Isabela Monteiro Cesar Oyama
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Isabela Monteiro Cesar Oyama has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Fabio Roberto Passador
Department of Science and Technology Federal University of São Paulo (UNIFESP) São José dos Campos São Paulo Brazil
2 shared publications - Eduardo Ferreira Martins
Department of Science and Technology, Polymer and Biopolymer Technology Laboratory (TecPBio) Federal University of São Paulo (UNIFESP) São José dos Campos Brazil
1 shared publication - Erick Gabriel Ribeiro dos Anjos
Universidade Federal de Sao Paulo, Brasil
1 shared publication Gabriel P. M. de Souza
Department of Science and Technology, Polymer and Biopolymer Technology Laboratory (TecPBio) Federal University of São Paulo (UNIFESP) Sao Paulo Brazil
1 shared publication- Guilherme Ferreira de Melo Morgado
Universidade Federal de Sao Paulo, Brasil
1 shared publication Larissa S. Montagna
Department of Science and Technology, Polymer and Biopolymer Technology Laboratory (TecPBio) Federal University of São Paulo (UNIFESP) Sao Paulo Brazil
1 shared publication
Latest Publications
- 26 July 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (40) , 1-17
Antistatic and antimicrobial packaging ofPLA/PHBVblend‐based graphene nanoplatelets nanocomposites
Graphene nanoplatelets (GNP) were used as a filler for the preparation of antistatic and antimicrobial packaging based on biodegradable blends of poly(acid lactic)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PLA/PHBV) for the electronic components industry. These packages must have low electrical resistivity and mechanical resistance. The use of biodegradable polymers helps to reduce waste and the addition of GNP can also contribute to antimicrobial activity. In this work, the effect of the addition of GNP on the thermal, mechanical, electrical, electromagnetic properties, and antimicrobial activity of the PLA/PHVB blend was evaluated. PLA/PHBV (80/20) blends with the addition of 1, 3, and 5 wt% of GNP were prepared by melt mixing using extrusion and injection‐mold processes. The samples were characterized by mechanical tests (tensile test, and Shore D hardness), thermal (differential scanning calorimetry and thermogravimetric analysis), impedance spectroscopy, electromagnetic interference shielding efficiency (EMI SE), antimicrobial activity, and field emission gun scanning electron microscopy. In general, the addition of GNP contributes to the increase in elastic modulus and Shore D hardness. The percolation threshold was obtained with the addition of 3 or 5 wt% of GNP in the PLA/PHBV blend with a reduction of 3 orders of magnitude in the electrical resistivity, which can be applied to antistatic packaging. All the nanocomposites exhibited antimicrobial activity, and the addition of 5 wt% GNP inhibited 86% of the growth ofEscherichia coli. The PLA/PHBV blend‐based GNP nanocomposite with the addition of 5 wt% of GNP presents the best balance of mechanical properties, with low electrical resistivity, greater total shielding effectiveness of EMI SE, and antimicrobial activity.
- 26 July 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (40) , 1-17
Antistatic and antimicrobial packaging ofPLA/PHBVblend‐based graphene nanoplatelets nanocomposites
Graphene nanoplatelets (GNP) were used as a filler for the preparation of antistatic and antimicrobial packaging based on biodegradable blends of poly(acid lactic)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PLA/PHBV) for the electronic components industry. These packages must have low electrical resistivity and mechanical resistance. The use of biodegradable polymers helps to reduce waste and the addition of GNP can also contribute to antimicrobial activity. In this work, the effect of the addition of GNP on the thermal, mechanical, electrical, electromagnetic properties, and antimicrobial activity of the PLA/PHVB blend was evaluated. PLA/PHBV (80/20) blends with the addition of 1, 3, and 5 wt% of GNP were prepared by melt mixing using extrusion and injection‐mold processes. The samples were characterized by mechanical tests (tensile test, and Shore D hardness), thermal (differential scanning calorimetry and thermogravimetric analysis), impedance spectroscopy, electromagnetic interference shielding efficiency (EMI SE), antimicrobial activity, and field emission gun scanning electron microscopy. In general, the addition of GNP contributes to the increase in elastic modulus and Shore D hardness. The percolation threshold was obtained with the addition of 3 or 5 wt% of GNP in the PLA/PHBV blend with a reduction of 3 orders of magnitude in the electrical resistivity, which can be applied to antistatic packaging. All the nanocomposites exhibited antimicrobial activity, and the addition of 5 wt% GNP inhibited 86% of the growth ofEscherichia coli. The PLA/PHBV blend‐based GNP nanocomposite with the addition of 5 wt% of GNP presents the best balance of mechanical properties, with low electrical resistivity, greater total shielding effectiveness of EMI SE, and antimicrobial activity.
