SMSlavko Mocevic

Slavko Mocevic

*This is an algorithmically generated author record based on publicly available information.

Slavko Mocevic has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • PESNet 3.0: A WRN-Based Communication Network With ±0.5 ns Synchronization Error for Large-Scale Modular Power Converters

    by Yu Rong, Zhiyu Shen, Jun Wang, Jianghui Yu, Boran Fan, Slavko Mocevic, Dushan Boroyevich, Rolando Burgos

    Emerging large-scale silicon-carbide (SiC)-based modular power converters are pursuing high-performance distributed control systems (DCSs). In particular, fast-switching-enabled novel control schemes raise the need for minimal synchronization error (SE) of communication networks. This paper presents the development of a proposed power electronics system network (PESNet) 3.0 that features a sub-nanosecond SE and gigabits-per-second data rate. The White Rabbit Network technology, originally developed for particle accelerators, has been embedded in PESNet 3.0 and tailored to be suited for large-scale high-frequency modular power converters. A simplified node-to-node phase-locked loop (N2N-PLL) and an improved precision time protocol model has been proposed to lock both the frequency and phase of two independent clocks on two adjacent nodes. Subsequently, the stability analysis of the N2N-PLL is carried out with its closed-loop transfer function verified by digital perturbation injection. Finally, the experimental validation of PESNet 3.0 is demonstrated at both controller and converter levels. The latter is on a first-of-it-kind 10 kV SiC-MOSFET-based modular converter prototype operating at 12 kV dc-link voltage, 10 kHz switching frequency, and above 100V/ns slew rate, verifying ±0.5 ns SE at 5 Gbps data rate.


  • A Compact High-Power Single-Turn Inductor for 6 kV SiC-based Power Electronics Building Blocks

    by He Song, Jun Wang, Yue Xu, Joshua Stewart, Slavko Mocevic, Igor Cvetkovic, Rolando Burgos, Dushan Boroyevich

    Based on our previous work, this paper presents the follow-up design and testing of a single-turn magnetic-core inductor for 6 kV power electronics building blocks (PEBBs) using 10 kV SiC MOSFET modules. The specifications of the inductor were derived from the switching-cycle control (SCC) principle. The single-turn magnetic core inductor with shielded solid insulation has been concluded to be the most suitable solution based on our prior work. The shielding layer facilitates the insulation design, but it has some side-effects such as shileding losses, shield termination and induced displacement current. Beyond our previous work, a double-layer termination structure is proposed to shrink the size of the termination structure and minimize the electric field strength in air, and quantitative study is conducted regarding the dimensions and permittivity. The displacement current is investigated and recommendations are provided. Two fabrication process methods for winding insulation are investigated and compared, and the one discussed in this paper is chosen to facilitate the mass production for modular multilevel converters (MMC) application. The proposed fabrication process gives 7.34 kV PDIV which meets the insulation requirement. The converter-level tests confirm the effectiveness of the grounding current reduction method.


  • Cell Capacitor Voltage Switching-Cycle Balancing Control for Modular Multilevel Converters

    by Boran Fan, Jun Wang, Jianghui Yu, Slavko Mocevic, Yu Rong, Rolando Burgos, Dushan Boroyevich

    Modular multilevel converters (MMC) with the conventional control are subjected to large capacitor voltage ripples, especially at low-line frequencies. The existing attenuation approaches, such as the second-order or high-frequency harmonic injections, are designed based on average models limiting the achievable performance. This letter aims to greatly increase the control time resolution, investigating the possibility to form the control in the timescale of a switching cycle. The circulating current is allowed to have multiple changes in one switching period. This critical alternation equips the MMC with the capability to achieve voltage balancing in a single switching cycle, shifting the MMC from a long-deemed “line-cycle balancing” converter to a “switching-cycle balancing” converter. The proposed approach is experimentally verified under dc–dc operation, which is the most challenging scenario for conventional controls. Test results under 6 kV dc-link voltage are provided performed with the custom-built 10-kV SiC mosfet -based MMC prototype.


  • Gate-Driver Integrated Junction Temperature Estimation of SiC MOSFET Modules

    by Slavko Mocevic, Vladimir Mitrovic, Jun Wang, Rolando Burgos, Dushan Boroyevich

    SiC MOSFET power modules are becoming global solutions in systems operating in harsh environment, and due to large economic implications, achieving reliability of such systems is of utmost importance. Thereby, this article is focused on improving the reliability of the SiC MOSFETS, accomplished by generating intelligence on the gate driver (GD) with providing insight on real-time behavior of relevant switch information. The device switch current $ {I_{\mathrm {d}}}$ , apart from being used for short-circuit detection assessing the short-term reliability, in the combination with the ON-state drain-to-source voltage $ {V_{\mathrm {ds,\mathrm{\scriptscriptstyle ON}}}}$ enables the possibility of online junction temperature ( $ {T_{\mathrm {J}}}$ ) estimation. The knowledge of $ {T_{\mathrm {J}}}$ can enable active thermal control as well as condition monitoring of the SiC MOSFET device such as state-of-health, remaining useful life, and maintenance scheduling, tackling the long-term reliability aspects. With the aid of a field-programmable gate array (FPGA) on GD, a lookup table (stored in the FLASH memory on GD) containing device output characteristics is assessed, enabling real-time $ {T_{\mathrm {J}}}$ monitoring for both devices in the commercial SiC MOSFET half-bridge module configuration. Following the developed GD prototype, $ {T_{\mathrm {J}}}$ is verified in pulsed operation with maximum error less than 5 °C having excellent repeatability of ±1.2 °C and is furthermore verified in continuous operation showing promising results. In addition, degradation monitoring and aging compensation scheme are discussed, with the goal of maintaining the accuracy of the $T_{\mathrm {j}}$ estimation throughout device’s lifetime.


