Yulia Levchenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yulia Levchenko has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandra Horobets
Poltava University of Economics and Trade
5 shared publications - Олена Калашник
Полтавський державний аграрний університет
4 shared publications - Світлана Мороз
Полтавський державний аграрний університет
3 shared publications - Aleksandra Horobetc
Poltava University of Economics and Trade Kovalya str., 3, Poltava, Ukraine, 36014
2 shared publications - Aleksey Zagorulko
State Biotechnological University
2 shared publications - Anzhela Boroday
Poltava University of Economics and Trade Kovalya str., 3, Poltava, Ukraine, 36014
2 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 6-15
Improvement of a rotary film apparatus with local heat supply and secondary heat recovery
Об’єктом дослідження є процес плівкового уварювання термолабільних багатокомпонентних пюреподібних мас у роторно-плівковому апараті з локалізованим теплопідведенням, самопритискними скребково-розподільними лопатями та рекуперацією теплоти вторинної пари. Вирішується проблема підвищення ефективності уварювання мас інтенсифікацією теплопередачі та рекуперації теплоти за зменшення теплового навантаження на продукт. Удосконалено роторно-плівковий апарат, конструктивними особливостями якого є локалізоване теплопідведення, використання самопритискних скребково-розподільних лопатей та рекуперація теплоти вторинної пари. Конструктивні відмінності створюють умови для формування стабільної плівкової течії з циклічно-оновлювальним плівковим шаром без використання класичних високотемпературних проміжних теплоносіїв. Передбачено використання теплової енергії вторинної пари для попереднього підігрівання вхідної пюреподібної маси. Проведено апробацію апарата під час уварювання багатокомпонентного пюре на основі яблука, топінамбура та гарбуза. Визначено, що підвищення температури уварювання з 55°С до 75°С призводить до зниження граничної напруги зсуву пюре з діапазону 22,1…26,4 Па до 10,2…12,2 Па, а також ефективної в’язкості діапазону 16,2…19,4 Па·с до 7,2…8,7 Па·с. Визначено раціональну область режимів уварювання при витраті дослідної пюреподібної маси – 0,80…1,70 мл/с. При витраті термолабільної маси на рівні 1,3·10–3 кг/с практичне використання самопритискної скребково-розподільної лопаті з локальним теплопідведенням формує підвищення коефіцієнту тепловіддачі з 2890 Вт/(м2·К) до 3540 Вт/(м2·К). Рекуперація теплоти вторинної пари за рахунок впровадження сепараційно-рекуперативного простору забезпечує попереднє підігрівання термолабільної пюреподібної маси з 22°С до 35…43°С в залежності від температури уварювання. Так, при уварюванні при 65°С забезпечується повернення до 70,3 кДж/кг теплоти, а отже і скорочення потреби у витраті теплоти на попереднє підігрівання, фактично на 44,2% та зменшення загального теплового навантаження на технологічний процес приблизно на 5,3%
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 6-15
Open AccessImprovement of a rotary film apparatus with local heat supply and secondary heat recovery
Об’єктом дослідження є процес плівкового уварювання термолабільних багатокомпонентних пюреподібних мас у роторно-плівковому апараті з локалізованим теплопідведенням, самопритискними скребково-розподільними лопатями та рекуперацією теплоти вторинної пари. Вирішується проблема підвищення ефективності уварювання мас інтенсифікацією теплопередачі та рекуперації теплоти за зменшення теплового навантаження на продукт. Удосконалено роторно-плівковий апарат, конструктивними особливостями якого є локалізоване теплопідведення, використання самопритискних скребково-розподільних лопатей та рекуперація теплоти вторинної пари. Конструктивні відмінності створюють умови для формування стабільної плівкової течії з циклічно-оновлювальним плівковим шаром