Yuqiao Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuqiao Liu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Kapil R. Dandekar
Drexel University
3 shared publications - Abu Saleh Tajin
Electrical and Computer Engineering, Drexel University, Philadelphia, PA, USA
2 shared publications - Ibrahim Tekin
Electronics Engineering, Sabanci University, Istanbul, Turkey
2 shared publications Kapil R. Dandekar
Electrical and Computer Engineering Department Drexel University 3141 Chestnut Street Philadelphia PA 19104 USA
2 shared publications- Vasil Pano
Electrical and Computer Engineering Department, Drexel University, Philadelphia, PA 19104 USA
2 shared publications - Ariana Levitt
A. J. Drexel Nanomaterials Institute Department of Materials Science and Engineering Drexel University Philadelphia PA 19104 USA
1 shared publication
Latest Publications
- 16 July 2021
- Published by Drexel University Libraries
Novel Antenna Technology for Internet of Things Applications
A growing number of physical objects are being connected to the Internet at an unprecedented rate to realize the idea of the Internet of Things (IoT). Meanwhile, 5G (the fifth generation of cellular network technology) is considered an important enabler for the IoT, for the reason that 5G promises vast improvements over the current capabilities of 4G systems. Not only will it allow extremely fast data speeds and channel capacity with lower energy consumption, 5G will also enable latencies on the order of a millisecond. 5G features meet the needs of IoT scenarios which are mainly characterized by small data packets, a massive number of connections to devices with limited power sources, and delay tolerant communication. There are lots of application scenarios of IoT such as: self-driving cars, healthcare, logistics, smart homes & cities, and retail. All of these application systems require novel antennas as the intermediary between electromagnetic waves and binary data. Recongurable antennas, phased array antennas and wearable antennas are emerging technologies to address these IoT issues. Some of these new antenna technologies can be realized with newly developed fabrication technologies and materials. In this thesis, two novel types of antenna systems are introduced, and the radio frequency (RF) performance of a new two dimensional (2D) material MXene will be characterized. We will discuss how these new antenna technologies can potentially be leveraged for 5G IoT systems.
- 16 July 2021
- Published by Drexel University Libraries
Novel Antenna Technology for Internet of Things Applications
A growing number of physical objects are being connected to the Internet at an unprecedented rate to realize the idea of the Internet of Things (IoT). Meanwhile, 5G (the fifth generation of cellular network technology) is considered an important enabler for the IoT, for the reason that 5G promises vast improvements over the current capabilities of 4G systems. Not only will it allow extremely fast data speeds and channel capacity with lower energy consumption, 5G will also enable latencies on the order of a millisecond. 5G features meet the needs of IoT scenarios which are mainly characterized by small data packets, a massive number of connections to devices with limited power sources, and delay tolerant communication. There are lots of application scenarios of IoT such as: self-driving cars, healthcare, logistics, smart homes & cities, and retail. All of these application systems require novel antennas as the intermediary between electromagnetic waves and binary data. Recongurable antennas, phased array antennas and wearable antennas are emerging technologies to address these IoT issues. Some of these new antenna technologies can be realized with newly developed fabrication technologies and materials. In this thesis, two novel types of antenna systems are introduced, and the radio frequency (RF) performance of a new two dimensional (2D) material MXene will be characterized. We will discuss how these new antenna technologies can potentially be leveraged for 5G IoT systems.
- 17 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 10 (1) , 100-113
TSV Antennas for Multi-Band Wireless Communication
On-chip wireless links offer improved network performance due to long distance communication, additional bandwidth, and broadcasting capabilities of antennas. This work challenges the on-chip antenna design conventions, and pushes toward a Through-Silicon Via-based antenna design called TSV_A that establishes multi-band wireless communication through the silicon substrate medium with only a 3 dB loss over a 30mm on-chip distance. The TSV_A performance is evaluated in both Finite Element Method and system-level Network-on-Chip (NoC) simulations. A comparison to traditional wire-based NoCs, analysis of wireless multi-bands, and technology scaling to demonstrate the substantial area improvements compared to traditional wireless NoCs (up to 99.88%) are performed. Simulation results show an improvement in network latency up to ~13% (average improvement of ~7%), energy-delay improvements of ~34% on average, and an improvement in throughput up to ~34% (average improvement of ~23%), using Wireless NoC with multi-band TSV_As. The improved signal performance of TSV_A, and multi-band capabilities, are ideal for wireless intercell communication for programmable metasurfaces with dedicated communication layers.