  • Third Quadrant Conduction Loss of 1.2–10 kV SiC MOSFETs: Impact of Gate Bias Control

    by Ruizhe Zhang, Xiang Lin, Jingcun Liu, Slavko Mocevic, Dong Dong, Yuhao Zhang

    The third quadrant (3rd-quad) conduction of power MOSFETs involves competing current sharing between the MOS channel and the body diode controlled by the gate bias (VG). For 1.2 kV SiC planar MOSFETs, it is well known that a positive VG enables parallel conduction through both channels and reduces the 3rd-quad voltage drop and conduction loss. This work, for the first time, unveils that this fact does not hold for higher-voltage (e.g., 3.3 kV, 10 kV) SiC planar MOSFETs. It is revealed that, once the MOS channel turns on, the body diode in high-voltage MOSFETs turns on at a source-to-drain voltage (VSD) much higher than the built-in potential of the PN junction. As a result, the positive VG could induce a higher voltage drop than the bipolar body diode at high temperatures. A buck converter based on a 10 kV SiC MOSFET half-bridge module was built and tested, which validated that a negative VG control provides the smallest 3rd-quad voltage drop and conduction loss at high temperatures. Finally, the optimal VG control for the 3rd-quad conduction in trench MOSFETs is discussed. These results provide critical device understandings and application guidelines for 1.2-10 kV SiC MOSFETs.


  • Power Cell Design and Assessment Methodology Based on a High-Current 10-kV SiC MOSFET Half-Bridge Module

    by Slavko Mocevic, Jianghui Yu, Yue Xu, Joshua Stewart, Jun Wang, Igor Cvetkovic, Dong Dong, Rolando Burgos, Dushan Boroyevich

    While 10kV silicon-carbide (SiC) MOSFETs are gradually penetrating into medium-voltage (MV) applications, intertwined challenges concerning high-voltage insulation, high dv=dt, protections, and thermal management are simultaneously imposed to MV converters. For the modular multilevel converter, a systematical power-cell design and assessment methodology (DAM) to tackle the unprecedented challenge synergy is essential, and yet, absent. Thereby, this paper aims to develop DAM based on a high-current 10kV SiC MOSFET half-bridge module. An overall introduction of the power cell and a hierarchical DAM workflow is first presented, followed by the comprehensive component-level DAM with details in design challenges, solutions, assessment instruments, procedures, and test results. Subsequently, the DAM is expanded to the power-cell level by exploring its safe operating area associated with switching frequency, power-processing capability, and temperature limit in various operation modes, which in turn, validates the component designs and determines if they need iterations. Following the methodology, the power-cell design is finalized, capable of continuous operation under 6kV, 84A rms, and 10kHz, exhibiting 99.3% efficiency and transient immunity up to 100V=ns.


  • Top Cited Papers

    High-Scalability Enhanced Gate Drivers for SiC MOSFET Modules With Transient Immunity Beyond 100 V/ns

    by Jun Wang, Slavko Mocevic, Rolando Burgos, Dushan Boroyevich

    Silicon-carbide (SiC) transistors with growing readiness for the power converter market have raised an emerging need for high-performance gate driver (GD) units to maximize their remarkable characteristics. In particular, the GD units for the SiC devices that experience extremely fast commutations at the medium-voltage level require powerful driving capability, effective short-circuit (SC) protection, and superb common-mode transient immunity. Thereby, this article presents a systematic enhanced GD (eGD) solution that incorporates three scalable features compatible with almost all the SiC mosfet modules. First, a BJT-based multicell current booster is proposed to attain balanced high driving current, low losses, gate-loop inductance less than 1 nH, and great cross-talk immunity. Second, a nonintrusive Rogowski switch-current sensor with high bandwidth and fair accuracy is developed, capable of detecting SC fault in 86 ns and softly turning off 5 kA SC current in 1 μs. Third, two noise-free isolation architectures are proposed to mitigate common-mode noise-admittance by more than 100 dB. Fundamentals, analytical designs, experimental validations, and scalability discussions of the three techniques are elaborated, respectively. Finally, a 6-kV, 84-A, and 102-V/ns continuous pump-back test is demonstrated, for the first time, to verify the eGD's excellent performance.


  • Comparison and Discussion on Shortcircuit Protections for Silicon-Carbide MOSFET Modules: Desaturation Versus Rogowski Switch-Current Sensor

    by Slavko Mocevic, Jun Wang, Rolando Burgos, Dushan Boroyevich, Marko Jaksic, Constantin Stancu, Brian Peaslee

    Survivability of silicon-carbide (SiC) mosfet modules during short circuit (SC) is essential for modern power electronics systems due to large economic implications. SiC mosfet modules exhibit narrow SC withstand times and generally much lower SC robustness than silicon (Si) insulated-gate bipolar transistors (IGBTs). This puts a critical concern on their utilization, further stressing the importance of reliable protection. This article presents a comprehensive analysis and discussion on the SiC mosfet module SC protection and performance comparison between conventional desaturation detection, previously used for Si IGBT protection, and Rogowski switch-current sensor (RSCS) detection. In addition, this article presents the experimental design for soft turn-off as a reaction to the SC detection to avoid excessive overshoots during the abrupt turn-off of the SC current. To perform different types of SC with various fault inductances on different temperatures, and for the sake of fair comparison under the same conditions, a gate-driver unit for 1.2 kV SiC mosfet half-bridge modules is developed containing both detection methods. The results demonstrate that both methods are successful in protecting the module in all SC types, with superiority of the RSCS detection and concerns for desaturation detection in high-inductance and high dc-bus voltage SC events.