без використання класичних високотемпературних проміжних теплоносіїв. Передбачено використання теплової енергії вторинної пари для попереднього підігрівання вхідної пюреподібної маси. Проведено апробацію апарата під час уварювання багатокомпонентного пюре на основі яблука, топінамбура та гарбуза. Визначено, що підвищення температури уварювання з 55°С до 75°С призводить до зниження граничної напруги зсуву пюре з діапазону 22,1…26,4 Па до 10,2…12,2 Па, а також ефективної в’язкості діапазону 16,2…19,4 Па·с до 7,2…8,7 Па·с. Визначено раціональну область режимів уварювання при витраті дослідної пюреподібної маси – 0,80…1,70 мл/с. При витраті термолабільної маси на рівні 1,3·10–3 кг/с практичне використання самопритискної скребково-розподільної лопаті з локальним теплопідведенням формує підвищення коефіцієнту тепловіддачі з 2890 Вт/(м2·К) до 3540 Вт/(м2·К). Рекуперація теплоти вторинної пари за рахунок впровадження сепараційно-рекуперативного простору забезпечує попереднє підігрівання термолабільної пюреподібної маси з 22°С до 35…43°С в залежності від температури уварювання. Так, при уварюванні при 65°С забезпечується повернення до 70,3 кДж/кг теплоти, а отже і скорочення потреби у витраті теплоти на попереднє підігрівання, фактично на 44,2% та зменшення загального теплового навантаження на технологічний процес приблизно на 5,3%
- Open Access
- 29 August 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 4 (3(84)) , 60-66
Comparison of certain safety and quality indicators of developed chocolate paste with organic and inorganic raw materials
The object of the research is the developed chocolate spreads from organic raw materials. The problem to be solved is to compare the quality and safety indicators of organic and inorganic food products. The composition of the “Sea Buckthorn” chocolate paste includes almonds, natural cocoa powder, cocoa butter, cane sugar, sea buckthorn oil, powdered milk, and flax bran. The “Hemp” chocolate paste differs in that instead of sea buckthorn oil, it contains hemp oil. The organoleptic evaluation of the pastes was carried out using a 35-point scale developed. The mass fraction of moisture was determined by drying to constant mass. The fatty acid composition was determined by gas chromatography. The content of heavy metal salts was determined by the colorimetric method and the flameless atomic absorption method. Biological, chemical, and physical hazardous factors were analyzed at each stage of the production of chocolate pastes. The results of the organoleptic evaluation indicate that all samples meet the “excellent” quality level. No significant differences were found between organic and inorganic chocolate spreads made according to the same recipes. The mass fraction of moisture in the developed products was within the normal range and did not exceed 3%. More fats were found in organic chocolate spreads than in inorganic ones. In the “Sea Buckthorn Organic” chocolate spread – by 1.48 g / 100 g; in the “Hemp Organic” chocolate spread – by 1.86 g / 100 g. The results of the study show that the content of polyunsaturated fatty acids in chocolate spreads made from organic raw materials significantly exceeds the content of similar acids in inorganic chocolate spreads. The content of linolenic acid is higher by 0.58 g / 100 g in “Organic Sea Buckthorn Organic” paste and by 1 g / 100 g in “Organic Hemp” chocolate paste compared to similar pastes made from inorganic raw materials.The lead content is 2.77 times lower in “Organic Sea Buckthorn” oil; 2.45 times lower in “Organic Hemp” oil than in similar inorganic chocolate spreads. A very significant difference is noted in the cadmium content: 3 and 4.5 times lower, respectively. The critical control points of production are sterilization of containers and heat treatment of chocolate spreads.
