Ivana Aguiar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivana Aguiar has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- María Eugenia Pérez Barthaburu
Departamento de Desarrollo Tecnológico, Centro Universitario Regional del Este, Universidad de la República, Rocha, Uruguay
8 shared publications Laura Fornaro
Departamento de Desarrollo Tecnológico, Centro Universitario Regional del Este, Universidad de la República, Rocha, Uruguay
4 shared publications- Isabel Galain
Área Radioquímica, Facultad de Química, Universidad de la Republica, Montevideo, Uruguay
3 shared publications - L. Fornaro
Compound Semiconductors Group, CURE, Universidad de la República, Rocha, Uruguay
3 shared publications - Laura Fornaro
Univ Republ, CURE, Dept Desarrollo Tecnol, Grp Desarrollo Mat & Estudios Ambientales, Ruta 9 & Ruta 15, Rocha 27000, Uruguay
3 shared publications - Loengrid Bethencourt
Departamento de Desarrollo Tecnológico, Centro Universitario Regional del Este, Universidad de la República, Rocha, Uruguay
3 shared publications
Latest Publications
- Open Access
- 3 November 2025
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (1) , 141-152
PEG surface functionalization of Bi2S3 nanorods: Structural characterization, cytocompatibility, and radiosensitizing potential
Bismuth sulfide nanorods are promising for biomedical use due to their high atomic number and biocompatibility. This paper presents their surface modification through ligand exchange with polyethylene glycol (PEG) of various molecular weights to enhance dispersibility and biocompatibility in physiological media. PEGylation was confirmed, ensuring structural integrity. The optimized formulation maintained morphology, with a hydrodynamic size of 134 nm and a zeta potential of –11.3 mV. Stability and interaction in DMEM with fetal bovine serum and artificial plasma were evaluated, showing a reversible protein corona with low association constants. Cytotoxicity assays showed minimal toxicity across concentrations. The radiosensitizing effect of PEGylated nanorods was tested under three X-ray doses, revealing a dose-dependent increase in cancer cell death, with dose enhancement factors of 1.3 and 1.6 for MCF7 and A549 cells respectively, at a survival factor of 37. These findings support PEGylated Bi 2 S 3 nanorods as stable, biocompatible platforms for enhancing radiotherapy efficacy. Graphical
- 3 November 2025
- Published by Springer Nature in Journal of Materials Research
- Vol. 41 (1) , 141-152
Open AccessPEG surface functionalization of Bi2S3 nanorods: Structural characterization, cytocompatibility, and radiosensitizing potential
Bismuth sulfide nanorods are promising for biomedical use due to their high atomic number and biocompatibility. This paper presents their surface modification through ligand exchange with polyethylene glycol (PEG) of various molecular weights to enhance dispersibility and biocompatibility in physiological media. PEGylation was confirmed, ensuring structural integrity. The optimized formulation maintained morphology, with a hydrodynamic size of 134 nm and a zeta potential of –11.3 mV. Stability and interaction in DMEM with fetal bovine serum and artificial plasma were evaluated, showing a reversible protein corona with low association constants. Cytotoxicity assays showed minimal toxicity across concentrations. The radiosensitizing effect of PEGylated nanorods was tested under three X-ray doses, revealing a dose-dependent increase in cancer cell death, with dose enhancement factors of 1.3 and 1.6 for MCF7 and A549 cells respectively, at a survival factor of 37. These findings support PEGylated Bi 2 S 3 nanorods as stable, biocompatible platforms for enhancing radiotherapy efficacy. Graphical
- Open Access
- 29 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (41) , 16843-16853
Green solution synthesis of Bi19S27I3 nanostructures – engineering their morphology through polyethylene glycol and their use in the photocatalytic reduction of Cr(vi)
This study utilizes a green synthesis approach for Bi19S27I3 nanostructures, controlling their morphology by using PEG and adjusting the reaction time, which were used in the photocatalytic reduction of Cr(vi). Created in BioRender.com/i89s606.
- 29 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (41) , 16843-16853
Open AccessGreen solution synthesis of Bi19S27I3 nanostructures – engineering their morphology through polyethylene glycol and their use in the photocatalytic reduction of Cr(vi)
This study utilizes a green synthesis approach for Bi19S27I3 nanostructures, controlling their morphology by using PEG and adjusting the reaction time, which were used in the photocatalytic reduction of Cr(vi). Created in BioRender.com/i89s606.
- Open Access
- 5 April 2024
- Published by Springer Nature in MRS Advances
- Vol. 9 (2) , 25
Second Materials Science Researchers Meeting: Insights from conference articles and future directions
- 5 April 2024
- Published by Springer Nature in MRS Advances
- Vol. 9 (2) , 25
Open AccessSecond Materials Science Researchers Meeting: Insights from conference articles and future directions
- 5 October 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (37) , 17592-17608
From a novel synthesis method for bismuth tri-iodide nanoparticles to a solution-processed hybrid material: BiI3-conducting polymer
- 5 October 2022
- Published by Springer Nature in Journal of Materials Science
- Vol. 57 (37) , 17592-17608
From a novel synthesis method for bismuth tri-iodide nanoparticles to a solution-processed hybrid material: BiI3-conducting polymer
- 7 June 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (24) , 9231-9241
Understanding the Crystal Growth of Bismuth Chalcohalide Nanorods through a Self-Sacrificing Template Process: A Comprehensive Study
Bismuth-based semiconductors are promising candidates for applications in photocatalysis, photodetection, solar cells, etc. BiSI in particular is attracting attention. It has anisotropic optoelectronic properties and comprises relatively abundant elements. However, the synthesis of this ternary compound presents several challenges. Here, we delve into the underlying chemical processes that lead to the crystal growth of BiSI nanorods and optimize a solution-based synthesis. The mechanism of formation of BiSI nanocrystals is the self-sacrifice of Bi2S3 nanostructures, which also act as templates. The crystallographic similarities between the chalcogenide and the chalcohalide allow for the solid state transformation from one to the other. However, there is also a synergy with the I3- species formed in the reaction media needed to obtain BiSI. Our method makes use of a green solvent, avoids complicated media, and drastically reduces the reaction time compared to other methods. The obtained nanorods present a band gap of 1.6 eV, in accordance with the reported values. This work presents insight into the chemistry of bismuth-based semiconductors, while introducing an easy, green, and scalable synthesis of a promising material, which could also be applied to similar compounds and other chalcoiodides, such as SbSI. In addition, the optical properties of the BiSI nanorods show their potential in photovoltaic applications.
