AGArkadiusz Gorzawski

Arkadiusz Gorzawski

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Arkadiusz Gorzawski has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dynamics of the interaction of dust particles with the LHC beam

    by B. Lindstrom, P. Bélanger, A. Gorzawski, J. Kral, A. Lechner, B. Salvachua, R. Schmidt, A. Siemko, M. Vaananen, D. Valuch, et al.

    Micrometer-sized dust particles present in the Large Hadron Collider (LHC) beam pipe are believed to have caused many thousands of sporadic beam loss events around the LHC. These so-called unidentified falling objects (UFOs) have been under continuous study since the start of high intensity beam operation in the LHC due to their impact on the LHC availability: 139 beam dumps and 12 magnet quenches during Run II (2015–2018) alone. To mitigate the impact of UFOs on future accelerators such as the High Luminosity LHC and the Future Circular Collider, it is fundamental to foster a better understanding of these beam loss events. In this paper, key observations made since the start of LHC operation are summarized and the prevailing UFO hypothesis is confronted by a compilation of observations acquired during Run II. In particular, it is shown that UFOs must carry an initial negative charge before entering the proton beam, or that they are by some other means accelerated toward the beam not only by gravity. A simulation model for the dynamics of the dust particles and their interaction with the beam was developed over the years. This model is improved and validated by measurements. It is however also shown that a subset of observed beam losses, which contain a positive time profile skewness, cannot be explained by it.


  • Open Access

    Collimation of partially stripped ions in the CERN Large Hadron Collider

    by A. Gorzawski, A. Abramov, R. Bruce, N. Fuster-Martinez, M. Krasny, J. Molson, S. Redaelli, M. Schaumann

    In the scope of the Physics Beyond Colliders studies, the gamma-factory initiative proposes the use of partially stripped ions as a driver of a new type of high-intensity photon source in CERN Large Hadron Collider (LHC). In 2018, the LHC accelerated and stored partially stripped Pb20881+ ions for the first time. The collimation system efficiency recorded during this test was found to be prohibitively low, so that only a very low-intensity beam could be stored without the risk of triggering a beam dump when regular, minor beam losses occur. The worst losses were localized in the dispersion suppressor of the betatron-cleaning insertion. This article presents an analysis to understand in detail the source of these losses. Based on this understanding, possible mitigation measures that could significantly improve the cleaning efficiency and enable regular operation with partially stripped ions in the future are developed.


  • Open Access

    Gamma Factory for CERN initiative - progress report

    by Yann Dutheil, Andrey Abramov, Siobhan Alden, Reyes Alemany Fernandez, Pavel Antsiferov, Armen Apyan, Hannes Bartosik, Evgeny Bessonov, Nicolo Biancacci, Jacek Bieron, et al.

    The Gamma Factory (GF) initiative proposes to use partially stripped ion (PSI) beams as drivers of a new type of high-intensity and high-energy (0.1–400 MeV) photon source. As part of the ongoing Physics Beyond Collider studies, initial beam tests were carried out in 2017 and 2018 at the SPS and LHC with partially stripped xenon and lead beams. This contribution discusses the results of these tests and the preparations for the next GF R&D step: the proof-of-principle experiment at the SPS to study interaction of PSI beams with the laser light


  • Open Access

    Probing LHC halo dynamics using collimator loss rates at 6.5 TeV

    by A. Gorzawski, R. B. Appleby, M. Giovannozzi, A. Mereghetti, D. Mirarchi, S. Redaelli, B. Salvachua, G. Stancari, G. Valentino, J. F. Wagner

    Halo diffusion measurements at the CERN Large Hadron Collider (LHC) were conducted with beams for physics at 6.5 TeV by means of collimator scans, carried out between 2016 and 2018. From the time evolution of the beam losses recorded during a collimator scan, in which collimator jaws are moved in steps toward the beam core cutting beam tails, one can extract information on the halo diffusion and its population as a function of the transverse amplitude. In this paper, results of the first scans performed at different beam intensities for both planes and both beams using the primary collimators of the betatron-cleaning system are presented. The scans were performed with squeezed optics and colliding beams after a few hours of regular physics production, during so-called end-of-fill measurements. Beam losses are measured with ionization chambers close to the collimators, which enable 1 and 100 Hz acquisitions, as well as diamond beam loss monitors, which enable turn-by-turn and bunch-by-bunch acquisitions. Parametric fits of a diffusion model are applied to the time profile of losses, for both total and individual bunch intensity. The analysis of the measurements performed in various conditions was used to estimate the diffusion coefficient as a function of the transverse amplitude and the population of LHC beam tails.