DKDaniil Klimov

Daniil Klimov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniil Klimov has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    IMPREGNATED ACTIVATED CARBON MATERIALS FOR RESPIRATORY PURPOSE. CHEMISORPTION OF SULFUR DIOXIDE

    by Ruslan Khoma, Sergey Vodzinskii, Danyil Klimov

    The review is devoted to the use of impregnated activated carbon materials as chemisorbents of sulfur (IV) oxide. General methods for obtaining ordinary activated carbon, preparation of raw materials, their chemical activation with alkalis and acids followed by heat treatment (carbonization) in an inert environment or in the presence of a gaseous oxidizer, the role of acid-base and redox catalysts in this process are considered. The influence of the chemical composition of the activated carbon surface, the presence of functional groups, and their acid-base properties, as well as the products of surface reactions on the peculiarities of sulfur (IV) oxide adsorption is analyzed from the point of view of SO2 removal efficiency and the possibility of SO2 regeneration. An important role in these processes is played by the pore size, the possibility of co-adsorption of water, and the presence of an oxidant. The nature of adsorbent-adsorbate interactions on the surface of activated carbon, their ener­gy, in particular, the contribution of so-called "physical" adsorption, van der Waals forces, hydrogen bonding, and the influence of surface functional groups are discussed. The activation of carbon raw materials with nitrogen-containing compounds leads to the N-doping of the surface, which increases the efficiency of SO2 adsorption, facilitating not only van der Waals and electrostatic interactions, but also S←N binding. The influence of oxygen and oxygen-containing functional groups on SO2 adsorption is also discussed. To obtain impregnated activated carbon for SO2 absorption, the original activated carbon of the required quality is impregnated with solutions of inorganic and organic compounds that remain on the inner surface of the activated carbon after drying. Impregnation blocks partly the porosity of activated carbon, but makes it more capable of chemical adsorption. Chemisorption, in which certain chemical bonds are formed between the surface of the activated carbon and the compound being adsorbed, is more selective than physical adsorption, where the size of molecules is critical for an effective capture process. It can be noted that unlike inorganic alkalis, which spoil the porous structure of activated carbon, treatment with a solution of ammonia or organic N-containing bases promotes SO2 absorption. A special place in gas purification is occupied by activated carbon impregnated with ionic liquids, non-aqueous solvents being used for impregnation. A separate issue of the chemisorption of sulfur (IV) oxide by samples of impregnated activated carbon based on d-metals will be discussed in detail below.


  • Open Access

    COMPOSITION AND THE RELATIVE STABILITY OF SULFUR DIOXIDE INTERACTION PRODUCTS WITH POTASSIUM AND MONOETHANOLAMMONIUM TAURATES AQUEOUS SOLUTIONS. PROLONGED-ACTION CHEMOSORBENT

    by R. E. Khoma, T. S. Bienkovska, В. О. Гельмбольдт, D. G. Klimov, M. G. Horlichenko, Р. Є. Хома

    Much research attention has been paid to amino acids as an alternative to amino alcohols for capture of sulfur dioxide. Taurine (Tau) occupies a special place among amino acids. This study was stimulated by the limited literature data on the nature of the interaction of SO2 with Tau salts aqueous solutions, the composition and relative stability of the corresponding reaction products. Chrono-pH-, chrono-redox- and chrono-conductometric studies of SO2 chemisorption with potassium taurate (TauK) and monoethanolammonium (TauMEA) aqueous 0.1 M solutions were carried out in the temperature range 293–313 K to study these processes. The maxima on the differential pH-metric titration curves positions coincide with the positions of the jumps on the integral and maxima on the redox-metric titration differential curves, as well as with breaks on the conductometric curves position. Δk negative values indicate the formation of weakly dissociated particles or less mobile ions in the solutions under study that is confirmed by the data of mathematical calculations. Using a mathematical model that takes into account the law of mass action, material balance and electrical neutrality principle, SO2 – TauK – H2O solutions ion-molecular composition and ionic strength were calculated. With an increase in the chemisotption SO2 amount, the taurate anions concentration decreases due to the hydrolytic transformation into zwitter ions +NH3CH2CH2SO2O - and the sequential transformation of hydrotaurate-sulfite (4:1 and 2:1; I and II), taurate-sulfite (2:1; III), hydrotaurate-hydrosulfite (2:1; IV) and taurate-hydrosulfite (1:1; V) associates. The concentration and thermodynamic constants for the formation ionic associates I–V were calculated. TauK input into impregnated fibrous chemisorbents (IFCS) composition obtained by impregnating viscose fibers with monoethanolamine aqueous 0.25 M solutions (IFCS-0.25MEA) leads to a synergistic increase in quantity of adsorbed SO2. IFCS-0.25MEA-TauK are long-acting sulfur dioxide chemisorbents, and TauK itself serves as a promoter-modifier towards IFCS-0.25MEA preventing the MEA removal from IFCS surface by the GPS flow due to the ionic associates formation and promoting deeper HOCH2CH2NH2 «response». Здійснено рН-, редокс та кондуктометричне дослідження хемосорбції оксиду сірки (IV) водними 0,1 моль/л розчинами таурату калію (TauK) і моноетаноламонію (TauMEA) в області температур 293 ÷ 313 К. Виявлено склад утворених при цьому сполук. Розраховано йон-молекулярний склад системи SO2 – TauK – H2O, концентраційні та термодинамічні константи утворення сульфітних та гідросульфітних асоціатів. Запропоновано склади просочуючих розчинів на основі MEA та TauK для отримання хемосорбентів пролонгованої дії респіраторного призначення.


