DRDmytro Radchuk

Dmytro Radchuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dmytro Radchuk has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Usage of Combined Filters under the Conditions of Coal Mines in Ukraine

    by Dmitro Radchuk, Sergiy Cheberyachko, Yurii Cheberyachko, Olena Sharovatova

    Efficiency of respiratory protective devices, specifically combined filters, is critical for preserving lives and health of workers. At the same time, existing approaches to evaluating the protective properties of filters often do not take real operation conditions, specifically inconstant physiological load of workers, which directly influences breathing intensity, air consumption volume and, respectively, filtration efficiency, into account.

  • Improvement of a Filter Box Design for Respirators with Pressure Drop Monitoring

    by Yurii Cheberyachko, Larisa Tretiakova, Dmitro Radchuk, Olena Sharovatova

    Mechanized underground mining processes of coal seams with subsequent transportation of rock mass at elevated temperatures of 40... 50 °C is always results in dust carbon oxides and sulfur. The relevance of the paper is in increasing the protection of miners who constantly use filtering respirators to protect their respiratory organs. Improve the design of a replaceable filter cartridge with a filter for respirators against dust by controlling the time of filter use before the critical value of breathing resistance occurs, which leads to a decrease in the protective properties of the respirator. Improving the design of a reusable replaceable filter box is proposed. A methodical approach to determining the differential pressure on the filter by the method of indirect measurement and the method of nonlinear approximation of experimental data has been used. An algorithm for the operation of the integrated pressure drop control and data processing unit is proposed. It involves the initialization of the microcontroller, recording the critical pressure drop value at the corresponding breathing modes, reading the initial pressure drop on the filter after the fifth cycle of inhalation and exhalation of air through the filter, monitoring the value of the sensor's electrical resistance, calculating the value of the current pressure drop and its increase in time with the determination of the filter's operating time. The design of a replaceable filter box with a filter for dust respirators has been improved by placing a lever system on the bottom wall of the filter box, on which a thin-film resistive pressure sensor is mounted. The sensor is connected to an integrated pressure drop control and data processing unit to monitor changes in the pressure drop across the filter and determine the time of their operation. The measured values of the sensor's electrical resistance from 33.4 to 22.0 kОm show that it responds sensitively to the pressure drop range from 68 to 126 Pa, which fully meets the needs of monitoring the respirator when the air flow rate changes from 30 to 160 dm 3 /min; at the same time, the average deviation is about 3.1 %, which is a good indicator that shows that the lever system allows you to convert the sensor's electrical resistance readings into the filter pressure drop value successfully.

  • Open Access

    Удосконалення алгоритму роботи автоматичних систем протипожежного захисту

    by Єгор Жир, Дмитро Радчук

    Проведено системний огляд та порівняльний аналіз архітектур комп’ютерного зору і моделей глибокого машинного навчання отримано систематизовані дані щодо функціональних обмежень існуючих рішень на базі згорткових нейронних мереж. Доведено їхню значну залежність від прямої видимості осередку займання та високу чутливість до складних змін освітленості. На основі цих недоліків розроблено теоретичну концепцію оптимізованого двоетапного алгоритму роботи системи комп’ютерного зору для раннього виявлення пожежі в замкнених промислових приміщеннях за умов прихованого полум’я. Встановлено, що ефективність локалізації вогню може бути суттєво підвищена завдяки поєднанню методів прямого розпізнавання полум’я та аналізу непрямих візуальних ознак пожежі. Підхід обґрунтовано шляхом теоретичного моделювання декомпозиції коротких відеофрагментів на кадри з фіксованою частотою для подальшого математичного обчислення часових коливань загальної яскравості, специфічних відблисків та динамічного мерехтіння світла. Зафіксовано доцільність використання різкого зниження інтенсивності освітлення внаслядок раптового задимлення як визначальної непрямої ознаки для локалізації. Обґрунтовано перспективу формування спеціальних часових рядів похідних параметрів замість традиційної обробки пікселів усього зображення з їх подальшою передачею на вхід нейромережевих моделей для розпізнавання унікальних хаотично-періодичних паттернів оптичних змін. Сформовано лише теоретичні засади та технологічні параметри запропонованої архітектури, тоді як розробка програмного забезпечення, навчання моделей нейронних мереж та їх практичне тестування на базі датасетів визначено завданнями для наступних статей. Результати підтверджують можливість майбутньої модернізації наявних систем відеоспостереження без залучення значних додаткових апаратних витрат.