- 29 August 2025
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 4 (3(84)) , 60-66
Open AccessComparison of certain safety and quality indicators of developed chocolate paste with organic and inorganic raw materials
The object of the research is the developed chocolate spreads from organic raw materials. The problem to be solved is to compare the quality and safety indicators of organic and inorganic food products. The composition of the “Sea Buckthorn” chocolate paste includes almonds, natural cocoa powder, cocoa butter, cane sugar, sea buckthorn oil, powdered milk, and flax bran. The “Hemp” chocolate paste differs in that instead of sea buckthorn oil, it contains hemp oil. The organoleptic evaluation of the pastes was carried out using a 35-point scale developed. The mass fraction of moisture was determined by drying to constant mass. The fatty acid composition was determined by gas chromatography. The content of heavy metal salts was determined by the colorimetric method and the flameless atomic absorption method. Biological, chemical, and physical hazardous factors were analyzed at each stage of the production of chocolate pastes. The results of the organoleptic evaluation indicate that all samples meet the “excellent” quality level. No significant differences were found between organic and inorganic chocolate spreads made according to the same recipes. The mass fraction of moisture in the developed products was within the normal range and did not exceed 3%. More fats were found in organic chocolate spreads than in inorganic ones. In the “Sea Buckthorn Organic” chocolate spread – by 1.48 g / 100 g; in the “Hemp Organic” chocolate spread – by 1.86 g / 100 g. The results of the study show that the content of polyunsaturated fatty acids in chocolate spreads made from organic raw materials significantly exceeds the content of similar acids in inorganic chocolate spreads. The content of linolenic acid is higher by 0.58 g / 100 g in “Organic Sea Buckthorn Organic” paste and by 1 g / 100 g in “Organic Hemp” chocolate paste compared to similar pastes made from inorganic raw materials.The lead content is 2.77 times lower in “Organic Sea Buckthorn” oil; 2.45 times lower in “Organic Hemp” oil than in similar inorganic chocolate spreads. A very significant difference is noted in the cadmium content: 3 and 4.5 times lower, respectively. The critical control points of production are sterilization of containers and heat treatment of chocolate spreads.
- Open Access
- 26 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (136)) , 25-32
Determining the heat and mass exchange efficiency of a scraper heat exchanger for heating food semi-finished products
This study's object is the process of heating fruit and berry purees made from apple, apricot, and honeysuckle. This paper reports an improved structure of a scraper heat exchanger for heating viscous liquid food products based on fruit and berry raw materials (purees, pastes). One of the main elements of the modernization is heating with a flexible film resistive electric heater of the radiant type instead of the conventional steam system, which has made it possible to eliminate steam fittings and reduce energy consumption. Additional equipment of the heat exchanger with a hinged blade with a remote plate enables turbulization of the product flow in the heat exchange zone, contributing to the formation of a stable film flow on the heating surface, which significantly improves the efficiency of heat transfer. The experimental and computational studies revealed the dependence of the heat transfer coefficient on raw material consumption and the frequency of rotation of the apparatus shaft. It was established that the heat transfer coefficient depends on the product flow rate and, after reaching the maximum (13…15) 10–3 kg/s, it decreases. The influence of rotor speed is less significant and is manifested mainly during the transition from 1.0 to 1.5 s⁻1. Comparative analysis revealed that the use of an improved blade with a remote plate makes it possible to increase the heat transfer coefficient by 1.2 times compared to the conventional design. Calculations of specific heat consumption showed its decrease from 250 to 222 kJ/kg, which is a saving of 12.5%. The proposed structural solutions make it possible to ensure the stability of temperature regimes, reduce energy consumption, improve the quality of heat treatment and process automation. This is especially important for the processing of heat-sensitive and dense products in the food industry
- 26 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (136)) , 25-32
Open AccessDetermining the heat and mass exchange efficiency of a scraper heat exchanger for heating food semi-finished products
This study's object is the process of heating fruit and berry purees made from apple, apricot, and honeysuckle. This paper reports an improved structure of a scraper heat exchanger for heating viscous liquid food products based on fruit and berry raw materials (purees, pastes). One of the main elements of the modernization is heating with a flexible film resistive electric heater of the radiant type instead of the conventional steam system, which has made it possible to eliminate steam fittings and reduce energy consumption. Additional equipment of the heat exchanger with a hinged blade with a remote plate enables turbulization of the product flow in the heat exchange zone, contributing to the formation of a stable film flow on the heating surface, which significantly improves the efficiency of heat transfer. The experimental and computational studies revealed the dependence of the heat transfer coefficient on raw material consumption and the frequency of rotation of the apparatus shaft. It was established that the heat transfer coefficient depends on the product flow rate and, after reaching the maximum (13…15) 10–3 kg/s, it decreases. The influence of rotor speed is less significant and is manifested mainly during the transition from 1.0 to 1.5 s⁻1. Comparative analysis revealed that the use of an improved blade with a remote plate makes it possible to increase the heat transfer coefficient by 1.2 times compared to the conventional design. Calculations of specific heat consumption showed its decrease from 250 to 222 kJ/kg, which is a saving of 12.5%. The proposed structural solutions make it possible to ensure the stability of temperature regimes, reduce energy consumption, improve the quality of heat treatment and process automation. This is especially important for the processing of heat-sensitive and dense products in the food industry
