SLShucong Li

Shucong Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Shucong Li has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Toward Mechanical Intelligence in Robotics

    by Xinyi Yang, Xinyi Ding, Tianyu Wang, Daniel I. Goldman, Shucong Li, Bolei Deng

    Conventional robotic systems concentrate sensing, control, and actuation in electronic hardware, creating constraints in harsh environments, energy efficiency, and miniaturization. The physical body of a robot is more than a passive executor of control commands; it is an active substrate that transforms inputs into functional operations through its intrinsic mechanical dynamics. This perspective describes this capability as mechanical intelligence and identifies three core operations: filtering, routing, and switching. These operations address three fundamental questions in physically mediated transformation: what inputs are selectively admitted, where signals propagate, and when the system transitions between states. Together, they enable selective responsiveness, spatial coordination, and state‐dependent behavior without dedicated electronic hardware. Design variables and quantitative metrics are proposed for each operation, and the framework is illustrated in locomotion and manipulation, providing guidance for designing mechanically intelligent robots. Responsive materials extend this framework by transducing environmental stimuli into mechanical signals while also harvesting ambient energy for actuation. Rather than replacing digital computation, mechanical intelligence complements it by embedding part of sensing, processing, and actuation into the physical body, pointing toward hybrid systems in which mechanical and digital intelligence work together.

  • Open Access

    Air-permeable hydrogels through viscoelastic phase separation of aerogels

    by Xiao-Yun Yan, Shucong Li, Won Jun Song, Runze Li, Aarosh Dahal, Bastien F. G. Aymon, Haodong Hu, Deep K. Malu, Gabriella E. Carreira, Jingjing Wu, et al.

    Hydrogels are widely used in biomedical interfaces, in which effective gas exchange (for example, O2, CO2) within a water-rich environment is essential. However, hydrogels show intrinsically limited air exchange efficiency, owing to the low solubility (C) and diffusivity (D) of non-polar gases in the polar water medium1. This limitation poses a substantial bottleneck in long-term applications, such as wearable health monitors2,3,4,5,6,7 and tissue engineering8,9,10,11,12. Existing methods13,14,15,16 to enhance air permeability suffer from poor robustness and/or an inherent trade-off between permeability and water content (for example, 17 (VPS)-enabled strategy to create a non-collapsible, air-rich network in high-water-content hydrogels, achieving a record-high oxygen permeability of 185 barrer with 70 vol% water—a tenfold increase compared with pristine hydrogels. VPS, a ubiquitous phenomenon in soft matter, is used to drive hydrophobic, dry gas particles within a hydrophilic, wet medium into a thin, stable three-dimensional network. This approach allows the facile and scalable fabrication of air-permeable hydrogels across diverse chemistries and form factors. Physiological tests over a 10-day continuous wear condition confirmed their effectiveness in preventing fluid accumulation and maintaining skin health. This strategy paves the way for hydrogels in long-term biomedical applications in which efficient and sustained air exchange becomes critical.


  • Open Access

    Liquid Crystal Elastomers Under Confinement: A Review of Template‐Based Fabrication and Applications

    by Meng Zhang, Le Yang, Xinyi Ding, James Phillip Scarbrough, Tushar Narayan Singh, Yuxing Yao, Shucong Li, Xiaoguang Wang

    Template‐assisted confinement has emerged as a versatile strategy for controlling the structure and function of liquid crystal elastomers (LCEs). By guiding mesogen alignment and polymer network formation within predefined geometries, these approaches enable LCEs with programmable actuation, optical properties, and mechanical responses. This review provides a comprehensive overview of templating methods for LCE fabrication, including planar substrates, porous scaffolds, droplet‐based confinement, colloidal assemblies, microstructured molds, fibrous templates, and direct ink writing. For each category, how the geometry, surface properties, and processing conditions influence alignment quality and material performance is highlighted. The unique capabilities and challenges associated with each method are also discussed. Finally, emerging directions such as hierarchical and reconfigurable templates, multifunctional composites, and applications in soft robotics, adaptive optics, and biomimetic systems are outlined. Overall, these insights highlight the growing potential of confinement‐guided approaches in advancing the next generation of responsive LCE materials.