  • Open Access

    РОЗРОБКА НОВОЇ КОНСТРУКЦІЇ ФІЛЬТРУВАЛЬНОГО РЕСПІРАТОРА ДЛЯ ГІРНИКІВ

    by Юрій Іванович Чеберячко, Руслан Євгенійович Хома, Дмитро Ігорович Радчук, Олег Анатолійович Муха, Дмитро Вячеславович Шошин, Олексій Павлович Єфіменко

    Метою роботи є розробка нової конструкції фільтрувального респіратора для гірничих підприємств з урахуванням антропометричних параметрів облич працівників з покращеною формою смуги обтюрації. Використано метод оптичної тріангуляції для побудови 3D-моделі півмаски респіратора на основі визначення координат ключових антропометричних точок, а також функцію Гаусса радіального вигляду для згладжування та локальної підгонки моделі півмаски до топології обличчя користувача. Використано процес розробки півмаски на основі цифрового зображення обличчя, який складається з формування контурів півмаски за висотою і довжиною обличчя та визначення дизайну смуги обтюрації. Розроблено нову конструкцію фільтрувального респіратора з покращеною формою смуги обтюрації, яка враховує антропометрію обличчя користувача. Вдосконалено метод 3D-моделювання півмаски респіратора шляхом визначення координат ключових антропометричних точок облич потенційних користувачів методом оптичної тріангуляції. Запропоновано процес визначення площі прилягання смуги обтюрації півмаски до обличчя користувача. Встановлено, що зі збільшенням розміру півмаски площа контакту смуги обтюрації півмаски з обличчям зменшується, що пов’язано зі зміною геометрії самої півмаски. Визначено, що респіратор до 70 % своєї смуги обтюрації контактує з обличчям людини в ділянці щік. Наукова новизна полягає в удосконаленні процесу проєктування півмаски фільтрувального респіратора з використанням методу оптичної тріангуляції для побудови півмаски за ключовими антропометричними точками, а також функцію Гаусса радіального вигляду для локальної підгонки смуги обтюрації півмасок до топологічної структури обличчя користувача. Практична цінність полягає у розробці процесу процес визначення площі прилягання смуги обтюрації півмаски до обличчя користувача.

  • Open Access

    Development of a Filtering Respirator with a Real-Time Monitoring Device for Pressure Drop

    by Yurii Cheberiachko, Dmytro Radchuk, Serhii Cheberiachko, Dmytro Slavinskyi, Bohdan Kravchenko

    Purpose. Development of a filtering respirator with a device for operational pressure drop control. Method: The development of the filtering respirator with a real-time monitoring device for pressure drop involves the use of the following equipment: the ESP32-C6-LCD-1.47 microcontroller with a video display, and the MPXV7002DP FRS pressure sensor, which enable monitoring of the pressure drop caused by dust accumulation, based on determining the critical filter resistance value. Findings. A real-time monitoring device for pressure drop in the respirator filter box has been developed. It provides prerequisites for improving worker safety in hazardous conditions and extends the possibilities of personalizing respiratory protective equipment according to specific operational requirements and users’ physiological characteristics. The developed algorithm of the device enhances the protective properties of the filtering respirator by timely informing the user about the pressure drop status of the filter, which is associated with half-mask tightness and battery charge level. A mathematical model has been proposed, correlating filter parameters, breathing mode, and the characteristics of the pressure drop sensor, which allows for determining changes in the pressure drop across the filter element depending on dust accumulation on the filter surface. This makes it possible to control filter service life by comparing it with the critical pressure drop value. Paper type. Experimental studies of filtering respirator’ performance indicators.

  • Analysis of the Design of Filter Cartridge Covers for Respirators against Dust

    by Dmitro Radchuk, Yurii Cheberiachko, Olena Stolbchenko, Dmytro Shoshyn, Oleksii Yefimenko

    The study focuses on optimizing the design of respirator filter cartridges against particles to minimize their impact on ergonomic performance. The aim is to determine the uniformity of airflow distribution in the filter. Numerical analysis in SolidWorks Flow Simulation was applied to assess the effect of design parameters. Covers with a round inlet, smooth edges and an inner surface ensured the most uniform flow and reduced pressure drop. Cartridges with a central outlet showed higher velocity (by 10 %) and pressure (by 15 %) variation than those with an offset outlet, as air moves directly to the centre. Increasing airflow from 30 l/min to 95 l/min improved uniformity, reducing velocity variation to 25 % and pressure to 30 %. The outer cover and geometry of the cartridge were proven to influence airflow distribution, ensuring efficient use of the entire filter surface. With elliptical and square inlets, velocity variation increased from 30 % to 50 % compared to round inlets, due to asymmetrical pressure distribution. The scientific value lies in identifying the influence of inlet/outlet geometry on airflow velocity and pressure distribution, while the practical outcome is defining optimal inlet dimensions for efficient, comfortable respirators.

