LELuís Felipe Espíndola-Castro

Luís Felipe Espíndola-Castro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Luís Felipe Espíndola-Castro has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of different cariostatic agents on the surface roughness and color change of CAD–CAM‐milled restorative materials: An in vitro comparative study

    by Vitória Mendes Souza e Melo, Emanuel Ewerton Mendonça Vasconcelos, Jacksuel Azevedo Melo, Gabriela Queiroz de Melo Monteiro, Fernanda Donida Ortigoza, André Galembeck, Luís Felipe Espíndola‐Castro

    Purpose: To evaluate the influence of different cariostatic agents: 38% silver diamine fluoride (SDF), 38% SDF + potassium iodide (RS), and nano silver fluoride (NSF) compared with distilled water (control), on the surface roughness and color change of CAD–CAM‐milled restorative materials: nanoceramic resin (NR), feldspathic ceramic (FC), and lithium disilicate ceramic (LD). Materials and Methods: Thirty‐two specimens of each material were fabricated and allocated into four experimental groups ( n = 8). The specimens underwent repeated applications of the cariostatic agents (3 min, repeated six times) and were evaluated for surface roughness (∆Ra) by profilometry and for color change using a digital spectrophotometer, with analysis based on the CIEDE2000 system (∆ E 00 ). Data were analyzed using two‐way analysis of variance (ANOVA), followed by one‐way ANOVA or Kruskal–Wallis tests with appropriate post hoc comparisons and Bonferroni correction ( α = 0.05). Results: A statistically significant interaction was observed between restorative material type and the applied cariostatic agent. SDF produced the greatest increases in roughness, especially in LD (∆Ra = 0.232) and FC (∆Ra = 0.126), compared with the control group ( p < 0.001), and color‐change values far above clinically acceptable thresholds (∆ E 00 = 30.56–45.72; p < 0.001). Potassium iodide application after SDF (RS) showed low color change across all restorative materials (∆ E 00 = 0.28–0.75) and increased roughness in the FC. NSF showed behavior similar to the control group in terms of roughness and maintained color‐change values within acceptable limits (∆ E 00 = 0.57–1.35). Conclusions: SDF may compromise the surface roughness and color change of CAD–CAM‐milled restorative materials, whereas NSF and RS show potential as more favorable alternatives for the evaluated outcomes.

  • Open Access

    Effect of Nano-Silver Fluoride Containing 2000 ppm Silver Nanoparticles on the Microhardness and Color of Flowable Resin Composites: An In Vitro Pilot Study

    by Emanuel Ewerton Mendonça Vasconcelos, Maria Clara Müller de Andrade, André Galembeck, Gabriela Queiroz de Melo Monteiro, Fernanda Donida Ortigoza, Luís Felipe Espíndola-Castro

    Although the modification of resin composites with antimicrobial agents represents a viable alternative for biofilm inhibition, these changes may compromise the optical and mechanical properties of dental restorations. This in vitro pilot study evaluated the effect of incorporating Nano-Silver Fluoride (NSF) containing 2000 ppm silver nanoparticles (AgNPs) on the microhardness and color of flowable resin composites: Vittra APS Unique Flowable (VA), Filtek Bulk Fill Flowable (FB), and Filtek Supreme Flowable (FS). The resin composites were modified by adding 1 wt%, 2 wt%, and 4 wt% NSF and compared with an unmodified group (control). NSF was characterized by UV–visible spectroscopy and transmission electron microscopy. The specimens were subjected to Vickers microhardness testing and color analysis using the CIEDE2000 (ΔE00) and CIELAB (ΔE) systems. NSF incorporation had a material-dependent effect on microhardness. The VA group showed a progressive reduction in microhardness with increasing NSF additions, whereas the FS group remained unchanged up to the concentration of 2 wt%, and the FB group showed no significant reduction in microhardness at any of the tested concentrations compared with the control (p = 0.549). All resin composites exhibited clinically relevant color changes that increased with the NSF concentration, with more pronounced color changes in the VA group, whereas FB and FS did not vary significantly with the addition of different NSF concentrations. Overall, NSF mainly affected the optical properties, with esthetic limitations being the main challenge to be overcome in further studies. The FB and FS groups at 1 wt% and 2 wt% showed smaller chromatic changes than VA, without compromising microhardness, and appear promising for future investigations, including antimicrobial and cytotoxicity analyses.