  • Open Access

    Unusual Swelling Behavior of Hydrogels Modified with Spiropyran as Appendage or Crosslinker

    by Michael M. Lerch, Ankita Shastri, Thomas B. H. Schroeder, Amos Meeks, Shucong Li, Anna V. Shneidman, Michael Aizenberg, Joanna Aizenberg

    Stimuli‐responsive materials typically contain responsive molecular units that couple an external trigger to a defined macroscale response. Ongoing efforts to boost the versatility and complexity of these responses increasingly focus on multi‐stimuli‐responsive molecular units and crosslinkers, as these bear the potential to impart self‐regulatory behaviors building on cooperative effects and feedback mechanisms. Herein, such a stimuli‐responsive platform consisting of polyacrylamide‐based hydrogels with spiropyrans covalently bound as pendant groups or ‘non‐innocent’ crosslinkers is studied. Surprisingly, as compared to methylenebisacrylamide‐crosslinked poly(acrylamide‐ co ‐acrylic acid) gels incorporating monofunctional appended spiropyran, gels with bifunctional spiropyran as a secondary crosslinker swell up to twofold larger despite their increased crosslinking density. To uncover the origin of this unexpected behavior, we employ nanoindentation, swelling analysis, and UV–vis spectroscopy to study changes in mechanical properties and in spiropyran isomer equilibrium distribution as a function of solution pH, co‐monomer chemistry, and swelling‐induced polymer strain. The osmotic counterion pressures as a function of spiropyran isomer distribution were estimated but found to be insufficient to explain the observed behavior. The combined effects of (i) charge complexation, (ii) cooperativity between the hydrogel's mechanics and chemistry, and (iii) formation of aggregates may all be invoked to explain features of the observed ‘non‐innocence’ of spiropyran crosslinkers. Taken together, these insights aid rational implementation of such responsive crosslinkers in materials design and extend the functionality of existing polymeric materials toward more complex tunable behaviors, useful in soft robotics, microfluidics, drug delivery, or self‐regulated materials.


  • Programming liquid crystal elastomers for multistep ambidirectional deformability

    by Yuxing Yao, Atalaya Milan Wilborn, Baptiste Lemaire, Foteini Trigka, Friedrich Stricker, Alan H. Weible, Shucong Li, Robert K. A. Bennett, Tung Chun Cheung, Alison Grinthal, et al.

    Ambidirectionality, which is the ability of structural elements to move beyond a reference state in two opposite directions, is common in nature. However, conventional soft materials are typically limited to a single, unidirectional deformation unless complex hybrid constructs are used. We exploited the combination of mesogen self-assembly, polymer chain elasticity, and polymerization-induced stress to design liquid crystalline elastomers that exhibit two mesophases: chevron smectic C (cSmC) and smectic A (SmA). Inducing the cSmC-SmA–isotropic phase transition led to an unusual inversion of the strain field in the microstructure, resulting in opposite deformation modes (e.g., consecutive shrinkage or expansion and right-handed or left-handed twisting and tilting in opposite directions) and high-frequency nonmonotonic oscillations. This ambidirectional movement is scalable and can be used to generate Gaussian transformations at the macroscale.


  • Open Access

    Single-molecule visualization determines conformational substate ensembles in β-sheet–rich peptide fibrils

    by Wenbo Zhang, Ruonan Wang, Mingwei Liu, Shucong Li, Asher E. Vokoun, Weichen Deng, Robert L. Dupont, Feiyi Zhang, Shuyuan Li, Yang Wang, et al.

    An understanding of protein conformational ensembles is essential for revealing the underlying mechanisms of interpeptide recognition and association. However, experimentally resolving multiple simultaneously existing conformational substates remains challenging. Here, we report the use of scanning tunneling microscopy (STM) to analyze the conformational substate ensembles of β sheet peptides with a submolecular resolution (in-plane k B T s) in peptide homoassemblies of keratin (KRT) and amyloidal peptides (−5Aβ42 and TDP-43 341–357). Furthermore, STM reveals a change in the conformational ensemble of peptide mutants, which is correlated with the macroscopic properties of peptide assemblies. Our results demonstrate that the STM-based single-molecule imaging can capture a thorough picture of the conformational substates with which to build an energetic landscape of interconformational interactions and can rapidly screen conformational ensembles, which can complement conventional characterization techniques.


  • Self-regulated non-reciprocal motions in single-material microstructures

    by Shucong Li, Michael M. Lerch, James T. Waters, Bolei Deng, Reese S. Martens, Yuxing Yao, Do Yoon Kim, Katia Bertoldi, Alison Grinthal, Anna C. Balazs, et al.