- 17 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 10 (1) , 100-113
TSV Antennas for Multi-Band Wireless Communication
On-chip wireless links offer improved network performance due to long distance communication, additional bandwidth, and broadcasting capabilities of antennas. This work challenges the on-chip antenna design conventions, and pushes toward a Through-Silicon Via-based antenna design called TSV_A that establishes multi-band wireless communication through the silicon substrate medium with only a 3 dB loss over a 30mm on-chip distance. The TSV_A performance is evaluated in both Finite Element Method and system-level Network-on-Chip (NoC) simulations. A comparison to traditional wire-based NoCs, analysis of wireless multi-bands, and technology scaling to demonstrate the substantial area improvements compared to traditional wireless NoCs (up to 99.88%) are performed. Simulation results show an improvement in network latency up to ~13% (average improvement of ~7%), energy-delay improvements of ~34% on average, and an improvement in throughput up to ~34% (average improvement of ~23%), using Wireless NoC with multi-band TSV_As. The improved signal performance of TSV_A, and multi-band capabilities, are ideal for wireless intercell communication for programmable metasurfaces with dedicated communication layers.
- Open Access
- 4 February 2020
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (4) , 302-307
TSV‐based antenna for on‐chip wireless communication
On‐chip wireless interconnects provide signal broadcasting and link shortcuts for improved latency and throughput, useful considering the increase of the number of processing elements on a chip. In this work, a through‐silicon via antenna ( TSV_A ) for on‐chip wireless communication is proposed. TSV_A significantly improves the wireless interconnect performance over current solutions of on‐chip antennas, which occupy a large area of the chip and are not capable of far‐reaching transmission. Printed circuit board (PCB) prototypes are designed and fabricated to validate the proposed TSV_A . The PCB prototype of the TSV_A has an insertion loss of 5–10 dB at a distance of ≃20 mm, measured in PCB and validated with high fidelity 3D finite element method simulation results. TSV_A has improved path loss, smaller size, and lower manufacturing costs due to the well‐established TSV fabrication process for 3D‐ICs. Projections for an on‐chip 3D‐IC operation indicate up to 40 dB improved signal strength compared to other on‐chip antennas, with an insertion loss of ≃3–5 dB up to a 30 mm distance.
- 4 February 2020
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (4) , 302-307
Open AccessTSV‐based antenna for on‐chip wireless communication
On‐chip wireless interconnects provide signal broadcasting and link shortcuts for improved latency and throughput, useful considering the increase of the number of processing elements on a chip. In this work, a through‐silicon via antenna ( TSV_A ) for on‐chip wireless communication is proposed. TSV_A significantly improves the wireless interconnect performance over current solutions of on‐chip antennas, which occupy a large area of the chip and are not capable of far‐reaching transmission. Printed circuit board (PCB) prototypes are designed and fabricated to validate the proposed TSV_A . The PCB prototype of the TSV_A has an insertion loss of 5–10 dB at a distance of ≃20 mm, measured in PCB and validated with high fidelity 3D finite element method simulation results. TSV_A has improved path loss, smaller size, and lower manufacturing costs due to the well‐established TSV fabrication process for 3D‐ICs. Projections for an on‐chip 3D‐IC operation indicate up to 40 dB improved signal strength compared to other on‐chip antennas, with an insertion loss of ≃3–5 dB up to a 30 mm distance.
