AYAndrii Yavorskyi

Andrii Yavorskyi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrii Yavorskyi has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Research on occurrence features and ways to improve the quality of productive hydrocarbon horizons demarcation

    by Ye. A Koroviaka, Ye. M Stavychnyi, O. B Martsynkiv, A. O Ihnatov, A. V Yavorskyi

    Purpose. On the base of the geological cross-section analysis of the productive stratum and the features of the filtration-capacitance characteristics of the reservoir rocks, to develop effective technological fastening schemes for the delimitation of closely located different-pressure and different-saturated horizons on the example of the Romny group deposits. Methodology. The proposed work is an analytical and production research on the geological-and-lithological structure features of borehole sections of the Romny structure and the results of their drilling and cementing based on the analysis of electrical, pulsed neutron-neutron, acoustic and other types of loggings. The data on the spectrum of the oil and gas boreholes properties cores was obtained on the basis of macroscopic description, methodical and practical methods of lithological, sedimentological, and facies analysis. The filtration capacity of permeable reservoir rocks was examined with the application of the Darcy’s device. Modern methods of experimental research analysis using mathematical and physical modeling techniques, methods for processing research results in SolidWorks, STATGRAPHICS, MATHSAD, EXCEL, control and measuring devices were applied. Findings. It has been established that currently applied fastening methods do not provide the prerequisites for high-quality delineation of productive horizons, as a result of which interlayer flows occur, that is lead to the loss of the potential flow rate of the boreholes and increasing in the cost of hydrocarbon production. A new design of the borehole is proposed in order to increase the reliability of the fastening. It has been proven that the effectiveness of opening oil-saturated reservoirs increases with the application of specialized drilling flushing fluids capable of minimizing the risk of their clogging. The necessity of cementing the production column and the shank with tamponage materials based on composite cements is substantiated, while effective buffer systems should be applied to separate process fluids. Originality. On the base of the systematization and correlation of the geophysical material, the specific features of the structure of the productive strata of B-18 and B-19 horizons were evaluated as well as the nature and degree of saturation, the filtration-capacity characteristics of the seams. It has been proven that in order to reliably cover the high-pressure water-bearing horizon B-18 with an operational column, it is recommended to include packer systems of various types of activation in the equipment. Practical value. On the basis of the detailed multifaceted results of laboratory and industrial testing and analytical model research, technological solutions have been developed for boreholes fastening in the conditions of the occurrence of closely located productive horizons of different pressures and different saturations on the example of the Romny group deposits.


  • THE INFLUENCE OF PSYCHOSOCIAL FACTORS ON THE DEVELOPMENT OF EMPLOYEE STRESS

    by Dnipro University of Technology, Olena Yavorska, Serhiy Cheberyachko, Svitlana Sokurenko, Oleh Mukha, Andrii Yavorskyi, Roman Zgersky

    Purpose. Determining the impact of the presence of psychosocial factors on the development of stress among employees when performing production tasks to develop recommendations for reducing their impact. Methodology. To identify stress resistance, some methods were used to determine «Resistance to stress», and to find out their relationship to work, the «Burnout Syndrome» questionnaire was used. The applied methods were developed by specialists of the Institute of Psychology named after H.S. Kostiuka. Based on the recommendations of the ISO 45003:2021 standard, a special questionnaire has been developed to determine dangerous psychosocial factors that lead to the appearance of stress in a worker, the answers to which were evaluated on a Likert scale with points from 0 to 4. Results. The developed system for assessing psychosocial factors will enable users to systematically observe the state of psychological health of employees, the psychological climate in the organization, respond in a timely manner to expected problems, and develop preventive and corrective actions to normalize the situation. The results of the study showed that the majority of respondents (61 %) determined the presence of unrealistic deadlines set by their managers. Another largest group of occupational hazard factors is «aspects of work organization», where almost 39 % of participants complain about overtime work. It was determined that 82.2 % of employees struggle to maintain a work/life balance, and 17.8 % feel imbalanced due to the need to work in their free time and the negative impact of work on the ability to recover. Scientific novelty. The relationship between the development of the stress load and the group of factors called «aspects of work organization» in terms of setting unrealistic deadlines for the performance of a given number of production tasks has been established. Practical significance. As a result of the research, it has been found out that in order to improve the psychosocial climate and reduce the level of psychosocial risks, it is necessary to: balance work in the field of psychosocial support at the enterprise; increase the level of stress resistance of employees; improve their mental health; improve the efficiency of the enterprise. Keywords: psychosocial factor, questionnaire, stress, social factors, work organization.


