it provides supporting evidence for bonding-controlled substitution of yttrium in La2Ti2O7, rendering solubility lesser than that endorsed by radius ratio guidelines.
- 12 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 3846-3861
Tailorable Electrical Materials by Simultaneous Maneuvering of A -Sites and B -Sites in BaTiO 3
The study reports structural and electrical evolution in La3+/Mn3+ cosubstituted BaTiO3, with compositions LaxBa1-xMnxTi1-xO3 (x = 0.00-0.50) in search of lead-free energy storage materials. Solid-state synthesized samples were thoroughly characterized by XRD, Raman spectroscopy, XPS, SEM, AC-impedance, and P-E measurements. Structural analysis revealed a tetragonal-to-rhombohedral (T to R) phase transition with increasing substitution, accompanied by lattice distortion and reduced tetragonality. Raman spectroscopy could clearly delineate R-type modes in otherwise single-phasic (T) La0.05Ba0.95Mn0.05Ti0.95O3. XPS confirmed mixed valence states of Mn (Mn2+/Mn3+) and O-vacancies which influenced structural and electrical behavior. Introduction of 2 mol % La3+/Mn3+ led to doubling of dielectric permittivity, K (∼1205), relative to BaTiO3. This is attributed to plausible distortion in BaO8/TiO6 polyhedra caused by occupancy of the same lattice sites by ions of varying sizes and oxidation states. The composition La0.05Ba0.95Mn0.05Ti0.95O3 showed an almost frequency-independent K (∼400) and low dielectric loss (0.05). LaxBa1-xMnxTi1-xO3 (x ≥ 0.1) yielded lossy, conduction-dominated behavior consistent with defect-facilitated ion transport. Simultaneous occurrence of ferroelectricity and visible band gap (2.23 eV) in La0.02Ba0.98Mn0.02Ti0.98O3 proposes a potential ferroelectric-photovoltaic material. These results establish La/Mn codoping in BaTiO3 as an effective strategy to yield ferroelectrics, low-loss dielectrics, and conductors by composition-driven structural tailoring.
- 12 February 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (7) , 3846-3861
Tailorable Electrical Materials by Simultaneous Maneuvering of A -Sites and B -Sites in BaTiO 3
The study reports structural and electrical evolution in La3+/Mn3+ cosubstituted BaTiO3, with compositions LaxBa1-xMnxTi1-xO3 (x = 0.00-0.50) in search of lead-free energy storage materials. Solid-state synthesized samples were thoroughly characterized by XRD, Raman spectroscopy, XPS, SEM, AC-impedance, and P-E measurements. Structural analysis revealed a tetragonal-to-rhombohedral (T to R) phase transition with increasing substitution, accompanied by lattice distortion and reduced tetragonality. Raman spectroscopy could clearly delineate R-type modes in otherwise single-phasic (T) La0.05Ba0.95Mn0.05Ti0.95O3. XPS confirmed mixed valence states of Mn (Mn2+/Mn3+) and O-vacancies which influenced structural and electrical behavior. Introduction of 2 mol % La3+/Mn3+ led to doubling of dielectric permittivity, K (∼1205), relative to BaTiO3. This is attributed to plausible distortion in BaO8/TiO6 polyhedra caused by occupancy of the same lattice sites by ions of varying sizes and oxidation states. The composition La0.05Ba0.95Mn0.05Ti0.95O3 showed an almost frequency-independent K (∼400) and low dielectric loss (0.05). LaxBa1-xMnxTi1-xO3 (x ≥ 0.1) yielded lossy, conduction-dominated behavior consistent with defect-facilitated ion transport. Simultaneous occurrence of ferroelectricity and visible band gap (2.23 eV) in La0.02Ba0.98Mn0.02Ti0.98O3 proposes a potential ferroelectric-photovoltaic material. These results establish La/Mn codoping in BaTiO3 as an effective strategy to yield ferroelectrics, low-loss dielectrics, and conductors by composition-driven structural tailoring.
