DKDustin Kendig

Dustin Kendig

*This is an algorithmically generated author record based on publicly available information.

Dustin Kendig has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nanoscale Electro-Thermal Interactions in Algan/gan High Electron Mobility Transistors

    by Bikramjit Chatterjee, Canberk Dundar, Dustin Kendig, Daniel Shoemaker, Hyungtak Kim, Nazli Donmezer, Sukwon Choi

    Self-heating in AlGaN/GaN high electron mobility transistors (HEMTs) negatively impacts device performance and reliability. Under nominal operating conditions, a hot-spot in the device channel develops under the drain-side corner of the gate due to a concentration of volumetric heat generation leading to non-equilibrium carrier interactions and non-Fourier heat conduction. These

  • Open Access

    Nanoscale Electro-Thermal Interactions in Algan/gan High Electron Mobility Transistors

    by Bikramjit Chatterjee, Canberk Dundar, Dustin Kendig, Daniel Shoemaker, Hyungtak Kim, Nazli Donmezer, Sukwon Choi

    Self-heating in AlGaN/GaN high electron mobility transistors (HEMTs) negatively impacts device performance and reliability. Under nominal operating conditions, a hot-spot in the device channel develops under the drain-side corner of the gate due to a concentration of volumetric heat generation leading to non-equilibrium carrier interactions and non-Fourier heat conduction. These

  • Device-Level Multidimensional Thermal Dynamics With Implications for Current and Future Wide Bandgap Electronics

    by James Spencer Lundh, Yiwen Song, Bikramjit Chatterjee, Albert G. Baca, Robert J. Kaplar, Andrew M. Armstrong, Andrew A. Allerman, Brianna A. Klein, Dustin Kendig, Hyungtak Kim, et al.

    Researchers have been extensively studying wide-bandgap (WBG) semiconductor materials such as gallium nitride (GaN) with an aim to accomplish an improvement in size, weight, and power of power electronics beyond current devices based on silicon (Si). However, the increased operating power densities and reduced areal footprints of WBG device technologies result in significant levels of self-heating that can ultimately restrict device operation through performance degradation, reliability issues, and failure. Typically, self-heating in WBG devices is studied using a single measurement technique while operating the device under steady-state direct current measurement conditions. However, for switching applications, this steady-state thermal characterization may lose significance since the high power dissipation occurs during fast transient switching events. Therefore, it can be useful to probe the WBG devices under transient measurement conditions in order to better understand the thermal dynamics of these systems in practical applications. In this work, the transient thermal dynamics of an AlGaN/GaN high electron mobility transistor (HEMT) were studied using thermoreflectance thermal imaging and Raman thermometry. Also, the proper use of iterative pulsed measurement schemes such as thermoreflectance thermal imaging to determine the steady-state operating temperature of devices is discussed. These studies are followed with subsequent transient thermal characterization to accurately probe the self-heating from steady-state down to submicrosecond pulse conditions using both thermoreflectance thermal imaging and Raman thermometry with temporal resolutions down to 15 ns.


  • Dynamic Temperature Measurements of a GaN DC–DC Boost Converter at MHz Frequencies

    by Cristian Matei, Jonas Urbonas, Haris Votsi, Dustin Kendig, Peter H. Aaen

    For reliability estimations, gallium nitride transistors require accurate estimations of the peak operating temperatures within the device. This paper presents a new application of thermoreflectance-based temperature measurements performed on a gallium nitride high electron mobility transistor. The submicron spatial and nanosecond temporal resolutions of the measurement system enables for the first time, the dynamic temperature measurement of a transistor operating up to 5 MHz. The GaN transistor is first biased in class-A and excited with a 1 MHz AC signal to demonstrate the dynamic temperature measurement. The transistor is then incorporated in a 20-40 V DC/DC boost converter to measure the dynamic temperature distributions across the semiconductor die operating under real loading conditions at 1 and 5 MHz switching frequencies. This technique captures the temperature variations that occur during the switching of the transistor and the recorded peak temperatures indicate an increase of up to 7.4 C compared with conventional measurement and simulation methodologies.