Mehmet Hakan Aksit has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A High-Performance Onboard Supercapacitor ESS with SiC Power MOSFET Buck–Boost Converter for Railway Applications

    by Mehmet Hakan Akşit, Doğan Yıldırım, Muammer Ermiş, Işık Çadırcı

    This paper is devoted to the design and implementation of a high-performance onboard Supercapacitor energy storage system (ESS) with a SiC power MOSFET-based buck–boost converter for railway applications. The SiC power MOSFET-based buck–boost converter can be switched at higher frequencies than those of Si-IGBT and Hybrid-IGBT counterparts, resulting in significant volume and cost reduction in the buck–boost inductor. A new operating strategy is proposed for a Supercapacitor ESS to optimize the electrical energy savings of a light rail transportation system (LRTS) while running on a prespecified rail track. In the Optimized Operating Strategy, regenerative braking torque and power profiles are pre-programmed before departing from each station to allow the storage of almost all of the kinetic energy of the vehicle in a Supercapacitor ESS. Details of the proposed Optimized Operating Strategy are described in a comparative manner with the Standard Operating Strategy in the paper. Furthermore, effects of the type of interface circuit between the DC catenary line and the AC grid are also discussed in view of the net energy consumption of the LRTS from the AC grid while operating on a typical rail track. All theoretical results are verified by experimental work conducted on a physical simulator. The results obtained show that an onboard Supercapacitor ESS with an Optimized Operating Strategy provides 36% energy savings with respect to the base case with no ESS of a railway vehicle moving on a prespecified track and supplied from a unidirectional interface circuit between the DC catenary and AC grid. This paper is accompanied by a video demonstrating the experimental work.

  • Open Access

    Design and Implementation of a Full SiC-Based Phase-Shifted Full-Bridge DC-DC Converter with Nanocrystalline-Cored Magnetics for Railway Battery Charging Applications

    by Fatih Enes Gocen, Salih Baris Ozturk, Mehmet Hakan Aksit, Gurkan Dugan, Benay Cakmak, Caner Demir

    This paper presents the design and implementation of a high-efficiency, full silicon carbide (SiC)-based center-tapped phase-shifted full-bridge (PSFB) converter for NiCd battery charging applications in railway systems. The converter utilizes SiC MOSFET modules on the primary side and SiC diodes on the secondary side, resulting in significant efficiency improvements due to the superior switching characteristics and high-temperature tolerance inherent in SiC devices. A nanocrystalline-cored center-tapped transformer is optimized to minimize voltage stress on the rectifier diodes. Additionally, the use of a nanocrystalline core provides high saturation flux density, low core loss, and excellent permeability, particularly at high frequencies, which significantly enhances system efficiency. The converter also compensates for temperature fluctuations during operation, enabling a wide and adjustable output voltage range according to the temperature differences. A prototype of the 10-kW, 50-kHz PSFB converter, operating with an input voltage range of 700–750 V and output voltage of 77–138 V, was developed and tested both through simulations and experimentally. The converter achieved a maximum efficiency of 97% and demonstrated a high power density of 2.23 kW/L, thereby validating the effectiveness of the proposed design for railway battery charging applications.


  • Open Access

    All-SiC Traction Converter for Light Rail Transportation Systems: Design Methodology and Development of 165 kVA Prototype

    by Doğan Yıldırım, Mehmet Hakan Akşit, Işık Çadırcı, Muammer Ermiş

    The design and development of a high-performance 165 kVA, 750 V DC all-silicon carbide (SiC) traction converter for new generation light rail transportation systems (LRTSs) are described. In the design of the traction motor drive, the efficiency of the overall system is maximized and the line current harmonic content of the traction motor is minimized. A complete mathematical model of the physical system is derived to carry out real-time simulations and proper control of the LRTS on a real rail track. The electrical and thermal performances of traction-type SiC power MOSFET modules are compared with those of alternative hybrid and Si-IGBT modules for various switching frequencies. The implementation of the developed system is also described. The performance of the resulting system is verified experimentally on a full-scale physical simulator as well as for various track conditions. Very promising results for the next generation railway traction motor drives have been obtained in terms of performance criteria, such as very high efficiency, low harmonic distortion of the motor line current, low cooling requirement, relatively high switching frequency, and hence, superior controller performance. The effects of the SiC power MOSFET operation on the insulation of the available traction motors are also examined experimentally. This paper is accompanied by a video demonstrating the experimental work.


  • Full-Scale Physical Simulator of All SiC Traction Motor Drive With Onboard Supercapacitor ESS for Light-Rail Public Transportation

    by Dogan Yildirim, Mehmet Hakan Aksit, Cem Yolacan, Tevfik Pul, Cezmi Ermis, Behrang Hosseini Aghdam, Isik Cadirci, Muammer Ermis

    This paper deals with the design, and laboratory implementation of a full scale, physical simulator of an all silicon carbide (SiC) traction motor drive for Light-Rail Transit Systems (LRTS) with on-board super-capacitor energy storage system (ESS). It consists of a PWM rectifier representing the 750 V DC catenary line, a three-phase two-level PWM traction inverter to drive a three-phase squirrel-cage traction motor, a flywheel coupled to the motor shaft to represent the dynamic behaviour of the transportation vehicle, a loading generator connected to the grid via DC link converter with active front-end, and a supercapacitor ESS containing a bidirectional DC/DC converter supplied from the common DC link. PWM rectifier, traction inverter and bidirectional DC/DC converter are all SiC power MOSFET based converters for high efficiency and high power density. The physical simulator is a valuable tool in the design and testing of all SiC converters. It is equipped with software programs for catenary model, rail-track model and vehicle model, and permits the performance verification of various control, modulation, and energy saving strategies. The physical simulator system developed in this research work allows the performance verification of a vehicle formation on a pre-specified real track and evaluation of benefits of the on-board supercapacitor ESS in real-time.