- Open Access
- 3 October 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (13)
Spectroscopic insights into structural and electronic modifications in Ce0.8Zr0.2O2 under low-energy ion irradiation
This study presents a comprehensive spectroscopic investigation of defect formation and structural stability in polycrystalline Ce0.8Zr0.2O2 subjected to 1.75 MeV Xe5+ ion irradiation up to a fluence of 1 × 1017 ions/cm2. Building on our earlier structural analysis of Xe-induced defects in Ce0.8Zr0.2O2, we employ Raman spectroscopy, synchrotron-based x-ray photoelectron spectroscopy (XPS), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), and photoluminescence (PL) to elucidate atomic-scale structural and electronic modifications. Raman analysis reveals the emergence of Ce3+ and oxygen-vacancy-induced distortions, evident from peak broadening and shifts associated with B1g, F2g, and LO phonon modes. The extent of structural disorder is quantified from Raman intensity ratios and FWHM broadening, revealing damage region diameters of ∼0.31 ± 0.03 and ∼0.22 ± 0.03 nm, respectively. XPS confirms the partial reduction of Ce4+ to Ce3+ and Zr4+ to Zr3+, along with oxygen-vacancy formation that contributes to lattice relaxation and stabilization of the fluorite structure. UV–Vis DRS measurements show a decrease in optical bandgap from 3.37 to 2.71 eV and an increase in Urbach energy from 1.09 to 2.33 eV, indicating enhanced electronic disorder. PL intensity is quenched upon irradiation due to increased non-radiative recombination through defect centers. These findings provide a coherent spectroscopic framework to understand irradiation-driven redox and defect processes in Ce0.8Zr0.2O2. Its retained crystallinity while accommodating high defect densities highlights its promise as a radiation-tolerant matrix for advanced nuclear and extreme-environment applications.
- 3 October 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (13)
Open AccessSpectroscopic insights into structural and electronic modifications in Ce0.8Zr0.2O2 under low-energy ion irradiation
This study presents a comprehensive spectroscopic investigation of defect formation and structural stability in polycrystalline Ce0.8Zr0.2O2 subjected to 1.75 MeV Xe5+ ion irradiation up to a fluence of 1 × 1017 ions/cm2. Building on our earlier structural analysis of Xe-induced defects in Ce0.8Zr0.2O2, we employ Raman spectroscopy, synchrotron-based x-ray photoelectron spectroscopy (XPS), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), and photoluminescence (PL) to elucidate atomic-scale structural and electronic modifications. Raman analysis reveals the emergence of Ce3+ and oxygen-vacancy-induced distortions, evident from peak broadening and shifts associated with B1g, F2g, and LO phonon modes. The extent of structural disorder is quantified from Raman intensity ratios and FWHM broadening, revealing damage region diameters of ∼0.31 ± 0.03 and ∼0.22 ± 0.03 nm, respectively. XPS confirms the partial reduction of Ce4+ to Ce3+ and Zr4+ to Zr3+, along with oxygen-vacancy formation that contributes to lattice relaxation and stabilization of the fluorite structure. UV–Vis DRS measurements show a decrease in optical bandgap from 3.37 to 2.71 eV and an increase in Urbach energy from 1.09 to 2.33 eV, indicating enhanced electronic disorder. PL intensity is quenched upon irradiation due to increased non-radiative recombination through defect centers. These findings provide a coherent spectroscopic framework to understand irradiation-driven redox and defect processes in Ce0.8Zr0.2O2. Its retained crystallinity while accommodating high defect densities highlights its promise as a radiation-tolerant matrix for advanced nuclear and extreme-environment applications.
- 25 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (26) , 13044-13060
Isovalent yet Dissimilar B-Site Occupants in Y2M2O7 Pyrochlore: Repercussions on Structure, Optical Properties, and Response under Extreme Conditions
Effective immobilization of nuclear waste requires advanced ceramics like pyrochlore (A2B2O7) that can accommodate diverse ions present in waste streams over long periods of time under extreme conditions. While A-/B-site substitutions are well-studied, the impact of an isovalent yet dissimilar ion at the B-site on the structure, electronic environment, and response to extreme conditions remains underexplored. This study investigates Ge4+ incorporation in Y2Ti2O7 (YTO), motivated by its distinct coordination preference compared to Ti4+. A systematic analysis is conducted on variations in the bulk structure (XRD), anionic sublattice (Raman), local polyhedral changes (XAS), and A-site effects (Eu3+-PL). Despite favorable features, only 30 mol % Ge could substitute in YTO beyond which the anionic sublattice distorts to accommodate the cation's preference for 4-fold coordination, ultimately leading to phase separation. Eu3+ emission confirms A-site polyhedral distortion upon the B-site modification. No phase transitions were observed until 1200 °C and both lattice and bulk thermal expansion coefficients decreased with Ge content. Gamma irradiation (up to 1000 kGy) left the lattice intact, but swift heavy-ion (100 MeV I) exposure induced partial amorphization, with greater damage in Ge-containing YTO. These comprehensive investigations into structural stability and extreme condition response offer valuable insights for designing effective nuclear waste immobilization materials.