- Open Access
- 2 October 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (102) , 67-71
Features of yogurt technology with germinated grains
Among the wide assortment of dairy products, a special role is played by high-protein fermented milk products – yogurts, the production and assortment of which must be significantly increased. It is yogurts that are in great demand among the population as a light, complete snack, and they have long since become components of various dishes. Therefore, we consider it expedient to expand the range of such a necessary fermented milk product as yogurt by adding sprouted cereal grains to its composition, as the need to consume nutritionally complete products is growing and there is a need to create dairy products with a new, improved composition. The work presents the technology of making yogurt using germinated grains of cereal crops of the “CHOICE” company. Yogurt is made according to the classical technology, the bacterial preparation YoFlex Creamy 2.0 and Premium 2.0 was used for the fermentation of the normalized mixture. 4 samples of yogurt were obtained: Control, sample 1 – using an additive in the amount of 3 %, sample 2 – using an additive in the amount of 6 %, sample 3 – using an additive in the amount of 10 %. A study of dairy raw materials for compliance with the requirements of current regulatory documentation was carried out, as well as a study of the finished product – yogurt with sprouted cereal grains for compliance of organoleptic, physico-chemical and microbiological indicators with the requirements of the Standard. The titrated acidity in milk was determined according to DSTU 3624-92 “Milk and dairy products. Titrometric methods of determining acidity”. The active acidity of milk and yogurt was measured with an electronic pH meter “Muttler Toledo MP220” and according to GOST 19881-74 “Potentiometric analyzers for controlling the pH of milk and products. General technical conditions”. Organoleptic indicators were determined according to DSTU 3662: 2018 “Cow's milk. Procurement requirements”. Determination of protein, lactose, mass fraction of fat and density of milk was carried out on the “Ecomilk” device. The general rules of sampling were carried out according to DSTU IDF 117B:2003. Acidity, as well as organoleptic indicators and safety indicators were controlled in the finished product. It was established that the optimal percentage of the use of sprouted grains is 6 %, because such a percentage has a positive effect on the formation of the taste and aroma of yogurt, which is very important for the consumer. We recommend consuming yogurt within 12–14 days, as yogurt loses its qualities and safety characteristics in the future.
- 2 October 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (102) , 67-71
Open AccessFeatures of yogurt technology with germinated grains
Among the wide assortment of dairy products, a special role is played by high-protein fermented milk products – yogurts, the production and assortment of which must be significantly increased. It is yogurts that are in great demand among the population as a light, complete snack, and they have long since become components of various dishes. Therefore, we consider it expedient to expand the range of such a necessary fermented milk product as yogurt by adding sprouted cereal grains to its composition, as the need to consume nutritionally complete products is growing and there is a need to create dairy products with a new, improved composition. The work presents the technology of making yogurt using germinated grains of cereal crops of the “CHOICE” company. Yogurt is made according to the classical technology, the bacterial preparation YoFlex Creamy 2.0 and Premium 2.0 was used for the fermentation of the normalized mixture. 4 samples of yogurt were obtained: Control, sample 1 – using an additive in the amount of 3 %, sample 2 – using an additive in the amount of 6 %, sample 3 – using an additive in the amount of 10 %. A study of dairy raw materials for compliance with the requirements of current regulatory documentation was carried out, as well as a study of the finished product – yogurt with sprouted cereal grains for compliance of organoleptic, physico-chemical and microbiological indicators with the requirements of the Standard. The titrated acidity in milk was determined according to DSTU 3624-92 “Milk and dairy products. Titrometric methods of determining acidity”. The active acidity of milk and yogurt was measured with an electronic pH meter “Muttler Toledo MP220” and according to GOST 19881-74 “Potentiometric analyzers for controlling the pH of milk and products. General technical conditions”. Organoleptic indicators were determined according to DSTU 3662: 2018 “Cow's milk. Procurement requirements”. Determination of protein, lactose, mass fraction of fat and density of milk was carried out on the “Ecomilk” device. The general rules of sampling were carried out according to DSTU IDF 117B:2003. Acidity, as well as organoleptic indicators and safety indicators were controlled in the finished product. It was established that the optimal percentage of the use of sprouted grains is 6 %, because such a percentage has a positive effect on the formation of the taste and aroma of yogurt, which is very important for the consumer. We recommend consuming yogurt within 12–14 days, as yogurt loses its qualities and safety characteristics in the future.