  • Open Access

    Evaluation of physicomechanical and optical properties of bioactive glass (BAG)-filled resin composites: an in vitro study

    by Yan Victor Silva De Santana, Emanuel Ewerton Mendonça Vasconcelos, Gabriela Queiroz de Melo Monteiro, Agna Roberta Xavier Bezerra, Luis Felipe Espíndola-Castro

    Objective: To evaluate the behavior of bioactive glass (BAG)-filled resin composites (Beautifil II / Shofu—BR and Beautifil Flow Plus / Shofu—BF) compared with conventional resin composites (Filtek Z350 XT / Solventum—ZR and Filtek Supreme Flowable Restorative / Solventum—FS) by means of microhardness, sorption, solubility, and color stability tests. Materials and methods: For these analyses, ten specimens were fabricated per group using a split metal mold (15 mm in diameter × 1 mm thickness). Microhardness (n = 10) was measured using a digital microhardness tester, based on the mean of three indentations per specimen under a 2.94 N load for 15 s. For the sorption and solubility tests, five out of the 10 specimens used in the microhardness assays were randomly selected (n = 5), and ISO 4049/2019 recommendations were followed. Color stability was assessed using a digital spectrophotometer by comparing specimens immersed in coffee (using the five specimens not selected for the sorption and solubility tests / n = 5) and distilled water (control, using the same specimens from the sorption and solubility tests), with measurements obtained at baseline, after 1 day, and after 1 week of immersion. Color change (ΔE) was calculated using CIELAB parameters. Results: For microhardness, the high-viscosity resin composites (ZR and BR) showed significantly higher mean values than their low-viscosity versions (p < 0.001). Although sorption differed significantly among groups (p = 0.001), all resin composites exhibited values within the limits established by ISO 4049/2019. No statistically significant differences were observed for solubility. Regarding color stability, after 7 days in coffee, BR and ZR exhibited the greatest color changes (ΔE). Despite the observed statistical differences, the changes remained within acceptable clinical limits. Conclusion: BAG-filled resin composites exhibit properties comparable to those of conventional resin composites. The ZR resin composite showed higher microhardness; however, for the other evaluated parameters (sorption, solubility, and color stability in coffee), the tested resin composites exhibited values within the limits recommended by ISO 4049:2019 and were comparable to those of the reference conventional high- or low-viscosity resin composite.

  • Open Access

    Evaluation of physical, chemical, and color‐matching properties of monochromatic resin composites: An in vitro study

    by Ericka dos Santos Lopes, Mayara Evelly Duarte de Lima, Emanuel Ewerton Mendonça Vasconcelos, Natália Gomes de Oliveira, Gabriela Queiroz de Melo Monteiro, Luís Felipe Espíndola‐Castro

    The objectives of this study are to evaluate, in vitro, the microhardness, sorption, solubility, color stability, and color‐matching ability of monochromatic resin composites: Palfique Omnichroma / Tokuyama (Mono1) and Vittra APS Unique / FGM (Mono2) compared with the conventional resin composite: Filtek Z250 XT / Solventum (Conv). For this analysis, ten disc‐shaped composite specimens were prepared for each group for the microhardness, sorption, solubility, and color stability tests. To evaluate color‐matching ability, 36 tooth specimens were obtained from the buccal/lingual surfaces of human molars ( n = 12). The teeth were restored, and color compatibility was assessed with a digital spectrophotometer (Vita Easy Shade) and visually. Microhardness and sorption were higher in the Conv group. However, sorption values are within the limits established by ISO 4049/2019 for all groups. No significant difference in solubility or visual color match was noted. However, the conv group demonstrated superior color‐matching in the spectrophotometer analysis. After 7 days of coffee immersion, the Mono 1 group showed slightly less pigmentation. Monochromatic resin composites demonstrated physicochemical and organoleptic properties comparable to those of the evaluated conventional resin composites, suggesting similar compatibility and a potential option for simplifying clinical restorative protocols.


  • Open Access

    Plastic of Smile: Adhesive Fixed Dental Prosthesis, Fiberglass Post Restoration, and Direct Veneers in Resin Composite

    by Cláudio Eufrásio Medeiros Lins, Amina Kadja Martins Cahu, Marlon Ferreira Dias, Glaucia Danielle Ferreira da Silva, Natália Gomes de Oliveira, Luís Felipe Espíndola-Castro

    Tooth loss, darkened teeth, and disproportionate shape and size of teeth can compromise the way an individual sees themselves and their interpersonal relationships. The present study aims to report a case report of a plastic smile. After initial clinical examinations, it was proposed to perform an adhesive-fixed dental prosthesis, fiberglass post-restoration, and direct veneers in resin composite. For tooth 11, which had extensive coronary damage, a fiberglass post-restoration was performed. The fiberglass post was cemented with dual resin cement and the tooth was sculpted using the indirect resin composite technique. For the tooth loss (13), an adhesive fixed dental prosthesis was made of fiberglass, with wear of the abutment teeth (12 and 14) to support the prosthesis. From teeth 14 to 24, wear to veneers was performed. The veneers were implemented with resin composed by the direct hands-free technique. Treatment was completed with occlusal adjustments, finishing, and polishing. Rehabilitation treatment performed emphasizes the importance of associating adequate planning, dentist dexterity, and the choice of materials and techniques used.

