Ich Long Ngo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ich Long Ngo has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Van Tuyen Vu
Hanoi University of Science and Technology (HUST)
4 shared publicationsThe Khanh Lai
Hanoi University of Science and Technology (HUST)
3 shared publications- The Khanh Lai
Springfield Campus, QLD 4300, Australia
3 shared publications Viet Dung Duong
School of Aerospace Engineering, University of Engineering and Technology, Vietnam National University, Hanoi, Vietnam
3 shared publications- Viet Dung Duong
School of Aerospace Engineering, University of Engineering and Technology, Vietnam National University 3 , Hanoi
3 shared publications - Dang Dinh Nguyen
School of Mechanical Engineering , Kyungpook National University , Daegu, South Korea
2 shared publications
Latest Publications
- 2 February 2026
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 13 (3) , 1135-1146
Achieving High Power and Energy Efficiency for Microfluidic Fuel Cells with Flow-through Porous Electrodes at the Desired Cell Voltage and Fuel Flow Rate with Deep Learning-based Multi-target and Criteria Optimization
- 2 February 2026
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 13 (3) , 1135-1146
Achieving High Power and Energy Efficiency for Microfluidic Fuel Cells with Flow-through Porous Electrodes at the Desired Cell Voltage and Fuel Flow Rate with Deep Learning-based Multi-target and Criteria Optimization
- 18 December 2025
- Published by ASME International in Journal of Fluids Engineering
- Vol. 148 (2)
A Comprehensive Study on Improving the Electrohydrodynamic Performance of Electroconjugate Fluid Micropumps Using Hydrodynamic-Shaped Electrodes
A novel design of an electroconjugate fluid (ECF) micropump with hydrodynamic-shaped electrodes was proposed in this study. The finite element method was employed to comprehensively investigate the dynamic behavior of ECF flow in this micropump under various conditions, including electrode types, applied voltage (Ve), the anode–cathode distance (Lc*), the slit width (Ws*), and the cathode width (Wn*). Consequently, the ECF micropump's operating range and efficiency are significantly improved using a hydrodynamic-shaped electrode compared to conventional electrodes. Furthermore, this study first proposes a generalized correlation to effectively predict the maximum pressure difference, revealing that it obeys the quadratic law of Ve. The performance curves of the novel ECF micropump under the effects of various designed parameters are elaborately constructed. Based on an extensive study, the optimum range of these parameters is proposed as 2.85 ≤ Lc* ≤ 3.15, 1.71 ≤ Ws* ≤ 1.89, and 3.33 ≤ Wn* ≤ 3.68. Particularly, the remarkable efficiency is up to 30%. This significant improvement addresses the historically low efficiency of the ECF micropump, opening up new possibilities for its application in industries demanding high performance and efficient fluid control systems.
- 18 December 2025
- Published by ASME International in Journal of Fluids Engineering
- Vol. 148 (2)
A Comprehensive Study on Improving the Electrohydrodynamic Performance of Electroconjugate Fluid Micropumps Using Hydrodynamic-Shaped Electrodes
A novel design of an electroconjugate fluid (ECF) micropump with hydrodynamic-shaped electrodes was proposed in this study. The finite element method was employed to comprehensively investigate the dynamic behavior of ECF flow in this micropump under various conditions, including electrode types, applied voltage (Ve), the anode–cathode distance (Lc*), the slit width (Ws*), and the cathode width (Wn*). Consequently, the ECF micropump's operating range and efficiency are significantly improved using a hydrodynamic-shaped electrode compared to conventional electrodes. Furthermore, this study first proposes a generalized correlation to effectively predict the maximum pressure difference, revealing that it obeys the quadratic law of Ve. The performance curves of the novel ECF micropump under the effects of various designed parameters are elaborately constructed. Based on an extensive study, the optimum range of these parameters is proposed as 2.85 ≤ Lc* ≤ 3.15, 1.71 ≤ Ws* ≤ 1.89, and 3.33 ≤ Wn* ≤ 3.68. Particularly, the remarkable efficiency is up to 30%. This significant improvement addresses the historically low efficiency of the ECF micropump, opening up new possibilities for its application in industries demanding high performance and efficient fluid control systems.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
A generalized correlation for predicting microdroplet sizes in a squeezer T-junction microfluidic device with various squeezer types
