Theodosia Lourdes Thomas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Theodosia Lourdes Thomas has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Sarthak Misra
Department of Biomaterials and Biomedical Technology, University of Groningen and University Medical Centre Groningen, Groningen, 9713 AV, the Netherlands
5 shared publications - Venkatasubramanian Kalpathy Venkiteswaran
Surgical Robotics Laboratory Department of Biomechanical Engineering University of Twente Enschede The Netherlands
5 shared publications - Gondi Kondaiah Ananthasuresh
Indian Institute of Science, Bengaluru, India
3 shared publications - Giovanni Pittiglio
FuTURE Lab, Department of Robotics Engineering, Worcester Polytechnic Insitute (WPI), Worcester, MA, USA
1 shared publication - Jakub Sikorski
Surgical Robotics Laboratory, Department of Biomechanical Engineering, University of Twente, Enschede, The Netherlands
1 shared publication - James Henry Chandler
STORM Lab, Institute of Autonomous Systems and Sensing (IRASS), School of Electronic and Electrical Engineering, University of Leeds, Leeds, U.K.
1 shared publication
Latest Publications
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (6) , 3262-3269
A Magnetically-Actuated Coiling Soft Robot With Variable Stiffness
Soft and flexible magnetic robots have gained significant attention in the past decade. These robots are fabricated using magnetically-active elastomers, are capable of large deformations, and are actuated remotely thus allowing for small robot size. This combination of properties is appealing to the minimally invasive surgical community, potentially allowing navigation to regions of the anatomy previously deemed inaccessible. Due to the low forces involved, one particular challenge is functionalizing such magnetic devices. To address this limitation we introduce a proof-of-concept variable stiffness robot controlled by remote magnetic actuation, capable of grasping objects of varying sizes. We demonstrate a controlled and reversible high deformation coiling action induced via a transient homogeneous magnetic field and a synchronized sliding nitinol backbone. Our soft magnetic coiling grasper is visually tracked and controlled during three experimental demonstrations. We exhibit a maximum coiling deformation angle of 400 $^{\circ }$ .
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 8 (6) , 3262-3269
A Magnetically-Actuated Coiling Soft Robot With Variable Stiffness
Soft and flexible magnetic robots have gained significant attention in the past decade. These robots are fabricated using magnetically-active elastomers, are capable of large deformations, and are actuated remotely thus allowing for small robot size. This combination of properties is appealing to the minimally invasive surgical community, potentially allowing navigation to regions of the anatomy previously deemed inaccessible. Due to the low forces involved, one particular challenge is functionalizing such magnetic devices. To address this limitation we introduce a proof-of-concept variable stiffness robot controlled by remote magnetic actuation, capable of grasping objects of varying sizes. We demonstrate a controlled and reversible high deformation coiling action induced via a transient homogeneous magnetic field and a synchronized sliding nitinol backbone. Our soft magnetic coiling grasper is visually tracked and controlled during three experimental demonstrations. We exhibit a maximum coiling deformation angle of 400 $^{\circ }$ .
- Open Access
- 16 March 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (2)
A Magnetically Actuated Variable Stiffness Manipulator Based on Deployable Shape Memory Polymer Springs
Continuum manipulators have found several applications in surgical interventions like endoscopy, laparoscopy, and as end‐effectors for surgical robots. Continuum manipulators coupled with magnetic actuation can be precisely maneuvered inside the human body. Recently, variable stiffness manipulators (VSMs) have been introduced for enhanced dexterity and safe navigation. This study presents a new design of a magnetically actuated VSM based on shape memory polymer (SMP) springs. The VSM has a silicone backbone enclosed within a spring made of SMP that can change in length with stiffness change that is triggered by Joule heating. The stiffness and thermal characteristics of the VSM are studied using analytical models and experiments. Subsequently, a one‐segment VSM and a two‐segment VSM having outer diameters of 9 and 10 mm and lengths of 15 and 25 mm, respectively, capable of extending to four times their length are designed. The VSM can be deployed in a compact form and extended to achieve variable bending curvatures in soft and rigid states, which can facilitate instrument insertion and reduce operation invasiveness. Potential clinical applications are demonstrated by incorporating miniature camera, biopsy tool, and laser optical fiber in the working channel of the VSM and coupled with robotic magnetic actuation.
