JVJenna C. Vance

Jenna C. Vance

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jenna C. Vance has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Herbicide program maximizes weed control, yield, and sustainability for squash farmers

    by Jenna Vance, Taylor Randell Singleton, Stanley Culpepper

    Family farms are facing unprecedented challenges with low commodity prices and high input costs, combined with regulatory obstacles that threaten the availability and practical use of pesticides. Ensuring that U.S. agriculture has access to economically effective and safe pest management tools is paramount for the nation and the world as farmers produce safe and affordable food, feed, fiber, and fuel. Field experiments in squash crops were carried out to assess the weed control effectiveness and economic value of a standard herbicide program compared to six nonchemical alternatives. The alternatives included 1) cultivating squash fields multiple times with a sweep plow; 2) cultivating fields multiple times with a tine weeder; 3 and 4) hand weeding to supplement plow or tine weeding efforts to achieve 75% weed control; and 5 and 6) hand weeding to supplement plow or tine weeding to achieve 95% weed control. When herbicides were applied, 98% to 99% control of Palmer amaranth, large crabgrass, and wild radish was achieved at a cost of US$104 ha −1 for the season. Cultivation (with a tine weeder or plow) provided only 36% to 64% control of each weed at a cost of $144 to $207 ha −1 , and yielding 83% to 85% less squash than when herbicides were applied. Supplementing cultivation with 9 to 13 h of hand weeding per hectare achieved approximately 75% control, resulting in weed control costs ranging from $916 to $1,073 ha −1 , with 40% to 47% less squash fruit harvested than when herbicides were applied. To achieve 95% weed control, 92 to 98 h ha −1 of hand weeding was required, with yields being comparable to those when herbicides were applied but weed control costs ranged from $8,344 to $8,527 ha −1 , an increase of 80 to 82 times above the herbicide option. This experiment demonstrates how plant protection efforts can increase crop yield and quality while reducing costly inputs, thus improving the likelihood of safe, affordable, and sustainable food production.

  • Open Access

    Identifying herbicides to manage weeds in a buckwheat cover crop and for the control of volunteers

    by Taylor Randell‐Singleton, Hannah E. Wright‐Smith, Lavesta C. Hand, Jenna C. Vance, A. Stanley Culpepper

    Buckwheat (Fagopyrum esculentum) is a fast‐growing plant that quickly produces a dense groundcover. The utilization of buckwheat as a cover crop in vegetable production could be beneficial to Georgia producers, however for successful adoption, weed control in the cover crop coupled with control of buckwheat volunteers must be achievable. A preemergence (PRE) and a postemergence (POST) experiment were each conducted three times in Ty Ty, GA (2020–2021) addressing these objectives. In the PRE study, acetochlor at 0.56 lb ai acre−1 injured buckwheat up to 16% without negatively influencing growth, suggesting potential for use in buckwheat for weed control. Flumioxazin, fomesafen, halosulfuron, ethalfluralin and S‐metolachlor lacked adequate buckwheat safety. However, flumioxazin at 0.05 lb ai acre−1, fomesafen at 0.19 lb ai acre−1, and halosulfuron at 0.02 lb ai acre−1 were identified as effective options to manage volunteer plants, as control exceeded 80%. In the POST experiment, buckwheat injury from 2,4‐D, clethodim, dicamba, glufosinate, glyphosate, halosulfuron, linuron, paraquat, and prometryn was evaluated, and when considering all evaluation parameters, paraquat (0.50 lb ai acre−1) was the most effective option for the control of buckwheat. This was followed by glufosinate (0.59 and 1.17 lb ai acre−1) and glyphosate (1.20 and 2.40 lb ai acre−1). For potential applications over buckwheat for weed management, clethodim (0.12 lb ai acre−1) was the only POST herbicide that provided adequate crop safety.


  • Open Access

    Herbicide residue detection in cotton as influenced by time, drift rate, and sampling method

    by Hannah E. Wright-Smith, A. Stanley Culpepper, Carrie R. Crabtree, Timothy L. Grey, Taylor M. Randell-Singleton, Jenna C. Vance

