BKBohdan Kravchenko

Bohdan Kravchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bohdan Kravchenko has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Filtering Respirator with a Real-Time Monitoring Device for Pressure Drop

    by Yurii Cheberiachko, Dmytro Radchuk, Serhii Cheberiachko, Dmytro Slavinskyi, Bohdan Kravchenko

    Purpose. Development of a filtering respirator with a device for operational pressure drop control. Method: The development of the filtering respirator with a real-time monitoring device for pressure drop involves the use of the following equipment: the ESP32-C6-LCD-1.47 microcontroller with a video display, and the MPXV7002DP FRS pressure sensor, which enable monitoring of the pressure drop caused by dust accumulation, based on determining the critical filter resistance value. Findings. A real-time monitoring device for pressure drop in the respirator filter box has been developed. It provides prerequisites for improving worker safety in hazardous conditions and extends the possibilities of personalizing respiratory protective equipment according to specific operational requirements and users’ physiological characteristics. The developed algorithm of the device enhances the protective properties of the filtering respirator by timely informing the user about the pressure drop status of the filter, which is associated with half-mask tightness and battery charge level. A mathematical model has been proposed, correlating filter parameters, breathing mode, and the characteristics of the pressure drop sensor, which allows for determining changes in the pressure drop across the filter element depending on dust accumulation on the filter surface. This makes it possible to control filter service life by comparing it with the critical pressure drop value. Paper type. Experimental studies of filtering respirator’ performance indicators.

  • HUMAN RELIA ЁBILITY ASSESSMENT IN THE USE OF RESPIRATORS UNDER INDUSTRIAL CONDITIONS

    by Bohdan Kravchenko, Vasyl Holinko, Dmytro Radchuk

    Aim. To investigate the impact of respirators on the physiological state of the worker for a quantitative assessment of human reliability, which will allow the development of recommendations for work organization that take into account not only regulatory requirements but also the actual physiological load on the human body. Methodology. To determine the level of physical and physiological impact of respirators on humans, operational tests were conducted according to EN 13274-2, which included sitting without performing any work for 5 minutes without a respirator, walking on a horizontal surface at full height with a constant speed from 2 to 8 km/h for 3 minutes at each speed in a respirator, and walking on a horizontal surface at full height with a constant speed from 2 to 8 km/h for 3 minutes at each speed in a respirator while speaking words. After each test, the testers filled out a checklist to assess comfort. During the test, temperature and relative air humidity were measured in the sub-mask space. To parameterize the influence of the microclimate in the sub-mask space and the psychophysiological state of the operator on the reliability of actions within the SPAR-H approach, a system of empirical linear correction coefficients KT, KH, and KP is proposed. The assessment of human energy expenditure during the tests was performed using the ACSM methodology. Results. The work developed a methodology for quantitative assessment of human reliability when using respirators based on a modified SPAR-H approach. It was established that the temperature in the sub-mask space increases by 2-3 °C, and humidity by 5–15 %, which is accompanied by an increase in pulse rate by 10-20 bpm. This leads to a decrease in the reliability coefficient to 0.56–0.65 in full-face masks under high loads, while half-masks with filters maintain stable indicators (0.74-0.79). Scientific novelty. An algorithm for selecting a respirator depending on the severity of work and the level of danger is proposed. It was established that filtering half-masks are most suitable for light and short-term tasks, half-masks with filters for medium-severity work involving communication, and full-face masks for hazardous static work. Practical significance. An algorithm for selecting the type of respirators taking into account the performed work has been developed. The obtained results provide a basis for regulating the wearing time of RPE and reducing the risks of overfatigue and errors in production conditions. Keywords: human reliability, respirator, microclimate, physical load, comfort assessment

  • Open Access

    Improvement of the model for calculating the protection coefficient of filtering respirators from harmful aerosol

    by S. Cheberiachko, Д.і. Радчук, O. Deryuhin, Yu. Cheberiachko, М.м. Наумов, Б.д. Кравченко, С.і. Чеберячко, О.в. Дерюгін, Ю.і. Чеберячко