  • Open Access

    Fracture Resistance of Extensively Compromised Anterior Teeth Restored With Fiberglass Posts and Biomimetic Protocols: An In Vitro Study

    by Chiu Tzyy Haur, Emanuel Ewerton Mendonça Vasconcelos, Natália Gomes de Oliveira, Gabriela Queiroz de Melo Monteiro, Luís Felipe Espíndola‐Castro

    Objective: Polyethylene fiber (PF) and fiberglass (FG) posts have been recommended for intraradicular anchorage when there is a significant loss of coronal structure. However, few studies have evaluated their performance in anterior teeth combined with direct restorations as an alternative to single crowns. The objective of this study is to compare the fracture resistance and failure modes of endodontically treated anterior teeth restored with a FG post, a biomimetic technique using PF, and a direct resin composite (RC). Materials and Methods: Forty sound upper central incisors were selected, endodontically treated, standardized for clinical crown height, and randomly distributed into four groups ( n = 10): Positive control: teeth with an intact clinical crown, subjected only to access and endodontic treatment (CT), RC, PF, and FG post. Restorations were performed according to specific clinical protocols using a universal adhesive system. Fracture resistance was tested on a universal testing machine under compressive load at a 45° angle (1 mm/min). Fracture patterns were analyzed under a stereomicroscope and classified as either repairable or catastrophic. Data were analyzed using ANOVA and Fisher's exact test ( α = 0.05). Results: The CT group exhibited the highest mean resistance (840 N), followed by PF (740 N), FG (700 N), and RC (480 N), with a significant difference between the RC group and the others ( p < 0.001). No significant difference was found among the groups regarding the failure mode ( p > 0.05). Conclusion: FGs and PFs provided greater fracture resistance and a higher incidence of repairable fractures, with more favorable outcomes than when the procedure is performed exclusively with RC restorations.

  • Open Access

    FACETA UNITÁRIA CERÂMICA ASSOCIADO A PINO DE FIBRA DE VIDRO COM LUVA ANATÔMICA: RELATO DE CASO

    by Luís Felipe Espíndola-Castro, Emília de Rodat Gondim de Farias Rabelo Tabosa, Emanuel Ewerton Mendonça Vasconcelos, Lucas Lucas Rodrigues, Claudio Heliomar Vicente Silva, Renata Pedrosa Guimarães, Hilcia Mezzalira Teixeira, Alexandre Batista Lopes Nascimento

    Alteração de coloração dentária é uma das principais desarmonias percebidas a nível de conversação e motiva os indivíduos a buscarem procedimentos que corrijam tal alteração. O objetivo deste trabalho é relatar um caso clínico para correção de um substrato dentário escurecido por meio da associação do clareamento dentário e faceta unitária em cerâmica. O tratamento foi iniciado com clareamento dentário pela técnica combinada (2 sessões em consultório com peróxido de hidrogênio 35% e 21 dias de clareamento supervisionado com peróxido de carbamida 16% / 4h diárias). Em seguida, realizou-se o preparo para faceta por meio da técnica da silhueta, iniciando-se pela confecção da canaleta marginal com ponta diamantada esférica, seguido de sulcos longitudinais com ponta diamantada cilíndrica e uniformização dos sulcos com ponta diamantada tronco cônica. O preparo foi moldado com silicone de adição pela técnica de dupla impressão e enviado ao laboratório para confecção da faceta cerâmica em dissilicato de lítio. Para a cimentação da peça, a faceta foi tratada internamente com ácido fluorídrico 10% por 20 segundos, seguido de silano por 1 minuto e adesivo (sem polimerização). O dente foi tratado com ácido fosfórico 37% (30s em esmalte e 15s em dentina) e aplicação do adesivo (sem polimerização). A face interna da peça foi preenchida com cimento resinoso fotoativado e levada em boca sob pressão, realizando a remoção dos excessos de cimento com pincel e fotopolimerização de 40 segundos (em cada face). O tratamento empregado foi eficaz para correção de cor do substrato escurecido e harmonização do sorriso.