    Herbicide drift to sensitive crops can result in significant injury, yield loss, and even crop destruction. When pesticide drift is reported to the Georgia Department of Agriculture (GDA), tissue samples are collected and analyzed for residues. Seven field studies were conducted in 2020 and 2021 in cooperation with the GDA to evaluate the effect of (1) time interval between simulated drift event and sampling, (2) low-dose herbicide rates, and (3) the sample collection methods on detecting herbicide residues in cotton (Gossypium hirsutum L.) foliage. Simulated drift rates of 2,4-D, dicamba, and imazapyr were applied to non-tolerant cotton in the 8- to 9-leaf stage with plant samples collected at 7 or 21 d after treatment (DAT). During collection, plant sampling consisted of removing entire plants or removing new growth occurring after the 7-leaf stage. Visual cotton injury from 2,4-D reached 43% to 75% at 0.001 and 0.004 kg ae ha−1, respectively; for dicamba, it was 9% to 41% at 0.003 or 0.014 kg ae ha−1, respectively; and for imazapyr, it was 1% to 74% with 0.004 and 0.03 kg ae ha−1 rates, respectively. Yield loss was observed with both rates of 2,4-D (11% to 51%) and with the high rate of imazapyr (52%); dicamba did not influence yield. Herbicide residues were detected in 88%, 88%, and 69% of samples collected from plants treated with 2,4-D, dicamba, and imazapyr, respectively, at 7 DAT compared with 25%, 16%, and 22% when samples were collected at 21 DAT, highlighting the importance of sampling quickly after a drift event. Although the interval between drift event and sampling, drift rate, and sampling method can all influence residue detection for 2,4-D, dicamba, and imazapyr, the factor with the greatest influence is the amount of time between drift and sample collection.

  • Open Access

    An integrated approach to delaying herbicide resistance in Palmer amaranth (Amaranthus palmeri) by quantifying selection for resistance in a 2,4-D-based cotton production system

    by Taylor Randell-Singleton, Lavesta C. Hand, Jenna C. Vance, A. Stanley Culpepper

    Integrated weed management practices that reduce selection for resistance on herbicides are critical to delay resistance. To quantify the reduction in selection for resistance placed on Palmer amaranth from 2,4-D applied postemergence in cotton, an experiment was conducted three times in Georgia during 2020 and 2021 evaluating the benefits of (i) a cover crop, (ii) preemergence herbicides, and (iii) timeliness of applications. When a timely total-postemergence program of glyphosate + 2,4-D was applied three times over the season in a conventionally tilled system, 281,690 glyphosate-resistant Palmer amaranth plants ha–1 were exposed to 2,4-D. Over 61,500 of these plants were exposed to multiple 2,4-D applications. Altering the production system to conservation tillage, and including a rolled-rye cover crop, reduced the total number of plants exposed to 2,4-D for the season by 72% and the number of plants exposed multiple times by 60%. Even more effective, including a mixture of residual preemergence herbicides reduced the number of plants exposed to 2,4-D at least once over 99.9%, and reduced multiple exposures over 99.3% for the season; this benefit was observed for both conventional and conservation tillage systems. Delaying the initial application of the total-postemergence program did not influence the number of Palmer amaranth plants treated at least once but increased the number of plants treated multiple times by a factor of 3.7 times. As a result of early-season weed competition, cotton height and yield reductions were also associated with both lack of preemergence residuals and delayed postemergence applications. When considering the goal of minimizing the number of Palmer amaranth treated with a postemergence application of 2,4-D in a cotton system, the preemergence was the most effective option followed by (fb) the cover crop fb making timely postemergence applications. However, the most effective approach was to utilize each of these tactics in the same growing season.


  • Open Access

    Confirming resistance to PPO-inhibiting herbicides applied preemergence and postemergence in a Georgia Palmer amaranth population

    by Taylor Randell-Singleton, Lavesta C. Hand, Jenna C. Vance, Hannah E. Wright-Smith, A. Stanley Culpepper

    Herbicides that inhibit protoporphyrinogen oxidase (PPO) are used in more than 40 agronomic and specialty crops across Georgia to manage weeds through residual and postemergence (POST) control. In 2017, a population of Palmer amaranth exhibiting reduced sensitivity to POST applications of PPO-inhibiting herbicides was identified by the University of Georgia. Seed were collected from the site along with a known sensitive population; distance between the samples was 200 m, increasing the likelihood of similar environmental and genetic characteristics. To quantify sensitivity for both preemergence (PRE) and POST uses, 21 greenhouse dose-response assessments were conducted from 2017 to 2022. After conducting initial rate-response studies, 13 doses per herbicide were chosen for the POST experiment; field use rates of fomesafen (420 g ai ha−1), lactofen (219 g ai ha−1), acifluorfen (420 g ai ha−1), and trifludimoxazin (25 g ai ha−1) ranging from 0× to 4× the field use rate for the susceptible population, and 0× to 40× for the suspect population were applied. Herbicide treatments included adjuvants and were applied to plants 8 to 10 cm in height. Relative resistance factors (RRFs) were calculated for control ratings, mortality, and biomass, and ranged from 105 to 318, 36 to 1,477, 215 to 316, and 9 to 49 for fomesafen, lactofen, acifluorfen, and trifludimoxazin, respectively. In the PRE experiment, herbicide applications included five to nine doses of fomesafen (1× = 210 g ai ha−1), flumioxazin (1× = 57 g ai ha−1), oxyfluorfen (1× = 561 g ai ha−1), and trifludimoxazin (1× = 38 g ai ha−1); doses ranged from 0× to 6× for the suspect population and 0× to 2× for the susceptible population. Visual control, mortality, and biomass RRFs ranged from 3 to 5 for fomesafen, 21 to 31 for flumioxazin, 6 to 22 for oxyfluorfen, and 8 to 38 for trifludimoxazin. Results confirm that a Georgia Palmer amaranth population is resistant to PPO-inhibiting herbicides applied both PRE and POST.