  • Open Access

    INDIVIDUAL RESPIRATORY PROTECTION EQUIPMENT: INNOVATIONS TO REDUCE THE RISK OF OCCUPATIONAL DISEASES

    by S. Cheberyachko, Yu. Cheberyachko, D. Radchuk, O. Deryugin, D. Klimov, O. Sharovatova, V. Gridiaiev

    Individual respiratory protective equipment (PPE) is the last barrier to protect workers when performing production tasks in harmful and dangerous working conditions. The article analyzes modern innovative designs of personal respiratory protective equipment, which increase the level of protection of users during their operation. The method of morphological analysis is applied. This method based on the selection of possible solutions for assessing the manufacturability of PPE models (if there is a system of criteria) and making a rational decision regarding the features of their application in production conditions. As a result, it was established that in order to ensure the appropriate duration of the protective action of gas and dust filters and to avoid both poisoning of workers due to the ingress of harmful aerosols into the sub-mask space of the filter respirator, and excessive physical exhaustion due to the increase in pressure drop above the standard substances, it is recommended to equip the filters with special indicators for determining air pollution and pressure drop values. It was determined that in order to increase the reliability of the protection of workers, it is necessary to equip filter respirators with the functions of operational control of breathing resistance, place a headrest to control the occurrence of possible gaps behind the obturation band when performing various production operations, and establish the real term of the protective effect of the filters. The practical value of the work is innovative solutions to improve the designs of existing filter respirators, which will allow control over technological parameters during operation. In particular, the density along the obturation strip and the magnitude of the tension force of the respirator headgear. Recommendations are also given for controlling the term of the protective action of gas filters, since determining the specified indicators based on the organoleptic abilities of the user is dangerous for health. Keywords: risk, means of individual protection of respiratory organs, filtering respirator.


  • Open Access

    Study of protective efficiency of respirator with forced air supply

    by Nataliiа Borodina, Serhii Cheberiachko, Yurii Cheberyachko, Оleg Deryugin, Dmytro Radchuk, Daniil Klimov

    The aim of the work was to conduct experimental studies aimed at determining the protection factor of the filter respirator with forced air supply by volunteers in different modes of operation and to establish the dependence of the amount of air supplied by the fan from the air purification device to the filter’s resistance. Simulation studies to determine the protective effectiveness of the filter respirator on the testers were performed according to the procedure for determining the penetration coefficient of test aerosol – sodium chloride, as the ratio of the submask concentration of test aerosol to the ambient concentration formed in a special chamber that meets the requirements of DSTU EN 13274. Determination of the amount of air supplied by the air purification unit to the submask space and assessment of the value of positive pressure inside the mask was performed according to the procedure described in DSTU EN 12941: 2004. As a result of simulated laboratory tests to determine the protective effectiveness of filter respirators with forced air supply to the testers, it was found that the average result of the protection factor of the test samples ranged from 99.93 to 99.97, which meets the requirements of DSTU EN 12941: 2004. In addition, it was found that the amount of air treated by the fan of the air purification device for clean filters is 165 and 215 dm3/min for operating modes “Normal” and “Turbo”, while for the polluted filters it is reduced to 131 and 185 dm3/min, respectively. During the study, the compliance of the value of excess pressure in the submask space with the requirements of DSTU EN 12941: 2004, which should not exceed 2.5 mbar, was confirmed. It is also determined that the stability of the technical parameters of the air purification device is maintained in the specified range when charging the “Dinogy Li-Pol 11000mAh 14.8V 4S 25C” brand battery not less than 12 V to ensure the current value of not less than 1.6 A. The practical value of the results lies in determining the duration of protective action of the filter respirator, the choice of filter resistance to establish the scope and modes of operation in the developed personal respiratory protection equipment.


  • Open Access

    Filtering respirator with forced air supply

    by S.I. Cheberyachko, Yu.I. Cheberyachko, O.B. Deryugin, D.V. Slavinskyi, D.G. Klimov

    The filter respirator with forced air supply is an effective means of individual protection of respiratory organs (MIPRO) of users under especially dangerous conditions with air saturated with harmful substances while it is impossible to use other types of protective equipment. To solve this problem, methods of rational solution of inventive problems have been used. In particular, the approach of the finished object has been used (the object does not change), in which one feature is amplified; and the choice of one object from several objects has been applied, i.e. one search concept from several has been worked out. The design of a filter respirator with forced air supply has been developed, which differs from the known analogues by the presence of a unit for controlling the volume and the quality of purified air inhaled, with regard to the frequency and depth of the user breathing at exercise. It has been established that the volume of air flow that enters the submask spaceand gets into the user's respiratory organs is linearly dependent on the speed of the fan impeller, but when the resistance to air flow through the filters is more than 7-7,5 mBar, the dependence becomes nonlinear; it changing with the nature of physical activity. The practical value involves the development of an effective design of a filter respirator with forced air supply, the algorithm for its operation, that makes it possible to control the volume and the quality of purified air inhaled and takes into account the frequency and depth of the user breathing at exercise; the proposed algorithm also makes it possible to control the protective properties of the filter elements of the device at work