- 25 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (26) , 13044-13060
Isovalent yet Dissimilar B-Site Occupants in Y2M2O7 Pyrochlore: Repercussions on Structure, Optical Properties, and Response under Extreme Conditions
Effective immobilization of nuclear waste requires advanced ceramics like pyrochlore (A2B2O7) that can accommodate diverse ions present in waste streams over long periods of time under extreme conditions. While A-/B-site substitutions are well-studied, the impact of an isovalent yet dissimilar ion at the B-site on the structure, electronic environment, and response to extreme conditions remains underexplored. This study investigates Ge4+ incorporation in Y2Ti2O7 (YTO), motivated by its distinct coordination preference compared to Ti4+. A systematic analysis is conducted on variations in the bulk structure (XRD), anionic sublattice (Raman), local polyhedral changes (XAS), and A-site effects (Eu3+-PL). Despite favorable features, only 30 mol % Ge could substitute in YTO beyond which the anionic sublattice distorts to accommodate the cation's preference for 4-fold coordination, ultimately leading to phase separation. Eu3+ emission confirms A-site polyhedral distortion upon the B-site modification. No phase transitions were observed until 1200 °C and both lattice and bulk thermal expansion coefficients decreased with Ge content. Gamma irradiation (up to 1000 kGy) left the lattice intact, but swift heavy-ion (100 MeV I) exposure induced partial amorphization, with greater damage in Ge-containing YTO. These comprehensive investigations into structural stability and extreme condition response offer valuable insights for designing effective nuclear waste immobilization materials.
- 16 May 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (21) , 10513-10525
Cocktail Effect at the B-Site of Hexagonal ABO3: Structural Evolution and High Entropy Low Loss Dielectrics
High entropy oxides provide an exciting avenue to obtain superior functionalities. However, stabilizing high entropy oxides containing equimolar components is a challenge in structures that are highly sensitive to the size of constituting ions. Hexagonal ABO3 (P63cm) is one such structural class that shows improper ferroelectricity due to non-centrosymmetric placement of ions. The motivation for this work was to stabilize a high entropy YInO3-based hexagonal composition, which has not been reported earlier, and its impact on electrical properties. Tailoring synthesis conditions yielded single-phasic hexagonal polymorphs for YInO3, Y(In0.5Mn0.5)O3, Y(In0.33Mn0.33Fe0.33)O3, and Y(In0.25Mn0.25Fe0.25Ga0.25)O3. Sharp XRD peaks with very broad Raman modes and decrease in the grain size support a single hexagonal phase with strong randomization. Entropy stabilization was established by positive enthalpy of formation determined by Calvet-calorimetry. These hexagonal polymorphs have differential thermal expansions, with a/b-axes showing double expansion compared to c-axis, which is attributed to unbuckling of BO5 layers that provides a buffer in the c-direction. Interestingly, as the B-site randomizes, BO5 polyhedra become more regular, accompanied by an increase in the B-Oplanar-B angle, which increases local symmetry and tends to reduce inherent polarization. Y(In0.25Mn0.25Fe0.25Ga0.25)O3 exhibits a low dielectric loss of ∼0.0085 and an ultra-low leakage current of 5.2 × 10-10A/cm2 (upto 150 °C), an order of magnitude improvement over YInO3.
- 16 May 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (21) , 10513-10525
Cocktail Effect at the B-Site of Hexagonal ABO3: Structural Evolution and High Entropy Low Loss Dielectrics
High entropy oxides provide an exciting avenue to obtain superior functionalities. However, stabilizing high entropy oxides containing equimolar components is a challenge in structures that are highly sensitive to the size of constituting ions. Hexagonal ABO3 (P63cm) is one such structural class that shows improper ferroelectricity due to non-centrosymmetric placement of ions. The motivation for this work was to stabilize a high entropy YInO3-based hexagonal composition, which has not been reported earlier, and its impact on electrical properties. Tailoring synthesis conditions yielded single-phasic hexagonal polymorphs for YInO3, Y(In0.5Mn0.5)O3, Y(In0.33Mn0.33Fe0.33)O3, and Y(In0.25Mn0.25Fe0.25Ga0.25)O3. Sharp XRD peaks with very broad Raman modes and decrease in the grain size support a single hexagonal phase with strong randomization. Entropy stabilization was established by positive enthalpy of formation determined by Calvet-calorimetry. These hexagonal polymorphs have differential thermal expansions, with a/b-axes showing double expansion compared to c-axis, which is attributed to unbuckling of BO5 layers that provides a buffer in the c-direction. Interestingly, as the B-site randomizes, BO5 polyhedra become more regular, accompanied by an increase in the B-Oplanar-B angle, which increases local symmetry and tends to reduce inherent polarization. Y(In0.25Mn0.25Fe0.25Ga0.25)O3 exhibits a low dielectric loss of ∼0.0085 and an ultra-low leakage current of 5.2 × 10-10A/cm2 (upto 150 °C), an order of magnitude improvement over YInO3.
