Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenjie Zhang has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Capacity Optimization of Renewable-Based Hydrogen Production–Refueling Station for Fuel Cell Electric Vehicles: A Real-Project-Based Case Study

    by Yongzhe Zhang, Wenjie Zhang, Yingdong He, Hanwen Zhang, Wenjian Chen, Chengzhi Yang, Hao Dong

    With the deepening electrification of transportation, hydrogen fuel cell electric vehicles (FCEVs) are emerging as a vital component of clean and electrified transportation systems. Nonetheless, renewable-based hydrogen production–refueling stations (HPRSs) for FCEVs still need solid models for accurate simulations and a practical capacity optimization method for cost reduction. To address this gap, this study leverages real operation data from China’s largest HPRS to establish and validate a comprehensive model integrating hydrogen production, storage, renewables, FCEVs, and the power grid. Building on this validated model, a novel capacity optimization framework is proposed, incorporating an improved Jellyfish Search Algorithm (JSA) to minimize the initial investment cost, operating cost, and levelized cost of hydrogen (LCOH). The results demonstrate the framework’s significant innovations and effectiveness: It achieves the maximum reductions of 29.31% in the initial investment, 100% in the annual operational cost, and 44.19% in LCOH while meeting FCEV demand. Simultaneously, it reduces peak grid load by up to 43.80% and enables renewable energy to cover up to 89.30% of transportation hydrogen demand. This study contributes to enhancing economic performance and optimizing the design and planning of HPRS for FCEVs, as well as promoting sustainable transportation electrification.


  • Open Access

    A review of prediction models of total carbon emission for civil buildings in China

    by Wenlong Yin, Wenjie Zhang, Tongdan Gong, Xiaoming Li, Kangyong Liu

    The carbon emissions from the building sector are one of the major sources of carbon emissions globally. In order to address global climate change, the Chinese government has proposed the 3,060 dual carbon goals. In this context, the government urgently needs a predictive model for calculating and forecasting the energy consumption and carbon emissions in the construction industry to help formulate decarbonization strategies. The review and analysis of a predictive model for the current total carbon dioxide emissions in the Chinese construction sector can provide a basis for calculating and predicting carbon emissions, as well as for formulating corresponding emission reduction policies. This article analyzes the Carbon emission factor and the methods of obtaining building energy consumption data, which are crucial for predicting carbon emissions. Furthermore, it examines the predictive models for total CO2 emissions in the Chinese construction sector and summarizes their respective advantages and limitations. Finally, it highlights the shortcomings of existing research in terms of carbon emission factors, energy consumption data, and accounting scope, while suggesting future research directions.


  • Open Access

    Experimental Study of Phase Change Microcapsule Suspensions Applied in BIPV Construction

    by Yu Zheng, Xiaoming Li, Wenjie Zhang, Kuan Wang, Feng Han, Xiaoge Li, Yuqiang Zhao

    In this paper, a phase change microcapsule suspension MPCMS25 with a mass fraction of 10% was prepared with TH-ME25 as the phase change microcapsule particles and deionized water as the base fluid. The experimental benches of the Building Integrated Photovoltaic (BIPV) system and BIPV-MPCMS system were set up, and the comparative tests were carried out in Nanjing to study the optimization effect of phase change microcapsule suspension on the thermal and electrical properties of the BIPV system. The results show that MPCMS25 reduces the component temperature of the system by 8.8 °C and the backplane temperature by 11.1 °C. The optimization time of the component operating temperature and the backplane temperature is 9.5 h and 9.75 h, respectively. Delay appearance of peak module operating temperature by 114 min and peak backplane temperature by 125 min. In addition, the suspension can also improve the power conversion efficiency (PCE) of photovoltaic modules by 0~5%. After a simulation study on the energy consumption of a high-speed railway station, it is found that using the BIPV-MPCMS system as the building envelope can achieve an energy saving rate of about 8.5%.


  • Open Access

    A Forecasting Method for Macro-Control Policy of Heating Energy Consumption and Carbon Emissions Based on Building Area and Energy Intensity: A Case Study of Northern China

    by Yu Zheng, Wenlong Yin, Wenjie Zhang, Jinhan Liang, Kangyong Liu, Kuan Wang

    In response to extreme climate change, China has set a goal of reaching emission peak by 2030 and achieving carbon neutrality by 2050. Energy conservation and emission reduction of building heating in northern China are key to achieving this goal. Based on building area prediction and energy consumption intensity, this paper establishes a model for calculating heating energy consumption and carbon emissions in northern residential buildings at the macro level, which provides a basis for formulating policies related to heating and emission reduction in northern buildings. Based on the research method of scenario projection, combining the carbon emission subsets and future heating energy mix projections in northern China, the heating energy consumption in northern China decreases to 175, 149 and 135 Mtce in 2050 under the baseline, medium control and strict control scenarios, respectively. The heating energy consumption in the northern region should be controlled at least under the medium control scheme. Under this scenario, building heating carbon emissions in the north could be reduced to 450 MtCO2 by 2050, or 280 MtCO2 if more stringent abatement technologies are adopted. In order to achieve this goal, a combination of energy-saving technologies must be used. The use of biomass and solar technologies should be emphasized in rural heating, while envelope renovation makes the greatest contribution to heating energy savings, with envelope renovation contributing up to 92 Mtce to urban heating.