  • Open Access

    Evaluation of physical, chemical, and mechanical properties of a self-curing bulk-fill resin composite: An in vitro comparative study

    by Mg. Souza, Ee. Vasconcelos, Ct. Haur, Ng. Oliveira, Gq. Monteiro, Rp. Guimarães, Lf. Espíndola-Castro

    To evaluate the physical, chemical, and mechanical properties of the Stela Automix Bulk-fill resin composite / SDI (SBF) compared to the light-cured resin composites: Filtek Bulk Fill Flow / Solventum (FBF) and Opus Bulk Fill Flow / FGM (OBF). The properties assessed were microhardness, sorption, solubility, color stability, and degree of conversion. Ten samples measuring 15 mm (diameter) and 1 mm (thickness) of each material were fabricated (ISO 4049:2019). The samples were prepared and analyzed using standardized methods, including Vickers microhardness testing, sequential weighings on an analytical balance for sorption and solubility tests, CIELAB spectrophotometry for color stability assessment, and FTIR spectroscopy for determining the degree of conversion. The self-curing resin composite exhibited higher microhardness (p < 0.001) and degree of conversion (p = 0.009), as well as sorption and solubility values within acceptable limits, in accordance with ISO 4049:2019. However, the material exhibited greater staining in coffee, which may compromise its aesthetics. The self-curing resin composite tested demonstrates good overall performance and is a promising material for restorations requiring greater depth. Clinical significance: To minimize the inconvenience of pigmentation that this material undergoes, it is recommended to use it as a base material and cover it with another resin composite that offers superior color stability.


  • Evaluation of the cytotoxicity of new formulations of cariostatic agents containing nano silver fluoride: an in vitro study

    by Luís Felipe Espíndola-Castro, Rafael Antonio de Oliveira Ribeiro, Carlos Alberto de Souza Costa, Aronita Rosenblatt, André Galembeck, Gabriela Queiroz de Melo Monteiro

    The objective of the study was to assess the indirect cytotoxicity of 600 ppm and 1500 ppm nano silver fluoride (NSF) compared to other commercial cariostatic agents. 56 dentin discs with 0.4 mm in thickness were obtained from intact human molars and adapted to artificial pulp chambers (APCs). The discs were divided into seven groups according to treatment (n = 8): no treatment (positive control—PC), 29% hydrogen peroxide (negative control—NC), 30% Cariestop (CS30), 38% Riva Star (RS38), 38% Advantage Arrest (AA38), 600 ppm NSF (NSF600), and 1500 ppm NSF (NSF1500). The cariostatic agents were applied on the occlusal surface of the dentin discs (facing upward), and the pulp surface (facing downward) remained in contact with the culture medium. Immediately after the treatments, the extracts (DMEM + cariostatic agent components diffused through the discs) were collected and applied to MDPC-23 cells, which were assessed for viability (CV—alamarBlue, live/dead), adhesion/spreading (F-actin), alkaline phosphatase (ALP) activity, and mineralization nodule (MN) formation. The data were statistically analyzed by ANOVA/Games–Howell (p = 0.05). CV and ALP activity in CS30, RS38, AA38, and NSF600 were similar to PC (p > 0.05). MN formation significantly decreased only in NC, CS30, RS38, and AA38 compared to PC (p < 0.001). Only NSF600 and NSF1500 did not differ from PC (p > 0.05) with mineralization nodules, and this specific cell activity significantly decreased in all other groups (p < 0.05). NSF solutions (600 ppm and 1500 ppm) did not cause transdentinal toxicity on MDPC-23 cells.


  • Open Access

    Percepções sobre a plataforma Google Classroom como ferramenta de apoio ao ensino-aprendizagem durante a pandemia da COVID-19

    by Bianca Maria Beserra Costa, Jorge Miguel Albrecht Ribeiro Filho, Paulo Maurício Reis de Melo Júnior, Sandra Maria Alves Sayão Maia, Luciano Barreto Silva, Natália Gomes de Oliveira, Luís Felipe Espíndola-Castro, Marina da Cunha Isaltino, Pâmella Recco Álvares, Juliana Syndia Silva Santos Sousa, et al.

    Neste trabalho, objetivou-se avaliar a percepção dos estudantes da Faculdade de Odontologia de Pernambuco sobre o uso do aplicativo Google Classroom, como ferramenta de apoio ao ensino-aprendizagem durante o período suplementar letivo trans pandêmico. A amostra foi composta por 100 alunos do primeiro ao décimo período. O formulário on-line foi constituído por 19 itens de múltipla escolha e os resultados foram tabulados pela própria plataforma em planilhas (via Google Sheets), sendo visualizados em gráficos. Para tanto, os estudantes tiveram acesso ao convite da pesquisa através de um link do formulário on-line, que foi encaminhado pelo pesquisador por meio de mensagens aos grupos de WhatsApp das turmas de estudantes. Os dados foram analisados mediante estatística descritiva (média e desvio padrão, valor máximo e mínimo), considerando como nível de significância p-valor ≤ 0,05 para um intervalo de confiança de 95%. Os estudantes da Faculdade de Odontologia de Pernambuco aprovaram a usabilidade e interação do aplicativo Google Classroom como ferramenta virtual de ensino-aprendizagem, mostrando-se adequado e eficaz, quando utilizado nas disciplinas cursadas no período letivo suplementar, durante a pandemia da COVID-19.