  • IMPROVEMENTS TO ELECTRONIC TRACKING SYSTEMS FOR PERSONAL PROTECTIVE EQUIPMENT AT INDUSTRIAL FACILITIES

    by Yurii Cheberiachko, Dmytro Radchuk, Nikita Kramarenko, Yehor Zhir, Volodymyr Nadtochii

    Purpose. Development, justification, and experimental testing of an improved electronic accounting system for personal protective equipment (PPE) at industrial facilities, which provides automatic control of issuance/return, monitoring of service life, and integration with existing safety infrastructure, thereby significantly increasing the reliability and efficiency of occupational safety systems in conditions of heightened industrial risks and military operations in Ukraine. Methods. The study combined analytical methods (a critical review of regulatory documents, scientific publications, and existing practices for PPE management at coal mines, gas stations, chemical plants, and underground parking garages) with experimental research. Results. For the first time, a comprehensive method for electronic PPE tracking is proposed, which ensures fully automated monitoring of service life and wear percentage with color-coded criticality indicators (red — overdue or 100% wear, orange — ≤7 days until replacement, yellow — 8–30 days), integration with job presets (electric and gas welder, plumber, electrician, etc.) and instant application of issuance standards with a single click. The proposed algorithm for synchronizing data between the “Standards” and “Operational Accounting” tables eliminates duplicate data entry and ensures data consistency. Scientific novelty. The developed system radically simplifies daily PPE inspections, which are performed exclusively by on-duty personnel, eliminates paper documentation, minimizes human error, and ensures immediate access blocking upon detection of defective or expired PPE (in case of further integration with access control systems). Implementation at coal mines, gas stations, chemical plants, and underground parking garages will significantly improve occupational safety, especially under martial law in Ukraine, and can be scaled to any industrial facility. Keywords: digital personal protective equipment tracking, automatic service life monitoring, industrial facilities, occupational safety, integration with access control, reliability of safety systems.

  • Open Access

    FEATURES OF DETERMINING THE REGULATORY SAFE SERVICE LIFE OF PERSONAL PROTECTIVE EQUIPMENT

    by Vitalii Tsopa, Serhii Cheberyachko, Dmytro Radchuk, Oleksii Efimenko

    Purpose. To analyze the specific features and develop a process for determining a normatively justified safe service life of personal protective equipment (PPE). Design/methodology/approach. A comparative legal method was applied to analyze the provisions of Ukrainian legislation (NPAOP 45.2-3.01-04), EU Directive 89/656/EEC, and the “Minimum Requirements.” Content analysis of technical regulations and EN standards was used to identify discrepancies and priorities. Risk assessment was carried out using the “bowtie” method, which makes it possible to establish causal links between hazards, hazardous events, and preventive measures. Conclusions. It is shown that resolving the conflict regarding PPE issuance norms is possible through the implementation of a risk-oriented approach and EN standards that define technical characteristics and actual service life of PPE. It is proven that the collective agreement is a key mechanism for aligning risk assessment results with tax regulations and allows for substantiating PPE replacement without tax consequences. It is recommended to determine PPE service life based on actual wear and protective efficiency, confirming the employer’s compliance with the obligation to ensure safe working conditions. Limitation/consequences of research. The proposed approach requires high-quality documentation and regular updates of risk assessment results, as well as effective internal audits. Practical value. An algorithm has been developed for formalizing PPE issuance norms and service life through a collective agreement based on risk-oriented assessment, internal audit, and EN standards requirements. This ensures tax neutrality of PPE-related operations and strengthens enterprise protection during inspections. Originality and significance of the results. A new model is proposed for legal harmonization of occupational safety requirements and tax legislation, integrating risk assessment, EN standards, and audit results into an evidence base for establishing justified PPE norms. The model reduces subjectivity in expert decisions and enhances the effectiveness of occupational safety and compliance systems.