  • Open Access

    Forecast and Analysis of the Total Amount of Civil Buildings in China in the Future Based on Population Driven

    by Tongdan Gong, Wenjie Zhang, Jinhan Liang, Changqing Lin, Kai Mao

    Controlling the scale of civil buildings is of great significance for energy saving and emission reduction in the construction field. This paper analyzes and extracts the key index parameters for the calculation of various civil building areas, establishes a detailed calculation model of the total civil building area, and constructs three different scenarios to predict various civil building areas in China from 2020 to 2060. Under the three scenarios, the total amount of civil buildings in China will reach a peak of 93.5, 84.6, and 76.3 billion m2 in 2040, 2035, and 2035, respectively. Under the constraints of energy consumption and carbon emission, this paper suggests that civil buildings develop according to the medium control scenario. In 2035, the urban per capita residential area will reach a peak of 42 m2, the urban residential area will reach 43 billion m2, the rural per capita residential area will reach the peak of 55 m2, the rural residential area will reach 20.6 billion m2, and the public building area will reach 21 billion m2. By 2060, the total area of civil buildings will drop to 76.5 billion m2, including 37.1 billion m2 of urban residential buildings, 18.5 billion m2 of rural residential buildings, and 20.9 billion m2 of public buildings.


  • Open Access

    Evaluation of Photovoltaic Energy Saving Potential and Investment Value of Urban Buildings in China Based on GIS Technology

    by Wenjie Zhang, Fengcheng Huang, Kai Mao, Changqing Lin, Zhen Pan

    The environmental and energy crisis has become a problem that can not be ignored in today’s world and improving the proportion of renewable energy utilization is an important way to alleviate the problem. China has begun to vigorously develop rooftop photovoltaic systems, and it is urgent to analyze the photovoltaic potential of the country. In this paper, GIS technology is used to calculate the available area of a PV system on the roof of urban buildings in China. The installed capacity and annual power generation of a PV system on the roof of urban buildings in China are further calculated, and the investment cost analysis of the buildings with a PV system is carried out. The results show that Chinese mainland city rooftop photovoltaic area has reached 3.35 billion m2. If urban roofs are used for photovoltaic power generation in China, the annual photovoltaic power generation capacity will be 672 billion kWh, which is about 61% of the total annual electricity consumption of the whole society in 2020. On the other hand, the initial investment in the construction of an urban photovoltaic system is large, but most of them can realize the return of investment in a short period of 8–10 years. Moreover, in the effective life of the follow-up photovoltaic system, it will bring greater economic benefits, which is more than two times the initial investment. To further promote the process of social carbon peak and carbon neutrality in China, the construction of an urban photovoltaic system is very feasible.


  • Open Access

    The Influence of Photovoltaic Cell Coverage Rate on the Thermal and Electric Performance of Semi-Transparent Crystalline Silicon Photovoltaic Windows Based on the Dynamic Power Coupling Model

    by Wenjie Zhang, Kangyong Liu, Shengbin Ma, Tongdan Gong, Yingbo Zhao

    Based on the energy conversion equation and dynamic power model of the semi-transparent crystalline silicon photovoltaic (PV) window (ST-PVW), through an iterative coupling solution to the operating temperature of the cell, a thermal-electric coupling calculation method for the ST-PVW is provided, and, combined with experiments, the method model was verified. Based on this model, the influence of PV cell coverage rate (PVR) on the thermal performance of the ST-PVW was studied. According to the simulation results, in summer, the heat gain of the ST-PVW decreases with the increase of PVR, and in winter, the amount of heat loss increases with the increase of PVR. For the four cities of Guangzhou, Nanjing, Beijing and Harbin, when the PVR is 1, 0.60 to 0.64, 0.28 to 0.32 and 0.26 to 0.30, respectively, the annual power consumption of the air conditioner can reach the minimum, and when the PVR is 0.16 to 0.17, 0.24 to 0.25, 0.22 to 0.23 and 0.19 to 0.20, respectively, the amount of electricity generated can just offset the power consumption of the air conditioner during the day.


  • Open Access

    Study of the Application Characteristics of Photovoltaic-Thermoelectric Radiant Windows

    by Wenjie Zhang, Jiajun Zhang, Fengcheng Huang, Yuqiang Zhao, Yongheng Zhong

    Through experiments and numerical simulation, this paper studies the related performance of a photovoltaic thermoelectric radiation cooling window structure, verifies the accuracy of the established solar thermoelectric radiation window calculation model, and analyzes the cooling performance of different parameters of thermoelectric sheet, radiation plate, and photovoltaic panel. On the basis of considering the relationship between the power generation and power consumption of the structure, the numerical calculation results show that the solar thermoelectric radiation window with non-transparent photovoltaic module (NTPV) has a total cooling capacity of 50.2 kWh, power consumption of 71.8 kWh, and power generation of 83.9 kWh from June to August. The solar thermoelectric radiation window with translucent photovoltaic module (STPV) has a total cooling capacity of 50.7 kWh, power consumption of 71.7 kWh, and power generation of 45.4 kWh from June to August. If the operation time of the thermoelectric module is limited, when the daily operation time of TEM is less than 8 h, the power generation of STPV can meet the power consumption demand of the thermoelectric radiation window from June to August.