This paper describes an extensive study on the dynamic behaviors of droplet formation in a Squeezer T-junction Microfluidic Device (STMFD) with various squeezers. The effects of squeezer size (Ws), squeezer location (Ls), water fraction (wf), and capillary number (Ca) on the droplet formation in this device were explored. The two-phase fluid flow in the microchannel is captured using the two-dimensional finite volume method and the volume of fluid model. This study aims to determine the squeezer shape, size, and position to expand the stable droplet formation region and generate uniform-sized droplets efficiently. Consequently, the droplet formation regime, droplet size, and droplet generation frequency are affected significantly by the presence of the squeezers. A rectangle-shaped squeezer design shows the most effective generation in the squeezing mode among the shapes considered. Then, phase diagrams of the droplet formation are constructed elaborately for this squeezer-shaped design. Particularly, a generalized correlation as a function of four important parameters (Ws, Ls, wf, and Ca) is first proposed to quickly and effectively predict the droplet size in the STMFD for various squeezer types. These results enhance the understanding of microdroplet dynamics in T-junction devices, offering potential applications in biomedical and drug delivery systems.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
A generalized correlation for predicting microdroplet sizes in a squeezer T-junction microfluidic device with various squeezer types
This paper describes an extensive study on the dynamic behaviors of droplet formation in a Squeezer T-junction Microfluidic Device (STMFD) with various squeezers. The effects of squeezer size (Ws), squeezer location (Ls), water fraction (wf), and capillary number (Ca) on the droplet formation in this device were explored. The two-phase fluid flow in the microchannel is captured using the two-dimensional finite volume method and the volume of fluid model. This study aims to determine the squeezer shape, size, and position to expand the stable droplet formation region and generate uniform-sized droplets efficiently. Consequently, the droplet formation regime, droplet size, and droplet generation frequency are affected significantly by the presence of the squeezers. A rectangle-shaped squeezer design shows the most effective generation in the squeezing mode among the shapes considered. Then, phase diagrams of the droplet formation are constructed elaborately for this squeezer-shaped design. Particularly, a generalized correlation as a function of four important parameters (Ws, Ls, wf, and Ca) is first proposed to quickly and effectively predict the droplet size in the STMFD for various squeezer types. These results enhance the understanding of microdroplet dynamics in T-junction devices, offering potential applications in biomedical and drug delivery systems.
- Open Access
- 9 August 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Vietnam Journal of Mechanics
Numerical investigation of electro-conjugate fluid micro-pump under the effects of downstream angle and the negative electrode width
This paper describes a numerical study of the electro-hydrodynamic behaviors of the fluid flow in an electro-conjugate fluid (ECF) micro-pump under the effects of the collector electrode width (Lc) and its downstream angle (α2). The finite element method was used to examine the characteristics of the ECF micro-pump with the applied voltage ranging from 2 kV to 8 kV, Lc ranging from 0.0 to 4.0, and α2 ranging from 30º to 90º. Consequently, the numerical results indicated that the ECF flow characteristics and the operating ranges of this ECF micro-pump are affected significantly by α2 and Lc of the negative electrode. Indeed, the operating range of the ECF micro-pump can be further extended by reducing α2, particularly at higher flow rates. Moreover, the operating ranges of both pressure difference (∆p) and flow rate of the ECF micro-pump can be extended when Lc varies in the optimum range, i.e., from 0.5 to 2.0. The maximum efficiency of such an ECF micro-pump was 7.4% at φ0 = 8 kV and Lc = 2.0. These results play a critical role in understanding the electro-hydrodynamic behaviors of the fluid flow in an ECF micro-pump, and they can be applied in mechanical and biomedical engineering fields.
- 9 August 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Vietnam Journal of Mechanics
Open AccessNumerical investigation of electro-conjugate fluid micro-pump under the effects of downstream angle and the negative electrode width
This paper describes a numerical study of the electro-hydrodynamic behaviors of the fluid flow in an electro-conjugate fluid (ECF) micro-pump under the effects of the collector electrode width (Lc) and its downstream angle (α2). The finite element method was used to examine the characteristics of the ECF micro-pump with the applied voltage ranging from 2 kV to 8 kV, Lc ranging from 0.0 to 4.0, and α2 ranging from 30º to 90º. Consequently, the numerical results indicated that the ECF flow characteristics and the operating ranges of this ECF micro-pump are affected significantly by α2 and Lc of the negative electrode. Indeed, the operating range of the ECF micro-pump can be further extended by reducing α2, particularly at higher flow rates. Moreover, the operating ranges of both pressure difference (∆p) and flow rate of the ECF micro-pump can be extended when Lc varies in the optimum range, i.e., from 0.5 to 2.0. The maximum efficiency of such an ECF micro-pump was 7.4% at φ0 = 8 kV and Lc = 2.0. These results play a critical role in understanding the electro-hydrodynamic behaviors of the fluid flow in an ECF micro-pump, and they can be applied in mechanical and biomedical engineering fields.