- Open Access
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 84-90
Improvement pre-treatment technology of meat for the preparation in restaurants
The article examines the issue of the use of local and tropical raw materials, and spices in the technology of pre-processing of meat, and the quality and safety indicators of meat semi-finished products in the process of technological processing. The use of pineapple juice in pickling technology makes it possible to break down proteins and fats due to the enzyme bromelain, which destroys pathogenic bacteria in the intestine; promotes muscle relaxation, and relieves spasms. In addition, the juice of these tropical fruits is rich in vitamin C, beta-carotene, vitamins A, PP, and group B. Of the minerals, it contains the most potassium and sodium, calcium, magnesium, phosphorus, and iron. The most attractive substance included in the composition of pineapple juice is considered to be plum berries rich in organic acids, such as citric and malic, contain vitamins of group B, as well as PP, A, and E, a small content of ascorbic acid and pectin. Regarding the use of cherry juice in pickling technology, its value lies in the high content of organic acids and sugars, tannins, dietary fibers and pectin, vitamins A, E, C, PP, B vitamins, calcium, potassium, sodium, magnesium, phosphorus, iron Cherry juice is the most useful and valuable, the level of nutrients and antioxidants in it is much higher than in the juices of other fruits and berries. Dark berries are especially rich in useful substances and vitamins. The chemical composition of fruit raw materials makes it possible to predict that the selected juices have preservative and antioxidant properties and therefore can be effective components of marinades for meat semi-finished products. The purpose of the work is to study the influence of pickling on the quality and safety indicators of meat semi-finished products in the process of technological processing using local and tropical berries, and spicy plants. 10 different versions of compositions for marinating pork have been developed. In the course of experimental research, marinade formulations and the duration of the marinating process were established, which provided the best taste qualities of the finished product. It was determined that the greatest loss of proteins was observed in the control sample with acetic acid, and the lowest in samples with marinade based on undiluted juices. In the samples of semi-finished products based on diluted juices, protein loss is lower than in the control, which ensures a higher biological value of products from them. The moisture content increases in all pickled semi-finished products, the intensity of the process depends on the concentration of fruit juices in the marinades.
