HWHannah E. Wright-Smith

Hannah E. Wright-Smith

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hannah E. Wright-Smith has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a DGCI threshold model for real-time weed detection and herbicide application in turfgrass

    by Samuel T. Kreinberg, Hannah Wright-Smith, Jason A. Davis, John H. McCalla, Michael D. Richardson, Wendell J. Hutchens

    Precision applications of herbicides are gaining interest as a sustainable approach to managing turfgrass pests. For instance, controlling turfgrass weeds with precision application could effectively reduce herbicide volume without sacrificing weed control. Machine learning models have been a common method for precision application, but machine learning requires intensive labor and expertise to collect and label imagery. The objective of this study was to develop and test a new system that uses the dark green color index (DGCI) to precisely apply glyphosate to detect and spray winter weeds in dormant bermudagrass turf. For this study, a sprayer prototype was constructed that used machine vision and DGCI. The prototype consisted of three primary components: 1) a camera that streamed video frames, 2) a control system that stored computer code focused on the integration of DGCI, and 3) solenoid valves that activated upon detection of winter weeds growing in dormant bermudagrass. Four field trials with different weed species and weed densities were established to test the DGCI system among traditional application methods (i.e., broadcast application and manual spot application with a backpack sprayer). In the lowest weed density scenario, the DGCI system accurately detected and sprayed 90% of the weed population, reducing herbicide volume by 62% compared to a broadcast application. Additionally, the DGCI system required less time for treatment than the spot application with a backpack sprayer. The results from these trials suggest that vegetative indices, such as DGCI, have potential in dormant bermudagrass systems to optimize herbicide volume.


  • Open Access

    Greenhouse evaluation of Great Plains native grasses and forbs tolerance to postemergence herbicides used for roadside weed control

    by Rachel C. Woody-Pumford, Matthew B. Bertucci, Mike D. Richardson, Dirk Philipp, Hannah E. Wright-Smith

    To combat the decline in North American grasslands and prairies, innovative strategies to establish new native grass and forb plantings must be considered. Integrated vegetation management entails the use of many practices to cultivate desirable vegetation along roadsides, including mowing, applying herbicides, burning, and replanting. Currently, only a limited selection of postemergence herbicides are available to improve native plant establishment along roadsides. A greenhouse herbicide screen that included four postemergence herbicides registered for use on Conservation Reserve Program (CRP) acres and rights-of-way was conducted to test their safety for use on four native grasses (big bluestem, buffalograss, sideoats grama, and switchgrass) and seven forb species (ashy sunflower, black-eyed Susan, butterfly milkweed, desert false indigo, Illinois bundleflower, Mexican hat plant, and purple coneflower). Clopyralid (689 g ae ha−1), metsulfuron (4.18 g ai ha−1), and quinclorac (418 g ai ha−1) applied at labeled rates caused no injury to the native grass species or butterfly milkweed. However, florpyrauxifen-benzyl (38.4 g ai ha−1) caused significant injury to buffalograss and switchgrass. None of the herbicides tested were universally safe to use on all forb species evaluated in this trial, with each herbicide causing unacceptable injury (≥25%) to one or more forb species. None of the herbicides studied here would be completely safe for use on mixed stands of native grasses and native forbs at the seedling growth stage, indicating that prairie establishment must use alternative chemistries, plant mixes with fewer species, or avoid postemergence applications shortly after emergence of native forbs.


  • Open Access

    Identifying herbicides to manage weeds in a buckwheat cover crop and for the control of volunteers

    by Taylor Randell‐Singleton, Hannah E. Wright‐Smith, Lavesta C. Hand, Jenna C. Vance, A. Stanley Culpepper