- Open Access
- 25 March 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (13) , 13080-13104
Scheelite Catalysts for Thermal Mineralization of Toluene: A Mechanistic Overview
Toluene, a highly stable aromatic hydrocarbon, is utilized as a benchmark molecule for thermal mineralization by the catalytic community. Mostly, the catalysts used for toluene mineralization either use platinum group metals (PGM) as catalysts or are regulated by a plasma incinerator. Though these catalysts/processes promise better efficiency and lower reaction temperature, they are neither cost-effective nor do they produce thermally stable byproducts. However, most of the metal-oxide catalysts used for toluene degradation are less efficient owing to incomplete mineralization and formation of stable intermediates, which results in higher mineralization temperature. The present work showcases tungsten- and molybdenum-based Scheelites [BaXO4 (X = W, Mo, and Mo0.5W0.5)], which have been utilized for toluene mineralization at ∼200 °C. The intermediates formed during adsorption and thermal reaction are deciphered as a function of temperature using in situ FT-IR studies including their kinetic behavior. These surface intermediates formed over the Scheelite catalysts under an oxidative/inert atmosphere elucidate the toluene mineralization mechanism as a function of temperature/time. The surface active sites for these oxide catalysts for both adsorption and formation of reaction intermediates are deciphered using detailed X-ray photoelectron spectroscopy (XPS) studies. It shows the effective role of the oxidation states of constituent oxides M-O (M = Mo/ W) in the reaction mechanism. Mineralization of toluene in a nonoxidative atmosphere shows a Mars and Van Krevelen (MVK) type of mechanism, suggesting participation of lattice oxygen for the catalytic reaction. To the best of our knowledge, this work represents one of the lowest temperatures achieved for toluene mineralization using oxide catalysts. The identification of reaction intermediates can guide further optimization efforts to minimize the mineralization temperature.
- 25 March 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (13) , 13080-13104
Open AccessScheelite Catalysts for Thermal Mineralization of Toluene: A Mechanistic Overview
Toluene, a highly stable aromatic hydrocarbon, is utilized as a benchmark molecule for thermal mineralization by the catalytic community. Mostly, the catalysts used for toluene mineralization either use platinum group metals (PGM) as catalysts or are regulated by a plasma incinerator. Though these catalysts/processes promise better efficiency and lower reaction temperature, they are neither cost-effective nor do they produce thermally stable byproducts. However, most of the metal-oxide catalysts used for toluene degradation are less efficient owing to incomplete mineralization and formation of stable intermediates, which results in higher mineralization temperature. The present work showcases tungsten- and molybdenum-based Scheelites [BaXO4 (X = W, Mo, and Mo0.5W0.5)], which have been utilized for toluene mineralization at ∼200 °C. The intermediates formed during adsorption and thermal reaction are deciphered as a function of temperature using in situ FT-IR studies including their kinetic behavior. These surface intermediates formed over the Scheelite catalysts under an oxidative/inert atmosphere elucidate the toluene mineralization mechanism as a function of temperature/time. The surface active sites for these oxide catalysts for both adsorption and formation of reaction intermediates are deciphered using detailed X-ray photoelectron spectroscopy (XPS) studies. It shows the effective role of the oxidation states of constituent oxides M-O (M = Mo/ W) in the reaction mechanism. Mineralization of toluene in a nonoxidative atmosphere shows a Mars and Van Krevelen (MVK) type of mechanism, suggesting participation of lattice oxygen for the catalytic reaction. To the best of our knowledge, this work represents one of the lowest temperatures achieved for toluene mineralization using oxide catalysts. The identification of reaction intermediates can guide further optimization efforts to minimize the mineralization temperature.