    Research objective. Improvement of the model for calculating the protection coefficient of filtering respirators from harmful solid aerosol. Materials and methods. For the experimental determination of the protection coefficient of the filtering respirator according to the standard DSTU EN 149:2017 «Personal respiratory protective devices. Filtering half masks to protect against aerosols. Requirements, testing, marking» and the application of the method DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient», lightweight filtering half masks of «Standard» FFP2 type were used on volunteers. Results. The protection coefficient of the filtering respirators used on volunteers in laboratory conditions was calculated at the specified concentration of test aerosol in the ambient air by the standard testing method described in DSTU EN 13274-1:2005 «Personal respiratory protective devices. Methods of testing. Part 1. Determination of the penetration coefficient and the overall penetration coefficient» and takes into account the measurement error from the instruments not exceeding 10%. A comparison of the obtained indicators of the protection coefficient of filtering respirators in laboratory conditions and with the developed theoretical model, taking into account particle deposition in the sampling probe and submask space during the exhalation process, showed a good agreement of the indicators by the Student's t-test criterion. Scientific novelty. The scientific novelty lies in the development of a model for calculating the protection coefficient of filtering respirators based on the assessed mass distribution function of aerosol particles in the breathing zone; penetration function through the gap between the face and the half mask, taking into account the inhalation and exhalation process, as well as particle deposition in the sampling probe. Practical significance of the work lies in the development of a formula for the theoretical determination of the protection coefficient of filtering respirators, which is used to calculate the professional risk of pneumoconiosis among users

  • EVALUATION OF OPERATIONAL RISKS OF RESPIRATORY PROTECTIVE EQUIPMENT

    by National Technical University "Dnipro Polytechnic", Vasyl Holinko, Dmytro Radchuk, Serhii Cheberiachko, Mykola Naumov, Bohdan Kravchenko, Oleh Deryugin

    For assessing the risks of hazardous events at gas stations, the "HAZOP" and "FMEA" methods were chosen because they complement each other well and allow for detailed analysis of each stage of the production process to identify hazards and assess the overall system's operability.An analysis of nonconformities during the operation of respirators was conducted based on the requirements of Commission Communiqué 89/C 328/02 (Official Journal of the European Communities No. C 328). A method for evaluating operational risks of respiratory protective equipment (RPE) was developed, consisting of four steps: identifying nonconformities or defects, determining the magnitude of operational risk, assessing the risk priority number, and justifying preventive measures. It was proposed to use the "HAZOP" method for identifying nonconformities or defects, which allows qualitatively identifying the relationship between nonconformity, hazardous events, and the consequences regarding the loss of RPE protective effectiveness through the use of keywords. The "FMEA" method was proposed for evaluating the magnitude of operational risk, as it allows for identifying nonconformities or defects during RPE operation. The scientific novelty lies in establishing operational risk through the risk priority number, which is determined considering the identification of nonconformities or defects during the operation of respiratory protective equipment. The practical value lies in developing a new approach for evaluating operational risks using a combination of the "HAZOP" and "FMEA" methods, which improves the accuracy of the assessment and provides more detailed recommendations to prevent the loss of protective effectiveness of respiratory protective equipment during operation.Keywords:Risk assessment, RPE, "HAZOP" method, "FMEA" method, hazardous event, operational risk magnitude, risk priority number magnitude.

  • Open Access

    Development of a new classification of re-sources individual respiratory protection

    by S. Cheberyachko, Д.і. Радчук, O. Deryugin, Н.с. Сушко, Б.д. Кравченко

    Метою дослідження – є розробка нової класифікації засобів індивідуального захисту органів дихання (далі – ЗІЗОД), яка сприятиме якісному їх вибору для відповідних виробничих умов використання з урахуванням оцінки професійних ризиків (далі – ПР). Проведено аналіз законодавства України, Європейського Союзу та інших країн світу стосовно використовуваних класифікацій ЗІЗОД. Встановлено, що існуючі системи класифікації є застарілими й не задовольняють вимогам щодо їх вибору на основі оцінки ПР. Проаналізовані публікації, які стосуються даної проблеми, та розглянуті запропоновані шляхи удосконалення існуючих систем класифікацій з урахуванням нормативних документів щодо мінімального забезпечення ЗІЗОД працівників різних виробництв. Шляхом системного аналізу визначено найбільш слабкі місця в існуючих системах класифікації країн світу. Розглянуті слабкі сторони класифікації ЗІЗОД, що викладено в стандарті ISO/TS 16973. Запропоновано новий підхід до класифікації ЗІЗОД з урахуванням міжнародних стандартів та загально прийнятих підходів в інших країнах, враховуючи вимоги до оцінки ПР. Основною відмінністю нової класифікації є поділ ЗІЗОД на основі спільних характеристик, що дозволить виділити певні відділи, підвідділи, групи, підгрупи, види, підвиди й різновиди, які повністю охоплять всі їх конструктивні особливості. Це допоможе з розумінням розробити послідовність дій при їх виборі та чітко зрозуміти структурну взаємодію між різними групами й визначити ступінь розгалуженості можливих варіантів. Розроблена класифікація є першою спробою у розподілі всіх існуючих ЗІЗОД за зрозумілим ієрархічним порядком підлеглості нижчих ланок вищим, починаючи з відділу – фільтрувальні ЗІЗОД і закінчуючи різновидом – за ступенем досконалості конструкції фільтрувальних респіраторів або/і їх складових щодо фізіологічних вимог