- 3 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (4) , 542-546
On the Effect of Sweat on Sheet Resistance of Knitted Conductive Yarns in Wearable Antenna Design
Researchers are looking for new methods to integrate sensing capabilities into textiles while maintaining the durability, flexibility, and comfort of the garment. One method for imparting sensing capabilities into garments is through coupling conductive yarns with the radio frequency identification (RFID) technology. These smart devices have exhibited promising results for short-term use. However, long-term studies of their performance are still needed to evaluate their performance over a longer period. Like all garments, wearable sensors are susceptible to environmental factors during use. These factors can lead to dielectric coupling and corrosion of conductive yarns, which has the potential to degrade the performance of the device. This letter analyzes the effect of sweat and moisture on silver-coated nylon yarn by extracting the sheet resistance at 913 MHz from transmission line measurements. HFSS simulation shows the level of perturbation in antenna performance as sheet resistance increased with each cycle of sweat-immersion, washing, and drying.
- 3 February 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (4) , 542-546
On the Effect of Sweat on Sheet Resistance of Knitted Conductive Yarns in Wearable Antenna Design
Researchers are looking for new methods to integrate sensing capabilities into textiles while maintaining the durability, flexibility, and comfort of the garment. One method for imparting sensing capabilities into garments is through coupling conductive yarns with the radio frequency identification (RFID) technology. These smart devices have exhibited promising results for short-term use. However, long-term studies of their performance are still needed to evaluate their performance over a longer period. Like all garments, wearable sensors are susceptible to environmental factors during use. These factors can lead to dielectric coupling and corrosion of conductive yarns, which has the potential to degrade the performance of the device. This letter analyzes the effect of sweat and moisture on silver-coated nylon yarn by extracting the sheet resistance at 913 MHz from transmission line measurements. HFSS simulation shows the level of perturbation in antenna performance as sheet resistance increased with each cycle of sweat-immersion, washing, and drying.
- Open Access
- 11 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (3) , 154-158
Efficiency measurement of the flexible on‐body antenna at varying levels of stretch in a reverberation chamber
Flexible antennas have the potential to transform wearable and fabric‐based wireless sensing technologies. The antenna discussed in this study is part of a sensing system that uses the back‐scattered power level as the decision metric. For a good wireless sensor, it is necessary to offer a feasible read range and maintain good distinctions in the back‐scattered power levels between the different states (i.e. level of stretch) of the antenna. Moreover, effects due to human body proximity should be minimised. For these reasons, the radiation efficiency is a crucial parameter to investigate. This study presents the radiation efficiency measurement of the proposed flexible knitted ‘Bellyband’ antenna at two different levels of stretch in a reverberation chamber. This work validates the reverberation chamber measurements through comparison with simulations and anechoic chamber measurements at 900 MHz. Moreover, this work demonstrates how the approach can be used to quantify bellyband antenna efficiency in the vicinity of a human body. Finally, the efficiency results were used to predict the read range of Bellyband radio frequency identification technology.
- 11 December 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (3) , 154-158
Open AccessEfficiency measurement of the flexible on‐body antenna at varying levels of stretch in a reverberation chamber
Flexible antennas have the potential to transform wearable and fabric‐based wireless sensing technologies. The antenna discussed in this study is part of a sensing system that uses the back‐scattered power level as the decision metric. For a good wireless sensor, it is necessary to offer a feasible read range and maintain good distinctions in the back‐scattered power levels between the different states (i.e. level of stretch) of the antenna. Moreover, effects due to human body proximity should be minimised. For these reasons, the radiation efficiency is a crucial parameter to investigate. This study presents the radiation efficiency measurement of the proposed flexible knitted ‘Bellyband’ antenna at two different levels of stretch in a reverberation chamber. This work validates the reverberation chamber measurements through comparison with simulations and anechoic chamber measurements at 900 MHz. Moreover, this work demonstrates how the approach can be used to quantify bellyband antenna efficiency in the vicinity of a human body. Finally, the efficiency results were used to predict the read range of Bellyband radio frequency identification technology.