- 27 March 2020
- Published by Wiley in Polymer Composites
- Vol. 41 (7) , 2744-2752
A new eco‐friendly green composite for antistatic packaging: Green low‐density polyethylene/glassy carbon
Antistatic packages are used to protect and storage sensitive electronic compounds, plates, and integrated circuit. To produce antistatic packages, polymers must have good mechanical properties and low electrical resistivity to prevent the accumulation of static electricity and damage the stored product. Many polymers can be used to produce packages, especially polyolefins. In the field of sustainable packaging, green low‐density polyethylene (green LDPE) has been highlighting in recent years due to its origin: sugar cane. Thus, it is a green polymer that has the same properties as LDPE obtained from petroleum. Due to its insulating character, it is necessary the addition of conductive fillers, thus in this work, glassy carbon (GC) was used as a conductive filler. GC is a carbon material made from furfuryl alcohol resin obtained from rice husk or sugar cane, it is a conductive material and can decrease the electrical resistivity of the green LDPE/GC composite, making it possible to use as an antistatic packaging. Eco‐friendly green composites based on green LDPE/GC with different contents of GC (0.1, 0.3, and 0.5 wt%) were prepared using a thermokinetic homogenizer. The green composites were characterized by mechanical and thermal properties, structural characteristics, water vapor permeability, optical properties, and impedance spectroscopy. The results indicate that the use of green LDPE/GC composites with low concentrations of GC (0.1 wt%) is feasible for the preparation of antistatic packaging since the green composites showed low electrical resistivity and improvement in elastic modulus.
- 27 March 2020
- Published by Wiley in Polymer Composites
- Vol. 41 (7) , 2744-2752
A new eco‐friendly green composite for antistatic packaging: Green low‐density polyethylene/glassy carbon
Antistatic packages are used to protect and storage sensitive electronic compounds, plates, and integrated circuit. To produce antistatic packages, polymers must have good mechanical properties and low electrical resistivity to prevent the accumulation of static electricity and damage the stored product. Many polymers can be used to produce packages, especially polyolefins. In the field of sustainable packaging, green low‐density polyethylene (green LDPE) has been highlighting in recent years due to its origin: sugar cane. Thus, it is a green polymer that has the same properties as LDPE obtained from petroleum. Due to its insulating character, it is necessary the addition of conductive fillers, thus in this work, glassy carbon (GC) was used as a conductive filler. GC is a carbon material made from furfuryl alcohol resin obtained from rice husk or sugar cane, it is a conductive material and can decrease the electrical resistivity of the green LDPE/GC composite, making it possible to use as an antistatic packaging. Eco‐friendly green composites based on green LDPE/GC with different contents of GC (0.1, 0.3, and 0.5 wt%) were prepared using a thermokinetic homogenizer. The green composites were characterized by mechanical and thermal properties, structural characteristics, water vapor permeability, optical properties, and impedance spectroscopy. The results indicate that the use of green LDPE/GC composites with low concentrations of GC (0.1 wt%) is feasible for the preparation of antistatic packaging since the green composites showed low electrical resistivity and improvement in elastic modulus.