    Living cilia stir, sweep and steer via swirling strokes of complex bending and twisting, paired with distinct reverse arcs1,2. Efforts to mimic such dynamics synthetically rely on multimaterial designs but face limits to programming arbitrary motions or diverse behaviours in one structure3,4,5,6,7,8. Here we show how diverse, complex, non-reciprocal, stroke-like trajectories emerge in a single-material system through self-regulation. When a micropost composed of photoresponsive liquid crystal elastomer with mesogens aligned oblique to the structure axis is exposed to a static light source, dynamic dances evolve as light initiates a travelling order-to-disorder transition front, transiently turning the structure into a complex evolving bimorph that twists and bends via multilevel opto-chemo-mechanical feedback. As captured by our theoretical model, the travelling front continuously reorients the molecular, geometric and illumination axes relative to each other, yielding pathways composed from series of twisting, bending, photophobic and phototropic motions. Guided by the model, here we choreograph a wide range of trajectories by tailoring parameters, including illumination angle, light intensity, molecular anisotropy, microstructure geometry, temperature and irradiation intervals and duration. We further show how this opto-chemo-mechanical self-regulation serves as a foundation for creating self-organizing deformation patterns in closely spaced microstructure arrays via light-mediated interpost communication, as well as complex motions of jointed microstructures, with broad implications for autonomous multimodal actuators in areas such as soft robotics7,9,10, biomedical devices11,12 and energy transduction materials13, and for fundamental understanding of self-regulated systems14,15.


  • Open Access

    Controlling Liquid Crystal Orientations for Programmable Anisotropic Transformations in Cellular Microstructures

    by Shucong Li, Gabriele Librandi, Yuxing Yao, Austin J. Richard, Alyssha Schneider‐Yamamura, Joanna Aizenberg, Katia Bertoldi

    Geometric reconfigurations in cellular structures have recently been exploited to realize adaptive materials with applications in mechanics, optics, and electronics. However, the achievable symmetry breakings and corresponding types of deformation and related functionalities have remained rather limited, mostly due to the fact that the macroscopic geometry of the structures is generally co‐aligned with the molecular anisotropy of the constituent material. To address this limitation, cellular microstructures are fabricated out of liquid crystalline elastomers (LCEs) with an arbitrary, user‐defined liquid crystal (LC) mesogen orientation encrypted by a weak magnetic field. This platform enables anisotropy to be programmed independently at the molecular and structural levels and the realization of unprecedented director‐determined symmetry breakings in cellular materials, which are demonstrated by both finite element analyses and experiments. It is illustrated that the resulting mechanical reconfigurations can be harnessed to program microcellular materials with switchable and direction‐dependent frictional properties and further exploit ”area‐specific” deformation patterns to locally modulate transmitted light and precisely guide object movement. As such, the work provides a clear route to decouple anisotropy at the materials level from the directionality of the macroscopic cellular structure, which may lead to a new generation of smart and adaptive materials and devices.


  • Top Cited Papers

    Liquid-induced topological transformations of cellular microstructures

    by Shucong Li, Bolei Deng, Alison Grinthal, Alyssha Schneider-Yamamura, Jinliang Kang, Reese S. Martens, Cathy T. Zhang, Jian Li, Siqin Yu, Katia Bertoldi, et al.

    The fundamental topology of cellular structures—the location, number and connectivity of nodes and compartments—can profoundly affect their acoustic1,2,3,4, electrical5, chemical6,7, mechanical8,9,10 and optical11 properties, as well as heat1,12, fluid13,14 and particle transport15. Approaches that harness swelling16,17,18, electromagnetic actuation19,20 and mechanical instabilities21,22,23 in cellular materials have enabled a variety of interesting wall deformations and compartment shape alterations, but the resulting structures generally preserve the defining connectivity features of the initial topology. Achieving topological transformation presents a distinct challenge for existing strategies: it requires complex reorganization, repacking, and coordinated bending, stretching and folding, particularly around each node, where elastic resistance is highest owing to connectivity. Here we introduce a two-tiered dynamic strategy that achieves systematic reversible transformations of the fundamental topology of cellular microstructures, which can be applied to a wide range of materials and geometries. Our approach requires only exposing the structure to a selected liquid that is able to first infiltrate and plasticize the material at the molecular scale, and then, upon evaporation, form a network of localized capillary forces at the architectural scale that ‘zip’ the edges of the softened lattice into a new topological structure, which subsequently restiffens and remains kinetically trapped. Reversibility is induced by applying a mixture of liquids that act separately at the molecular and architectural scales (thus offering modular temporal control over the softening–evaporation–stiffening sequence) to restore the original topology or provide access to intermediate modes. Guided by a generalized theoretical model that connects cellular geometries, material stiffness and capillary forces, we demonstrate programmed reversible topological transformations of various lattice geometries and responsive materials that undergo fast global or localized deformations. We then harness dynamic topologies to develop active surfaces with information encryption, selective particle trapping and bubble release, as well as tunable mechanical, chemical and acoustic properties.


  • Open Access

    Twist again: Dynamically and reversibly controllable chirality in liquid crystalline elastomer microposts

    by James T. Waters, Shucong Li, Yuxing Yao, Michael M. Lerch, Michael Aizenberg, Joanna Aizenberg, Anna C. Balazs

    Simulations show that a liquid crystalline elastomer post can be made to twist with both left and right chirality with light.