- 20 January 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (7) , 3701-3714
Higher stability of nanophase Gd 2 O 3 –CeO 2 upon 400 keV Kr + ion irradiation over bulk: role of defect annealing across grain boundaries
The concept of inert matrix fuel (IMF) has been proposed to utilize the energetic value of Pu and transmute minor actinides in nuclear reactors. In order to offset the initial reactivity of nuclear fuel, gadolinium (Gd3+) is employed as a burnable poison, owing to its high neutron absorption cross-section. To gain insights into the radiation stability and influence of grain boundaries on irradiation behaviour, 5 mol% Gd-doped ceria samples, sintered at varying temperatures, were subjected to irradiation using 400 Kr+ ions. In order to examine the correlation between the radiation response and variations in particle size, a variety of characterization techniques were employed, including X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) studies. The study employed systematic methodologies to investigate the structural, chemical, and spectroscopic features of irradiated pellets. Gd2O3–CeO2 nano powders underwent sintering and palletization at 800 °C (S800), 1000 °C (S1000), and 1300 °C (S1300). Microstructural analysis via field emission scanning electron microscopy (SEM) revealed significant distinctions among the specimens. Glancing angle X-ray diffraction (GIXRD) and field emission scanning electron microscopy (FESEM) were performed on pristine samples to study the initial phase studies, crystal structure, variations in crystallite size and microstructures. Samples irradiated with 400 keV Kr+ were studied by GIXRD, Rietveld refinement analysis and Raman spectroscopy. None of the samples completely amorphized at the highest fluence of 1 × 1017 ions per cm2. Under low-energy ion beam irradiation, the nanosized ceria samples accumulate a larger number of defects (oxygen vacancies and Ce3+ resulting from Ce4+ reduction to maintain charge neutrality) compared to the μ-sized sample. To emulate the bombardment of ions into the material, SRIM and TRIM (computer simulations) were also performed to follow the paths of ions and their trajectories. Critical analysis elucidates that there is an exceptional radiation tolerance in nano-grained-sized samples in comparison to bulk grain-sized samples. The role of grain boundaries and the grain size effect in the nuclear energy loss regime (Sn) has been critically discussed in this study.
- 20 January 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (7) , 3701-3714
Higher stability of nanophase Gd 2 O 3 –CeO 2 upon 400 keV Kr + ion irradiation over bulk: role of defect annealing across grain boundaries
The concept of inert matrix fuel (IMF) has been proposed to utilize the energetic value of Pu and transmute minor actinides in nuclear reactors. In order to offset the initial reactivity of nuclear fuel, gadolinium (Gd3+) is employed as a burnable poison, owing to its high neutron absorption cross-section. To gain insights into the radiation stability and influence of grain boundaries on irradiation behaviour, 5 mol% Gd-doped ceria samples, sintered at varying temperatures, were subjected to irradiation using 400 Kr+ ions. In order to examine the correlation between the radiation response and variations in particle size, a variety of characterization techniques were employed, including X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) studies. The study employed systematic methodologies to investigate the structural, chemical, and spectroscopic features of irradiated pellets. Gd2O3–CeO2 nano powders underwent sintering and palletization at 800 °C (S800), 1000 °C (S1000), and 1300 °C (S1300). Microstructural analysis via field emission scanning electron microscopy (SEM) revealed significant distinctions among the specimens. Glancing angle X-ray diffraction (GIXRD) and field emission scanning electron microscopy (FESEM) were performed on pristine samples to study the initial phase studies, crystal structure, variations in crystallite size and microstructures. Samples irradiated with 400 keV Kr+ were studied by GIXRD, Rietveld refinement analysis and Raman spectroscopy. None of the samples completely amorphized at the highest fluence of 1 × 1017 ions per cm2. Under low-energy ion beam irradiation, the nanosized ceria samples accumulate a larger number of defects (oxygen vacancies and Ce3+ resulting from Ce4+ reduction to maintain charge neutrality) compared to the μ-sized sample. To emulate the bombardment of ions into the material, SRIM and TRIM (computer simulations) were also performed to follow the paths of ions and their trajectories. Critical analysis elucidates that there is an exceptional radiation tolerance in nano-grained-sized samples in comparison to bulk grain-sized samples. The role of grain boundaries and the grain size effect in the nuclear energy loss regime (Sn) has been critically discussed in this study.
- 7 January 2025
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 45 (6)
Tuning thermophysical properties of zirconate pyrochlore systems: B-site driven non-stoichiometric approach
- 7 January 2025
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 45 (6)
Tuning thermophysical properties of zirconate pyrochlore systems: B-site driven non-stoichiometric approach