  • Open Access

    Transplant broccoli and collard response to the residual activity of glyphosate applied preplant

    by Hannah E. Wright-Smith, A. Stanley Culpepper, Taylor M. Randell-Singleton, Jenna C. Vance

    Cole crops including broccoli and collard contribute over $119 million to Georgia’s farm gate value yearly. To ensure maximum profitability, these crops must be planted into weed-free fields. Glyphosate is a tool often used to help achieve this goal because of its broad-spectrum activity on weeds coupled with the knowledge that it poses no threat to the succeeding crop when used as directed. However, recent research suggests that with certain soil textures and production systems, the residual soil activity of glyphosate may damage some crops. Therefore, field experiments were conducted in the fall of 2019 and 2020 to evaluate transplanted broccoli and collard response to glyphosate applied preplant onto bare soil and what practical mitigation measures could be implemented to reduce crop injury. Herbicide treatments consisted of 0, 2.5, or 5 kg ae ha-1 glyphosate applied preplant followed by 1) no mitigation measure, 2) tillage, 3) irrigation, or 4) tillage and irrigation prior to transplanting broccoli and collard by hand. When no mitigation was implemented, the residual activity of glyphosate at 2.5 and 5.0 kg ae ha-1 resulted in 43 to 71% and 79 to 93% injury to broccoli and collard transplants, respectively. This resulted in a 35 to 50% reduction in broccoli marketable head weights and 63 to 71% reduction in collard leaf weights. Irrigation reduced visible damage 28 to 48% while tillage reduced injury 43 to 76%, for both crops. Irrigation alleviated yield losses for broccoli but only tillage eliminated yield loss for both crops. Care must be taken when transplanting broccoli and collard into a field recently treated with glyphosate at rates ≥ 2.5 kg ae ha-1. Its residual activity can damage transplants with injury levels influenced by glyphosate rate, and tillage or irrigation after application and prior to planting.


  • Interval between sequential glufosinate applications influences weed control in cotton

    by Taylor M. Randell, Lavesta C. Hand, Jenna C. Vance, A. Stanley Culpepper

    Dicamba and 2,4-D systems control many problematic weeds; however, drift to susceptible crops can be a concern in diverse production areas. Glufosinate-based systems are an alternative, but current recommended rates of glufosinate can result in variable control. Research was conducted in 2017 and 2018 to investigate the optimum time interval between sequential glufosinate applications and determine if the addition of glyphosate with glufosinate is beneficial for controlling Palmer amaranth and annual grasses in cotton. The interval between sequential applications (1, 3, 5, 7, 10, or 14 d or no second spray) was the whole plot and herbicide option (glufosinate or glufosinate plus glyphosate) was the subplot. Combined over herbicides, Palmer amaranth 15- to 20-cm tall (at four locations) was controlled 98% to 99% with sequential intervals of 1 to 7 d compared with 70% to 88% with intervals of 10 or 14 d. Lowest biomass weight and population densities were noted with 1- to 7-d intervals. Large crabgrass 15- to 20-cm tall (at five locations) was controlled 93% to 98% with glufosinate applications 3- to 7-d apart as compared with 76% to 81% with applications 10- to 14-d apart. Lowest biomass weights were observed with 1- to 7-d intervals. When glufosinate controlled grass less than 93%, adding glyphosate was beneficial. Neither interval between sequential applications nor herbicide option influenced cotton yield. Shorter time intervals between sequential application and including glyphosate can improve the effectiveness of a glufosinate-based system in managing Palmer amaranth and large crabgrass.