  • Open Access

    ANALYSIS OF OCCUPATIONAL RISK MANAGEMENT MODELS ACCORDING TO INTERNATIONAL STANDARDS

    by V. A. Tsopa, О. О. Yavorska, M. S. Brezitskа, S. I. Cheberyachko, O. V. Deryugin, A. V. Yavorskyi

    An analysis of professional risk management models according to international standards is proposed, taking into account the interpretation of the main terms (danger, risk, incident risk assessment), to build a uniform approach in occupational safety and health management systems in organizations. To solve the problem, the method of morphological analysis was used, which is based on the selection of possible solutions for assessing the technological feasibility of occupational risk management models and making a rational decision regarding the features of documenting the assessment of occupational risks using integrated approaches, which made it possible to specify the elements that form local, topological and metric spaces A comparison of the interpretation of the main terms that form models of occupational risk management was carried out, based on the requirements of the EU-OSHA Workplace Risk Assessment Guide, Guidelines for Occupational Safety and Health Management Systems ILO-BHP 2001, ISO 45001: 2018 Occupational health and safety management systems. Requirements and guidelines for application". Built in accordance with the requirements of the specified international standards, professional risk management models that take into account differences in the interpretation of terminology. The concepts of acceptability (permissibility) and non-acceptability (non-permissibility) of professional risks for their assessment are defined. It has been established that the main difference between ISO 45001:2018 and the existing international standards regarding the requirements for occupational risk management is the consideration of all hazardous occupational factors that can significantly affect both the probability of the occurrence of a hazardous event and the severity of the consequences, which requires a review of the matrix approach to assessment professional risks. Forms for documenting the assessment of occupational risk are proposed, in accordance with the requirements of the specified standards, which reflect their differences formed in the considered models. The scientific novelty consists in substantiating the impact of professional risk management models on their documentation procedure. Forms for documenting the assessment of occupational risk are proposed, in accordance with the requirements of the specified standards, which reflect their differences formed in the considered models. Recommendations have been developed regarding the relationship between dangerous factors of the organization's environment and their impact on the level of professional risks.


  • A risk of pulmonary diseases in miners while using dust respirators

    by S. I Cheberiachko, O. O Yavorska, A. V Yavorskyi, M. Yu Ikonnikov

    Purpose. To determine magnitudes of the occupational risks of respiratory disease (pneumoconiosis) occurrence in miners while using filter respirators on the basis of an exposure dust dose with the consideration of work experience. Methodology. To assess occupational risks, a new approach proposed by the Research Institute of Complex Hygiene and Occupational Diseases is used. The approach is based on determining an exposure dose of a hazardous substance entering the workers lungs during their professional contact with it taking into account the volume of pulmonary ventilation, the number of shifts, and work experience. Findings. Use of dust respirators reduces the risk of occupational respiratory diseases but does not eliminate it completely. It has been established that with more than three-year work experience and coal dust concentrations of more than 50 mg/m3, use of dust filter respirators does not ensure a minimal degree of the occupational disease risks. At the same time, it has been identified that if work experience is less than 3 years with the use of filter respirators, the risk of occupational diseases will be minimal. It has been proved that the risk assessment should involve using the minimal value of a protection factor of a respirator, which is fixed in the production environment. It has been shown that working within the areas with dust concentrations higher than 100 mg/m3 is dangerous for miners; over time, with the accumulation of sufficient dust in the lungs it will lead to the development of silicosis. Originality. It consists in scientific substantiation of the magnitude of occupational risk of respiratory diseases in miners, taking into account a real protection factor of respirators, which is determined at the workplace based on the calculation of an exposure dose and time of professional contact with hazardous substances. Practical value. The experience of safe operation in mine workings with and without using filter respirators has been substantiated, basing on a safe value of coal dust concentration, at which a low level of occupational risk of respiratory diseases is recorded. Recommendations for determining the dust load taking into account a protection factor of respirators at the workplace have been developed.


  • Elaboration of an integral system of company management by developing corporate and safety culture

    by V.A Tsopa, S.I Cheberiachko, O.O Yavorska, V.V Hilpert, A.V Yavorskyi

    Purpose. To develop a model of the integrated system for company management, basing on the integration of the quality control and labour safety systems that differs from the known ones by combination of the processes based on the increase in the level of corporate safety cultures within a company. Methodology. Formation of the basis for integration of the quality control and labour safety systems relies on the complex use of system analysis methods that, in combination with Deming and Shewhart cycle and with the performance of corresponding estimation and analysis of the organizational and safety cultures, help plan the practices, procedures, and resources for stage-by-stage combination of the systems as well as maintain the obtained results. Findings. An approach for efficient development of the integrated management system has been proposed on the basis of the analysis of levels of organizational and safety cultures; in future, this will help select such tools and practices that will allow having painless stage-by-stage combination of the available systems of quality control and labour safety with the substantiation of the necessary recourses. It has been established that a key element of the combination is readiness and motivation of not only top management but also linear management and ordinary workers to accept new technologies, approaches, and practices aimed at integration of those cultures, which is provided by the efficient staff involvement by means of corresponding training and constant communication to form the risk-oriented thinking. Originality. A structure and model of the integrated system of quality and safety management as a unified interdependent mechanism have been proposed on the basis of the combination of organizational and safety cultures; that has allowed forming the unified principles for the development of a combined management system. Practical value. The control parameters have been determined to identify stages of integration of the quality control and labour safety systems basing on the attitude to values and formed worldview as well as on the gaining the necessary competences by the workers.


  • Evaluating the risks of occupational respiratory diseases of coal mine workers

    by S.I. Cheberiachko, A.V. Yavorskyi, O.O. Yavorska, V.V. Tykhonenko

    Evaluating the risks of occupational respiratory diseases of coal mine workers