- 16 March 2023
- Published by Wiley in Advanced Intelligent Systems
- Vol. 6 (2)
Open AccessA Magnetically Actuated Variable Stiffness Manipulator Based on Deployable Shape Memory Polymer Springs
Continuum manipulators have found several applications in surgical interventions like endoscopy, laparoscopy, and as end‐effectors for surgical robots. Continuum manipulators coupled with magnetic actuation can be precisely maneuvered inside the human body. Recently, variable stiffness manipulators (VSMs) have been introduced for enhanced dexterity and safe navigation. This study presents a new design of a magnetically actuated VSM based on shape memory polymer (SMP) springs. The VSM has a silicone backbone enclosed within a spring made of SMP that can change in length with stiffness change that is triggered by Joule heating. The stiffness and thermal characteristics of the VSM are studied using analytical models and experiments. Subsequently, a one‐segment VSM and a two‐segment VSM having outer diameters of 9 and 10 mm and lengths of 15 and 25 mm, respectively, capable of extending to four times their length are designed. The VSM can be deployed in a compact form and extended to achieve variable bending curvatures in soft and rigid states, which can facilitate instrument insertion and reduce operation invasiveness. Potential clinical applications are demonstrated by incorporating miniature camera, biopsy tool, and laser optical fiber in the working channel of the VSM and coupled with robotic magnetic actuation.
- 6 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 4 (4) , 910-921
Design, Sensing, and Control of a Magnetic Compliant Continuum Manipulator
Continuum manipulators coupled with magnetic actuation have great potential as steerable instruments for diverse surgical applications. They can be maneuvered inside the human body to reach difficult-to-access surgical sites with contactless actuation. This paper presents a new design of a compliant continuum manipulator of diameter 3 mm and length 70 mm, capable of spatial bending under magnetic actuation. A quasi-static model is developed to estimate the 3D motion of the manipulator. Experiments report an overall mean error in whole shape estimation of the manipulator between the model and the ground truth of 1.7 mm and 4.8 mm, when suspended vertically and horizontally from its base, respectively. Furthermore, fiber Bragg grating (FBG) sensors are integrated with the manipulator to enable shape sensing. Closed-loop control is demonstrated to trace different trajectories with the tip of the manipulator. A square trajectory and a straight line trajectory are generated with an average error in tip position of 4.1 mm between the desired and estimated positions. The potential of the manipulator as a steerable instrument is validated by maneuvering it inside phantoms of a bifurcating arterial system and a heart with visual guidance from a miniature camera.
- 6 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Medical Robotics and Bionics
- Vol. 4 (4) , 910-921
Design, Sensing, and Control of a Magnetic Compliant Continuum Manipulator
Continuum manipulators coupled with magnetic actuation have great potential as steerable instruments for diverse surgical applications. They can be maneuvered inside the human body to reach difficult-to-access surgical sites with contactless actuation. This paper presents a new design of a compliant continuum manipulator of diameter 3 mm and length 70 mm, capable of spatial bending under magnetic actuation. A quasi-static model is developed to estimate the 3D motion of the manipulator. Experiments report an overall mean error in whole shape estimation of the manipulator between the model and the ground truth of 1.7 mm and 4.8 mm, when suspended vertically and horizontally from its base, respectively. Furthermore, fiber Bragg grating (FBG) sensors are integrated with the manipulator to enable shape sensing. Closed-loop control is demonstrated to trace different trajectories with the tip of the manipulator. A square trajectory and a straight line trajectory are generated with an average error in tip position of 4.1 mm between the desired and estimated positions. The potential of the manipulator as a steerable instrument is validated by maneuvering it inside phantoms of a bifurcating arterial system and a heart with visual guidance from a miniature camera.