- 6 April 2024
- Published by Stepan Gzhytskyi National University of Veterinary Medicine and Biotechnologies Lviv in Scientific Messenger of LNU of Veterinary Medicine and Biotechnologies. Series: Food Technologies
- Vol. 26 (101) , 84-90
Open AccessImprovement pre-treatment technology of meat for the preparation in restaurants
The article examines the issue of the use of local and tropical raw materials, and spices in the technology of pre-processing of meat, and the quality and safety indicators of meat semi-finished products in the process of technological processing. The use of pineapple juice in pickling technology makes it possible to break down proteins and fats due to the enzyme bromelain, which destroys pathogenic bacteria in the intestine; promotes muscle relaxation, and relieves spasms. In addition, the juice of these tropical fruits is rich in vitamin C, beta-carotene, vitamins A, PP, and group B. Of the minerals, it contains the most potassium and sodium, calcium, magnesium, phosphorus, and iron. The most attractive substance included in the composition of pineapple juice is considered to be plum berries rich in organic acids, such as citric and malic, contain vitamins of group B, as well as PP, A, and E, a small content of ascorbic acid and pectin. Regarding the use of cherry juice in pickling technology, its value lies in the high content of organic acids and sugars, tannins, dietary fibers and pectin, vitamins A, E, C, PP, B vitamins, calcium, potassium, sodium, magnesium, phosphorus, iron Cherry juice is the most useful and valuable, the level of nutrients and antioxidants in it is much higher than in the juices of other fruits and berries. Dark berries are especially rich in useful substances and vitamins. The chemical composition of fruit raw materials makes it possible to predict that the selected juices have preservative and antioxidant properties and therefore can be effective components of marinades for meat semi-finished products. The purpose of the work is to study the influence of pickling on the quality and safety indicators of meat semi-finished products in the process of technological processing using local and tropical berries, and spicy plants. 10 different versions of compositions for marinating pork have been developed. In the course of experimental research, marinade formulations and the duration of the marinating process were established, which provided the best taste qualities of the finished product. It was determined that the greatest loss of proteins was observed in the control sample with acetic acid, and the lowest in samples with marinade based on undiluted juices. In the samples of semi-finished products based on diluted juices, protein loss is lower than in the control, which ensures a higher biological value of products from them. The moisture content increases in all pickled semi-finished products, the intensity of the process depends on the concentration of fruit juices in the marinades.
- Open Access
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (8 (125)) , 16-23
Efficiency of gas preparation technology using a block drying plant
The object of research is the technology of gas drying using a mobile block installation. The task to ensure compliance of the composition of natural gas with the values of a number of basic characteristics before its supply to main pipelines has been solved. The results of a complex analysis of the gas preparation technology of the deposit, which is located in an agricultural area and is at a late stage of exploitation, are reported. It was established that in order to ensure the supply of conditioned gas to the system of main gas pipelines under the conditions of low gas pressures, the construction of gas treatment plants is required, first of all, for its drying. The method of ensuring gas quality considered in the current paper involves the use of a block-type gas drying installation as part of a low-temperature separation installation and a source of artificial cold. As the latter, it is envisaged to use a freon-refrigerating unit. The study shows that the proposed block gas drying units can be unified for different gas productivity and are characterized by relatively low capital and operating costs. The main advantages of the introduction of gas preparation block installations and the scheme of connecting the installation to the existing line are presented. Based on the results of the economic efficiency indicators, it was established that the use of a block gas drying unit is a profitable project with the value of the accumulated reduced free cash flow of almost 843 thousand conditional units; the investment payback period is 3 years. The results could be effectively used in the gas distribution sector, provided that the gas is extracted from a field close to exhaustion, which is characterized by low reservoir pressures
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (8 (125)) , 16-23
Open AccessEfficiency of gas preparation technology using a block drying plant