- 3 August 2025
- Published by Springer Nature
- p. 521-527
A Study on Enhancing the Performance of ECF Micropumps Under Various Parameters Using the Finite Element Method
- 3 August 2025
- Published by Springer Nature
- p. 521-527
A Study on Enhancing the Performance of ECF Micropumps Under Various Parameters Using the Finite Element Method
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Wake transition of flow past porous D-shaped cylinder near a moving wall
This comprehensive numerical study examines dynamic flow past a permeable D-shaped cylinder near a moving wall in a wide parameter space of porosity (10−4−0.8) and gap ratio (0.6−5) at Reynolds number of 150. Wake dynamics is classified into four regions: overshoot (OS), overshoot with wavy vortex street (PW), primary and meandering vortex street (PM), and co-shedding vortex shedding street (OP). Wake transitions of these regimes are highly switchable in parameter space, where gap ratio variation controls vortex shedding in intermediate and far wake. For small gap ratios, increasing porosity shifts the wake from PW to OS, enhancing shear layer stability. At moderate gap ratios, PM and OP occur, with OP requiring higher porosity due to flow penetration. Pressure coefficient distributions approach a rigid cylinder's as porosity decreases. Stagnation points shift toward the moving wall at small gap ratios but align with an isolated circular cylinder at large gap ratios. Higher porosity shifts stagnation points away from the wall at small gap ratios. Decreasing porosity reduces the time-averaged drag coefficient due to increased permeability. PM and OP regions show higher drag coefficient than OS and PW, exceeding those of single circular and square cylinders due to the moving wall. Lift coefficients approach a single circular cylinder's, except at small gap ratios, where the moving wall effect dominates. At large gap ratios, porosity has a minor effect on the fluctuation of lift coefficient, but a small gap ratio increases the maximum lift coefficient compared to a single circular cylinder.
- 1 August 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (8)
Wake transition of flow past porous D-shaped cylinder near a moving wall
This comprehensive numerical study examines dynamic flow past a permeable D-shaped cylinder near a moving wall in a wide parameter space of porosity (10−4−0.8) and gap ratio (0.6−5) at Reynolds number of 150. Wake dynamics is classified into four regions: overshoot (OS), overshoot with wavy vortex street (PW), primary and meandering vortex street (PM), and co-shedding vortex shedding street (OP). Wake transitions of these regimes are highly switchable in parameter space, where gap ratio variation controls vortex shedding in intermediate and far wake. For small gap ratios, increasing porosity shifts the wake from PW to OS, enhancing shear layer stability. At moderate gap ratios, PM and OP occur, with OP requiring higher porosity due to flow penetration. Pressure coefficient distributions approach a rigid cylinder's as porosity decreases. Stagnation points shift toward the moving wall at small gap ratios but align with an isolated circular cylinder at large gap ratios. Higher porosity shifts stagnation points away from the wall at small gap ratios. Decreasing porosity reduces the time-averaged drag coefficient due to increased permeability. PM and OP regions show higher drag coefficient than OS and PW, exceeding those of single circular and square cylinders due to the moving wall. Lift coefficients approach a single circular cylinder's, except at small gap ratios, where the moving wall effect dominates. At large gap ratios, porosity has a minor effect on the fluctuation of lift coefficient, but a small gap ratio increases the maximum lift coefficient compared to a single circular cylinder.
- 12 March 2025
- Published by Springer Nature in Marine Geophysical Research
- Vol. 46 (1) , 1-14
A comprehensive study of low-Reynold flow through two tandem cylinders with various configurations using the Lattice Boltzmann method
- 12 March 2025
- Published by Springer Nature in Marine Geophysical Research
- Vol. 46 (1) , 1-14
A comprehensive study of low-Reynold flow through two tandem cylinders with various configurations using the Lattice Boltzmann method
- 14 February 2025
- Published by Springer Nature
- p. 165-174
A Numerical Study on the Thermo-electrohydrodynamic Performance of ECF Micro-pumps
- 14 February 2025
- Published by Springer Nature
- p. 165-174
A Numerical Study on the Thermo-electrohydrodynamic Performance of ECF Micro-pumps
- 14 February 2025
- Published by Springer Nature
- p. 185-194
A DNS Simulation of the Low-Reynold Flow Through an Elliptical Cylinder Using the Lattice Boltzmann Method
- 14 February 2025
- Published by Springer Nature
- p. 185-194
A DNS Simulation of the Low-Reynold Flow Through an Elliptical Cylinder Using the Lattice Boltzmann Method
- 27 November 2024
- Published by Springer Nature in Theoretical and Computational Fluid Dynamics
- Vol. 39 (1) , 1-15
An analytical study of micro-droplet generation in microfluidic double T-junction devices under effects of channel depth ratio using VOF method
- 27 November 2024
- Published by Springer Nature in Theoretical and Computational Fluid Dynamics
- Vol. 39 (1) , 1-15
An analytical study of micro-droplet generation in microfluidic double T-junction devices under effects of channel depth ratio using VOF method