    Buckwheat (Fagopyrum esculentum) is a fast‐growing plant that quickly produces a dense groundcover. The utilization of buckwheat as a cover crop in vegetable production could be beneficial to Georgia producers, however for successful adoption, weed control in the cover crop coupled with control of buckwheat volunteers must be achievable. A preemergence (PRE) and a postemergence (POST) experiment were each conducted three times in Ty Ty, GA (2020–2021) addressing these objectives. In the PRE study, acetochlor at 0.56 lb ai acre−1 injured buckwheat up to 16% without negatively influencing growth, suggesting potential for use in buckwheat for weed control. Flumioxazin, fomesafen, halosulfuron, ethalfluralin and S‐metolachlor lacked adequate buckwheat safety. However, flumioxazin at 0.05 lb ai acre−1, fomesafen at 0.19 lb ai acre−1, and halosulfuron at 0.02 lb ai acre−1 were identified as effective options to manage volunteer plants, as control exceeded 80%. In the POST experiment, buckwheat injury from 2,4‐D, clethodim, dicamba, glufosinate, glyphosate, halosulfuron, linuron, paraquat, and prometryn was evaluated, and when considering all evaluation parameters, paraquat (0.50 lb ai acre−1) was the most effective option for the control of buckwheat. This was followed by glufosinate (0.59 and 1.17 lb ai acre−1) and glyphosate (1.20 and 2.40 lb ai acre−1). For potential applications over buckwheat for weed management, clethodim (0.12 lb ai acre−1) was the only POST herbicide that provided adequate crop safety.


  • Open Access

    Herbicide residue detection in cotton as influenced by time, drift rate, and sampling method

    by Hannah E. Wright-Smith, A. Stanley Culpepper, Carrie R. Crabtree, Timothy L. Grey, Taylor M. Randell-Singleton, Jenna C. Vance

    Herbicide drift to sensitive crops can result in significant injury, yield loss, and even crop destruction. When pesticide drift is reported to the Georgia Department of Agriculture (GDA), tissue samples are collected and analyzed for residues. Seven field studies were conducted in 2020 and 2021 in cooperation with the GDA to evaluate the effect of (1) time interval between simulated drift event and sampling, (2) low-dose herbicide rates, and (3) the sample collection methods on detecting herbicide residues in cotton (Gossypium hirsutum L.) foliage. Simulated drift rates of 2,4-D, dicamba, and imazapyr were applied to non-tolerant cotton in the 8- to 9-leaf stage with plant samples collected at 7 or 21 d after treatment (DAT). During collection, plant sampling consisted of removing entire plants or removing new growth occurring after the 7-leaf stage. Visual cotton injury from 2,4-D reached 43% to 75% at 0.001 and 0.004 kg ae ha−1, respectively; for dicamba, it was 9% to 41% at 0.003 or 0.014 kg ae ha−1, respectively; and for imazapyr, it was 1% to 74% with 0.004 and 0.03 kg ae ha−1 rates, respectively. Yield loss was observed with both rates of 2,4-D (11% to 51%) and with the high rate of imazapyr (52%); dicamba did not influence yield. Herbicide residues were detected in 88%, 88%, and 69% of samples collected from plants treated with 2,4-D, dicamba, and imazapyr, respectively, at 7 DAT compared with 25%, 16%, and 22% when samples were collected at 21 DAT, highlighting the importance of sampling quickly after a drift event. Although the interval between drift event and sampling, drift rate, and sampling method can all influence residue detection for 2,4-D, dicamba, and imazapyr, the factor with the greatest influence is the amount of time between drift and sample collection.

  • Open Access

    Response of goosegrass, smooth crabgrass, and newly sprigged hybrid bermudagrass to postemergence herbicides