The object of research is the technology of gas drying using a mobile block installation. The task to ensure compliance of the composition of natural gas with the values of a number of basic characteristics before its supply to main pipelines has been solved. The results of a complex analysis of the gas preparation technology of the deposit, which is located in an agricultural area and is at a late stage of exploitation, are reported. It was established that in order to ensure the supply of conditioned gas to the system of main gas pipelines under the conditions of low gas pressures, the construction of gas treatment plants is required, first of all, for its drying. The method of ensuring gas quality considered in the current paper involves the use of a block-type gas drying installation as part of a low-temperature separation installation and a source of artificial cold. As the latter, it is envisaged to use a freon-refrigerating unit. The study shows that the proposed block gas drying units can be unified for different gas productivity and are characterized by relatively low capital and operating costs. The main advantages of the introduction of gas preparation block installations and the scheme of connecting the installation to the existing line are presented. Based on the results of the economic efficiency indicators, it was established that the use of a block gas drying unit is a profitable project with the value of the accumulated reduced free cash flow of almost 843 thousand conditional units; the investment payback period is 3 years. The results could be effectively used in the gas distribution sector, provided that the gas is extracted from a field close to exhaustion, which is characterized by low reservoir pressures
- Open Access
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc33-00,p. 209-216
ENTREPRENEURSHIP IN THE HOSPITALITY INDUSTRY: GLOBAL TRENDS, THE UKRAINIAN CONTEXT, AND DEVELOPMENT PROSPECTS
The article is dedicated to the analysis of current trends in entrepreneurial activity within the hospitality industry in both global and Ukrainian contexts. It examines the impact of digitalization, automation, artificial intelligence, inclusivity, and s
- 30 September 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc33-00,p. 209-216
Open AccessENTREPRENEURSHIP IN THE HOSPITALITY INDUSTRY: GLOBAL TRENDS, THE UKRAINIAN CONTEXT, AND DEVELOPMENT PROSPECTS
The article is dedicated to the analysis of current trends in entrepreneurial activity within the hospitality industry in both global and Ukrainian contexts. It examines the impact of digitalization, automation, artificial intelligence, inclusivity, and s
- Open Access
- 30 August 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in SWorld-Ger Conference proceedings
- No. gec40-00,p. 115-122
PEDAGOGICAL CHALLENGES AND INNOVATIONS IN THE TRAINING OF HORECA SPECIALISTS: UKRAINIAN AND GLOBAL CONTEXTS
The study examines the system of professional training for specialists in the HoReCa sector within the context of Ukrainian and international educational practices. It analyzes the main challenges facing domestic vocational education under crisis conditio
- 30 August 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in SWorld-Ger Conference proceedings
- No. gec40-00,p. 115-122
Open AccessPEDAGOGICAL CHALLENGES AND INNOVATIONS IN THE TRAINING OF HORECA SPECIALISTS: UKRAINIAN AND GLOBAL CONTEXTS
The study examines the system of professional training for specialists in the HoReCa sector within the context of Ukrainian and international educational practices. It analyzes the main challenges facing domestic vocational education under crisis conditio
- Open Access
- 30 July 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc38-00,p. 113-120
RESPONSIBLE BEVERAGE SERVICE AS A SYSTEM FOR MANAGING SAFETY AND SUSTAINABILITY IN HOSPITALITY ESTABLISHMENTS
The study substantiates the concept of Responsible Beverage Service (RBS) as a systematic approach to minimizing alcohol-related risks in hospitality establishments. A structural and logical model is proposed that encompasses three core RBS dimensions, in
- 30 July 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc38-00,p. 113-120
Open AccessRESPONSIBLE BEVERAGE SERVICE AS A SYSTEM FOR MANAGING SAFETY AND SUSTAINABILITY IN HOSPITALITY ESTABLISHMENTS
The study substantiates the concept of Responsible Beverage Service (RBS) as a systematic approach to minimizing alcohol-related risks in hospitality establishments. A structural and logical model is proposed that encompasses three core RBS dimensions, in
- Open Access
- 30 May 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc18-01,p. 3-6
PROSPECTS OF THE USE AND ANALYSIS OF BIOMASS TYPES OF THE POLTAVA REGION AS SOURCES OF ELECTRICAL ENERGY
The fight against energy and environmental problems continues continuously and at an ever-increasing pace. The development of renewable energy sources in the world is connected with limited energy resources. Most of all in Ukraine, the use of biomass ene
- 30 May 2023
- Published by Ukrainian Research and Design Institute of Building Materials and Products in Sworld-Us Conference proceedings
- No. usc18-01,p. 3-6
Open AccessPROSPECTS OF THE USE AND ANALYSIS OF BIOMASS TYPES OF THE POLTAVA REGION AS SOURCES OF ELECTRICAL ENERGY
The fight against energy and environmental problems continues continuously and at an ever-increasing pace. The development of renewable energy sources in the world is connected with limited energy resources. Most of all in Ukraine, the use of biomass ene