  • HUMAN RELIA ЁBILITY ASSESSMENT IN THE USE OF RESPIRATORS UNDER INDUSTRIAL CONDITIONS

    by Bohdan Kravchenko, Vasyl Holinko, Dmytro Radchuk

    Aim. To investigate the impact of respirators on the physiological state of the worker for a quantitative assessment of human reliability, which will allow the development of recommendations for work organization that take into account not only regulatory requirements but also the actual physiological load on the human body. Methodology. To determine the level of physical and physiological impact of respirators on humans, operational tests were conducted according to EN 13274-2, which included sitting without performing any work for 5 minutes without a respirator, walking on a horizontal surface at full height with a constant speed from 2 to 8 km/h for 3 minutes at each speed in a respirator, and walking on a horizontal surface at full height with a constant speed from 2 to 8 km/h for 3 minutes at each speed in a respirator while speaking words. After each test, the testers filled out a checklist to assess comfort. During the test, temperature and relative air humidity were measured in the sub-mask space. To parameterize the influence of the microclimate in the sub-mask space and the psychophysiological state of the operator on the reliability of actions within the SPAR-H approach, a system of empirical linear correction coefficients KT, KH, and KP is proposed. The assessment of human energy expenditure during the tests was performed using the ACSM methodology. Results. The work developed a methodology for quantitative assessment of human reliability when using respirators based on a modified SPAR-H approach. It was established that the temperature in the sub-mask space increases by 2-3 °C, and humidity by 5–15 %, which is accompanied by an increase in pulse rate by 10-20 bpm. This leads to a decrease in the reliability coefficient to 0.56–0.65 in full-face masks under high loads, while half-masks with filters maintain stable indicators (0.74-0.79). Scientific novelty. An algorithm for selecting a respirator depending on the severity of work and the level of danger is proposed. It was established that filtering half-masks are most suitable for light and short-term tasks, half-masks with filters for medium-severity work involving communication, and full-face masks for hazardous static work. Practical significance. An algorithm for selecting the type of respirators taking into account the performed work has been developed. The obtained results provide a basis for regulating the wearing time of RPE and reducing the risks of overfatigue and errors in production conditions. Keywords: human reliability, respirator, microclimate, physical load, comfort assessment

  • DEVELOPMENT OF A RISK ASSESSMENT PROGRAM FOR THE USE OF HAZARDOUS CHEMICAL SUBSTANCES AT ENTERPRISES

    by Ruslan Khoma, Dmytro Radchuk, Serhii Cheberyachko, Dmytro Shoshyn, Oleksii Efimenko

    Purpose. To develop a qualitative approach for risk assessment related to the impact of hazardous chemical substances (HCS). Methodology. The article presents a three-stage methodology for assessing the risk of accidental HCS releases, specifically sulfur dioxide, in industrial settings. The first stage involves collecting baseline information about potential accidental releases of hazardous chemicals. The second stage involves expert assessment, including the evaluation of accident probability and severity of consequences. The third stage uses the determined risk level to develop mitigation measures. Based on a literature review, the data were systematized, and a checklist was developed to assist in risk assessment. The overall risk assessment is categorized into three levels: low, medium and high. The methodology considers the quantity of the substance, affected area, presence of personnel, and available response measures. The results can be integrated into an enterprise’s occupational safety management system, enabling effective safety planning and improved emergency preparedness. Results. The paper presents the results of a risk assessment concerning sulfur dioxide exposure in underground coal mines. A checklist is proposed for assessing HCS-related risks. Based on evaluations across 11 criteria, the overall risk level was classified as high, requiring immediate response and implementation of safety enhancement measures. The most critical risk factors include the substance's high toxicity, the large area, limited time of emergency services, and the presence of vulnerable facilities. Accident scenarios involving HCS were modeled. Steps for integrating the risk assessment program into the enterprise's occupational safety management system are proposed. Scientific novelty. For the first time, a 5×5 matrix adapted to cumulative sulfur dioxide exposure conditions is applied, allowing for the assessment of both acute and long-term health effects on workers. Practical significance. The practical value lies in the development of a risk assessment checklist tailored to workplace HCS incidents. Typical accident scenarios involving sulfur dioxide in mines are proposed, enabling simulation of event progression and risk evaluation under real operational conditions. Key words: risk assessment program, sulfur dioxide, checklist, accident scenarios, risk matrix.