    by Navdeep Godara, Daewon Koo, Hannah Wright-Smith, Shawn D. Askew

    Postemergence (POST) herbicides that control troublesome weeds during hybrid bermudagrass establishment via sprigs are limited due to potential turfgrass phytotoxicity and herbicide-resistant weeds. Research experiments were conducted in Blacksburg, VA, and Hope, AR, in 2016 and 2023 to evaluate herbicide programs to control goosegrass and smooth crabgrass and the response of hybrid bermudagrass sprigs to POST herbicides applied 3 to 5 wk after establishment (WAE). Another study was conducted to assess the tolerance of ‘Latitude 36’, ‘Tahoma 31’, and ‘TifTuf’ hybrid bermudagrass sprigs to POST herbicides applied 4 to 5 WAE. Thiencarbazone + foramsulfuron + halosulfuron did not injure hybrid bermudagrass > 6% across four cultivars and a total of 10 site-yr but reduced goosegrass and smooth crabgrass cover equivalent to the best-performing treatments. Topramezone + metribuzin injured turfgrass > 25% at 14 d after treatment (DAT), but tank mixing with thiencarbazone + foramsulfuron + halosulfuron reduced injury by 5% to 22%. Quinclorac injured hybrid bermudagrass 17% to 58%, depending on site, which was more than most other treatments. Mesotrione-, quinclorac-, or topramezone-based programs injured hybrid bermudagrass and also reduced turfgrass cover, the dark green color index, and the normalized difference vegetation index, but turfgrass recovered by 28 DAT. Results suggest that turfgrass managers have a variety of herbicides that can control smooth crabgrass and goosegrass during hybrid bermudagrass sprig establishment, but the margin of selectivity is relatively low for mesotrione, quinclorac, and topramezone and may be dependent on herbicide rate or hybrid bermudagrass cultivar.

  • Open Access

    Exploring Chemical and Cultural Weed Management for Industrial Hemp Production in Georgia, USA

    by Hannah E. Wright-Smith, Timothy W. Coolong, A. Stanley Culpepper, Taylor M. Randell-Singleton, Jenna C. Vance

    Industrial hemp (Cannabis sativa) production is complex, with strict regulatory constraints and challenges associated with a lack of labeled pesticides due to its status as a novel crop in the US. Four experiments were conducted in 2020 and 2021 to establish herbicide tolerances for hemp production in the coastal plain of Georgia, USA. Objectives included evaluating hemp response to pretransplant or posttransplant herbicides, determining if planting method influenced herbicide injury from residual preplant applied herbicides, and understanding how plastic mulch may influence hemp flower yields. When applied one day prior to transplanting, maximum hemp crop visual injury was less than 12% compared to the untreated control, with acetochlor, flumioxazin, fomesafen, pendimethalin, and norflurazon while dithiopyr, halosulfuron, isoxaben, and isoxaflutole resulted in greater than 50% injury. Posttransplant applications of S-metolachlor, acetochlor, pendimethalin, and clethodim resulted in less than 15% injury while halosulfuron, metribuzin, trifloxysulfuron, imazethapyr, and prometryn applications resulted in greater than 50% injury to plants. Preplant and posttransplant applied herbicides were found to have little effect on total tetrahydrocannabinol (THC), cannabidiol (CBD), or total cannabinoids in the dry flower after harvest. In a separate experiment, injury from halosulfuron and metribuzin was 52% to 56% less when planted with a mechanical transplanter as compared to the practice of using a transplant wheel to depress a hole in the soil followed by hand transplanting. In the final experiment, hemp dry flower yield in a non-plastic mulched (bareground) system was similar to that in a plastic mulched system. However, early season plant above-ground biomass was less in the plastic mulched system, which may have been due to elevated soil temperatures inhibiting early season growth.


  • Open Access

    Confirming resistance to PPO-inhibiting herbicides applied preemergence and postemergence in a Georgia Palmer amaranth population

    by Taylor Randell-Singleton, Lavesta C. Hand, Jenna C. Vance, Hannah E. Wright-Smith, A. Stanley Culpepper