- 7 June 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (24) , 9231-9241
Understanding the Crystal Growth of Bismuth Chalcohalide Nanorods through a Self-Sacrificing Template Process: A Comprehensive Study
Bismuth-based semiconductors are promising candidates for applications in photocatalysis, photodetection, solar cells, etc. BiSI in particular is attracting attention. It has anisotropic optoelectronic properties and comprises relatively abundant elements. However, the synthesis of this ternary compound presents several challenges. Here, we delve into the underlying chemical processes that lead to the crystal growth of BiSI nanorods and optimize a solution-based synthesis. The mechanism of formation of BiSI nanocrystals is the self-sacrifice of Bi2S3 nanostructures, which also act as templates. The crystallographic similarities between the chalcogenide and the chalcohalide allow for the solid state transformation from one to the other. However, there is also a synergy with the I3- species formed in the reaction media needed to obtain BiSI. Our method makes use of a green solvent, avoids complicated media, and drastically reduces the reaction time compared to other methods. The obtained nanorods present a band gap of 1.6 eV, in accordance with the reported values. This work presents insight into the chemistry of bismuth-based semiconductors, while introducing an easy, green, and scalable synthesis of a promising material, which could also be applied to similar compounds and other chalcoiodides, such as SbSI. In addition, the optical properties of the BiSI nanorods show their potential in photovoltaic applications.
- 13 March 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (22) , 225710
Bismuth chalcohalide-based nanocomposite for application in ionising radiation detectors
Bismuth sulpho iodide (BiSI) belongs to the family of chalcohalides, which present several attractive electro-optic properties. In particular, BiSI is a semiconductor which could be used in X and gamma ray detection due to a band gap of 1.6 eV, density of 6.4 g cm −3 , and absorption coefficient for 60 keV radiation of 5.6 cm 2 g −1 . This work presents a facile synthesis under solvothermal conditions of a nanocomposite consisting of BiSI nanorods and amorphous carbon structures. Furthermore, it studies its ionising radiation detection properties at room temperature, when prototype detectors were built from pellets. The construction conditions of pellets were also studied, varying the applied pressure and heat treatment to the nanocomposite. Dark current density and response to different exposure rates of a 241 Am source were measured for the prototype detectors built. It was found that heat treatment of pellets considerably improves detectors performance. Dark current density was one order of magnitude lower than for the pellets without heat treatment, and its response to the 241 Am source, linear, with a signal to noise ratio of 7 for 20 V. Finally, the resistivity for the heat treated detector was in the order of 10 11 Ω cm, comparable to other materials studied for this application.
- 13 March 2020
- Published by IOP Publishing in Nanotechnology
- Vol. 31 (22) , 225710
Bismuth chalcohalide-based nanocomposite for application in ionising radiation detectors
Bismuth sulpho iodide (BiSI) belongs to the family of chalcohalides, which present several attractive electro-optic properties. In particular, BiSI is a semiconductor which could be used in X and gamma ray detection due to a band gap of 1.6 eV, density of 6.4 g cm −3 , and absorption coefficient for 60 keV radiation of 5.6 cm 2 g −1 . This work presents a facile synthesis under solvothermal conditions of a nanocomposite consisting of BiSI nanorods and amorphous carbon structures. Furthermore, it studies its ionising radiation detection properties at room temperature, when prototype detectors were built from pellets. The construction conditions of pellets were also studied, varying the applied pressure and heat treatment to the nanocomposite. Dark current density and response to different exposure rates of a 241 Am source were measured for the prototype detectors built. It was found that heat treatment of pellets considerably improves detectors performance. Dark current density was one order of magnitude lower than for the pellets without heat treatment, and its response to the 241 Am source, linear, with a signal to noise ratio of 7 for 20 V. Finally, the resistivity for the heat treated detector was in the order of 10 11 Ω cm, comparable to other materials studied for this application.
- Open Access
- 18 September 2018
- Published by Springer Nature in MRS Advances
- Vol. 3 (61) , 3535-3541
A brief overview of Materials Science in Uruguay
- 18 September 2018
- Published by Springer Nature in MRS Advances
- Vol. 3 (61) , 3535-3541
Open AccessA brief overview of Materials Science in Uruguay
- 1 April 2017
- Published by Elsevier in Nano-Structures & Nano-Objects
- Vol. 10, 15-21
Hybrid-HgS nanoparticles and P3HT layers for solar cells applications- 1 April 2017
- Published by Elsevier in Nano-Structures & Nano-Objects
- Vol. 10, 15-21
Hybrid-HgS nanoparticles and P3HT layers for solar cells applications- 1 January 2017
- Published by Elsevier in Journal of Crystal Growth
- Vol. 457, 234-238
Synthesis and characterization of HgI2 nanoparticles for films nucleation
- 1 January 2017
- Published by Elsevier in Journal of Crystal Growth
- Vol. 457, 234-238
Synthesis and characterization of HgI2 nanoparticles for films nucleation