- 22 January 2021
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (2)
Surgical Applications of Compliant Mechanisms: A Review
Current surgical devices are mostly rigid and are made of stiff materials, even though their predominant use is on soft and wet tissues. With the emergence of compliant mechanisms (CMs), surgical tools can be designed to be flexible and made using soft materials. CMs offer many advantages such as monolithic fabrication, high precision, no wear, no friction, and no need for lubrication. It is therefore beneficial to consolidate the developments in this field and point to challenges ahead. With this objective, in this article, we review the application of CMs to surgical interventions. The scope of the review covers five aspects that are important in the development of surgical devices: (i) conceptual design and synthesis, (ii) analysis, (iii) materials, (iv) manufacturing, and (v) actuation. Furthermore, the surgical applications of CMs are assessed by classification into five major groups, namely, (i) grasping and cutting, (ii) reachability and steerability, (iii) transmission, (iv) sensing, and (v) implants and deployable devices. The scope and prospects of surgical devices using CMs are also discussed.
- 22 January 2021
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 13 (2)
Surgical Applications of Compliant Mechanisms: A Review
Current surgical devices are mostly rigid and are made of stiff materials, even though their predominant use is on soft and wet tissues. With the emergence of compliant mechanisms (CMs), surgical tools can be designed to be flexible and made using soft materials. CMs offer many advantages such as monolithic fabrication, high precision, no wear, no friction, and no need for lubrication. It is therefore beneficial to consolidate the developments in this field and point to challenges ahead. With this objective, in this article, we review the application of CMs to surgical interventions. The scope of the review covers five aspects that are important in the development of surgical devices: (i) conceptual design and synthesis, (ii) analysis, (iii) materials, (iv) manufacturing, and (v) actuation. Furthermore, the surgical applications of CMs are assessed by classification into five major groups, namely, (i) grasping and cutting, (ii) reachability and steerability, (iii) transmission, (iv) sensing, and (v) implants and deployable devices. The scope and prospects of surgical devices using CMs are also discussed.
- 12 May 2020
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 12 (6) , 1-11
A Monolithic Compliant Continuum Manipulator: A Proof-of-Concept Study
Continuum robots have the potential to form an effective interface between the patient and surgeon in minimally invasive procedures. Magnetic actuation has the potential for accurate catheter steering, reducing tissue trauma and decreasing radiation exposure. In this paper, a new design of a monolithic metallic compliant continuum manipulator is presented, with flexures for precise motion. Contactless actuation is achieved using time-varying magnetic fields generated by an array of electromagnetic coils. The motion of the manipulator under magnetic actuation for planar deflection is studied. The mean errors of the theoretical model compared to experiments over three designs are found to be 1.9 mm and 5.1 deg in estimating the in-plane position and orientation of the tip of the manipulator, respectively, and 1.2 mm for the whole shape of the manipulator. Maneuverability of the manipulator is demonstrated by steering it along a path of known curvature and also through a gelatin phantom, which is visualized in real time using ultrasound imaging, substantiating its application as a steerable surgical manipulator.
- 12 May 2020
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 12 (6) , 1-11
A Monolithic Compliant Continuum Manipulator: A Proof-of-Concept Study
Continuum robots have the potential to form an effective interface between the patient and surgeon in minimally invasive procedures. Magnetic actuation has the potential for accurate catheter steering, reducing tissue trauma and decreasing radiation exposure. In this paper, a new design of a monolithic metallic compliant continuum manipulator is presented, with flexures for precise motion. Contactless actuation is achieved using time-varying magnetic fields generated by an array of electromagnetic coils. The motion of the manipulator under magnetic actuation for planar deflection is studied. The mean errors of the theoretical model compared to experiments over three designs are found to be 1.9 mm and 5.1 deg in estimating the in-plane position and orientation of the tip of the manipulator, respectively, and 1.2 mm for the whole shape of the manipulator. Maneuverability of the manipulator is demonstrated by steering it along a path of known curvature and also through a gelatin phantom, which is visualized in real time using ultrasound imaging, substantiating its application as a steerable surgical manipulator.