    Herbicides that inhibit protoporphyrinogen oxidase (PPO) are used in more than 40 agronomic and specialty crops across Georgia to manage weeds through residual and postemergence (POST) control. In 2017, a population of Palmer amaranth exhibiting reduced sensitivity to POST applications of PPO-inhibiting herbicides was identified by the University of Georgia. Seed were collected from the site along with a known sensitive population; distance between the samples was 200 m, increasing the likelihood of similar environmental and genetic characteristics. To quantify sensitivity for both preemergence (PRE) and POST uses, 21 greenhouse dose-response assessments were conducted from 2017 to 2022. After conducting initial rate-response studies, 13 doses per herbicide were chosen for the POST experiment; field use rates of fomesafen (420 g ai ha−1), lactofen (219 g ai ha−1), acifluorfen (420 g ai ha−1), and trifludimoxazin (25 g ai ha−1) ranging from 0× to 4× the field use rate for the susceptible population, and 0× to 40× for the suspect population were applied. Herbicide treatments included adjuvants and were applied to plants 8 to 10 cm in height. Relative resistance factors (RRFs) were calculated for control ratings, mortality, and biomass, and ranged from 105 to 318, 36 to 1,477, 215 to 316, and 9 to 49 for fomesafen, lactofen, acifluorfen, and trifludimoxazin, respectively. In the PRE experiment, herbicide applications included five to nine doses of fomesafen (1× = 210 g ai ha−1), flumioxazin (1× = 57 g ai ha−1), oxyfluorfen (1× = 561 g ai ha−1), and trifludimoxazin (1× = 38 g ai ha−1); doses ranged from 0× to 6× for the suspect population and 0× to 2× for the susceptible population. Visual control, mortality, and biomass RRFs ranged from 3 to 5 for fomesafen, 21 to 31 for flumioxazin, 6 to 22 for oxyfluorfen, and 8 to 38 for trifludimoxazin. Results confirm that a Georgia Palmer amaranth population is resistant to PPO-inhibiting herbicides applied both PRE and POST.


  • Open Access

    Transplant broccoli and collard response to the residual activity of glyphosate applied preplant

    by Hannah E. Wright-Smith, A. Stanley Culpepper, Taylor M. Randell-Singleton, Jenna C. Vance

    Cole crops including broccoli and collard contribute over $119 million to Georgia’s farm gate value yearly. To ensure maximum profitability, these crops must be planted into weed-free fields. Glyphosate is a tool often used to help achieve this goal because of its broad-spectrum activity on weeds coupled with the knowledge that it poses no threat to the succeeding crop when used as directed. However, recent research suggests that with certain soil textures and production systems, the residual soil activity of glyphosate may damage some crops. Therefore, field experiments were conducted in the fall of 2019 and 2020 to evaluate transplanted broccoli and collard response to glyphosate applied preplant onto bare soil and what practical mitigation measures could be implemented to reduce crop injury. Herbicide treatments consisted of 0, 2.5, or 5 kg ae ha-1 glyphosate applied preplant followed by 1) no mitigation measure, 2) tillage, 3) irrigation, or 4) tillage and irrigation prior to transplanting broccoli and collard by hand. When no mitigation was implemented, the residual activity of glyphosate at 2.5 and 5.0 kg ae ha-1 resulted in 43 to 71% and 79 to 93% injury to broccoli and collard transplants, respectively. This resulted in a 35 to 50% reduction in broccoli marketable head weights and 63 to 71% reduction in collard leaf weights. Irrigation reduced visible damage 28 to 48% while tillage reduced injury 43 to 76%, for both crops. Irrigation alleviated yield losses for broccoli but only tillage eliminated yield loss for both crops. Care must be taken when transplanting broccoli and collard into a field recently treated with glyphosate at rates ≥ 2.5 kg ae ha-1. Its residual activity can damage transplants with injury levels influenced by glyphosate rate, and tillage or irrigation after application and prior to planting.


  • Open Access

    Use of florpyrauxifen‐benzyl in non‐flooded rice production systems

    by Hannah E. Wright, Jason K. Norsworthy, Trenton L. Roberts, Robert C. Scott, Jarrod T. Hardke, Edward E. Gbur

    The lack of a flood on rice (Oryza sativa) levees and in furrow‐irrigated rice creates a favorable environment for terrestrial weeds like Palmer amaranth (Amaranthus palmeri S. Wats) to emerge and quickly overtake the crop for a longer portion of the year than in flooded rice culture. Florpyrauxifen‐benzyl is a new auxin herbicide labeled for use in rice that has activity on both grasses and broadleaf weeds, as well as certain sedges. Field experiments were conducted to determine the efficacy of florpyrauxifen‐benzyl in a non‐flooded environment. Experiments were conducted in 2017 and 2018 at the Lon Mann Cotton Research Station in Marianna, AR and the Pine Tree Research Station near Colt, AR to evaluate florpyrauxifen‐benzyl within a herbicide‐based weed control program in furrow‐irrigated rice. Programs evaluated included two preemergence herbicide combinations, four mid‐postemergence combinations, and a late‐postemergence application versus none. Another experiment was conducted at the Pine Tree Research Station in 2017 and 2018 to compare florpyrauxifen‐benzyl with 2,4‐D in different herbicide mixtures for weed control on rice levees. Treatments consisted of several commonly used rice herbicides applied alone and in a mixture with florpyrauxifen‐benzyl and with 2,4‐D. In the furrow‐irrigated rice experiment, programs containing florpyrauxifen‐benzyl in the mid‐postemergence application resulted in higher levels of late‐season Palmer amaranth control (96–98%) compared to the standard mid‐postemergence treatment (85%). Additionally, programs that included a late‐postemergence herbicide application controlled Palmer amaranth (98%) compared to programs where no late‐postemergence herbicide was applied (91%). In the levee experiment, mixtures where florpyrauxifen‐benzyl was used offered comparable control of Palmer amaranth to mixtures containing 2,4‐D. Mixtures where 2,4‐D or florpyrauxifen‐benzyl were used controlled Palmer amaranth better than the individual herbicide applied alone. Results from these experiments indicate florpyrauxifen‐benzyl will sufficiently control Palmer amaranth in a non‐flooded environment, providing a good alternative herbicide and viable weed control option in furrow‐irrigated rice and on rice levees.


  • Open Access

    Characterization of rice cultivar response to florpyrauxifen-benzyl

    by Hannah E. Wright, Jason K. Norsworthy, Trenton L. Roberts, Robert Scott, Jarrod Hardke, Edward E. Gbur

    Many factors such as environment, herbicide rate, growth stage at application, and days between sequential applications can influence the response of a crop to herbicides. Florpyrauxifen-benzyl is a new broad-spectrum, POST herbicide that was commercialized for use in U.S. rice production in 2018. Field experiments were conducted in 2018 at the Pine Tree Research Station (PTRS) near Colt, AR, and the Rice Research and Extension Center (RREC), near Stuttgart, AR, to evaluate crop injury and yield response of three rice cultivars to sequential applications of florpyrauxifen-benzyl. Greenhouse and growth chamber experiments were conducted at the Altheimer Laboratory in Fayetteville, AR, to evaluate cultivar responses when florpyrauxifen-benzyl was applied at 30 or 60 g ae ha−1 to rice exposed to different temperature regimes or at various growth stages. Three rice cultivars were used in all experiments: long-grain variety ‘CL111’, medium-grain variety ‘CL272’, and long-grain hybrid cultivar ‘CLXL745’. CL111 exhibited sufficient tolerance to florpyrauxifen-benzyl with only 10% visible injury and no effect on yield. CL272 showed 15% injury 3 wk after the second application in the field experiment when applications were made 14 d apart. Additionally, 12% injury was observed in greenhouse studies when florpyrauxifen-benzyl was applied at 30 g ae ha−1, averaged over various growth stages at application. Florpyrauxifen-benzyl did not reduce the yield of CL272 in field experiments, indicating that CL272 can recover from florpyrauxifen-benzyl injury. As much as 64% injury was observed for CLXL745 at 3 wk after application (WAA) when sequential herbicide applications were made 4 d apart. High levels of injury occurred in the growth chamber and greenhouse studies for this cultivar as well. Sequential applications of florpyrauxifen-benzyl reduced yields of CLXL745 in nearly all treatments. Data from these experiments suggest that CL272 and CLXL745 are sensitive to sequential applications of florpyrauxifen-benzyl. Growers must follow the prescribed guidelines for using florpyrauxifen-benzyl in these cultivars and others like it.